! Started logfile: J1120-2719_S_1997_08_27_yyk_uvs.log on Sun Jan 7 17:44:22 2007 obs J1120-2719_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1120-2719_S_1997_08_27_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.868027 visibilities/baseline/integration-bin. ! Found source: J1120-2719 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 22968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1120-2719_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.735973 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=5.977 mas, bpa=-22.11 degrees ! Estimated noise=2732.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.448226 Jy ! Component: 100 - total flux cleaned = 0.483843 Jy ! Total flux subtracted in 100 components = 0.483843 Jy ! Clean residual min=-0.062813 max=0.090139 Jy/beam ! Clean residual mean=-0.001647 rms=0.015568 Jy/beam ! Combined flux in latest and established models = 0.483843 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.483843 Jy ! ! Correcting IF 1. ! A total of 259 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.507245Jy sigma=0.001414 ! Fit after self-cal, rms=0.506212Jy sigma=0.001411 ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=5.977 mas, bpa=-22.11 degrees ! Estimated noise=2732.34 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=7.437 mas, bpa=-17.93 degrees ! Estimated noise=1577.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 13.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0624047 Jy ! Component: 100 - total flux cleaned = 0.0680308 Jy ! Component: 150 - total flux cleaned = 0.0723238 Jy ! Component: 200 - total flux cleaned = 0.0756483 Jy ! Total flux subtracted in 200 components = 0.0756483 Jy ! Clean residual min=-0.036688 max=0.035417 Jy/beam ! Clean residual mean=-0.001643 rms=0.008880 Jy/beam ! Combined flux in latest and established models = 0.559491 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.559491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.494151Jy sigma=0.001373 ! Fit after self-cal, rms=0.493513Jy sigma=0.001372 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 7.437 at -17.93 degrees (North through East) ! Clean map min=-0.03783 max=0.50242 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0179 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.92 KP 0.90 ! LA 0.95 MK 0.96 NL 1.00* OV 1.23 ! PT 0.93 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994031 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.09 HN 0.98 KP 0.93 ! LA 1.03 MK 0.98 NL 0.93 OV 1.20 ! PT 0.91 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04958 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.94 KP 0.86 ! LA 0.79 MK 0.84 NL 0.90 OV 1.05 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00286 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.07 HN 1.10 KP 0.92 ! LA 0.85 MK 0.99 NL 0.99 OV 1.06 ! PT 0.91 SC 0.98 ! ! ! Fit before self-cal, rms=0.493513Jy sigma=0.001372 ! Fit after self-cal, rms=0.476884Jy sigma=0.001356 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.476884Jy sigma=0.001356 ! Fit after self-cal, rms=0.476837Jy sigma=0.001356 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=7.27 mas, bpa=-18.29 degrees ! Estimated noise=1560.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132592 Jy ! Component: 100 - total flux cleaned = 0.0147967 Jy ! Component: 150 - total flux cleaned = 0.0141169 Jy ! Component: 200 - total flux cleaned = 0.014757 Jy ! Total flux subtracted in 200 components = 0.014757 Jy ! Clean residual min=-0.038629 max=0.025359 Jy/beam ! Clean residual mean=-0.001369 rms=0.008175 Jy/beam ! Combined flux in latest and established models = 0.574248 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 52 components and 0.574248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.475141Jy sigma=0.001351 ! Fit after self-cal, rms=0.475088Jy sigma=0.001351 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.475088Jy sigma=0.001351 ! Fit after self-cal, rms=0.470836Jy sigma=0.001338 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431484 Jy ! Component: 100 - total flux cleaned = 0.00480245 Jy ! Component: 150 - total flux cleaned = 0.00526044 Jy ! Component: 200 - total flux cleaned = 0.00526006 Jy ! Total flux subtracted in 200 components = 0.00526006 Jy ! Clean residual min=-0.035274 max=0.024199 Jy/beam ! Clean residual mean=-0.001217 rms=0.007742 Jy/beam ! Combined flux in latest and established models = 0.579508 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 69 components and 0.579508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.470163Jy sigma=0.001336 ! Fit after self-cal, rms=0.469187Jy sigma=0.001334 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 7.27 at -18.29 degrees (North through East) ! Clean map min=-0.033454 max=0.49976 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.469187Jy sigma=0.001334 ! Fit after self-cal, rms=4.498268Jy sigma=0.001280 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.498268Jy sigma=0.001280 ! Fit after self-cal, rms=4.500068Jy sigma=0.001279 ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=8.752 mas, bpa=-12.54 degrees ! Estimated noise=1569.