! Started logfile: J1205-2634_X_1997_07_02_yyk_uvs.log on Mon Jan 8 05:34:08 2007 obs J1205-2634_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1205-2634_X_1997_07_02_yyk_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.624413 visibilities/baseline/integration-bin. ! Found source: J1205-2634 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 15960 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1205-2634_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.374604 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7016 mas, bmaj=2.053 mas, bpa=-13 degrees ! Estimated noise=1926.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.207102 Jy ! Component: 100 - total flux cleaned = 0.265287 Jy ! Total flux subtracted in 100 components = 0.265287 Jy ! Clean residual min=-0.037044 max=0.051069 Jy/beam ! Clean residual mean=-0.000396 rms=0.010681 Jy/beam ! Combined flux in latest and established models = 0.265287 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.265287 Jy ! ! Correcting IF 1. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.300707Jy sigma=0.001511 ! Fit after self-cal, rms=0.296492Jy sigma=0.001474 ! Inverting map and beam ! Estimated beam: bmin=0.7016 mas, bmaj=2.053 mas, bpa=-13 degrees ! Estimated noise=1926.1 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151148 Jy ! Component: 100 - total flux cleaned = 0.0110268 Jy ! Total flux subtracted in 100 components = 0.0110268 Jy ! Clean residual min=-0.039322 max=0.035755 Jy/beam ! Clean residual mean=-0.000439 rms=0.008275 Jy/beam ! Combined flux in latest and established models = 0.276314 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.276314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290242Jy sigma=0.001409 ! Fit after self-cal, rms=0.290219Jy sigma=0.001409 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8448 mas, bmaj=2.323 mas, bpa=-12.74 degrees ! Estimated noise=1023.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00840179 Jy ! Component: 100 - total flux cleaned = 0.00712209 Jy ! Component: 150 - total flux cleaned = 0.00851661 Jy ! Component: 200 - total flux cleaned = 0.00969566 Jy ! Total flux subtracted in 200 components = 0.00969566 Jy ! Clean residual min=-0.032016 max=0.028335 Jy/beam ! Clean residual mean=-0.000922 rms=0.007520 Jy/beam ! Combined flux in latest and established models = 0.28601 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.28601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289963Jy sigma=0.001398 ! Fit after self-cal, rms=0.289951Jy sigma=0.001398 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8448 x 2.323 at -12.74 degrees (North through East) ! Clean map min=-0.030309 max=0.26114 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.852241 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.12 HN 0.94 KP 0.97 ! LA 0.94 MK 0.92 NL 0.88 OV 0.85 ! PT 3.05 SC 1.08 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.92141 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.13 HN 0.88 KP 0.95 ! LA 0.94 MK 0.93 NL 0.89 OV 0.90 ! PT 2.10 SC 1.13 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.904229 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.18 HN 0.95 KP 0.99 ! LA 0.93 MK 0.91 NL 0.91 OV 0.85 ! PT 2.24 SC 1.14 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.890273 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.12 HN 0.96 KP 0.96 ! LA 0.93 MK 0.86 NL 0.92 OV 0.87 ! PT 2.55 SC 1.10 ! ! ! Fit before self-cal, rms=0.289951Jy sigma=0.001398 ! Fit after self-cal, rms=0.311018Jy sigma=0.001423 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311018Jy sigma=0.001423 ! Fit after self-cal, rms=0.311107Jy sigma=0.001423 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8205 mas, bmaj=2.371 mas, bpa=-16.01 degrees ! Estimated noise=777.601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0479879 Jy ! Component: 100 - total flux cleaned = -0.0555701 Jy ! Component: 150 - total flux cleaned = -0.0552875 Jy ! Component: 200 - total flux cleaned = -0.055057 Jy ! Total flux subtracted in 200 components = -0.055057 Jy ! Clean residual min=-0.014630 max=0.015734 Jy/beam ! Clean residual mean=-0.000026 rms=0.003888 Jy/beam ! Combined flux in latest and established models = 0.230953 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.230953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302546Jy sigma=0.001365 ! Fit after self-cal, rms=0.302542Jy sigma=0.001365 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302542Jy sigma=0.001365 ! Fit after self-cal, rms=0.291458Jy sigma=0.001302 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533896 Jy ! Component: 100 - total flux cleaned = 0.0062132 Jy ! Component: 150 - total flux cleaned = 0.00695289 Jy ! Component: 200 - total flux cleaned = 0.00726488 Jy ! Total flux subtracted in 200 components = 0.00726488 Jy ! Clean residual min=-0.013280 