! Started logfile: J1209-2406_X_1997_08_27_yyk_uvs.log on Mon Jan  8 05:36:07 2007
obs J1209-2406_X_1997_08_27_yyk_uva.fits
! Reading UV FITS file: J1209-2406_X_1997_08_27_yyk_uva.fits
! AN table 1: 145 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.977471 visibilities/baseline/integration-bin.
! Found source: J1209-2406
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 701 lines of history.
! 
! Reading 25512 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1209-2406_X_1997_08_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.451768 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.689 mas, bmaj=1.757 mas, bpa=-1.599 degrees
! Estimated noise=1356.9 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.263748 Jy
! Component: 100  -  total flux cleaned = 0.341739 Jy
! Total flux subtracted in 100 components = 0.341739 Jy
! Clean residual min=-0.026548 max=0.058428 Jy/beam
! Clean residual mean=0.000031 rms=0.008189 Jy/beam
! Combined flux in latest and established models = 0.341739 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.341739 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.312298Jy  sigma=0.001579
! Fit after  self-cal, rms=0.309652Jy  sigma=0.001564
! Inverting map and beam 
! Estimated beam: bmin=0.689 mas, bmaj=1.757 mas, bpa=-1.599 degrees
! Estimated noise=1356.94 mJy/beam.
! Added new window around map position (-1.2, 0.8).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0712861 Jy
! Component: 100  -  total flux cleaned = 0.107683 Jy
! Total flux subtracted in 100 components = 0.107683 Jy
! Clean residual min=-0.017722 max=0.025697 Jy/beam
! Clean residual mean=-0.000000 rms=0.004919 Jy/beam
! Combined flux in latest and established models = 0.449422 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.449422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.297452Jy  sigma=0.001477
! Fit after  self-cal, rms=0.296497Jy  sigma=0.001472
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8821 mas, bmaj=2.272 mas, bpa=-5.445 degrees
! Estimated noise=798.91 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.030361 Jy
! Component: 100  -  total flux cleaned = 0.041147 Jy
! Component: 150  -  total flux cleaned = 0.0432804 Jy
! Component: 200  -  total flux cleaned = 0.0446405 Jy
! Total flux subtracted in 200 components = 0.0446405 Jy
! Clean residual min=-0.012886 max=0.019227 Jy/beam
! Clean residual mean=0.000031 rms=0.004469 Jy/beam
! Combined flux in latest and established models = 0.494062 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.494062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.295140Jy  sigma=0.001459
! Fit after  self-cal, rms=0.294936Jy  sigma=0.001458
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8821 x 2.272 at -5.445 degrees (North through East)
! Clean map  min=-0.01176  max=0.3125 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.984446
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.17     KP        1.21     
!   LA        0.97     MK        0.98     NL        0.99     OV        0.98     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00044
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.08     KP        1.22     
!   LA        0.94     MK        0.95     NL        0.98     OV        1.03     
!   PT        0.90     SC        0.99     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.98803
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.19     KP        1.20     
!   LA        0.96     MK        0.95     NL        0.97     OV        0.99     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.98124
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.93     HN        1.23     KP        1.20     
!   LA        0.95     MK        0.92     NL        0.97     OV        0.99     
!   PT        0.96     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.294936Jy  sigma=0.001458
! Fit after  self-cal, rms=0.307725Jy  sigma=0.001443
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.307725Jy  sigma=0.001443
! Fit after  self-cal, rms=0.307735Jy  sigma=0.001443
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8713 mas, bmaj=2.246 mas, bpa=-6.277 degrees
! Estimated noise=769.191 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00831985 Jy
! Component: 100  -  total flux cleaned = -0.00874887 Jy
! Component: 150  -  total flux cleaned = -0.00890539 Jy
! Component: 200  -  total flux cleaned = -0.009012 Jy
! Total flux subtracted in 200 components = -0.009012 Jy
! Clean residual min=-0.009759 max=0.013254 Jy/beam
! Clean residual mean=-0.000019 rms=0.002789 Jy/beam
! Combined flux in latest and established models = 0.48505 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 0.48505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.307032Jy  sigma=0.001441
! Fit after  self-cal, rms=0.306969Jy  sigma=0.001441
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.306969Jy  sigma=0.001441
! Fit after  self-cal, rms=0.278193Jy  sigma=0.001275
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183331 Jy
! Component: 100  -  total flux cleaned = 0.0260566 Jy
! Component: 150  -  total flux cleaned = 0.0297536 Jy
! Component: 200  -  total flux cleaned = 0.0303963 Jy
! Total flux subtracted in 200 components = 0.0303963 Jy
! Clean residual min=-0.011883 max=0.011531 Jy/beam
! Clean residual mean=-0.000058 rms=0.002781 Jy/beam
! Combined flux in latest and established models = 0.515447 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 65 components and 0.515446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.277263Jy  sigma=0.001269
! Fit after  self-cal, rms=0.274597Jy  sigma=0.001254
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8713 x 2.246 at -6.277 degrees (North through East)
! Clean map  min=-0.011963  max=0.31634 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.274597Jy  sigma=0.001254
! Fit after  self-cal, rms=0.342026Jy  sigma=0.001233
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.342026Jy  sigma=0.001233
! Fit after  self-cal, rms=0.341683Jy  sigma=0.001231
! Inverting map and beam 
! Estimated beam: bmin=0.8728 mas, bmaj=2.259 mas, bpa=-6.172 degrees
! Estimated noise=760.427 mJy/beam.
