! Started logfile: J1159-2228_X_1997_07_02_yyk_uvs.log on Mon Jan 8 05:31:00 2007 obs J1159-2228_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1159-2228_X_1997_07_02_yyk_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.626815 visibilities/baseline/integration-bin. ! Found source: J1159-2228 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 16924 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1159-2228_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.307866 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6997 mas, bmaj=2.023 mas, bpa=-10.56 degrees ! Estimated noise=1897.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.16765 Jy ! Component: 100 - total flux cleaned = 0.226139 Jy ! Total flux subtracted in 100 components = 0.226139 Jy ! Clean residual min=-0.015226 max=0.020226 Jy/beam ! Clean residual mean=0.000122 rms=0.004863 Jy/beam ! Combined flux in latest and established models = 0.226139 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.226139 Jy ! ! Correcting IF 1. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.232456Jy sigma=0.001303 ! Fit after self-cal, rms=0.231684Jy sigma=0.001299 ! Inverting map and beam ! Estimated beam: bmin=0.6997 mas, bmaj=2.023 mas, bpa=-10.56 degrees ! Estimated noise=1897.58 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8825 mas, bmaj=2.34 mas, bpa=-10.54 degrees ! Estimated noise=928.827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339747 Jy ! Component: 100 - total flux cleaned = 0.0480941 Jy ! Component: 150 - total flux cleaned = 0.0534309 Jy ! Component: 200 - total flux cleaned = 0.054386 Jy ! Total flux subtracted in 200 components = 0.054386 Jy ! Clean residual min=-0.012754 max=0.011507 Jy/beam ! Clean residual mean=0.000092 rms=0.003065 Jy/beam ! Combined flux in latest and established models = 0.280525 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.280525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229565Jy sigma=0.001279 ! Fit after self-cal, rms=0.229512Jy sigma=0.001279 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8825 x 2.34 at -10.54 degrees (North through East) ! Clean map min=-0.012235 max=0.16929 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.986361 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.13 HN 0.93 KP 0.98 ! LA 1.00 MK 1.02 NL 0.96 OV 0.87 ! PT 1.11 SC 1.08 ! ! ! Fit before self-cal, rms=0.229512Jy sigma=0.001279 ! Fit after self-cal, rms=0.229658Jy sigma=0.001277 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229658Jy sigma=0.001277 ! Fit after self-cal, rms=0.229658Jy sigma=0.001277 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8831 mas, bmaj=2.355 mas, bpa=-10.87 degrees ! Estimated noise=923.932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426706 Jy ! Component: 100 - total flux cleaned = 0.000579726 Jy ! Component: 150 - total flux cleaned = 0.000843229 Jy ! Component: 200 - total flux cleaned = 0.000837037 Jy ! Total flux subtracted in 200 components = 0.000837037 Jy ! Clean residual min=-0.011199 max=0.010722 Jy/beam ! Clean residual mean=0.000088 rms=0.002741 Jy/beam ! Combined flux in latest and established models = 0.281362 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.281362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229551Jy sigma=0.001277 ! Fit after self-cal, rms=0.229546Jy sigma=0.001277 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229546Jy sigma=0.001277 ! Fit after self-cal, rms=0.221782Jy sigma=0.001235 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00821795 Jy ! Component: 100 - total flux cleaned = 0.00948256 Jy ! Component: 150 - total flux cleaned = 0.00948 Jy ! Component: 200 - total flux cleaned = 0.00947908 Jy ! Total flux subtracted in 200 components = 0.00947908 Jy ! Clean residual min=-0.009063 max=0.009484 Jy/beam ! Clean residual mean=0.000086 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 0.290841 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.290841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221679Jy sigma=0.001233 ! Fit after self-cal, rms=0.220710Jy sigma=0.001228 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8831 x 2.355 at -10.87 degrees (North through East) ! Clean map min=-0.0084427 max=0.17569 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220710Jy sigma=0.001228 ! Fit after self-cal, rms=0.219165Jy sigma=0.001227 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219165Jy sigma=0.001227 ! Fit after self-cal, rms=0.218926Jy