! Started logfile: J1211-1926_X_1997_07_02_yyk_uvs.log on Mon Jan  8 05:37:11 2007
obs J1211-1926_X_1997_07_02_yyk_uva.fits
! Reading UV FITS file: J1211-1926_X_1997_07_02_yyk_uva.fits
! AN table 1: 142 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.904225 visibilities/baseline/integration-bin.
! Found source: J1211-1926
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 753 lines of history.
! 
! Reading 23112 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1211-1926_X_1997_07_02_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.503285 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6732 mas, bmaj=1.774 mas, bpa=-1.127 degrees
! Estimated noise=1443.36 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0415041 Jy
! Component: 100  -  total flux cleaned = 0.0632692 Jy
! Total flux subtracted in 100 components = 0.0632692 Jy
! Clean residual min=-0.019769 max=0.019844 Jy/beam
! Clean residual mean=0.000062 rms=0.007997 Jy/beam
! Combined flux in latest and established models = 0.0632692 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 47 model components to the UV plane model.
! The established model now contains 47 components and 0.0632692 Jy
! 
! Correcting IF 1.
!  A total of 141 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.499138Jy  sigma=0.002436
! Fit after  self-cal, rms=0.498919Jy  sigma=0.002434
! Inverting map and beam 
! Estimated beam: bmin=0.6732 mas, bmaj=1.774 mas, bpa=-1.127 degrees
! Estimated noise=1443.36 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8806 mas, bmaj=2.268 mas, bpa=-3.164 degrees
! Estimated noise=716.635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 0.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0388969 Jy
! Component: 100  -  total flux cleaned = 0.0546463 Jy
! Component: 150  -  total flux cleaned = 0.0587091 Jy
! Component: 200  -  total flux cleaned = 0.0592047 Jy
! Total flux subtracted in 200 components = 0.0592047 Jy
! Clean residual min=-0.008715 max=0.017020 Jy/beam
! Clean residual mean=0.000044 rms=0.002851 Jy/beam
! Combined flux in latest and established models = 0.122474 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 83 components and 0.122474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.497084Jy  sigma=0.002416
! Fit after  self-cal, rms=0.497028Jy  sigma=0.002416
! Inverting map 
! Added new window around map position (15.2, 8.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193624 Jy
! Component: 100  -  total flux cleaned = 0.027288 Jy
! Component: 150  -  total flux cleaned = 0.030724 Jy
! Component: 200  -  total flux cleaned = 0.0323782 Jy
! Total flux subtracted in 200 components = 0.0323782 Jy
! Clean residual min=-0.008649 max=0.009328 Jy/beam
! Clean residual mean=0.000046 rms=0.002198 Jy/beam
! Combined flux in latest and established models = 0.154852 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 101 components and 0.154852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.496318Jy  sigma=0.002411
! Fit after  self-cal, rms=0.496238Jy  sigma=0.002410
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8806 x 2.268 at -3.164 degrees (North through East)
! Clean map  min=-0.0070483  max=0.044894 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.496238Jy  sigma=0.002410
! Fit after  self-cal, rms=0.496238Jy  sigma=0.002410
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.496238Jy  sigma=0.002410
! Fit after  self-cal, rms=0.496238Jy  sigma=0.002410
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8806 mas, bmaj=2.268 mas, bpa=-3.164 degrees
! Estimated noise=716.635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00755726 Jy
! Component: 100  -  total flux cleaned = 0.00871394 Jy
! Component: 150  -  total flux cleaned = 0.00887649 Jy
! Component: 200  -  total flux cleaned = 0.00902207 Jy
! Total flux subtracted in 200 components = 0.00902207 Jy
! Clean residual min=-0.007307 max=0.008064 Jy/beam
! Clean residual mean=0.000037 rms=0.002015 Jy/beam
! Combined flux in latest and established models = 0.163874 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 114 components and 0.163874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.496037Jy  sigma=0.002409
! Fit after  self-cal, rms=0.496026Jy  sigma=0.002409
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.496026Jy  sigma=0.002409
! Fit after  self-cal, rms=0.495209Jy  sigma=0.002403
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12.8, 8.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113418 Jy
! Component: 100  -  total flux cleaned = 0.0149341 Jy
! Component: 150  -  total flux cleaned = 0.0162206 Jy
! Component: 200  -  total flux cleaned = 0.017145 Jy
! Total flux subtracted in 200 components = 0.017145 Jy