! Added new window around map position (-4.2, 2.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100044 Jy
! Component: 100  -  total flux cleaned = 0.014867 Jy
! Component: 150  -  total flux cleaned = 0.0161346 Jy
! Component: 200  -  total flux cleaned = 0.0160093 Jy
! Total flux subtracted in 200 components = 0.0160093 Jy
! Clean residual min=-0.006009 max=0.003860 Jy/beam
! Clean residual mean=-0.000004 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.531456 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 93 components and 0.531456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.341381Jy  sigma=0.001229
! Fit after  self-cal, rms=0.341243Jy  sigma=0.001228
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.341243Jy  sigma=0.001228
! Fit after  self-cal, rms=0.342999Jy  sigma=0.001225
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.342999Jy  sigma=0.001225
! Fit after  self-cal, rms=0.342968Jy  sigma=0.001225
! Inverting map and beam 
! Estimated beam: bmin=0.8725 mas, bmaj=2.263 mas, bpa=-6.084 degrees
! Estimated noise=758.071 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014242 Jy
! Component: 100  -  total flux cleaned = 0.00219393 Jy
! Component: 150  -  total flux cleaned = 0.00208572 Jy
! Component: 200  -  total flux cleaned = 0.002088 Jy
! Total flux subtracted in 200 components = 0.002088 Jy
! Clean residual min=-0.005339 max=0.003997 Jy/beam
! Clean residual mean=-0.000002 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.533544 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 97 components and 0.533544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.342840Jy  sigma=0.001225
! Fit after  self-cal, rms=0.342793Jy  sigma=0.001224
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.328 mas, bmaj=5.509 mas, bpa=4.371 degrees
! Estimated noise=976.788 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000309061 Jy
! Component: 100  -  total flux cleaned = -1.88384e-05 Jy
! Component: 150  -  total flux cleaned = 5.46068e-05 Jy
! Component: 200  -  total flux cleaned = -2.45836e-06 Jy
! Total flux subtracted in 200 components = -2.45836e-06 Jy
! Clean residual min=-0.004088 max=0.005243 Jy/beam
! Clean residual mean=-0.000008 rms=0.001304 Jy/beam
! Combined flux in latest and established models = 0.533541 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 108 components and 0.533541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.342760Jy  sigma=0.001224
! Fit after  self-cal, rms=0.342678Jy  sigma=0.001224
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6862 mas, bmaj=1.74 mas, bpa=-2.005 degrees
! Estimated noise=1309.75 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.280759 Jy
! Component: 100  -  total flux cleaned = 0.373056 Jy
! Component: 150  -  total flux cleaned = 0.42396 Jy
! Component: 200  -  total flux cleaned = 0.45381 Jy
! Total flux subtracted in 200 components = 0.45381 Jy
! Clean residual min=-0.009950 max=0.011945 Jy/beam
! Clean residual mean=0.000020 rms=0.002371 Jy/beam
! Combined flux in latest and established models = 0.453809 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.453809 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8725 mas, bmaj=2.263 mas, bpa=-6.084 degrees
! Estimated noise=758.071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0286493 Jy
! Component: 100  -  total flux cleaned = 0.0435853 Jy
! Component: 150  -  total flux cleaned = 0.0535999 Jy
! Component: 200  -  total flux cleaned = 0.0606788 Jy
! Total flux subtracted in 200 components = 0.0606788 Jy
! Clean residual min=-0.004936 max=0.004513 Jy/beam
! Clean residual mean=0.000007 rms=0.001223 Jy/beam
! Combined flux in latest and established models = 0.514488 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 60 components and 0.514488 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.328 mas, bmaj=5.509 mas, bpa=4.371 degrees
! Estimated noise=976.788 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00774573 Jy
! Component: 100  -  total flux cleaned = 0.0119166 Jy
! Component: 150  -  total flux cleaned = 0.014265 Jy
! Component: 200  -  total flux cleaned = 0.0153682 Jy
! Total flux subtracted in 200 components = 0.0153682 Jy
! Clean residual min=-0.003882 max=0.005171 Jy/beam
! Clean residual mean=-0.000006 rms=0.001263 Jy/beam
! Combined flux in latest and established models = 0.529856 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 84 components and 0.529856 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8725 mas, bmaj=2.263 mas, bpa=-6.084 degrees
! Estimated noise=758.071 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104304 Jy
