! Started logfile: J1114-0816_S_1997_05_07_yyk_uvs.log on Sun Jan 7 17:42:51 2007 obs J1114-0816_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1114-0816_S_1997_05_07_yyk_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976705 visibilities/baseline/integration-bin. ! Found source: J1114-0816 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 25492 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1114-0816_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.49839 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=7.305 mas, bpa=-5.328 degrees ! Estimated noise=1443.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.340125 Jy ! Component: 100 - total flux cleaned = 0.380389 Jy ! Total flux subtracted in 100 components = 0.380389 Jy ! Clean residual min=-0.016231 max=0.024251 Jy/beam ! Clean residual mean=0.000105 rms=0.004786 Jy/beam ! Combined flux in latest and established models = 0.380389 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.380389 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.296794Jy sigma=0.001234 ! Fit after self-cal, rms=0.296705Jy sigma=0.001234 ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=7.305 mas, bpa=-5.328 degrees ! Estimated noise=1443.55 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=8.81 mas, bpa=-5.412 degrees ! Estimated noise=987.134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122962 Jy ! Component: 100 - total flux cleaned = 0.0137296 Jy ! Component: 150 - total flux cleaned = 0.0144083 Jy ! Component: 200 - total flux cleaned = 0.01501 Jy ! Total flux subtracted in 200 components = 0.01501 Jy ! Clean residual min=-0.012174 max=0.031109 Jy/beam ! Clean residual mean=0.000451 rms=0.005609 Jy/beam ! Combined flux in latest and established models = 0.395399 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.395399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295992Jy sigma=0.001231 ! Fit after self-cal, rms=0.295975Jy sigma=0.001231 ! Inverting map ! Added new window around map position (10, -10). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379175 Jy ! Component: 100 - total flux cleaned = 0.0551655 Jy ! Component: 150 - total flux cleaned = 0.0654565 Jy ! Component: 200 - total flux cleaned = 0.0700399 Jy ! Total flux subtracted in 200 components = 0.0700399 Jy ! Clean residual min=-0.008141 max=0.014366 Jy/beam ! Clean residual mean=0.000173 rms=0.003165 Jy/beam ! Combined flux in latest and established models = 0.465439 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 53 model components to the UV plane model. ! The established model now contains 66 components and 0.465439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292703Jy sigma=0.001214 ! Fit after self-cal, rms=0.292331Jy sigma=0.001212 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.55 x 8.81 at -5.412 degrees (North through East) ! Clean map min=-0.0073084 max=0.38413 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02541 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 0.99 KP 0.92 ! LA 0.97 MK 1.00 NL 1.00* OV 1.08 ! PT 0.94 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.972156 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.12 HN 1.08 KP 1.01 ! LA 1.09 MK 1.03 NL 1.03 OV 1.04 ! PT 0.92 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04849 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 0.95 KP 0.93 ! LA 0.83 MK 0.85 NL 0.96 OV 0.95 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.990389 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.10 HN 1.05 KP 0.95 ! LA 0.88 MK 1.04 NL 1.12 OV 1.07 ! PT 0.91 SC 1.01 ! ! ! Fit before self-cal, rms=0.292331Jy sigma=0.001212 ! Fit after self-cal, rms=0.285158Jy sigma=0.001201 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285158Jy sigma=0.001201 ! Fit after self-cal, rms=0.285156Jy sigma=0.001201 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=8.653 mas, bpa=-4.721 degrees ! Estimated noise=992.756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573586 Jy ! Component: 100 - total flux cleaned = 0.00670343 Jy ! Component: 150 - total flux cleaned = 0.00670683 Jy ! Component: 200 - total flux cleaned = 0.00657398 Jy ! Total flux subtracted in 200 components = 0.00657398 Jy ! Clean residual min=-0.004803 max=0.005480 Jy/beam ! Clean residual mean=0.000002 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.472013 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 90 components and 0.472013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284922Jy sigma=0.001200 ! Fit after self-cal, rms=0.284910Jy sigma=0.001200 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284910Jy sigma=0.001200 ! Fit after self-cal, rms=0.282347Jy sigma=0.001188 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191263 Jy ! Component: 100 - total flux cleaned = 0.00191945 Jy ! Component: 150 - total flux cleaned = 0.00192056 