! Clean residual min=-0.007726 max=0.007267 Jy/beam
! Clean residual mean=0.000020 rms=0.001951 Jy/beam
! Combined flux in latest and established models = 0.181019 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 133 components and 0.181019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.494761Jy  sigma=0.002401
! Fit after  self-cal, rms=0.494562Jy  sigma=0.002399
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8806 x 2.268 at -3.164 degrees (North through East)
! Clean map  min=-0.0065978  max=0.046563 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.361 mas, bmaj=5.109 mas, bpa=6.025 degrees
! Estimated noise=917.305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573791 Jy
! Component: 100  -  total flux cleaned = 0.00698151 Jy
! Component: 150  -  total flux cleaned = 0.00731754 Jy
! Component: 200  -  total flux cleaned = 0.00749932 Jy
! Total flux subtracted in 200 components = 0.00749932 Jy
! Clean residual min=-0.006305 max=0.005451 Jy/beam
! Clean residual mean=0.000044 rms=0.001852 Jy/beam
! Combined flux in latest and established models = 0.188518 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 159 components and 0.188518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.494522Jy  sigma=0.002399
! Fit after  self-cal, rms=0.494430Jy  sigma=0.002398
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6732 mas, bmaj=1.774 mas, bpa=-1.127 degrees
! Estimated noise=1443.36 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.067935 Jy
! Component: 100  -  total flux cleaned = 0.113506 Jy
! Component: 150  -  total flux cleaned = 0.141772 Jy
! Component: 200  -  total flux cleaned = 0.15336 Jy
! Total flux subtracted in 200 components = 0.15336 Jy
! Clean residual min=-0.022698 max=0.025236 Jy/beam
! Clean residual mean=0.000040 rms=0.008778 Jy/beam
! Combined flux in latest and established models = 0.15336 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.15336 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8806 mas, bmaj=2.268 mas, bpa=-3.164 degrees
! Estimated noise=716.635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -0.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.018024 Jy
! Component: 100  -  total flux cleaned = 0.0230752 Jy
! Component: 150  -  total flux cleaned = 0.0244922 Jy
! Component: 200  -  total flux cleaned = 0.0257358 Jy
! Total flux subtracted in 200 components = 0.0257358 Jy
! Clean residual min=-0.007851 max=0.010651 Jy/beam
! Clean residual mean=0.000095 rms=0.002235 Jy/beam
! Combined flux in latest and established models = 0.179096 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 61 components and 0.179096 Jy
! Inverting map 
! Added new window around map position (-20.2, 9.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108275 Jy
! Component: 100  -  total flux cleaned = 0.0119681 Jy
! Component: 150  -  total flux cleaned = 0.0127631 Jy
! Component: 200  -  total flux cleaned = 0.0135186 Jy
! Total flux subtracted in 200 components = 0.0135186 Jy
! Clean residual min=-0.007303 max=0.008664 Jy/beam
! Clean residual mean=0.000063 rms=0.002006 Jy/beam
! Combined flux in latest and established models = 0.192614 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 82 components and 0.192614 Jy
! Inverting map 
! Added new window around map position (-25.2, 12.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589248 Jy
! Component: 100  -  total flux cleaned = 0.00759625 Jy
! Component: 150  -  total flux cleaned = 0.00804867 Jy
! Component: 200  -  total flux cleaned = 0.0080398 Jy
! Total flux subtracted in 200 components = 0.0080398 Jy
! Clean residual min=-0.007063 max=0.007757 Jy/beam
! Clean residual mean=0.000048 rms=0.001925 Jy/beam
! Combined flux in latest and established models = 0.200654 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 96 components and 0.200654 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.361 mas, bmaj=5.109 mas, bpa=6.025 degrees
! Estimated noise=917.305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00245331 Jy
! Component: 100  -  total flux cleaned = 0.0029735 Jy
! Component: 150  -  total flux cleaned = 0.00266588 Jy
! Component: 200  -  total flux cleaned = 0.00210832 Jy
! Total flux subtracted in 200 components = 0.00210832 Jy
! Clean residual min=-0.007255 max=0.006508 Jy/beam
! Clean residual mean=0.000108 rms=0.002014 Jy/beam
! Combined flux in latest and established models = 0.202762 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 122 components and 0.202762 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8806 mas, bmaj=2.268 mas, bpa=-3.164 degrees
! Estimated noise=716.635 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000901558 Jy