sigma=0.001225 ! Inverting map and beam ! Estimated beam: bmin=0.8757 mas, bmaj=2.368 mas, bpa=-11.71 degrees ! Estimated noise=908.864 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169321 Jy ! Component: 100 - total flux cleaned = -0.00206248 Jy ! Component: 150 - total flux cleaned = -0.00214071 Jy ! Component: 200 - total flux cleaned = -0.00222379 Jy ! Total flux subtracted in 200 components = -0.00222379 Jy ! Clean residual min=-0.008064 max=0.008139 Jy/beam ! Clean residual mean=0.000076 rms=0.002237 Jy/beam ! Combined flux in latest and established models = 0.288618 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.288618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218854Jy sigma=0.001225 ! Fit after self-cal, rms=0.218760Jy sigma=0.001225 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218760Jy sigma=0.001225 ! Fit after self-cal, rms=0.216378Jy sigma=0.001221 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216378Jy sigma=0.001221 ! Fit after self-cal, rms=0.216334Jy sigma=0.001221 ! Inverting map and beam ! Estimated beam: bmin=0.8667 mas, bmaj=2.383 mas, bpa=-12.43 degrees ! Estimated noise=884.736 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00450475 Jy ! Component: 100 - total flux cleaned = -0.00522553 Jy ! Component: 150 - total flux cleaned = -0.00559016 Jy ! Component: 200 - total flux cleaned = -0.00584193 Jy ! Total flux subtracted in 200 components = -0.00584193 Jy ! Clean residual min=-0.007110 max=0.007050 Jy/beam ! Clean residual mean=0.000066 rms=0.001902 Jy/beam ! Combined flux in latest and established models = 0.282776 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.282776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216223Jy sigma=0.001221 ! Fit after self-cal, rms=0.216197Jy sigma=0.001221 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.002 mas, bmaj=4.385 mas, bpa=-10.46 degrees ! Estimated noise=1156.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166564 Jy ! Component: 100 - total flux cleaned = -0.00185836 Jy ! Component: 150 - total flux cleaned = -0.00197317 Jy ! Component: 200 - total flux cleaned = -0.00208389 Jy ! Total flux subtracted in 200 components = -0.00208389 Jy ! Clean residual min=-0.009568 max=0.009770 Jy/beam ! Clean residual mean=0.000153 rms=0.002961 Jy/beam ! Combined flux in latest and established models = 0.280692 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 36 components and 0.280692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216164Jy sigma=0.001221 ! Fit after self-cal, rms=0.216146Jy sigma=0.001221 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6952 mas, bmaj=2.05 mas, bpa=-11.32 degrees ! Estimated noise=1827.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.170408 Jy ! Component: 100 - total flux cleaned = 0.231428 Jy ! Component: 150 - total flux cleaned = 0.260148 Jy ! Component: 200 - total flux cleaned = 0.274854 Jy ! Total flux subtracted in 200 components = 0.274854 Jy ! Clean residual min=-0.011054 max=0.011949 Jy/beam ! Clean residual mean=0.000040 rms=0.002943 Jy/beam ! Combined flux in latest and established models = 0.274854 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.274854 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8667 mas, bmaj=2.383 mas, bpa=-12.43 degrees ! Estimated noise=884.736 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500131 Jy ! Component: 100 - total flux cleaned = 0.00610521 Jy ! Component: 150 - total flux cleaned = 0.0064628 Jy ! Component: 200 - total flux cleaned = 0.00674742 Jy ! Total flux subtracted in 200 components = 0.00674742 Jy ! Clean residual min=-0.007485 max=0.007590 Jy/beam ! Clean residual mean=0.000068 rms=0.001977 Jy/beam ! Combined flux in latest and established models = 0.281602 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.281602 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.002 mas, bmaj=4.385 mas, bpa=-10.46 degrees ! Estimated noise=1156.