! Started logfile: J1110-1858_S_1997_08_27_yyk_uvs.log on Sun Jan 7 17:41:43 2007 obs J1110-1858_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1110-1858_S_1997_08_27_yyk_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.834742 visibilities/baseline/integration-bin. ! Found source: J1110-1858 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 21336 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1110-1858_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.729721 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=6.36 mas, bpa=-16.75 degrees ! Estimated noise=2517.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.458957 Jy ! Component: 100 - total flux cleaned = 0.58728 Jy ! Total flux subtracted in 100 components = 0.58728 Jy ! Clean residual min=-0.061661 max=0.096250 Jy/beam ! Clean residual mean=-0.000078 rms=0.017112 Jy/beam ! Combined flux in latest and established models = 0.58728 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.58728 Jy ! ! Correcting IF 1. ! A total of 265 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.438192Jy sigma=0.001439 ! Fit after self-cal, rms=0.436416Jy sigma=0.001434 ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=6.36 mas, bpa=-16.75 degrees ! Estimated noise=2517.02 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.553 mas, bmaj=7.7 mas, bpa=-14.77 degrees ! Estimated noise=1407.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -16.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.111367 Jy ! Component: 100 - total flux cleaned = 0.157865 Jy ! Component: 150 - total flux cleaned = 0.174235 Jy ! Component: 200 - total flux cleaned = 0.182517 Jy ! Total flux subtracted in 200 components = 0.182517 Jy ! Clean residual min=-0.028566 max=0.044729 Jy/beam ! Clean residual mean=0.000008 rms=0.009430 Jy/beam ! Combined flux in latest and established models = 0.769797 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 55 components and 0.769797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.412838Jy sigma=0.001355 ! Fit after self-cal, rms=0.411349Jy sigma=0.001350 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.553 x 7.7 at -14.77 degrees (North through East) ! Clean map min=-0.025975 max=0.52425 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01806 ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.08 HN 0.85 KP 0.87 ! LA 0.95 MK 1.04 NL 1.00* OV 1.05 ! PT 0.95 SC 0.84 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983424 ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 1.08 HN 0.97 KP 0.91 ! LA 1.03 MK 1.09 NL 0.93 OV 0.99 ! PT 0.93 SC 0.88 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02571 ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.04 HN 0.91 KP 0.89 ! LA 0.79 MK 0.95 NL 0.90 OV 0.93 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.97472 ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.08 HN 1.12 KP 0.94 ! LA 0.88 MK 1.10 NL 1.00 OV 0.93 ! PT 0.95 SC 1.00 ! ! ! Fit before self-cal, rms=0.411349Jy sigma=0.001350 ! Fit after self-cal, rms=0.397999Jy sigma=0.001319 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397999Jy sigma=0.001319 ! Fit after self-cal, rms=0.397985Jy sigma=0.001319 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.559 mas, bmaj=7.794 mas, bpa=-12.95 degrees ! Estimated noise=1377.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00737423 Jy ! Component: 100 - total flux cleaned = -0.00510117 Jy ! Component: 150 - total flux cleaned = -0.00313079 Jy ! Component: 200 - total flux cleaned = -0.00193943 Jy ! Total flux subtracted in 200 components = -0.00193943 Jy ! Clean residual min=-0.024480 max=0.028107 Jy/beam ! Clean residual mean=-0.000025 rms=0.006735 Jy/beam ! Combined flux in latest and established models = 0.767858 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.767858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395389Jy sigma=0.001311 ! Fit after self-cal, rms=0.395282Jy sigma=0.001310 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395282Jy sigma=0.001310 ! Fit after self-cal, rms=0.390792Jy sigma=0.001295 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000643229 Jy ! Component: 100 - total flux cleaned = 0.000492817 Jy ! Component: 150 - total flux cleaned = 0.000994421 Jy ! Component: 200 - total flux cleaned = 0.00147386 Jy ! Total flux subtracted in 200 components = 0.00147386 Jy ! Clean residual min=-0.024649 max=0.024064 Jy/beam ! Clean residual mean=-0.000035 rms=0.006382 Jy/beam ! Combined flux in latest and established models = 0.769332 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.769332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389509Jy sigma=0.001291 ! Fit after self-cal, rms=0.388820Jy