! Started logfile: J1112-2158_S_1997_07_02_yyk_uvs.log on Sun Jan 7 17:42:36 2007 obs J1112-2158_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1112-2158_S_1997_07_02_yyk_uva.fits ! AN table 1: 108 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.682099 visibilities/baseline/integration-bin. ! Found source: J1112-2158 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 755 lines of history. ! ! Reading 13260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1112-2158_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.597817 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=10.78 mas, bpa=5.752 degrees ! Estimated noise=2734.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.282536 Jy ! Component: 100 - total flux cleaned = 0.406692 Jy ! Total flux subtracted in 100 components = 0.406692 Jy ! Clean residual min=-0.058672 max=0.125988 Jy/beam ! Clean residual mean=0.002559 rms=0.027751 Jy/beam ! Combined flux in latest and established models = 0.406692 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.406692 Jy ! ! Correcting IF 1. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.474221Jy sigma=0.001802 ! Fit after self-cal, rms=0.472526Jy sigma=0.001797 ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=10.78 mas, bpa=5.752 degrees ! Estimated noise=2734.22 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.34 mas, bmaj=13.3 mas, bpa=6.924 degrees ! Estimated noise=1608.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.107637 Jy ! Component: 100 - total flux cleaned = 0.149907 Jy ! Component: 150 - total flux cleaned = 0.162608 Jy ! Component: 200 - total flux cleaned = 0.163238 Jy ! Total flux subtracted in 200 components = 0.163238 Jy ! Clean residual min=-0.057131 max=0.171136 Jy/beam ! Clean residual mean=0.002433 rms=0.035923 Jy/beam ! Combined flux in latest and established models = 0.56993 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 67 components and 0.56993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.458874Jy sigma=0.001732 ! Fit after self-cal, rms=0.457859Jy sigma=0.001727 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.34 x 13.3 at 6.924 degrees (North through East) ! Clean map min=-0.060661 max=0.30858 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.841425 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.88 HN 0.87 KP 1.52 ! LA 0.85 MK 1.00* NL 1.00* OV 2.69 ! PT 0.64 SC 1.57 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.813138 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.94 HN 0.81 KP 1.64 ! LA 0.91 MK 1.00* NL 1.04 OV 2.77 ! PT 0.66 SC 1.64 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.855094 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.87 HN 0.81 KP 1.64 ! LA 0.71 MK 1.00* NL 0.98 OV 2.51 ! PT 0.74 SC 1.52 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.81578 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.90 HN 0.99 KP 1.75 ! LA 0.80 MK 1.00* NL 1.17 OV 2.59 ! PT 0.66 SC 1.49 ! ! ! Fit before self-cal, rms=0.457859Jy sigma=0.001727 ! Fit after self-cal, rms=0.613315Jy sigma=0.001778 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.613315Jy sigma=0.001778 ! Fit after self-cal, rms=0.615464Jy sigma=0.001772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.102 mas, bmaj=14.97 mas, bpa=-0.5743 degrees ! Estimated noise=1053.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.11976 Jy ! Component: 100 - total flux cleaned = -0.156235 Jy ! Component: 150 - total flux cleaned = -0.169133 Jy ! Component: 200 - total flux cleaned = -0.171 Jy ! Total flux subtracted in 200 components = -0.171 Jy ! Clean residual min=-0.023604 max=0.044520 Jy/beam ! Clean residual mean=0.000209 rms=0.009411 Jy/beam ! Combined flux in latest and established models = 0.39893 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 106 components and 0.39893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.612334Jy sigma=0.001578 ! Fit after self-cal, rms=0.612303Jy sigma=0.001576 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.612303Jy sigma=0.001576 ! Fit after self-cal, rms=0.611760Jy sigma=0.001570 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 28). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345767 Jy ! Component: 100 - total flux cleaned = 0.0312141 Jy ! Component: 150 - total flux cleaned = 0.0283238 Jy ! Component: 200 - total flux cleaned = 0.027478 Jy ! Total flux subtracted in 200 components = 0.027478 Jy ! Clean residual min=-0.022154 max=0.022374 Jy/beam ! Clean residual mean=-0.000203 rms=0.007155 Jy/beam ! Combined flux in latest and established models = 0.426408 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 144 components and 0.426408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.600965Jy sigma=0.001522 ! Fit after self-cal, rms=0.598869Jy sigma=0.001514 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.102 x 14.97 at -0.5743 degrees (North through East) ! Clean map min=-0.022735 max=0.22905 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.598869Jy sigma=0.001514 ! Fit after self-cal, rms=0.464989Jy sigma=0.001493 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.464989Jy sigma=0.001493 ! Fit after self-cal, rms=0.464928Jy sigma=0.001493 ! Inverting map and beam ! Estimated beam: bmin=5.224 mas, bmaj=15.53 mas, bpa=-1.164 degrees ! Estimated noise=1015.07 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.038268 Jy ! Component: 100 - total flux cleaned = 0.0434654 Jy ! Component: 150 - total flux cleaned = 0.0449408 Jy ! Component: 200 - total flux cleaned = 0.0449205 Jy ! Total flux subtracted in 200 components = 0.0449205 Jy ! Clean residual min=-0.024755 max=0.024862 Jy/beam ! Clean residual mean=-0.000633 rms=0.006978 Jy/beam ! Combined flux in latest and established models = 0.471329 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 70 model components to the UV plane model. ! The established model now contains 207 components and 0.471329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.456536Jy sigma=0.001446 ! Fit after self-cal, rms=0.454911Jy sigma=0.001437 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.454911Jy sigma=0.001437 ! Fit after self-cal, rms=0.392426Jy sigma=0.001409 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392426Jy sigma=0.001409 ! Fit after self-cal, rms=0.392417Jy sigma=0.001408 ! Inverting map and beam ! Estimated beam: bmin=5.53 mas, bmaj=15.98 mas, bpa=-0.2946 degrees ! Estimated noise=995.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346316 Jy ! Component: 100 - total flux cleaned = 0.038313 Jy ! Component: 150 - total flux cleaned = 0.0378266 Jy ! Component: 200 - total flux cleaned = 0.037782 Jy ! Total flux subtracted in 200 components = 0.037782 Jy ! Clean residual min=-0.018524 max=0.024386 Jy/beam ! Clean residual mean=-0.000564 rms=0.006714 Jy/beam ! Combined flux in latest and established models = 0.509111 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 74 model components to the UV plane model. ! The established model now contains 264 components and 0.509111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387632Jy sigma=0.001361 ! Fit after self-cal, rms=0.386713Jy sigma=0.001352 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.469 mas, bmaj=21.79 mas, bpa=-6.52 degrees ! Estimated noise=1090.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159525 Jy ! Component: 100 - total flux cleaned = 0.0151007 Jy ! Component: 150 - total flux cleaned = 0.0135836 Jy ! Component: 200 - total flux cleaned = 0.0122972 Jy ! Total flux subtracted in 200 components = 0.0122972 Jy ! Clean residual min=-0.017321 max=0.020326 Jy/beam ! Clean residual mean=-0.000944 rms=0.006330 Jy/beam ! Combined flux in latest and established models = 0.521408 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 305 components and 0.521408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385785Jy sigma=0.001343 ! Fit after self-cal, rms=0.385485Jy sigma=0.001341 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.146 mas, bmaj=11.48 mas, bpa=1.897 degrees ! Estimated noise=1808.86 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.196264 Jy ! Component: 100 - total flux cleaned = 0.303505 Jy ! Component: 150 - total flux cleaned = 0.373706 Jy ! Component: 200 - total flux cleaned = 0.422058 Jy ! Total flux subtracted in 200 components = 0.422058 Jy ! Clean residual min=-0.023335 max=0.032114 Jy/beam ! Clean residual mean=-0.000074 rms=0.007717 Jy/beam ! Combined flux in latest and established models = 0.422058 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 79 model components to the UV plane model. ! The established model now contains 79 components and 0.422058 Jy ! Inverting map and beam ! Estimated beam: bmin=5.53 mas, bmaj=15.98 mas, bpa=-0.2946 degrees ! Estimated noise=995.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0548192 Jy ! Component: 100 - total flux cleaned = 0.0848987 Jy ! Component: 150 - total flux cleaned = 0.096797 Jy ! Component: 200 - total flux cleaned = 0.102497 Jy ! Total flux subtracted in 200 components = 0.102497 Jy ! Clean residual min=-0.017328 max=0.015001 Jy/beam ! Clean residual mean=-0.000636 rms=0.005673 Jy/beam ! Combined flux in latest and established models = 0.524555 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 145 components and 0.524555 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.469 mas, bmaj=21.79 mas, bpa=-6.52 degrees ! Estimated noise=1090.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442673 Jy ! Component: 100 - total flux cleaned = 0.00537747 Jy ! Component: 150 - total flux cleaned = 0.00575147 Jy ! Component: 200 - total flux cleaned = 0.00640995 Jy ! Total flux subtracted in 200 components = 0.00640995 Jy ! Clean residual min=-0.017430 max=0.015765 Jy/beam ! Clean residual mean=-0.000949 rms=0.005756 Jy/beam ! Combined flux in latest and established models = 0.530965 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 178 components and 0.530964 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.53 mas, bmaj=15.98 mas, bpa=-0.2946 degrees ! Estimated noise=995.