! Started logfile: J1122-2532_S_1997_07_02_yyk_uvs.log on Sun Jan 7 17:44:52 2007 obs J1122-2532_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1122-2532_S_1997_07_02_yyk_uva.fits ! AN table 1: 151 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622517 visibilities/baseline/integration-bin. ! Found source: J1122-2532 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 16920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1122-2532_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.486422 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=8.081 mas, bpa=-8.949 degrees ! Estimated noise=2298.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.256114 Jy ! Component: 100 - total flux cleaned = 0.305064 Jy ! Total flux subtracted in 100 components = 0.305064 Jy ! Clean residual min=-0.023549 max=0.038578 Jy/beam ! Clean residual mean=-0.000022 rms=0.007972 Jy/beam ! Combined flux in latest and established models = 0.305064 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.305064 Jy ! ! Correcting IF 1. ! A total of 471 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.379896Jy sigma=0.001208 ! Fit after self-cal, rms=0.377925Jy sigma=0.001203 ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=8.081 mas, bpa=-8.949 degrees ! Estimated noise=2298.68 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=9.284 mas, bpa=-9.506 degrees ! Estimated noise=1612.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.042791 Jy ! Component: 100 - total flux cleaned = 0.0463912 Jy ! Component: 150 - total flux cleaned = 0.0455383 Jy ! Component: 200 - total flux cleaned = 0.0448492 Jy ! Total flux subtracted in 200 components = 0.0448491 Jy ! Clean residual min=-0.015616 max=0.018857 Jy/beam ! Clean residual mean=-0.000292 rms=0.004188 Jy/beam ! Combined flux in latest and established models = 0.349913 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.349913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373588Jy sigma=0.001189 ! Fit after self-cal, rms=0.373077Jy sigma=0.001187 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.403 x 9.284 at -9.506 degrees (North through East) ! Clean map min=-0.013695 max=0.28507 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03602 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 HN 0.90 KP 0.89 ! LA 0.99 MK 0.96 NL 1.00* OV 1.09 ! PT 0.94 SC 0.81 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.982097 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.20 HN 0.97 KP 0.93 ! LA 1.10 MK 1.05 NL 0.99 OV 1.04 ! PT 0.99 SC 0.86 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03639 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.10 HN 0.87 KP 0.89 ! LA 0.85 MK 0.92 NL 0.96 OV 0.98 ! PT 1.13 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00267 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.13 HN 1.09 KP 0.93 ! LA 0.88 MK 1.12 NL 1.06 OV 0.88 ! PT 0.88 SC 1.05 ! ! ! Fit before self-cal, rms=0.373077Jy sigma=0.001187 ! Fit after self-cal, rms=0.359830Jy sigma=0.001179 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359830Jy sigma=0.001179 ! Fit after self-cal, rms=0.359826Jy sigma=0.001179 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=9.095 mas, bpa=-7.851 degrees ! Estimated noise=1609.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128979 Jy ! Component: 100 - total flux cleaned = 0.0137184 Jy ! Component: 150 - total flux cleaned = 0.0137214 Jy ! Component: 200 - total flux cleaned = 0.0132533 Jy ! Total flux subtracted in 200 components = 0.0132533 Jy ! Clean residual min=-0.006695 max=0.007570 Jy/beam ! Clean residual mean=-0.000134 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.363166 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 60 components and 0.363166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359367Jy sigma=0.001178 ! Fit after self-cal, rms=0.359311Jy sigma=0.001177 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359311Jy sigma=0.001177 ! Fit after self-cal, rms=0.357565Jy sigma=0.001172 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305482 Jy ! Component: 100 - total flux cleaned = 0.00352086 Jy ! Component: 150 - total flux cleaned = 0.00378061 Jy ! Component: 200 - total flux cleaned = 0.00366085 Jy ! Total flux subtracted in 200 components = 0.00366085 Jy ! Clean residual min=-0.006526 max=0.006809 Jy/beam ! Clean residual mean=-0.000120 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.366827 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 76 components and 0.366827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357451Jy sigma=0.001171 ! Fit after self-cal, rms=0.357216Jy sigma=0.001171 