! Started logfile: J1112-2158_S_1997_08_27_yyk_uvs.log on Sun Jan  7 17:42:43 2007
obs J1112-2158_S_1997_08_27_yyk_uva.fits
! Reading UV FITS file: J1112-2158_S_1997_08_27_yyk_uva.fits
! AN table 1: 108 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.689918 visibilities/baseline/integration-bin.
! Found source: J1112-2158
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22447e+09        8e+06          1        8e+06
!  02        2  2.23447e+09        8e+06          1        8e+06
!  03        3  2.29447e+09        8e+06          1        8e+06
!  04        4  2.32447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 703 lines of history.
! 
! Reading 13412 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1112-2158_S_1997_08_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.606116 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.017 mas, bmaj=9.448 mas, bpa=-30.56 degrees
! Estimated noise=3061.07 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.215839 Jy
! Component: 100  -  total flux cleaned = 0.310817 Jy
! Total flux subtracted in 100 components = 0.310817 Jy
! Clean residual min=-0.068383 max=0.098647 Jy/beam
! Clean residual mean=0.002127 rms=0.021386 Jy/beam
! Combined flux in latest and established models = 0.310817 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.310817 Jy
! 
! Correcting IF 1.
!  A total of 287 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.511880Jy  sigma=0.001704
! Fit after  self-cal, rms=0.510794Jy  sigma=0.001700
! Inverting map and beam 
! Estimated beam: bmin=3.017 mas, bmaj=9.448 mas, bpa=-30.56 degrees
! Estimated noise=3061.07 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.648 mas, bmaj=12.07 mas, bpa=-25.13 degrees
! Estimated noise=1792.95 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.13305 Jy
! Component: 100  -  total flux cleaned = 0.192044 Jy
! Component: 150  -  total flux cleaned = 0.219739 Jy
! Component: 200  -  total flux cleaned = 0.230146 Jy
! Total flux subtracted in 200 components = 0.230146 Jy
! Clean residual min=-0.052727 max=0.157747 Jy/beam
! Clean residual mean=0.002314 rms=0.032013 Jy/beam
! Combined flux in latest and established models = 0.540964 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 86 components and 0.540964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.489076Jy  sigma=0.001615
! Fit after  self-cal, rms=0.488913Jy  sigma=0.001613
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.648 x 12.07 at -25.13 degrees (North through East)
! Clean map  min=-0.054115  max=0.24764 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.838043
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.90     HN        0.70     KP        1.61     
!   LA        0.84     MK        0.98     NL        1.00*    OV        3.35     
!   PT        0.65     SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.799543
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.87     HN        0.77     KP        1.72     
!   LA        0.92     MK        1.52     NL        0.94     OV        3.10     
!   PT        0.65     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.872299
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.89     HN        0.75     KP        1.72     
!   LA        0.67     MK        1.20     NL        0.87     OV        2.68     
!   PT        0.76     SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.661887
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.89     HN        0.91     KP        1.67     
!   LA        0.76     MK        4.20     NL        1.01     OV        3.05     
!   PT        0.66     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.488913Jy  sigma=0.001613
! Fit after  self-cal, rms=0.684865Jy  sigma=0.001820
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.684865Jy  sigma=0.001820
! Fit after  self-cal, rms=0.689357Jy  sigma=0.001811
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.303 mas, bmaj=14.25 mas, bpa=-19.6 degrees
! Estimated noise=991.726 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.13741 Jy
! Component: 100  -  total flux cleaned = -0.18381 Jy
! Component: 150  -  total flux cleaned = -0.201848 Jy
! Component: 200  -  total flux cleaned = -0.209969 Jy