sigma=0.001289 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.559 x 7.794 at -12.95 degrees (North through East) ! Clean map min=-0.03236 max=0.52863 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388820Jy sigma=0.001289 ! Fit after self-cal, rms=3.024549Jy sigma=0.001233 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.024549Jy sigma=0.001233 ! Fit after self-cal, rms=3.025048Jy sigma=0.001233 ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=9.051 mas, bpa=-9.624 degrees ! Estimated noise=1384.12 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663793 Jy ! Component: 100 - total flux cleaned = 0.00659009 Jy ! Component: 150 - total flux cleaned = 0.00657744 Jy ! Component: 200 - total flux cleaned = 0.00710645 Jy ! Total flux subtracted in 200 components = 0.00710645 Jy ! Clean residual min=-0.012489 max=0.011008 Jy/beam ! Clean residual mean=-0.000009 rms=0.003232 Jy/beam ! Combined flux in latest and established models = 0.776438 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 112 components and 0.776438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.024770Jy sigma=0.001226 ! Fit after self-cal, rms=3.024952Jy sigma=0.001226 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.024952Jy sigma=0.001226 ! Fit after self-cal, rms=5.044535Jy sigma=0.001224 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.044535Jy sigma=0.001224 ! Fit after self-cal, rms=5.044573Jy sigma=0.001224 ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=9.064 mas, bpa=-9.528 degrees ! Estimated noise=1380.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274449 Jy ! Component: 100 - total flux cleaned = 0.00320454 Jy ! Component: 150 - total flux cleaned = 0.00361523 Jy ! Component: 200 - total flux cleaned = 0.00398735 Jy ! Total flux subtracted in 200 components = 0.00398735 Jy ! Clean residual min=-0.009639 max=0.009259 Jy/beam ! Clean residual mean=0.000004 rms=0.002577 Jy/beam ! Combined flux in latest and established models = 0.780426 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.780426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.044494Jy sigma=0.001221 ! Fit after self-cal, rms=5.044435Jy sigma=0.001221 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.465 mas, bmaj=15.19 mas, bpa=-8.778 degrees ! Estimated noise=1719.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183049 Jy ! Component: 100 - total flux cleaned = 0.00155444 Jy ! Component: 150 - total flux cleaned = 0.00133609 Jy ! Component: 200 - total flux cleaned = 0.00113747 Jy ! Total flux subtracted in 200 components = 0.00113747 Jy ! Clean residual min=-0.008898 max=0.008311 Jy/beam ! Clean residual mean=0.000009 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.781563 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 148 components and 0.781563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.044428Jy sigma=0.001220 ! Fit after self-cal, rms=5.044192Jy sigma=0.001220 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.498 mas, bpa=-10.81 degrees ! Estimated noise=2787.93 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.48505 Jy ! Component: 100 - total flux cleaned = 0.61155 Jy ! Component: 150 - total flux cleaned = 0.677026 Jy ! Component: 200 - total flux cleaned = 0.715991 Jy ! Total flux subtracted in 200 components = 0.715991 Jy ! Clean residual min=-0.015322 max=0.017289 Jy/beam ! Clean residual mean=-0.000100 rms=0.004366 Jy/beam ! Combined flux in latest and established models = 0.715992 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.715992 Jy ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=9.064 mas, bpa=-9.528 degrees ! Estimated noise=1380.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296867 Jy ! Component: 100 - total flux cleaned = 0.0444108 Jy ! Component: 150 - total flux cleaned = 0.0486185 Jy ! Component: 200 - total flux cleaned = 0.0505886 Jy ! Total flux subtracted in 200 components = 0.0505886 Jy ! Clean residual min=-0.007483 max=0.009203 Jy/beam ! Clean residual mean=-0.000031 rms=0.002324 Jy/beam ! Combined flux in latest and established models = 0.76658 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 88 components and 0.766581 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.465 mas, bmaj=15.19 mas, bpa=-8.778 degrees ! Estimated noise=1719.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00823343 Jy ! Component: 100 - total flux cleaned = 0.00879271 Jy ! Component: 150 - total flux cleaned = 0.00951692 Jy ! Component: 200 - total flux cleaned = 0.010123 Jy ! Total flux subtracted in 200 components = 0.010123 Jy ! Clean residual min=-0.006878 max=0.007605 Jy/beam ! Clean residual mean=-0.000012 rms=0.002247 Jy/beam ! Combined flux in latest and established models = 0.776704 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.776704 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=9.064 mas, bpa=-9.528 degrees ! Estimated noise=1380.