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.353 x 9.095 at -7.851 degrees (North through East) ! Clean map min=-0.0061829 max=0.28866 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357216Jy sigma=0.001171 ! Fit after self-cal, rms=0.357442Jy sigma=0.001169 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357442Jy sigma=0.001169 ! Fit after self-cal, rms=0.357397Jy sigma=0.001169 ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=9.094 mas, bpa=-7.482 degrees ! Estimated noise=1592.15 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225771 Jy ! Component: 100 - total flux cleaned = 0.00255955 Jy ! Component: 150 - total flux cleaned = 0.00234983 Jy ! Component: 200 - total flux cleaned = 0.0020791 Jy ! Total flux subtracted in 200 components = 0.0020791 Jy ! Clean residual min=-0.005230 max=0.005558 Jy/beam ! Clean residual mean=-0.000130 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.368906 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.368906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357314Jy sigma=0.001168 ! Fit after self-cal, rms=0.357286Jy sigma=0.001168 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357286Jy sigma=0.001168 ! Fit after self-cal, rms=0.359041Jy sigma=0.001167 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359041Jy sigma=0.001167 ! Fit after self-cal, rms=0.359037Jy sigma=0.001167 ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=9.092 mas, bpa=-7.43 degrees ! Estimated noise=1590.55 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140594 Jy ! Component: 100 - total flux cleaned = 0.00167033 Jy ! Component: 150 - total flux cleaned = 0.00167117 Jy ! Component: 200 - total flux cleaned = 0.00166917 Jy ! Total flux subtracted in 200 components = 0.00166917 Jy ! Clean residual min=-0.005273 max=0.005559 Jy/beam ! Clean residual mean=-0.000129 rms=0.001457 Jy/beam ! Combined flux in latest and established models = 0.370575 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.370575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358999Jy sigma=0.001167 ! Fit after self-cal, rms=0.358990Jy sigma=0.001167 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.201 mas, bmaj=16.47 mas, bpa=-6.596 degrees ! Estimated noise=2020.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513458 Jy ! Component: 100 - total flux cleaned = 0.000739601 Jy ! Component: 150 - total flux cleaned = 0.000741025 Jy ! Component: 200 - total flux cleaned = 0.000770671 Jy ! Total flux subtracted in 200 components = 0.000770671 Jy ! Clean residual min=-0.006158 max=0.004771 Jy/beam ! Clean residual mean=-0.000277 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.371346 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 115 components and 0.371346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358980Jy sigma=0.001167 ! Fit after self-cal, rms=0.358968Jy sigma=0.001166 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=8.009 mas, bpa=-8.056 degrees ! Estimated noise=2251.86 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.25925 Jy ! Component: 100 - total flux cleaned = 0.326056 Jy ! Component: 150 - total flux cleaned = 0.352363 Jy ! Component: 200 - total flux cleaned = 0.362744 Jy ! Total flux subtracted in 200 components = 0.362744 Jy ! Clean residual min=-0.009094 max=0.008200 Jy/beam ! Clean residual mean=-0.000085 rms=0.002358 Jy/beam ! Combined flux in latest and established models = 0.362744 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.362744 Jy ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=9.092 mas, bpa=-7.43 degrees ! Estimated noise=1590.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00930204 Jy ! Component: 100 - total flux cleaned = 0.0102454 Jy ! Component: 150 - total flux cleaned = 0.0102647 Jy ! Component: 200 - total flux cleaned = 0.0102652 Jy ! Total flux subtracted in 200 components = 0.0102652 Jy ! Clean residual min=-0.006574 max=0.005274 Jy/beam ! Clean residual mean=-0.000153 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.37301 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 41 components and 0.37301 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.201 mas, bmaj=16.47 mas, bpa=-6.596 degrees ! Estimated noise=2020.