Jy ! Component: 200 - total flux cleaned = 0.00182181 Jy ! Total flux subtracted in 200 components = 0.00182181 Jy ! Clean residual min=-0.004684 max=0.004957 Jy/beam ! Clean residual mean=0.000004 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.473835 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 0.473835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282237Jy sigma=0.001187 ! Fit after self-cal, rms=0.281926Jy sigma=0.001186 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.513 x 8.653 at -4.721 degrees (North through East) ! Clean map min=-0.0043711 max=0.38963 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281926Jy sigma=0.001186 ! Fit after self-cal, rms=0.279204Jy sigma=0.001179 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279204Jy sigma=0.001179 ! Fit after self-cal, rms=0.279125Jy sigma=0.001179 ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=8.636 mas, bpa=-4.629 degrees ! Estimated noise=987.182 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000467217 Jy ! Component: 100 - total flux cleaned = -0.000696696 Jy ! Component: 150 - total flux cleaned = -0.000703466 Jy ! Component: 200 - total flux cleaned = -0.000785942 Jy ! Total flux subtracted in 200 components = -0.000785942 Jy ! Clean residual min=-0.003975 max=0.004611 Jy/beam ! Clean residual mean=0.000016 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.473049 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 122 components and 0.473049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279055Jy sigma=0.001178 ! Fit after self-cal, rms=0.279022Jy sigma=0.001178 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279022Jy sigma=0.001178 ! Fit after self-cal, rms=0.279392Jy sigma=0.001177 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279392Jy sigma=0.001177 ! Fit after self-cal, rms=0.279377Jy sigma=0.001177 ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=8.63 mas, bpa=-4.519 degrees ! Estimated noise=987.271 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169879 Jy ! Component: 100 - total flux cleaned = -0.00016985 Jy ! Component: 150 - total flux cleaned = -0.000238471 Jy ! Component: 200 - total flux cleaned = -0.000238367 Jy ! Total flux subtracted in 200 components = -0.000238367 Jy ! Clean residual min=-0.004042 max=0.004454 Jy/beam ! Clean residual mean=0.000016 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.472811 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 133 components and 0.472811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279341Jy sigma=0.001177 ! Fit after self-cal, rms=0.279332Jy sigma=0.001177 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.076 mas, bmaj=14.03 mas, bpa=-1.391 degrees ! Estimated noise=1230.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000461925 Jy ! Component: 100 - total flux cleaned = 0.000340875 Jy ! Component: 150 - total flux cleaned = 0.000340918 Jy ! Component: 200 - total flux cleaned = 0.000340246 Jy ! Total flux subtracted in 200 components = 0.000340246 Jy ! Clean residual min=-0.004404 max=0.005290 Jy/beam ! Clean residual mean=0.000034 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.473151 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 148 components and 0.473151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279333Jy sigma=0.001177 ! Fit after self-cal, rms=0.279327Jy sigma=0.001177 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=7.238 mas, bpa=-4.951 degrees ! Estimated noise=1441.75 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.341519 Jy ! Component: 100 - total flux cleaned = 0.393138 Jy ! Component: 150 - total flux cleaned = 0.41781 Jy ! Component: 200 - total flux cleaned = 0.43449 Jy ! Total flux subtracted in 200 components = 0.43449 Jy ! Clean residual min=-0.007741 max=0.009102 Jy/beam ! Clean residual mean=0.000028 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 0.43449 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.43449 Jy ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=8.63 mas, bpa=-4.519 degrees ! Estimated noise=987.271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165728 Jy ! Component: 100 - total flux cleaned = 0.0258138 Jy ! Component: 150 - total flux cleaned = 0.0310037 Jy ! Component: 200 - total flux cleaned = 0.0322117 Jy ! Total flux subtracted in 200 components = 0.0322117 Jy ! Clean residual min=-0.004153 max=0.004702 Jy/beam ! Clean residual mean=0.000042 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.466702 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 74 components and 0.466702 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.076 mas, bmaj=14.03 mas, bpa=-1.391 degrees ! Estimated noise=1230.