! Total flux subtracted in 200 components = -0.209969 Jy
! Clean residual min=-0.016124 max=0.036928 Jy/beam
! Clean residual mean=0.000375 rms=0.006871 Jy/beam
! Combined flux in latest and established models = 0.330995 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 125 components and 0.330995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.686648Jy  sigma=0.001522
! Fit after  self-cal, rms=0.687019Jy  sigma=0.001521
! Inverting map 
! Added new window around map position (17.5, 27.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0298172 Jy
! Component: 100  -  total flux cleaned = 0.0299092 Jy
! Component: 150  -  total flux cleaned = 0.0285599 Jy
! Component: 200  -  total flux cleaned = 0.0273727 Jy
! Total flux subtracted in 200 components = 0.0273727 Jy
! Clean residual min=-0.015614 max=0.017309 Jy/beam
! Clean residual mean=0.000087 rms=0.005202 Jy/beam
! Combined flux in latest and established models = 0.358367 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 158 components and 0.358367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.678374Jy  sigma=0.001488
! Fit after  self-cal, rms=0.676512Jy  sigma=0.001483
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.676512Jy  sigma=0.001483
! Fit after  self-cal, rms=0.676194Jy  sigma=0.001478
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169402 Jy
! Component: 100  -  total flux cleaned = 0.0158424 Jy
! Component: 150  -  total flux cleaned = 0.0133668 Jy
! Component: 200  -  total flux cleaned = 0.012006 Jy
! Total flux subtracted in 200 components = 0.012006 Jy
! Clean residual min=-0.013751 max=0.016996 Jy/beam
! Clean residual mean=-0.000044 rms=0.004921 Jy/beam
! Combined flux in latest and established models = 0.370373 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 55 model components to the UV plane model.
! The established model now contains 196 components and 0.370374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.672360Jy  sigma=0.001465
! Fit after  self-cal, rms=0.671545Jy  sigma=0.001463
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.303 x 14.25 at -19.6 degrees (North through East)
! Clean map  min=-0.018283  max=0.1585 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.671545Jy  sigma=0.001463
! Fit after  self-cal, rms=1.926466Jy  sigma=0.001385
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.926466Jy  sigma=0.001385
! Fit after  self-cal, rms=1.926880Jy  sigma=0.001385
! Inverting map and beam 
! Estimated beam: bmin=4.703 mas, bmaj=16.05 mas, bpa=-20.92 degrees
! Estimated noise=930.454 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0282496 Jy
! Component: 100  -  total flux cleaned = 0.0351842 Jy
! Component: 150  -  total flux cleaned = 0.0384162 Jy
! Component: 200  -  total flux cleaned = 0.0384166 Jy
! Total flux subtracted in 200 components = 0.0384166 Jy
! Clean residual min=-0.018303 max=0.015877 Jy/beam
! Clean residual mean=-0.000456 rms=0.004611 Jy/beam
! Combined flux in latest and established models = 0.40879 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 76 model components to the UV plane model.
! The established model now contains 266 components and 0.40879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.925981Jy  sigma=0.001347
! Fit after  self-cal, rms=1.925503Jy  sigma=0.001342
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.925503Jy  sigma=0.001342
! Fit after  self-cal, rms=4.318431Jy  sigma=0.001327
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=4.318431Jy  sigma=0.001327
! Fit after  self-cal, rms=4.317678Jy  sigma=0.001327
! Inverting map and beam 
! Estimated beam: bmin=5.051 mas, bmaj=15.76 mas, bpa=-21.82 degrees
! Estimated noise=917.068 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192387 Jy
! Component: 100  -  total flux cleaned = 0.0221806 Jy
! Component: 150  -  total flux cleaned = 0.0221669 Jy
! Component: 200  -  total flux cleaned = 0.0221831 Jy
! Total flux subtracted in 200 components = 0.0221831 Jy
! Clean residual min=-0.010967 max=0.013926 Jy/beam
! Clean residual mean=-0.000266 rms=0.003735 Jy/beam
! Combined flux in latest and established models = 0.430973 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 43 model components to the UV plane model.