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108369 Jy ! Component: 100 - total flux cleaned = -0.00116039 Jy ! Component: 150 - total flux cleaned = -0.00128855 Jy ! Component: 200 - total flux cleaned = -0.0013499 Jy ! Total flux subtracted in 200 components = -0.0013499 Jy ! Clean residual min=-0.009588 max=0.009724 Jy/beam ! Clean residual mean=0.000154 rms=0.002977 Jy/beam ! Combined flux in latest and established models = 0.280252 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.280252 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8667 mas, bmaj=2.383 mas, bpa=-12.43 degrees ! Estimated noise=884.736 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168228 Jy ! Component: 100 - total flux cleaned = 0.000537441 Jy ! Component: 150 - total flux cleaned = 0.000852164 Jy ! Component: 200 - total flux cleaned = 0.00104302 Jy ! Total flux subtracted in 200 components = 0.00104302 Jy ! Clean residual min=-0.007188 max=0.007121 Jy/beam ! Clean residual mean=0.000069 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 0.281295 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.281295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216191Jy sigma=0.001221 ! Fit after self-cal, rms=0.216167Jy sigma=0.001221 wmodel J1159-2228_X_1997_07_02_yyk\_map.mod ! Writing 35 model components to file: J1159-2228_X_1997_07_02_yyk_map.mod wobs J1159-2228_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1159-2228_X_1997_07_02_yyk_uvs.fits wwins J1159-2228_X_1997_07_02_yyk\_map.win ! wwins: Wrote 1 windows to J1159-2228_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118116 Jy ! Component: 100 - total flux cleaned = 0.00177411 Jy ! Component: 150 - total flux cleaned = 0.00177388 Jy ! Component: 200 - total flux cleaned = 0.00156283 Jy ! Component: 250 - total flux cleaned = 0.0012586 Jy ! Component: 300 - total flux cleaned = 0.000967486 Jy ! Component: 350 - total flux cleaned = 0.00068787 Jy ! Component: 400 - total flux cleaned = 0.000688865 Jy ! Component: 450 - total flux cleaned = 0.00068935 Jy ! Component: 500 - total flux cleaned = 0.000856848 Jy ! Component: 550 - total flux cleaned = 0.00109744 Jy ! Component: 600 - total flux cleaned = 0.00117738 Jy ! Component: 650 - total flux cleaned = 0.00133017 Jy ! Component: 700 - total flux cleaned = 0.00147764 Jy ! Component: 750 - total flux cleaned = 0.00162077 Jy ! Component: 800 - total flux cleaned = 0.00175894 Jy ! Component: 850 - total flux cleaned = 0.00169089 Jy ! Component: 900 - total flux cleaned = 0.00175761 Jy ! Component: 950 - total flux cleaned = 0.0016952 Jy ! Component: 1000 - total flux cleaned = 0.00188606 Jy ! Component: 1050 - total flux cleaned = 0.00188564 Jy ! Component: 1100 - total flux cleaned = 0.00188594 Jy ! Component: 1150 - total flux cleaned = 0.00188559 Jy ! Component: 1200 - total flux cleaned = 0.00188466 Jy ! Component: 1250 - total flux cleaned = 0.00165489 Jy ! Component: 1300 - total flux cleaned = 0.00159854 Jy ! Component: 1350 - total flux cleaned = 0.00159999 Jy ! Component: 1400 - total flux cleaned = 0.00160069 Jy ! Component: 1450 - total flux cleaned = 0.00149528 Jy ! Component: 1500 - total flux cleaned = 0.0017047 Jy ! Component: 1550 - total flux cleaned = 0.00175641 Jy ! Component: 1600 - total flux cleaned = 0.00175718 Jy ! Component: 1650 - total flux cleaned = 0.00180744 Jy ! Component: 1700 - total flux cleaned = 0.001808 Jy ! Component: 1750 - total flux cleaned = 0.00180852 Jy ! Component: 1800 - total flux cleaned = 0.00180931 Jy ! Component: 1850 - total flux cleaned = 0.00180983 Jy ! Component: 1900 - total flux cleaned = 0.00180881 Jy ! Component: 1950 - total flux cleaned = 0.00171799 Jy ! Component: 2000 - total flux cleaned = 0.00167329 Jy ! Total flux subtracted in 2048 components = 0.00167282 Jy ! Clean residual min=-0.002901 max=0.002776 Jy/beam ! Clean residual mean=0.000015 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.282968 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 186 components and 0.282968 Jy ![Exited script file: muppet] wmap "J1159-2228_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8667 x 2.383 at -12.43 degrees (North through East) ! Clean map min=-0.0055656 max=0.16918 Jy/beam ! Writing clean map to FITS file: J1159-2228_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.169176 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000912306 device "J1159-2228_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1159-2228_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.61779 1.61779 3.23559 6.47118 12.9424 25.8847 51.7694 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.169 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8667 x 2.383 at -12.43 degrees (North through East) ! Clean map min=-0.0055656 max=0.16918 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1159-2228_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1159-2228_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1159-2228_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 05:31:09 2007