! Component: 100  -  total flux cleaned = 0.00113542 Jy
! Component: 150  -  total flux cleaned = 0.00113595 Jy
! Component: 200  -  total flux cleaned = 0.00113353 Jy
! Total flux subtracted in 200 components = 0.00113353 Jy
! Clean residual min=-0.003989 max=0.004032 Jy/beam
! Clean residual mean=-0.000003 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.53099 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 94 components and 0.53099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.342445Jy  sigma=0.001223
! Fit after  self-cal, rms=0.342347Jy  sigma=0.001223
wmodel J1209-2406_X_1997_08_27_yyk\_map.mod
! Writing 94 model components to file: J1209-2406_X_1997_08_27_yyk_map.mod
wobs J1209-2406_X_1997_08_27_yyk\_uvs.fits
! Writing UV FITS file: J1209-2406_X_1997_08_27_yyk_uvs.fits
wwins J1209-2406_X_1997_08_27_yyk\_map.win
! wwins: Wrote 3 windows to J1209-2406_X_1997_08_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000215749 Jy
! Component: 100  -  total flux cleaned = -0.000800861 Jy
! Component: 150  -  total flux cleaned = -0.00104231 Jy
! Component: 200  -  total flux cleaned = -0.00104249 Jy
! Component: 250  -  total flux cleaned = -0.000986748 Jy
! Component: 300  -  total flux cleaned = -0.00108904 Jy
! Component: 350  -  total flux cleaned = -0.00118882 Jy
! Component: 400  -  total flux cleaned = -0.00128628 Jy
! Component: 450  -  total flux cleaned = -0.00137995 Jy
! Component: 500  -  total flux cleaned = -0.00151656 Jy
! Component: 550  -  total flux cleaned = -0.00173757 Jy
! Component: 600  -  total flux cleaned = -0.0019095 Jy
! Component: 650  -  total flux cleaned = -0.00199379 Jy
! Component: 700  -  total flux cleaned = -0.00199336 Jy
! Component: 750  -  total flux cleaned = -0.0021153 Jy
! Component: 800  -  total flux cleaned = -0.0020755 Jy
! Component: 850  -  total flux cleaned = -0.00211478 Jy
! Component: 900  -  total flux cleaned = -0.00211625 Jy
! Component: 950  -  total flux cleaned = -0.00215375 Jy
! Component: 1000  -  total flux cleaned = -0.00222855 Jy
! Component: 1050  -  total flux cleaned = -0.00233771 Jy
! Component: 1100  -  total flux cleaned = -0.00226575 Jy
! Component: 1150  -  total flux cleaned = -0.00230078 Jy
! Component: 1200  -  total flux cleaned = -0.00226585 Jy
! Component: 1250  -  total flux cleaned = -0.00233378 Jy
! Component: 1300  -  total flux cleaned = -0.00229955 Jy
! Component: 1350  -  total flux cleaned = -0.00229885 Jy
! Component: 1400  -  total flux cleaned = -0.00220024 Jy
! Component: 1450  -  total flux cleaned = -0.00213572 Jy
! Component: 1500  -  total flux cleaned = -0.0021031 Jy
! Component: 1550  -  total flux cleaned = -0.00191586 Jy
! Component: 1600  -  total flux cleaned = -0.0019469 Jy
! Component: 1650  -  total flux cleaned = -0.00188588 Jy
! Component: 1700  -  total flux cleaned = -0.00188539 Jy
! Component: 1750  -  total flux cleaned = -0.0017961 Jy
! Component: 1800  -  total flux cleaned = -0.0017366 Jy
! Component: 1850  -  total flux cleaned = -0.00170733 Jy
! Component: 1900  -  total flux cleaned = -0.00165028 Jy
! Component: 1950  -  total flux cleaned = -0.00167849 Jy
! Component: 2000  -  total flux cleaned = -0.00165014 Jy
! Total flux subtracted in 2048 components = -0.00151137 Jy
! Clean residual min=-0.001378 max=0.001958 Jy/beam
! Clean residual mean=0.000008 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.529478 Jy
keep
! Adding 159 model components to the UV plane model.
! The established model now contains 253 components and 0.529478 Jy
![Exited script file: muppet]
wmap "J1209-2406_X_1997_08_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8725 x 2.263 at -6.084 degrees (North through East)
! Clean map  min=-0.0024881  max=0.32445 Jy/beam
! Writing clean map to FITS file: J1209-2406_X_1997_08_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.324451 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000516423 
device "J1209-2406_X_1997_08_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J1209-2406_X_1997_08_27_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.477505 0.477505 0.955009 1.91002 3.82004 7.64007 15.2801 30.5603 61.1206
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.324 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8725 x 2.263 at -6.084 degrees (North through East)
! Clean map  min=-0.0024881  max=0.32445 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1209-2406_X_1997_08_27_yyk\_map.gif/gif"
! Attempting to open device: 'J1209-2406_X_1997_08_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1209-2406_X_1997_08_27_yyk_uvs.log closed on Mon Jan  8 05:36:17 2007