! The established model now contains 299 components and 0.430973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=4.317302Jy  sigma=0.001306
! Fit after  self-cal, rms=4.317556Jy  sigma=0.001303
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.779 mas, bmaj=21.12 mas, bpa=-16.1 degrees
! Estimated noise=1009.75 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00783751 Jy
! Component: 100  -  total flux cleaned = 0.00787232 Jy
! Component: 150  -  total flux cleaned = 0.00740347 Jy
! Component: 200  -  total flux cleaned = 0.00722234 Jy
! Total flux subtracted in 200 components = 0.00722235 Jy
! Clean residual min=-0.011746 max=0.010096 Jy/beam
! Clean residual mean=-0.000487 rms=0.003498 Jy/beam
! Combined flux in latest and established models = 0.438196 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 333 components and 0.438196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=4.317467Jy  sigma=0.001299
! Fit after  self-cal, rms=4.318114Jy  sigma=0.001299
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.577 mas, bmaj=11.58 mas, bpa=-27.02 degrees
! Estimated noise=2012.01 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.149581 Jy
! Component: 100  -  total flux cleaned = 0.236893 Jy
! Component: 150  -  total flux cleaned = 0.299591 Jy
! Component: 200  -  total flux cleaned = 0.346407 Jy
! Total flux subtracted in 200 components = 0.346407 Jy
! Clean residual min=-0.023963 max=0.027720 Jy/beam
! Clean residual mean=0.000123 rms=0.007777 Jy/beam
! Combined flux in latest and established models = 0.346407 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.346407 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.051 mas, bmaj=15.76 mas, bpa=-21.82 degrees
! Estimated noise=917.068 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0458086 Jy
! Component: 100  -  total flux cleaned = 0.0719684 Jy
! Component: 150  -  total flux cleaned = 0.0828489 Jy
! Component: 200  -  total flux cleaned = 0.0896732 Jy
! Total flux subtracted in 200 components = 0.0896733 Jy
! Clean residual min=-0.014375 max=0.013991 Jy/beam
! Clean residual mean=-0.000316 rms=0.004032 Jy/beam
! Combined flux in latest and established models = 0.43608 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 93 components and 0.43608 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.779 mas, bmaj=21.12 mas, bpa=-16.1 degrees
! Estimated noise=1009.75 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00630507 Jy
! Component: 100  -  total flux cleaned = 0.00891462 Jy
! Component: 150  -  total flux cleaned = 0.0109546 Jy
! Component: 200  -  total flux cleaned = 0.0120548 Jy
! Total flux subtracted in 200 components = 0.0120548 Jy
! Clean residual min=-0.013791 max=0.011243 Jy/beam
! Clean residual mean=-0.000544 rms=0.003664 Jy/beam
! Combined flux in latest and established models = 0.448135 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 131 components and 0.448135 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.051 mas, bmaj=15.76 mas, bpa=-21.82 degrees
! Estimated noise=917.068 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147763 Jy
! Component: 100  -  total flux cleaned = 0.00334128 Jy
! Component: 150  -  total flux cleaned = 0.00375607 Jy
! Component: 200  -  total flux cleaned = 0.00394892 Jy
! Total flux subtracted in 200 components = 0.00394892 Jy
! Clean residual min=-0.011880 max=0.010279 Jy/beam
! Clean residual mean=-0.000411 rms=0.002891 Jy/beam
! Combined flux in latest and established models = 0.452084 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 153 components and 0.452084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=4.317251Jy  sigma=0.001299
! Fit after  self-cal, rms=4.317673Jy  sigma=0.001298
wmodel J1112-2158_S_1997_08_27_yyk\_map.mod
! Writing 153 model components to file: J1112-2158_S_1997_08_27_yyk_map.mod
wobs J1112-2158_S_1997_08_27_yyk\_uvs.fits
