! Started logfile: J1112-2158_X_1997_07_02_yyk_uvs.log on Mon Jan 8 05:12:41 2007 obs J1112-2158_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1112-2158_X_1997_07_02_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.538117 visibilities/baseline/integration-bin. ! Found source: J1112-2158 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 13948 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1112-2158_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.266269 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9484 mas, bmaj=2.795 mas, bpa=8.851 degrees ! Estimated noise=1439.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573774 Jy ! Component: 100 - total flux cleaned = 0.078219 Jy ! Total flux subtracted in 100 components = 0.078219 Jy ! Clean residual min=-0.014473 max=0.021165 Jy/beam ! Clean residual mean=-0.000223 rms=0.004738 Jy/beam ! Combined flux in latest and established models = 0.078219 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.078219 Jy ! ! Correcting IF 1. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.253579Jy sigma=0.001463 ! Fit after self-cal, rms=0.253298Jy sigma=0.001461 ! Inverting map and beam ! Estimated beam: bmin=0.9484 mas, bmaj=2.795 mas, bpa=8.851 degrees ! Estimated noise=1439.4 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.17 mas, bmaj=3.15 mas, bpa=6.526 degrees ! Estimated noise=1003.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.031866 Jy ! Component: 100 - total flux cleaned = 0.0478661 Jy ! Component: 150 - total flux cleaned = 0.0566179 Jy ! Component: 200 - total flux cleaned = 0.0614505 Jy ! Total flux subtracted in 200 components = 0.0614505 Jy ! Clean residual min=-0.019925 max=0.027964 Jy/beam ! Clean residual mean=-0.000452 rms=0.007782 Jy/beam ! Combined flux in latest and established models = 0.139669 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 47 components and 0.139669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250835Jy sigma=0.001443 ! Fit after self-cal, rms=0.250807Jy sigma=0.001443 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.17 x 3.15 at 6.526 degrees (North through East) ! Clean map min=-0.019968 max=0.074226 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.250807Jy sigma=0.001443 ! Fit after self-cal, rms=0.250807Jy sigma=0.001443 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250807Jy sigma=0.001443 ! Fit after self-cal, rms=0.250807Jy sigma=0.001443 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.17 mas, bmaj=3.15 mas, bpa=6.526 degrees ! Estimated noise=1003.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280869 Jy ! Component: 100 - total flux cleaned = 0.00347346 Jy ! Component: 150 - total flux cleaned = 0.00404169 Jy ! Component: 200 - total flux cleaned = 0.00420902 Jy ! Total flux subtracted in 200 components = 0.00420902 Jy ! Clean residual min=-0.019933 max=0.027731 Jy/beam ! Clean residual mean=-0.000447 rms=0.007714 Jy/beam ! Combined flux in latest and established models = 0.143878 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.143878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250751Jy sigma=0.001443 ! Fit after self-cal, rms=0.250744Jy sigma=0.001443 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250744Jy sigma=0.001443 ! Fit after self-cal, rms=0.248133Jy sigma=0.001428 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660074 Jy ! Component: 100 - total flux cleaned = 0.00841061 Jy ! Component: 150 - total flux cleaned = 0.00878798 Jy ! Component: 200 - total flux cleaned = 0.00913876 Jy ! Total flux subtracted in 200 components = 0.00913876 Jy ! Clean residual min=-0.019831 max=0.028156 Jy/beam ! Clean residual mean=-0.000431 rms=0.007863 Jy/beam ! Combined flux in latest and established models = 0.153017 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.153017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247964Jy sigma=0.001427 ! Fit after self-cal, rms=0.247686Jy sigma=0.001426 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.17 x 3.15 at 6.526 degrees (North through East) ! Clean map min=-0.019109 max=0.079625 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.186 mas, bmaj=4.465 mas, bpa=-6.995 degrees ! Estimated noise=1195.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00927738 Jy ! Component: 100 - total flux cleaned = 0.0101835 Jy ! Component: 150 - total flux cleaned = 0.0107839 Jy ! Component: 200 - total flux cleaned = 0.0113364 Jy ! Total flux subtracted in 200 components = 0.0113364 Jy ! Clean residual min=-0.028666 max=0.043140 Jy/beam ! Clean residual mean=-0.000666 rms=0.012725 Jy/beam ! Combined flux in latest and established models = 0.164354 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.164354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247816Jy sigma=0.001427 ! Fit after self-cal, rms=0.247726Jy sigma=0.001426 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9484 mas, bmaj=2.795 mas, bpa=8.851 degrees ! Estimated noise=1439.4 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0620664 Jy ! Component: 100 - total flux cleaned = 0.0858236 Jy ! Component: 150 - total flux cleaned = 0.101043 Jy ! Component: 200 - total flux cleaned = 0.111441 Jy ! Total flux subtracted in 200 components = 0.111441 Jy ! Clean residual min=-0.015638 max=0.020878 Jy/beam ! Clean residual mean=-0.000215 rms=0.004746 Jy/beam ! Combined flux in latest and established models = 0.111441 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.111441 Jy ! Inverting map and beam ! Estimated beam: bmin=1.17 mas, bmaj=3.15 mas, bpa=6.526 degrees ! Estimated noise=1003.