max=0.015116 Jy/beam ! Clean residual mean=0.000011 rms=0.003684 Jy/beam ! Combined flux in latest and established models = 0.238218 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.238218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291405Jy sigma=0.001299 ! Fit after self-cal, rms=0.288956Jy sigma=0.001291 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8205 x 2.371 at -16.01 degrees (North through East) ! Clean map min=-0.012652 max=0.20536 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288956Jy sigma=0.001291 ! Fit after self-cal, rms=0.442884Jy sigma=0.001245 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.442884Jy sigma=0.001245 ! Fit after self-cal, rms=0.442530Jy sigma=0.001242 ! Inverting map and beam ! Estimated beam: bmin=0.8116 mas, bmaj=2.395 mas, bpa=-16.51 degrees ! Estimated noise=751.56 mJy/beam. ! Added new window around map position (-2.2, 8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116963 Jy ! Component: 100 - total flux cleaned = 0.0140923 Jy ! Component: 150 - total flux cleaned = 0.0140931 Jy ! Component: 200 - total flux cleaned = 0.0140933 Jy ! Total flux subtracted in 200 components = 0.0140933 Jy ! Clean residual min=-0.004063 max=0.004199 Jy/beam ! Clean residual mean=-0.000009 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.252311 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.252311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.442391Jy sigma=0.001237 ! Fit after self-cal, rms=0.441764Jy sigma=0.001235 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441764Jy sigma=0.001235 ! Fit after self-cal, rms=0.466903Jy sigma=0.001231 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466903Jy sigma=0.001231 ! Fit after self-cal, rms=0.466267Jy sigma=0.001230 ! Inverting map and beam ! Estimated beam: bmin=0.8035 mas, bmaj=2.384 mas, bpa=-16.73 degrees ! Estimated noise=748.421 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305761 Jy ! Component: 100 - total flux cleaned = 0.00350443 Jy ! Component: 150 - total flux cleaned = 0.00350477 Jy ! Component: 200 - total flux cleaned = 0.00358757 Jy ! Total flux subtracted in 200 components = 0.00358757 Jy ! Clean residual min=-0.003746 max=0.004293 Jy/beam ! Clean residual mean=0.000009 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.255899 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.255899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466211Jy sigma=0.001229 ! Fit after self-cal, rms=0.465761Jy sigma=0.001228 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.965 mas, bmaj=4.81 mas, bpa=-10.14 degrees ! Estimated noise=1010.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000821079 Jy ! Component: 100 - total flux cleaned = 0.000820123 Jy ! Component: 150 - total flux cleaned = 0.00101604 Jy ! Component: 200 - total flux cleaned = 0.00111749 Jy ! Total flux subtracted in 200 components = 0.00111749 Jy ! Clean residual min=-0.004161 max=0.004414 Jy/beam ! Clean residual mean=0.000030 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.257016 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.257016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465735Jy sigma=0.001228 ! Fit after self-cal, rms=0.465467Jy sigma=0.001228 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6724 mas, bmaj=2.03 mas, bpa=-14.67 degrees ! Estimated noise=1500.58 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.18643 Jy ! Component: 100 - total flux cleaned = 0.222912 Jy ! Component: 150 - total flux cleaned = 0.234894 Jy ! Component: 200 - total flux cleaned = 0.239817 Jy ! Total flux subtracted in 200 components = 0.239817 Jy ! Clean residual min=-0.006752 max=0.006766 Jy/beam ! Clean residual mean=0.000058 rms=0.002001 Jy/beam ! Combined flux in latest and established models = 0.239817 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.239817 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8035 mas, bmaj=2.384 mas, bpa=-16.73 degrees ! Estimated noise=748.421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 3.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830887 Jy ! Component: 100 - total flux cleaned = 0.012474 Jy ! Component: 150 - total flux cleaned = 0.0144068 Jy ! Component: 200 - total flux cleaned = 0.0153998 Jy ! Total flux subtracted in 200 components = 0.0153998 Jy ! Clean residual min=-0.003217 max=0.004156 Jy/beam ! Clean residual mean=0.000014 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.255217 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 50 components and 0.255217 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.965 mas, bmaj=4.81 mas, bpa=-10.14 degrees ! Estimated noise=1010.