! Writing UV FITS file: J1112-2158_S_1997_08_27_yyk_uvs.fits
wwins J1112-2158_S_1997_08_27_yyk\_map.win
! wwins: Wrote 2 windows to J1112-2158_S_1997_08_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00465121 Jy
! Component: 100  -  total flux cleaned = -0.0080743 Jy
! Component: 150  -  total flux cleaned = -0.0107404 Jy
! Component: 200  -  total flux cleaned = -0.0122353 Jy
! Component: 250  -  total flux cleaned = -0.0136465 Jy
! Component: 300  -  total flux cleaned = -0.0150966 Jy
! Component: 350  -  total flux cleaned = -0.0165812 Jy
! Component: 400  -  total flux cleaned = -0.0179979 Jy
! Component: 450  -  total flux cleaned = -0.0194466 Jy
! Component: 500  -  total flux cleaned = -0.0206456 Jy
! Component: 550  -  total flux cleaned = -0.0215331 Jy
! Component: 600  -  total flux cleaned = -0.0224801 Jy
! Component: 650  -  total flux cleaned = -0.0234 Jy
! Component: 700  -  total flux cleaned = -0.0242128 Jy
! Component: 750  -  total flux cleaned = -0.0249245 Jy
! Component: 800  -  total flux cleaned = -0.0257676 Jy
! Component: 850  -  total flux cleaned = -0.0264379 Jy
! Component: 900  -  total flux cleaned = -0.026945 Jy
! Component: 950  -  total flux cleaned = -0.0275088 Jy
! Component: 1000  -  total flux cleaned = -0.0276458 Jy
! Component: 1050  -  total flux cleaned = -0.0279155 Jy
! Component: 1100  -  total flux cleaned = -0.0282447 Jy
! Component: 1150  -  total flux cleaned = -0.0285656 Jy
! Component: 1200  -  total flux cleaned = -0.0286905 Jy
! Component: 1250  -  total flux cleaned = -0.0289377 Jy
! Component: 1300  -  total flux cleaned = -0.0291176 Jy
! Component: 1350  -  total flux cleaned = -0.0292947 Jy
! Component: 1400  -  total flux cleaned = -0.0295249 Jy
! Component: 1450  -  total flux cleaned = -0.0295251 Jy
! Component: 1500  -  total flux cleaned = -0.0298026 Jy
! Component: 1550  -  total flux cleaned = -0.0300199 Jy
! Component: 1600  -  total flux cleaned = -0.0301803 Jy
! Component: 1650  -  total flux cleaned = -0.0306016 Jy
! Component: 1700  -  total flux cleaned = -0.0309641 Jy
! Component: 1750  -  total flux cleaned = -0.0314242 Jy
! Component: 1800  -  total flux cleaned = -0.0317272 Jy
! Component: 1850  -  total flux cleaned = -0.0321756 Jy
! Component: 1900  -  total flux cleaned = -0.032472 Jy
! Component: 1950  -  total flux cleaned = -0.0329587 Jy
! Component: 2000  -  total flux cleaned = -0.033247 Jy
! Total flux subtracted in 2048 components = -0.033721 Jy
! Clean residual min=-0.003031 max=0.002932 Jy/beam
! Clean residual mean=-0.000228 rms=0.001087 Jy/beam
! Combined flux in latest and established models = 0.418363 Jy
keep
! Adding 160 model components to the UV plane model.
! The established model now contains 313 components and 0.418363 Jy
![Exited script file: muppet]
wmap "J1112-2158_S_1997_08_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.051 x 15.76 at -21.82 degrees (North through East)
! Clean map  min=-0.013493  max=0.13945 Jy/beam
! Writing clean map to FITS file: J1112-2158_S_1997_08_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.139453 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00105949 
device "J1112-2158_S_1997_08_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J1112-2158_S_1997_08_27_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.27924 2.27924 4.55849 9.11697 18.2339 36.4679 72.9358
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0031 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.139 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.051 x 15.76 at -21.82 degrees (North through East)
! Clean map  min=-0.013493  max=0.13945 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1112-2158_S_1997_08_27_yyk\_map.gif/gif"
! Attempting to open device: 'J1112-2158_S_1997_08_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1112-2158_S_1997_08_27_yyk_uvs.log closed on Sun Jan  7 17:42:51 2007