! Component: 100  -  total flux cleaned = -0.00131499 Jy
! Component: 150  -  total flux cleaned = -0.00172004 Jy
! Component: 200  -  total flux cleaned = -0.00172338 Jy
! Total flux subtracted in 200 components = -0.00172338 Jy
! Clean residual min=-0.006840 max=0.007533 Jy/beam
! Clean residual mean=0.000059 rms=0.001869 Jy/beam
! Combined flux in latest and established models = 0.201039 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 136 components and 0.201039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.493514Jy  sigma=0.002394
! Fit after  self-cal, rms=0.493355Jy  sigma=0.002393
wmodel J1211-1926_X_1997_07_02_yyk\_map.mod
! Writing 136 model components to file: J1211-1926_X_1997_07_02_yyk_map.mod
wobs J1211-1926_X_1997_07_02_yyk\_uvs.fits
! Writing UV FITS file: J1211-1926_X_1997_07_02_yyk_uvs.fits
wwins J1211-1926_X_1997_07_02_yyk\_map.win
! wwins: Wrote 6 windows to J1211-1926_X_1997_07_02_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261305 Jy
! Component: 100  -  total flux cleaned = 0.00309045 Jy
! Component: 150  -  total flux cleaned = 0.00320587 Jy
! Component: 200  -  total flux cleaned = 0.00321146 Jy
! Component: 250  -  total flux cleaned = 0.00331362 Jy
! Component: 300  -  total flux cleaned = 0.00350631 Jy
! Component: 350  -  total flux cleaned = 0.00341122 Jy
! Component: 400  -  total flux cleaned = 0.00378283 Jy
! Component: 450  -  total flux cleaned = 0.00396399 Jy
! Component: 500  -  total flux cleaned = 0.00414411 Jy
! Component: 550  -  total flux cleaned = 0.00396911 Jy
! Component: 600  -  total flux cleaned = 0.00388212 Jy
! Component: 650  -  total flux cleaned = 0.00337165 Jy
! Component: 700  -  total flux cleaned = 0.00295172 Jy
! Component: 750  -  total flux cleaned = 0.00278427 Jy
! Component: 800  -  total flux cleaned = 0.00220835 Jy
! Component: 850  -  total flux cleaned = 0.00188407 Jy
! Component: 900  -  total flux cleaned = 0.00172373 Jy
! Component: 950  -  total flux cleaned = 0.00164513 Jy
! Component: 1000  -  total flux cleaned = 0.00140863 Jy
! Component: 1050  -  total flux cleaned = 0.00109581 Jy
! Component: 1100  -  total flux cleaned = 0.00109573 Jy
! Component: 1150  -  total flux cleaned = 0.000865119 Jy
! Component: 1200  -  total flux cleaned = 0.000485152 Jy
! Component: 1250  -  total flux cleaned = 0.000335074 Jy
! Component: 1300  -  total flux cleaned = 0.000186176 Jy
! Component: 1350  -  total flux cleaned = 3.95019e-05 Jy
! Component: 1400  -  total flux cleaned = -3.36368e-05 Jy
! Component: 1450  -  total flux cleaned = -0.000106262 Jy
! Component: 1500  -  total flux cleaned = -3.33734e-05 Jy
! Component: 1550  -  total flux cleaned = -0.000105228 Jy
! Component: 1600  -  total flux cleaned = -0.000176465 Jy
! Component: 1650  -  total flux cleaned = -3.44289e-05 Jy
! Component: 1700  -  total flux cleaned = 3.46985e-05 Jy
! Component: 1750  -  total flux cleaned = 0.000313669 Jy
! Component: 1800  -  total flux cleaned = 0.000313681 Jy
! Component: 1850  -  total flux cleaned = 0.00051966 Jy
! Component: 1900  -  total flux cleaned = 0.000451628 Jy
! Component: 1950  -  total flux cleaned = 0.000858728 Jy
! Component: 2000  -  total flux cleaned = 0.000926867 Jy
! Total flux subtracted in 2048 components = 0.00106134 Jy
! Clean residual min=-0.003727 max=0.003899 Jy/beam
! Clean residual mean=0.000041 rms=0.001349 Jy/beam
! Combined flux in latest and established models = 0.2021 Jy
keep
! Adding 154 model components to the UV plane model.
! The established model now contains 290 components and 0.2021 Jy
![Exited script file: muppet]
wmap "J1211-1926_X_1997_07_02_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8806 x 2.268 at -3.164 degrees (North through East)
! Clean map  min=-0.0064508  max=0.050951 Jy/beam
! Writing clean map to FITS file: J1211-1926_X_1997_07_02_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0509507 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00134766 
device "J1211-1926_X_1997_07_02_yyk\_map.eps/VPS"
! Attempting to open device: 'J1211-1926_X_1997_07_02_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -7.93508 7.93508 15.8702 31.7403 63.4807
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.004 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.05 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8806 x 2.268 at -3.164 degrees (North through East)
! Clean map  min=-0.0064508  max=0.050951 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1211-1926_X_1997_07_02_yyk\_map.gif/gif"
! Attempting to open device: 'J1211-1926_X_1997_07_02_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1211-1926_X_1997_07_02_yyk_uvs.log closed on Mon Jan  8 05:37:21 2007