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000948686 Jy ! Component: 100 - total flux cleaned = 0.00130697 Jy ! Component: 150 - total flux cleaned = 0.00136739 Jy ! Component: 200 - total flux cleaned = 0.00131747 Jy ! Total flux subtracted in 200 components = 0.00131747 Jy ! Clean residual min=-0.003956 max=0.004733 Jy/beam ! Clean residual mean=0.000035 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.256534 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 74 components and 0.256534 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8035 mas, bmaj=2.384 mas, bpa=-16.73 degrees ! Estimated noise=748.421 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208794 Jy ! Component: 100 - total flux cleaned = -0.000133079 Jy ! Component: 150 - total flux cleaned = 0.00014777 Jy ! Component: 200 - total flux cleaned = 0.000212395 Jy ! Total flux subtracted in 200 components = 0.000212395 Jy ! Clean residual min=-0.003001 max=0.003999 Jy/beam ! Clean residual mean=0.000013 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.256746 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.256746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465432Jy sigma=0.001227 ! Fit after self-cal, rms=0.465263Jy sigma=0.001227 wmodel J1205-2634_X_1997_07_02_yyk\_map.mod ! Writing 88 model components to file: J1205-2634_X_1997_07_02_yyk_map.mod wobs J1205-2634_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1205-2634_X_1997_07_02_yyk_uvs.fits wwins J1205-2634_X_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J1205-2634_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164066 Jy ! Component: 100 - total flux cleaned = 0.00237568 Jy ! Component: 150 - total flux cleaned = 0.00248007 Jy ! Component: 200 - total flux cleaned = 0.00237921 Jy ! Component: 250 - total flux cleaned = 0.0022848 Jy ! Component: 300 - total flux cleaned = 0.00223963 Jy ! Component: 350 - total flux cleaned = 0.00198023 Jy ! Component: 400 - total flux cleaned = 0.001855 Jy ! Component: 450 - total flux cleaned = 0.0016926 Jy ! Component: 500 - total flux cleaned = 0.00161485 Jy ! Component: 550 - total flux cleaned = 0.00150125 Jy ! Component: 600 - total flux cleaned = 0.00135374 Jy ! Component: 650 - total flux cleaned = 0.00128165 Jy ! Component: 700 - total flux cleaned = 0.00100072 Jy ! Component: 750 - total flux cleaned = 0.00086363 Jy ! Component: 800 - total flux cleaned = 0.00069485 Jy ! Component: 850 - total flux cleaned = 0.000431908 Jy ! Component: 900 - total flux cleaned = 0.000207418 Jy ! Component: 950 - total flux cleaned = 5.0135e-05 Jy ! Component: 1000 - total flux cleaned = -0.000104489 Jy ! Component: 1050 - total flux cleaned = -0.000195435 Jy ! Component: 1100 - total flux cleaned = -0.000314824 Jy ! Component: 1150 - total flux cleaned = -0.000431762 Jy ! Component: 1200 - total flux cleaned = -0.000546365 Jy ! Component: 1250 - total flux cleaned = -0.000602899 Jy ! Component: 1300 - total flux cleaned = -0.000686117 Jy ! Component: 1350 - total flux cleaned = -0.000713208 Jy ! Component: 1400 - total flux cleaned = -0.000713272 Jy ! Component: 1450 - total flux cleaned = -0.000871925 Jy ! Component: 1500 - total flux cleaned = -0.00084554 Jy ! Component: 1550 - total flux cleaned = -0.000845481 Jy ! Component: 1600 - total flux cleaned = -0.000845518 Jy ! Component: 1650 - total flux cleaned = -0.000895626 Jy ! Component: 1700 - total flux cleaned = -0.000920494 Jy ! Component: 1750 - total flux cleaned = -0.000969254 Jy ! Component: 1800 - total flux cleaned = -0.0010176 Jy ! Component: 1850 - total flux cleaned = -0.00104156 Jy ! Component: 1900 - total flux cleaned = -0.00111175 Jy ! Component: 1950 - total flux cleaned = -0.001158 Jy ! Component: 2000 - total flux cleaned = -0.00120358 Jy ! Total flux subtracted in 2048 components = -0.0012261 Jy ! Clean residual min=-0.001115 max=0.001271 Jy/beam ! Clean residual mean=0.000011 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.25552 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 223 components and 0.25552 Jy ![Exited script file: muppet] wmap "J1205-2634_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8035 x 2.384 at -16.73 degrees (North through East) ! Clean map min=-0.0023442 max=0.21132 Jy/beam ! Writing clean map to FITS file: J1205-2634_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.211321 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000413602 device "J1205-2634_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1205-2634_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.587167 0.587167 1.17433 2.34867 4.69734 9.39467 18.7893 37.5787 75.1574 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.211 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8035 x 2.384 at -16.73 degrees (North through East) ! Clean map min=-0.0023442 max=0.21132 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1205-2634_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1205-2634_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1205-2634_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 05:34:17 2007