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.61969e-05 Jy ! Component: 100 - total flux cleaned = 5.82263e-05 Jy ! Component: 150 - total flux cleaned = 6.53796e-05 Jy ! Component: 200 - total flux cleaned = 6.91727e-05 Jy ! Total flux subtracted in 200 components = 6.91727e-05 Jy ! Clean residual min=-0.007010 max=0.004524 Jy/beam ! Clean residual mean=-0.000305 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 0.373079 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 70 components and 0.373079 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=9.092 mas, bpa=-7.43 degrees ! Estimated noise=1590.55 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.90978e-05 Jy ! Component: 100 - total flux cleaned = -3.57374e-05 Jy ! Component: 150 - total flux cleaned = -0.000135973 Jy ! Component: 200 - total flux cleaned = -0.000226331 Jy ! Total flux subtracted in 200 components = -0.000226331 Jy ! Clean residual min=-0.006247 max=0.005179 Jy/beam ! Clean residual mean=-0.000150 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.372852 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.372852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359011Jy sigma=0.001167 ! Fit after self-cal, rms=0.358995Jy sigma=0.001167 wmodel J1122-2532_S_1997_07_02_yyk\_map.mod ! Writing 80 model components to file: J1122-2532_S_1997_07_02_yyk_map.mod wobs J1122-2532_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1122-2532_S_1997_07_02_yyk_uvs.fits wwins J1122-2532_S_1997_07_02_yyk\_map.win ! wwins: Wrote 2 windows to J1122-2532_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141861 Jy ! Component: 100 - total flux cleaned = -0.00142495 Jy ! Component: 150 - total flux cleaned = -0.00166664 Jy ! Component: 200 - total flux cleaned = -0.00189496 Jy ! Component: 250 - total flux cleaned = -0.00211122 Jy ! Component: 300 - total flux cleaned = -0.00231758 Jy ! Component: 350 - total flux cleaned = -0.0022483 Jy ! Component: 400 - total flux cleaned = -0.00224997 Jy ! Component: 450 - total flux cleaned = -0.00237879 Jy ! Component: 500 - total flux cleaned = -0.00262357 Jy ! Component: 550 - total flux cleaned = -0.00262205 Jy ! Component: 600 - total flux cleaned = -0.00267951 Jy ! Component: 650 - total flux cleaned = -0.00273708 Jy ! Component: 700 - total flux cleaned = -0.00290262 Jy ! Component: 750 - total flux cleaned = -0.00300945 Jy ! Component: 800 - total flux cleaned = -0.00321704 Jy ! Component: 850 - total flux cleaned = -0.0034704 Jy ! Component: 900 - total flux cleaned = -0.00371692 Jy ! Component: 950 - total flux cleaned = -0.00400622 Jy ! Component: 1000 - total flux cleaned = -0.00424208 Jy ! Component: 1050 - total flux cleaned = -0.00447407 Jy ! Component: 1100 - total flux cleaned = -0.00465659 Jy ! Component: 1150 - total flux cleaned = -0.004969 Jy ! Component: 1200 - total flux cleaned = -0.0050999 Jy ! Component: 1250 - total flux cleaned = -0.00527193 Jy ! Component: 1300 - total flux cleaned = -0.00548284 Jy ! Component: 1350 - total flux cleaned = -0.00569023 Jy ! Component: 1400 - total flux cleaned = -0.00593508 Jy ! Component: 1450 - total flux cleaned = -0.00609528 Jy ! Component: 1500 - total flux cleaned = -0.00637087 Jy ! Component: 1550 - total flux cleaned = -0.00656518 Jy ! Component: 1600 - total flux cleaned = -0.00683335 Jy ! Component: 1650 - total flux cleaned = -0.00709709 Jy ! Component: 1700 - total flux cleaned = -0.00743172 Jy ! Component: 1750 - total flux cleaned = -0.00772474 Jy ! Component: 1800 - total flux cleaned = -0.0080143 Jy ! Component: 1850 - total flux cleaned = -0.00830014 Jy ! Component: 1900 - total flux cleaned = -0.00865215 Jy ! Component: 1950 - total flux cleaned = -0.00896456 Jy ! Component: 2000 - total flux cleaned = -0.00920408 Jy ! Total flux subtracted in 2048 components = -0.00940719 Jy ! Clean residual min=-0.002717 max=0.001891 Jy/beam ! Clean residual mean=-0.000066 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.363445 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 214 components and 0.363445 Jy ![Exited script file: muppet] wmap "J1122-2532_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.337 x 9.092 at -7.43 degrees (North through East) ! Clean map min=-0.0042123 max=0.28796 Jy/beam ! Writing clean map to FITS file: J1122-2532_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.287961 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000697957 device "J1122-2532_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1122-2532_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.727137 0.727137 1.45427 2.90855 5.81709 11.6342 23.2684 46.5368 93.0735 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.287 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.337 x 9.092 at -7.43 degrees (North through East) ! Clean map min=-0.0042123 max=0.28796 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1122-2532_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1122-2532_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1122-2532_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 17:44:58 2007