! Started logfile: J1205-2634_X_1997_08_27_yyk_uvs.log on Mon Jan 8 05:34:19 2007 obs J1205-2634_X_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1205-2634_X_1997_08_27_yyk_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.839472 visibilities/baseline/integration-bin. ! Found source: J1205-2634 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 701 lines of history. ! ! Reading 21608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1205-2634_X_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.386643 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.694 mas, bmaj=1.712 mas, bpa=-3.111 degrees ! Estimated noise=1486.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.245119 Jy ! Component: 100 - total flux cleaned = 0.291912 Jy ! Total flux subtracted in 100 components = 0.291912 Jy ! Clean residual min=-0.011083 max=0.014890 Jy/beam ! Clean residual mean=0.000033 rms=0.003156 Jy/beam ! Combined flux in latest and established models = 0.291913 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.291913 Jy ! ! Correcting IF 1. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.252676Jy sigma=0.001343 ! Fit after self-cal, rms=0.252491Jy sigma=0.001341 ! Inverting map and beam ! Estimated beam: bmin=0.694 mas, bmaj=1.712 mas, bpa=-3.111 degrees ! Estimated noise=1486.67 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9072 mas, bmaj=2.346 mas, bpa=-7.595 degrees ! Estimated noise=843.229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243132 Jy ! Component: 100 - total flux cleaned = 0.031039 Jy ! Component: 150 - total flux cleaned = 0.033177 Jy ! Component: 200 - total flux cleaned = 0.0333551 Jy ! Total flux subtracted in 200 components = 0.0333551 Jy ! Clean residual min=-0.008226 max=0.018564 Jy/beam ! Clean residual mean=0.000007 rms=0.002939 Jy/beam ! Combined flux in latest and established models = 0.325268 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.325268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251296Jy sigma=0.001332 ! Fit after self-cal, rms=0.251273Jy sigma=0.001332 ! Inverting map ! Added new window around map position (-1.6, 4.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189683 Jy ! Component: 100 - total flux cleaned = 0.024273 Jy ! Component: 150 - total flux cleaned = 0.0244792 Jy ! Component: 200 - total flux cleaned = 0.0242165 Jy ! Total flux subtracted in 200 components = 0.0242165 Jy ! Clean residual min=-0.008216 max=0.008685 Jy/beam ! Clean residual mean=-0.000002 rms=0.002153 Jy/beam ! Combined flux in latest and established models = 0.349484 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 57 components and 0.349484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250337Jy sigma=0.001327 ! Fit after self-cal, rms=0.250256Jy sigma=0.001326 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9072 x 2.346 at -7.595 degrees (North through East) ! Clean map min=-0.0069836 max=0.28741 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0013 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.95 KP 1.10 ! LA 1.00 MK 1.02 NL 1.02 OV 0.99 ! PT 0.95 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0149 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.92 KP 1.11 ! LA 0.99 MK 0.98 NL 1.00 OV 1.07 ! PT 0.88 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.998999 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.97 KP 1.10 ! LA 0.96 MK 0.98 NL 1.03 OV 1.02 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.988663 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.03 KP 1.08 ! LA 0.96 MK 0.97 NL 1.00 OV 1.04 ! PT 0.99 SC 1.06 ! ! ! Fit before self-cal, rms=0.250256Jy sigma=0.001326 ! Fit after self-cal, rms=0.251700Jy sigma=0.001321 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251700Jy sigma=0.001321 ! Fit after self-cal, rms=0.251706Jy sigma=0.001321 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8982 mas, bmaj=2.347 mas, bpa=-7.883 degrees ! Estimated noise=840.714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256347 Jy ! Component: 100 - total flux cleaned = 0.0027718 Jy ! Component: 150 - total flux cleaned = 0.00262705 Jy ! Component: 200 - total flux cleaned = 0.00250412 Jy ! Total flux subtracted in 200 components = 0.00250412 Jy ! Clean residual min=-0.004966 max=0.006080 Jy/beam ! Clean residual mean=-0.000027 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 0.351988 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 0.351988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251624Jy sigma=0.001321 ! Fit after self-cal, rms=0.251623Jy sigma=0.001321 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251623Jy sigma=0.001321 ! Fit after self-cal, rms=0.235517Jy sigma=0.001231 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113324 Jy ! Component: 100 - total flux cleaned = 0.0149171 Jy ! Component: 150 - total flux cleaned = 0.0157976 Jy ! Component: 200 - total flux cleaned = 0.0160656 Jy ! Total flux subtracted in 200 components = 0.0160656 Jy ! Clean residual min=-0.005612 max=0.004596 Jy/beam ! Clean residual mean=-0.000044 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.368054 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.368054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235074Jy sigma=0.001228 ! Fit after self-cal, rms=0.232883Jy sigma=0.001216 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8982 x 2.347 at -7.883 degrees (North through East) ! Clean map min=-0.0056988 max=0.29933 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232883Jy sigma=0.001216 ! Fit after self-cal, rms=0.232736Jy sigma=0.001213 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232736Jy sigma=0.001213 ! Fit after self-cal, rms=0.232298Jy sigma=0.001210 ! Inverting map and beam ! Estimated beam: bmin=0.8971 mas, bmaj=2.268 mas, bpa=-6.831 degrees ! Estimated noise=832.943 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206595 Jy ! Component: 100 - total flux cleaned = 0.00189697 Jy ! Component: 150 - total flux cleaned = 0.00189655 Jy ! Component: 200 - total flux cleaned = 0.00185683 Jy ! Total flux subtracted in 200 components = 0.00185683 Jy ! Clean residual min=-0.003132 max=0.003289 Jy/beam ! Clean residual mean=-0.000016 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.369911 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 102 components and 0.369911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232265Jy sigma=0.001210 ! Fit after self-cal, rms=0.232130Jy sigma=0.001209 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232130Jy sigma=0.001209 ! Fit after self-cal, rms=0.231931Jy sigma=0.001207 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231931Jy sigma=0.001207 ! Fit after self-cal, rms=0.231886Jy sigma=0.001207 ! Inverting map and beam ! Estimated beam: bmin=0.8971 mas, bmaj=2.267 mas, bpa=-6.796 degrees ! Estimated noise=831.919 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648559 Jy ! Component: 100 - total flux cleaned = 0.000649582 Jy ! Component: 150 - total flux cleaned = 0.000615466 Jy ! Component: 200 - total flux cleaned = 0.000614706 Jy ! Total flux subtracted in 200 components = 0.000614706 Jy ! Clean residual min=-0.003072 max=0.003101 Jy/beam ! Clean residual mean=-0.000018 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.370525 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 106 components and 0.370525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231873Jy sigma=0.001207 ! Fit after self-cal, rms=0.231855Jy sigma=0.001207 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=5.979 mas, bpa=3.423 degrees ! Estimated noise=1058.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341551 Jy ! Component: 100 - total flux cleaned = 0.000341302 Jy ! Component: 150 - total flux cleaned = 0.000341734 Jy ! Component: 200 - total flux cleaned = 0.000343241 Jy ! Total flux subtracted in 200 components = 0.000343241 Jy ! Clean residual min=-0.003712 max=0.003678 Jy/beam ! Clean residual mean=-0.000035 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.370868 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 113 components and 0.370868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231850Jy sigma=0.001207 ! Fit after self-cal, rms=0.231844Jy sigma=0.001207 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6911 mas, bmaj=1.691 mas, bpa=-2.886 degrees ! Estimated noise=1472.07 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.254723 Jy ! Component: 100 - total flux cleaned = 0.301955 Jy ! Component: 150 - total flux cleaned = 0.323403 Jy ! Component: 200 - total flux cleaned = 0.337782 Jy ! Total flux subtracted in 200 components = 0.337782 Jy ! Clean residual min=-0.006280 max=0.008161 Jy/beam ! Clean residual mean=0.000009 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.337782 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.337782 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8971 mas, bmaj=2.267 mas, bpa=-6.796 degrees ! Estimated noise=831.919 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164716 Jy ! Component: 100 - total flux cleaned = 0.0247001 Jy ! Component: 150 - total flux cleaned = 0.0285535 Jy ! Component: 200 - total flux cleaned = 0.0299633 Jy ! Total flux subtracted in 200 components = 0.0299633 Jy ! Clean residual min=-0.003394 max=0.003253 Jy/beam ! Clean residual mean=-0.000017 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.367745 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 64 components and 0.367745 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=5.979 mas, bpa=3.423 degrees ! Estimated noise=1058.