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448298 Jy ! Component: 100 - total flux cleaned = 0.000721389 Jy ! Component: 150 - total flux cleaned = 0.00072758 Jy ! Component: 200 - total flux cleaned = 0.000307349 Jy ! Total flux subtracted in 200 components = 0.000307349 Jy ! Clean residual min=-0.014326 max=0.014331 Jy/beam ! Clean residual mean=-0.000728 rms=0.004617 Jy/beam ! Combined flux in latest and established models = 0.531272 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 202 components and 0.531272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385200Jy sigma=0.001339 ! Fit after self-cal, rms=0.384719Jy sigma=0.001335 wmodel J1112-2158_S_1997_07_02_yyk\_map.mod ! Writing 202 model components to file: J1112-2158_S_1997_07_02_yyk_map.mod wobs J1112-2158_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1112-2158_S_1997_07_02_yyk_uvs.fits wwins J1112-2158_S_1997_07_02_yyk\_map.win ! wwins: Wrote 2 windows to J1112-2158_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00442989 Jy ! Component: 100 - total flux cleaned = -0.00631144 Jy ! Component: 150 - total flux cleaned = -0.00745982 Jy ! Component: 200 - total flux cleaned = -0.00781488 Jy ! Component: 250 - total flux cleaned = -0.007487 Jy ! Component: 300 - total flux cleaned = -0.00763697 Jy ! Component: 350 - total flux cleaned = -0.00854052 Jy ! Component: 400 - total flux cleaned = -0.00941292 Jy ! Component: 450 - total flux cleaned = -0.00941244 Jy ! Component: 500 - total flux cleaned = -0.00955188 Jy ! Component: 550 - total flux cleaned = -0.00995363 Jy ! Component: 600 - total flux cleaned = -0.0104727 Jy ! Component: 650 - total flux cleaned = -0.0105994 Jy ! Component: 700 - total flux cleaned = -0.0107246 Jy ! Component: 750 - total flux cleaned = -0.0106021 Jy ! Component: 800 - total flux cleaned = -0.0110852 Jy ! Component: 850 - total flux cleaned = -0.0109647 Jy ! Component: 900 - total flux cleaned = -0.011201 Jy ! Component: 950 - total flux cleaned = -0.0115476 Jy ! Component: 1000 - total flux cleaned = -0.0115479 Jy ! Component: 1050 - total flux cleaned = -0.0116609 Jy ! Component: 1100 - total flux cleaned = -0.0119923 Jy ! Component: 1150 - total flux cleaned = -0.0119915 Jy ! Component: 1200 - total flux cleaned = -0.0115617 Jy ! Component: 1250 - total flux cleaned = -0.0113475 Jy ! Component: 1300 - total flux cleaned = -0.0108204 Jy ! Component: 1350 - total flux cleaned = -0.0104031 Jy ! Component: 1400 - total flux cleaned = -0.00977967 Jy ! Component: 1450 - total flux cleaned = -0.00946961 Jy ! Component: 1500 - total flux cleaned = -0.00916039 Jy ! Component: 1550 - total flux cleaned = -0.00885322 Jy ! Component: 1600 - total flux cleaned = -0.00844486 Jy ! Component: 1650 - total flux cleaned = -0.00813948 Jy ! Component: 1700 - total flux cleaned = -0.00793658 Jy ! Component: 1750 - total flux cleaned = -0.00763171 Jy ! Component: 1800 - total flux cleaned = -0.00732929 Jy ! Component: 1850 - total flux cleaned = -0.00712752 Jy ! Component: 1900 - total flux cleaned = -0.00702682 Jy ! Component: 1950 - total flux cleaned = -0.00682634 Jy ! Component: 2000 - total flux cleaned = -0.00692667 Jy ! Total flux subtracted in 2048 components = -0.00692632 Jy ! Clean residual min=-0.006172 max=0.007131 Jy/beam ! Clean residual mean=-0.000387 rms=0.002506 Jy/beam ! Combined flux in latest and established models = 0.524346 Jy keep ! Adding 174 model components to the UV plane model. ! The established model now contains 376 components and 0.524345 Jy ![Exited script file: muppet] wmap "J1112-2158_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.53 x 15.98 at -0.2946 degrees (North through East) ! Clean map min=-0.013619 max=0.20346 Jy/beam ! Writing clean map to FITS file: J1112-2158_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.203458 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00236005 device "J1112-2158_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1112-2158_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.47992 3.47992 6.95984 13.9197 27.8393 55.6787 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.007 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.203 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.53 x 15.98 at -0.2946 degrees (North through East) ! Clean map min=-0.013619 max=0.20346 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1112-2158_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1112-2158_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1112-2158_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 17:42:43 2007