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219723 Jy ! Component: 100 - total flux cleaned = 0.0328173 Jy ! Component: 150 - total flux cleaned = 0.0387892 Jy ! Component: 200 - total flux cleaned = 0.0420982 Jy ! Total flux subtracted in 200 components = 0.0420982 Jy ! Clean residual min=-0.019847 max=0.028180 Jy/beam ! Clean residual mean=-0.000426 rms=0.007842 Jy/beam ! Combined flux in latest and established models = 0.15354 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.15354 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.186 mas, bmaj=4.465 mas, bpa=-6.995 degrees ! Estimated noise=1195.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00920097 Jy ! Component: 100 - total flux cleaned = 0.010158 Jy ! Component: 150 - total flux cleaned = 0.0107984 Jy ! Component: 200 - total flux cleaned = 0.0113833 Jy ! Total flux subtracted in 200 components = 0.0113833 Jy ! Clean residual min=-0.028987 max=0.043026 Jy/beam ! Clean residual mean=-0.000667 rms=0.012736 Jy/beam ! Combined flux in latest and established models = 0.164923 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.164923 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.17 mas, bmaj=3.15 mas, bpa=6.526 degrees ! Estimated noise=1003.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00619493 Jy ! Component: 100 - total flux cleaned = -0.00670402 Jy ! Component: 150 - total flux cleaned = -0.00698163 Jy ! Component: 200 - total flux cleaned = -0.00721195 Jy ! Total flux subtracted in 200 components = -0.00721195 Jy ! Clean residual min=-0.019996 max=0.028366 Jy/beam ! Clean residual mean=-0.000415 rms=0.007794 Jy/beam ! Combined flux in latest and established models = 0.157711 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.157711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247619Jy sigma=0.001425 ! Fit after self-cal, rms=0.247444Jy sigma=0.001424 wmodel J1112-2158_X_1997_07_02_yyk\_map.mod ! Writing 58 model components to file: J1112-2158_X_1997_07_02_yyk_map.mod wobs J1112-2158_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1112-2158_X_1997_07_02_yyk_uvs.fits wwins J1112-2158_X_1997_07_02_yyk\_map.win ! wwins: Wrote 1 windows to J1112-2158_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117991 Jy ! Component: 100 - total flux cleaned = 0.0208823 Jy ! Component: 150 - total flux cleaned = 0.0269562 Jy ! Component: 200 - total flux cleaned = 0.032553 Jy ! Component: 250 - total flux cleaned = 0.0374941 Jy ! Component: 300 - total flux cleaned = 0.0424518 Jy ! Component: 350 - total flux cleaned = 0.046597 Jy ! Component: 400 - total flux cleaned = 0.0494831 Jy ! Component: 450 - total flux cleaned = 0.0519775 Jy ! Component: 500 - total flux cleaned = 0.053883 Jy ! Component: 550 - total flux cleaned = 0.0559418 Jy ! Component: 600 - total flux cleaned = 0.0583448 Jy ! Component: 650 - total flux cleaned = 0.0602241 Jy ! Component: 700 - total flux cleaned = 0.0622203 Jy ! Component: 750 - total flux cleaned = 0.0633689 Jy ! Component: 800 - total flux cleaned = 0.0648506 Jy ! Component: 850 - total flux cleaned = 0.066624 Jy ! Component: 900 - total flux cleaned = 0.0683182 Jy ! Component: 950 - total flux cleaned = 0.069295 Jy ! Component: 1000 - total flux cleaned = 0.0705531 Jy ! Component: 1050 - total flux cleaned = 0.0716116 Jy ! Component: 1100 - total flux cleaned = 0.0723373 Jy ! Component: 1150 - total flux cleaned = 0.0726199 Jy ! Component: 1200 - total flux cleaned = 0.0733057 Jy ! Component: 1250 - total flux cleaned = 0.0737034 Jy ! Component: 1300 - total flux cleaned = 0.0742195 Jy ! Component: 1350 - total flux cleaned = 0.0748401 Jy ! Component: 1400 - total flux cleaned = 0.0753203 Jy ! Component: 1450 - total flux cleaned = 0.0756717 Jy ! Component: 1500 - total flux cleaned = 0.0762328 Jy ! Component: 1550 - total flux cleaned = 0.0765553 Jy ! Component: 1600 - total flux cleaned = 0.0765545 Jy ! Component: 1650 - total flux cleaned = 0.0767615 Jy ! Component: 1700 - total flux cleaned = 0.077063 Jy ! Component: 1750 - total flux cleaned = 0.0772605 Jy ! Component: 1800 - total flux cleaned = 0.0777353 Jy ! Component: 1850 - total flux cleaned = 0.0779189 Jy ! Component: 1900 - total flux cleaned = 0.078097 Jy ! Component: 1950 - total flux cleaned = 0.0780982 Jy ! Component: 2000 - total flux cleaned = 0.0783554 Jy ! Total flux subtracted in 2048 components = 0.0786865 Jy ! Clean residual min=-0.004099 max=0.004647 Jy/beam ! Clean residual mean=-0.000100 rms=0.001973 Jy/beam ! Combined flux in latest and established models = 0.236397 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 341 components and 0.236397 Jy ![Exited script file: muppet] wmap "J1112-2158_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.17 x 3.15 at 6.526 degrees (North through East) ! Clean map min=-0.0094906 max=0.074905 Jy/beam ! Writing clean map to FITS file: J1112-2158_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.074905 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00193162 device "J1112-2158_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1112-2158_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.7363 7.7363 15.4726 30.9452 61.8904 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0057 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.17 x 3.15 at 6.526 degrees (North through East) ! Clean map min=-0.0094906 max=0.074905 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1112-2158_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1112-2158_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1112-2158_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 05:12:49 2007