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409661 Jy ! Component: 100 - total flux cleaned = 0.00480797 Jy ! Component: 150 - total flux cleaned = 0.00526183 Jy ! Component: 200 - total flux cleaned = 0.0054599 Jy ! Total flux subtracted in 200 components = 0.0054599 Jy ! Clean residual min=-0.004366 max=0.005163 Jy/beam ! Clean residual mean=0.000044 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 0.472161 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 111 components and 0.472161 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=8.63 mas, bpa=-4.519 degrees ! Estimated noise=987.271 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170494 Jy ! Component: 100 - total flux cleaned = -0.00226401 Jy ! Component: 150 - total flux cleaned = -0.00236475 Jy ! Component: 200 - total flux cleaned = -0.00245142 Jy ! Total flux subtracted in 200 components = -0.00245142 Jy ! Clean residual min=-0.004360 max=0.004672 Jy/beam ! Clean residual mean=0.000032 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.46971 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 123 components and 0.46971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279405Jy sigma=0.001177 ! Fit after self-cal, rms=0.279397Jy sigma=0.001177 wmodel J1114-0816_S_1997_05_07_yyk\_map.mod ! Writing 123 model components to file: J1114-0816_S_1997_05_07_yyk_map.mod wobs J1114-0816_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1114-0816_S_1997_05_07_yyk_uvs.fits wwins J1114-0816_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J1114-0816_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808118 Jy ! Component: 100 - total flux cleaned = 0.00172963 Jy ! Component: 150 - total flux cleaned = 0.00199271 Jy ! Component: 200 - total flux cleaned = 0.002113 Jy ! Component: 250 - total flux cleaned = 0.00234271 Jy ! Component: 300 - total flux cleaned = 0.00272715 Jy ! Component: 350 - total flux cleaned = 0.0030952 Jy ! Component: 400 - total flux cleaned = 0.0036567 Jy ! Component: 450 - total flux cleaned = 0.0041014 Jy ! Component: 500 - total flux cleaned = 0.00467831 Jy ! Component: 550 - total flux cleaned = 0.00509942 Jy ! Component: 600 - total flux cleaned = 0.00555766 Jy ! Component: 650 - total flux cleaned = 0.00600552 Jy ! Component: 700 - total flux cleaned = 0.00618154 Jy ! Component: 750 - total flux cleaned = 0.00643979 Jy ! Component: 800 - total flux cleaned = 0.00665106 Jy ! Component: 850 - total flux cleaned = 0.00694103 Jy ! Component: 900 - total flux cleaned = 0.00714357 Jy ! Component: 950 - total flux cleaned = 0.00734262 Jy ! Component: 1000 - total flux cleaned = 0.0075786 Jy ! Component: 1050 - total flux cleaned = 0.00784759 Jy ! Component: 1100 - total flux cleaned = 0.00807506 Jy ! Component: 1150 - total flux cleaned = 0.00837264 Jy ! Component: 1200 - total flux cleaned = 0.00862865 Jy ! Component: 1250 - total flux cleaned = 0.0089163 Jy ! Component: 1300 - total flux cleaned = 0.00909394 Jy ! Component: 1350 - total flux cleaned = 0.0095133 Jy ! Component: 1400 - total flux cleaned = 0.00978883 Jy ! Component: 1450 - total flux cleaned = 0.0101288 Jy ! Component: 1500 - total flux cleaned = 0.0105302 Jy ! Component: 1550 - total flux cleaned = 0.0108271 Jy ! Component: 1600 - total flux cleaned = 0.0110878 Jy ! Component: 1650 - total flux cleaned = 0.0113774 Jy ! Component: 1700 - total flux cleaned = 0.0116948 Jy ! Component: 1750 - total flux cleaned = 0.0120705 Jy ! Component: 1800 - total flux cleaned = 0.0122872 Jy ! Component: 1850 - total flux cleaned = 0.0125323 Jy ! Component: 1900 - total flux cleaned = 0.0128648 Jy ! Component: 1950 - total flux cleaned = 0.0131633 Jy ! Component: 2000 - total flux cleaned = 0.0134588 Jy ! Total flux subtracted in 2048 components = 0.0137511 Jy ! Clean residual min=-0.001739 max=0.001945 Jy/beam ! Clean residual mean=0.000020 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.483461 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 256 components and 0.483461 Jy ![Exited script file: muppet] wmap "J1114-0816_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.497 x 8.63 at -4.519 degrees (North through East) ! Clean map min=-0.0038768 max=0.3914 Jy/beam ! Writing clean map to FITS file: J1114-0816_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.391402 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000594043 device "J1114-0816_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1114-0816_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.45532 0.45532 0.910639 1.82128 3.64256 7.28511 14.5702 29.1405 58.2809 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.391 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.497 x 8.63 at -4.519 degrees (North through East) ! Clean map min=-0.0038768 max=0.3914 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1114-0816_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1114-0816_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1114-0816_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 17:42:59 2007