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249233 Jy ! Component: 100 - total flux cleaned = 0.00278324 Jy ! Component: 150 - total flux cleaned = 0.00295879 Jy ! Component: 200 - total flux cleaned = 0.00301709 Jy ! Total flux subtracted in 200 components = 0.00301709 Jy ! Clean residual min=-0.003686 max=0.003575 Jy/beam ! Clean residual mean=-0.000035 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.370762 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 82 components and 0.370762 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8971 mas, bmaj=2.267 mas, bpa=-6.796 degrees ! Estimated noise=831.919 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015704 Jy ! Component: 100 - total flux cleaned = 0.00015451 Jy ! Component: 150 - total flux cleaned = 0.00010698 Jy ! Component: 200 - total flux cleaned = 0.000109508 Jy ! Total flux subtracted in 200 components = 0.000109508 Jy ! Clean residual min=-0.003098 max=0.003153 Jy/beam ! Clean residual mean=-0.000019 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.370872 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.370872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231891Jy sigma=0.001207 ! Fit after self-cal, rms=0.231887Jy sigma=0.001207 wmodel J1205-2634_X_1997_08_27_yyk\_map.mod ! Writing 93 model components to file: J1205-2634_X_1997_08_27_yyk_map.mod wobs J1205-2634_X_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1205-2634_X_1997_08_27_yyk_uvs.fits wwins J1205-2634_X_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J1205-2634_X_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168172 Jy ! Component: 100 - total flux cleaned = 0.000580822 Jy ! Component: 150 - total flux cleaned = 0.0006305 Jy ! Component: 200 - total flux cleaned = 0.000585181 Jy ! Component: 250 - total flux cleaned = 0.00058516 Jy ! Component: 300 - total flux cleaned = 0.000544002 Jy ! Component: 350 - total flux cleaned = 0.000705497 Jy ! Component: 400 - total flux cleaned = 0.000783737 Jy ! Component: 450 - total flux cleaned = 0.000898299 Jy ! Component: 500 - total flux cleaned = 0.00100923 Jy ! Component: 550 - total flux cleaned = 0.00118939 Jy ! Component: 600 - total flux cleaned = 0.00122525 Jy ! Component: 650 - total flux cleaned = 0.0012593 Jy ! Component: 700 - total flux cleaned = 0.00112517 Jy ! Component: 750 - total flux cleaned = 0.00112608 Jy ! Component: 800 - total flux cleaned = 0.00115828 Jy ! Component: 850 - total flux cleaned = 0.00109469 Jy ! Component: 900 - total flux cleaned = 0.00106293 Jy ! Component: 950 - total flux cleaned = 0.000971235 Jy ! Component: 1000 - total flux cleaned = 0.000971247 Jy ! Component: 1050 - total flux cleaned = 0.000941045 Jy ! Component: 1100 - total flux cleaned = 0.000882959 Jy ! Component: 1150 - total flux cleaned = 0.000883371 Jy ! Component: 1200 - total flux cleaned = 0.000798844 Jy ! Component: 1250 - total flux cleaned = 0.000743865 Jy ! Component: 1300 - total flux cleaned = 0.000771503 Jy ! Component: 1350 - total flux cleaned = 0.000690574 Jy ! Component: 1400 - total flux cleaned = 0.00066426 Jy ! Component: 1450 - total flux cleaned = 0.000664297 Jy ! Component: 1500 - total flux cleaned = 0.000586622 Jy ! Component: 1550 - total flux cleaned = 0.000560557 Jy ! Component: 1600 - total flux cleaned = 0.000434645 Jy ! Component: 1650 - total flux cleaned = 0.000409781 Jy ! Component: 1700 - total flux cleaned = 0.000263229 Jy ! Component: 1750 - total flux cleaned = 0.000287012 Jy ! Component: 1800 - total flux cleaned = 0.000167336 Jy ! Component: 1850 - total flux cleaned = 4.96647e-05 Jy ! Component: 1900 - total flux cleaned = 2.62859e-05 Jy ! Component: 1950 - total flux cleaned = -2.00806e-05 Jy ! Component: 2000 - total flux cleaned = -2.02123e-05 Jy ! Total flux subtracted in 2048 components = -0.000132729 Jy ! Clean residual min=-0.001119 max=0.001398 Jy/beam ! Clean residual mean=-0.000013 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.370739 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 217 components and 0.370739 Jy ![Exited script file: muppet] wmap "J1205-2634_X_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8971 x 2.267 at -6.796 degrees (North through East) ! Clean map min=-0.0030331 max=0.29749 Jy/beam ! Writing clean map to FITS file: J1205-2634_X_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.297494 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000404965 device "J1205-2634_X_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1205-2634_X_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.408376 0.408376 0.816753 1.63351 3.26701 6.53402 13.068 26.1361 52.2722 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.297 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8971 x 2.267 at -6.796 degrees (North through East) ! Clean map min=-0.0030331 max=0.29749 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1205-2634_X_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1205-2634_X_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1205-2634_X_1997_08_27_yyk_uvs.log closed on Mon Jan 8 05:34:28 2007