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034815 Jy ! Component: 100 - total flux cleaned = -0.000129249 Jy ! Component: 150 - total flux cleaned = -0.000135097 Jy ! Component: 200 - total flux cleaned = -0.000146317 Jy ! Total flux subtracted in 200 components = -0.000146317 Jy ! Clean residual min=-0.007068 max=0.006819 Jy/beam ! Clean residual mean=-0.000012 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 0.776557 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 0.776557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.044490Jy sigma=0.001219 ! Fit after self-cal, rms=5.043559Jy sigma=0.001218 wmodel J1110-1858_S_1997_08_27_yyk\_map.mod ! Writing 123 model components to file: J1110-1858_S_1997_08_27_yyk_map.mod wobs J1110-1858_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1110-1858_S_1997_08_27_yyk_uvs.fits wwins J1110-1858_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J1110-1858_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015439 Jy ! Component: 100 - total flux cleaned = -0.00241228 Jy ! Component: 150 - total flux cleaned = -0.00251059 Jy ! Component: 200 - total flux cleaned = -0.00270178 Jy ! Component: 250 - total flux cleaned = -0.00251839 Jy ! Component: 300 - total flux cleaned = -0.00243575 Jy ! Component: 350 - total flux cleaned = -0.00218922 Jy ! Component: 400 - total flux cleaned = -0.00178982 Jy ! Component: 450 - total flux cleaned = -0.00148108 Jy ! Component: 500 - total flux cleaned = -0.00140709 Jy ! Component: 550 - total flux cleaned = -0.00147811 Jy ! Component: 600 - total flux cleaned = -0.00133588 Jy ! Component: 650 - total flux cleaned = -0.00154366 Jy ! Component: 700 - total flux cleaned = -0.00147579 Jy ! Component: 750 - total flux cleaned = -0.00154279 Jy ! Component: 800 - total flux cleaned = -0.00167181 Jy ! Component: 850 - total flux cleaned = -0.00167135 Jy ! Component: 900 - total flux cleaned = -0.00173372 Jy ! Component: 950 - total flux cleaned = -0.00173207 Jy ! Component: 1000 - total flux cleaned = -0.00167181 Jy ! Component: 1050 - total flux cleaned = -0.00155561 Jy ! Component: 1100 - total flux cleaned = -0.00161337 Jy ! Component: 1150 - total flux cleaned = -0.00161255 Jy ! Component: 1200 - total flux cleaned = -0.00161147 Jy ! Component: 1250 - total flux cleaned = -0.00150098 Jy ! Component: 1300 - total flux cleaned = -0.00144797 Jy ! Component: 1350 - total flux cleaned = -0.00155324 Jy ! Component: 1400 - total flux cleaned = -0.00160422 Jy ! Component: 1450 - total flux cleaned = -0.00155224 Jy ! Component: 1500 - total flux cleaned = -0.00150228 Jy ! Component: 1550 - total flux cleaned = -0.00160116 Jy ! Component: 1600 - total flux cleaned = -0.0016019 Jy ! Component: 1650 - total flux cleaned = -0.00150715 Jy ! Component: 1700 - total flux cleaned = -0.00160126 Jy ! Component: 1750 - total flux cleaned = -0.00164713 Jy ! Component: 1800 - total flux cleaned = -0.00160222 Jy ! Component: 1850 - total flux cleaned = -0.00173736 Jy ! Component: 1900 - total flux cleaned = -0.00195807 Jy ! Component: 1950 - total flux cleaned = -0.0020881 Jy ! Component: 2000 - total flux cleaned = -0.00208759 Jy ! Total flux subtracted in 2048 components = -0.00225727 Jy ! Clean residual min=-0.002354 max=0.002505 Jy/beam ! Clean residual mean=0.000013 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.7743 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 255 components and 0.7743 Jy ![Exited script file: muppet] wmap "J1110-1858_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.497 x 9.064 at -9.528 degrees (North through East) ! Clean map min=-0.0070913 max=0.55155 Jy/beam ! Writing clean map to FITS file: J1110-1858_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.551554 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00086574 device "J1110-1858_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1110-1858_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.470891 0.470891 0.941782 1.88356 3.76713 7.53426 15.0685 30.137 60.274 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.551 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.497 x 9.064 at -9.528 degrees (North through East) ! Clean map min=-0.0070913 max=0.55155 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1110-1858_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1110-1858_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1110-1858_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 17:41:50 2007