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137287 Jy ! Component: 100 - total flux cleaned = 0.0125573 Jy ! Component: 150 - total flux cleaned = 0.0125582 Jy ! Component: 200 - total flux cleaned = 0.012558 Jy ! Total flux subtracted in 200 components = 0.012558 Jy ! Clean residual min=-0.011397 max=0.010424 Jy/beam ! Clean residual mean=0.000072 rms=0.002852 Jy/beam ! Combined flux in latest and established models = 0.592066 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.592066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.499933Jy sigma=0.001277 ! Fit after self-cal, rms=4.500061Jy sigma=0.001276 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.500061Jy sigma=0.001276 ! Fit after self-cal, rms=18.287788Jy sigma=0.001275 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.287788Jy sigma=0.001275 ! Fit after self-cal, rms=18.289116Jy sigma=0.001275 ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=8.676 mas, bpa=-12.31 degrees ! Estimated noise=1566.42 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402499 Jy ! Component: 100 - total flux cleaned = 0.00429028 Jy ! Component: 150 - total flux cleaned = 0.0047509 Jy ! Component: 200 - total flux cleaned = 0.00474344 Jy ! Total flux subtracted in 200 components = 0.00474344 Jy ! Clean residual min=-0.009884 max=0.008682 Jy/beam ! Clean residual mean=0.000122 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.59681 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 101 components and 0.59681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.289148Jy sigma=0.001274 ! Fit after self-cal, rms=18.289442Jy sigma=0.001274 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.779 mas, bmaj=17.85 mas, bpa=-9.384 degrees ! Estimated noise=1988.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123051 Jy ! Component: 100 - total flux cleaned = -0.000489843 Jy ! Component: 150 - total flux cleaned = -0.000656409 Jy ! Component: 200 - total flux cleaned = -0.000805586 Jy ! Total flux subtracted in 200 components = -0.000805586 Jy ! Clean residual min=-0.009279 max=0.009033 Jy/beam ! Clean residual mean=0.000232 rms=0.003123 Jy/beam ! Combined flux in latest and established models = 0.596004 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 109 components and 0.596004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.289463Jy sigma=0.001274 ! Fit after self-cal, rms=18.288744Jy sigma=0.001274 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.704 mas, bmaj=6.708 mas, bpa=-15.6 degrees ! Estimated noise=3010.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.478409 Jy ! Component: 100 - total flux cleaned = 0.577819 Jy ! Component: 150 - total flux cleaned = 0.588543 Jy ! Component: 200 - total flux cleaned = 0.588667 Jy ! Total flux subtracted in 200 components = 0.588667 Jy ! Clean residual min=-0.017449 max=0.016037 Jy/beam ! Clean residual mean=-0.000036 rms=0.004467 Jy/beam ! Combined flux in latest and established models = 0.588667 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.588667 Jy ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=8.676 mas, bpa=-12.31 degrees ! Estimated noise=1566.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959792 Jy ! Component: 100 - total flux cleaned = 0.0101308 Jy ! Component: 150 - total flux cleaned = 0.0105154 Jy ! Component: 200 - total flux cleaned = 0.0108678 Jy ! Total flux subtracted in 200 components = 0.0108678 Jy ! Clean residual min=-0.009685 max=0.010638 Jy/beam ! Clean residual mean=0.000059 rms=0.002754 Jy/beam ! Combined flux in latest and established models = 0.599535 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 51 components and 0.599535 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.779 mas, bmaj=17.85 mas, bpa=-9.384 degrees ! Estimated noise=1988.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000432086 Jy ! Component: 100 - total flux cleaned = -0.00128381 Jy ! Component: 150 - total flux cleaned = -0.00200357 Jy ! Component: 200 - total flux cleaned = -0.00231551 Jy ! Total flux subtracted in 200 components = -0.00231551 Jy ! Clean residual min=-0.009798 max=0.009400 Jy/beam ! Clean residual mean=0.000166 rms=0.003137 Jy/beam ! Combined flux in latest and established models = 0.597219 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.597219 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=8.676 mas, bpa=-12.31 degrees ! Estimated noise=1566.42 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559079 Jy ! Component: 100 - total flux cleaned = 0.000234642 Jy ! Component: 150 - total flux cleaned = 0.000232485 Jy ! Component: 200 - total flux cleaned = 0.000234366 Jy ! Total flux subtracted in 200 components = 0.000234366 Jy ! Clean residual min=-0.009127 max=0.009805 Jy/beam ! Clean residual mean=0.000074 rms=0.002514 Jy/beam ! Combined flux in latest and established models = 0.597454 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.597454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.288847Jy sigma=0.001276 ! Fit after self-cal, rms=18.287451Jy sigma=0.001275 wmodel J1120-2719_S_1997_08_27_yyk\_map.mod ! Writing 80 model components to file: J1120-2719_S_1997_08_27_yyk_map.mod wobs J1120-2719_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1120-2719_S_1997_08_27_yyk_uvs.fits wwins J1120-2719_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J1120-2719_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148832 Jy ! Component: 100 - total flux cleaned = -0.00149151 Jy ! Component: 150 - total flux cleaned = -0.00107748 Jy ! Component: 200 - total flux cleaned = -0.00120689 Jy ! Component: 250 - total flux cleaned = -0.00145316 Jy ! Component: 300 - total flux cleaned = -0.00121508 Jy ! Component: 350 - total flux cleaned = -0.00132821 Jy ! Component: 400 - total flux cleaned = -0.00143567 Jy ! Component: 450 - total flux cleaned = -0.00153978 Jy ! Component: 500 - total flux cleaned = -0.00164253 Jy ! Component: 550 - total flux cleaned = -0.00164168 Jy ! Component: 600 - total flux cleaned = -0.00183523 Jy ! Component: 650 - total flux cleaned = -0.00192618 Jy ! Component: 700 - total flux cleaned = -0.00192409 Jy ! Component: 750 - total flux cleaned = -0.00219138 Jy ! Component: 800 - total flux cleaned = -0.00245375 Jy ! Component: 850 - total flux cleaned = -0.00262612 Jy ! Component: 900 - total flux cleaned = -0.00287806 Jy ! Component: 950 - total flux cleaned = -0.00304256 Jy ! Component: 1000 - total flux cleaned = -0.00320446 Jy ! Component: 1050 - total flux cleaned = -0.00344219 Jy ! Component: 1100 - total flux cleaned = -0.00359862 Jy ! Component: 1150 - total flux cleaned = -0.00367495 Jy ! Component: 1200 - total flux cleaned = -0.00367497 Jy ! Component: 1250 - total flux cleaned = -0.00374934 Jy ! Component: 1300 - total flux cleaned = -0.00375006 Jy ! Component: 1350 - total flux cleaned = -0.00396821 Jy ! Component: 1400 - total flux cleaned = -0.00411052 Jy ! Component: 1450 - total flux cleaned = -0.00411037 Jy ! Component: 1500 - total flux cleaned = -0.00417941 Jy ! Component: 1550 - total flux cleaned = -0.0040416 Jy ! Component: 1600 - total flux cleaned = -0.00404202 Jy ! Component: 1650 - total flux cleaned = -0.00410827 Jy ! Component: 1700 - total flux cleaned = -0.00397588 Jy ! Component: 1750 - total flux cleaned = -0.00391081 Jy ! Component: 1800 - total flux cleaned = -0.00384689 Jy ! Component: 1850 - total flux cleaned = -0.00378333 Jy ! Component: 1900 - total flux cleaned = -0.00365694 Jy ! Component: 1950 - total flux cleaned = -0.00353164 Jy ! Component: 2000 - total flux cleaned = -0.00328417 Jy ! Total flux subtracted in 2048 components = -0.00328434 Jy ! Clean residual min=-0.003069 max=0.003665 Jy/beam ! Clean residual mean=0.000106 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.594169 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 213 components and 0.594169 Jy ![Exited script file: muppet] wmap "J1120-2719_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.341 x 8.676 at -12.31 degrees (North through East) ! Clean map min=-0.01184 max=0.53686 Jy/beam ! Writing clean map to FITS file: J1120-2719_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.536864 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00123346 device "J1120-2719_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1120-2719_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.689258 0.689258 1.37852 2.75703 5.51406 11.0281 22.0562 44.1125 88.225 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.536 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.341 x 8.676 at -12.31 degrees (North through East) ! Clean map min=-0.01184 max=0.53686 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1120-2719_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1120-2719_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1120-2719_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 17:44:30 2007