! Started logfile: J1104-2431_S_1997_08_27_yyk_uvs.log on Sun Jan 7 17:40:26 2007 obs J1104-2431_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1104-2431_S_1997_08_27_yyk_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.736741 visibilities/baseline/integration-bin. ! Found source: J1104-2431 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 19892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1104-2431_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.711707 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=6.162 mas, bpa=-16.8 degrees ! Estimated noise=3205.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.414298 Jy ! Component: 100 - total flux cleaned = 0.476425 Jy ! Total flux subtracted in 100 components = 0.476425 Jy ! Clean residual min=-0.057853 max=0.069641 Jy/beam ! Clean residual mean=-0.000365 rms=0.016086 Jy/beam ! Combined flux in latest and established models = 0.476425 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.476425 Jy ! ! Correcting IF 1. ! A total of 382 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.452209Jy sigma=0.001356 ! Fit after self-cal, rms=0.451194Jy sigma=0.001353 ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=6.162 mas, bpa=-16.8 degrees ! Estimated noise=3205.08 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=8.032 mas, bpa=-13.64 degrees ! Estimated noise=1597.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.097378 Jy ! Component: 100 - total flux cleaned = 0.117869 Jy ! Component: 150 - total flux cleaned = 0.119593 Jy ! Component: 200 - total flux cleaned = 0.120993 Jy ! Total flux subtracted in 200 components = 0.120993 Jy ! Clean residual min=-0.024840 max=0.024217 Jy/beam ! Clean residual mean=-0.000644 rms=0.006441 Jy/beam ! Combined flux in latest and established models = 0.597419 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.597419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.433358Jy sigma=0.001300 ! Fit after self-cal, rms=0.433213Jy sigma=0.001300 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.44 x 8.032 at -13.64 degrees (North through East) ! Clean map min=-0.023467 max=0.52379 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02706 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 0.88 KP 0.92 ! LA 0.97 MK 0.99 NL 1.00* OV 1.14 ! PT 0.97 SC 0.84 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.983444 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.11 HN 0.97 KP 0.96 ! LA 1.07 MK 1.08 NL 0.96 OV 1.10 ! PT 0.95 SC 0.87 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04266 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.91 KP 0.92 ! LA 0.80 MK 0.89 NL 0.93 OV 1.01 ! PT 1.12 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.99659 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.11 HN 1.09 KP 0.97 ! LA 0.88 MK 0.99 NL 1.03 OV 1.01 ! PT 0.96 SC 0.97 ! ! ! Fit before self-cal, rms=0.433213Jy sigma=0.001300 ! Fit after self-cal, rms=0.413675Jy sigma=0.001286 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.413675Jy sigma=0.001286 ! Fit after self-cal, rms=0.413655Jy sigma=0.001286 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=7.837 mas, bpa=-12.46 degrees ! Estimated noise=1593.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201435 Jy ! Component: 100 - total flux cleaned = 0.0200502 Jy ! Component: 150 - total flux cleaned = 0.0192104 Jy ! Component: 200 - total flux cleaned = 0.0185369 Jy ! Total flux subtracted in 200 components = 0.0185369 Jy ! Clean residual min=-0.020096 max=0.019525 Jy/beam ! Clean residual mean=-0.000579 rms=0.005187 Jy/beam ! Combined flux in latest and established models = 0.615955 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.615955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410085Jy sigma=0.001275 ! Fit after self-cal, rms=0.409869Jy sigma=0.001274 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.409869Jy sigma=0.001274 ! Fit after self-cal, rms=0.405221Jy sigma=0.001259 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664126 Jy ! Component: 100 - total flux cleaned = 0.00666696 Jy ! Component: 150 - total flux cleaned = 0.00667646 Jy ! Component: 200 - total flux cleaned = 0.00620836 Jy ! Total flux subtracted in 200 components = 0.00620836 Jy ! Clean residual min=-0.018327 max=0.016219 Jy/beam ! Clean residual mean=-0.000585 rms=0.004794 Jy/beam ! Combined flux in latest and established models = 0.622164 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.622164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404066Jy sigma=0.001256 ! Fit after self-cal, rms=0.403177Jy sigma=0.001253 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 7.837 at -12.46 degrees (North through East) ! Clean map min=-0.025155 max=0.52978 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403177Jy sigma=0.001253 ! Fit after self-cal, rms=14.202345Jy sigma=0.001213 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.202345Jy sigma=0.001213 ! Fit after self-cal, rms=14.205256Jy sigma=0.001212 ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=8.792 mas, bpa=-10.06 degrees ! Estimated noise=1582.6 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00877801 Jy ! Component: 100 - total flux cleaned = 0.0101923 Jy ! Component: 150 - total flux cleaned = 0.0110867 Jy ! Component: 200 - total flux cleaned = 0.0113516 Jy ! Total flux subtracted in 200 components = 0.0113516 Jy ! Clean residual min=-0.009107 max=0.008937 Jy/beam ! Clean residual mean=-0.000069 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 0.633516 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 81 components and 0.633515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.205346Jy sigma=0.001211 ! Fit after self-cal, rms=14.199452Jy sigma=0.001211 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.199452Jy sigma=0.001211 ! Fit after self-cal, rms=8.661877Jy sigma=0.001209 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.661877Jy sigma=0.001209 ! Fit after self-cal, rms=8.661559Jy sigma=0.001209 ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=8.71 mas, bpa=-9.913 degrees ! Estimated noise=1582.11 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678787 Jy ! Component: 100 - total flux cleaned = 0.00753979 Jy ! Component: 150 - total flux cleaned = 0.00799454 Jy ! Component: 200 - total flux cleaned = 0.00819752 Jy ! Total flux subtracted in 200 components = 0.00819752 Jy ! Clean residual min=-0.007926 max=0.008416 Jy/beam ! Clean residual mean=-0.000031 rms=0.002091 Jy/beam ! Combined flux in latest and established models = 0.641713 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.641713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.661478Jy sigma=0.001208 ! Fit after self-cal, rms=8.661996Jy sigma=0.001208 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.383 mas, bmaj=16.29 mas, bpa=-7.226 degrees ! Estimated noise=2021.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188693 Jy ! Component: 100 - total flux cleaned = -0.000354184 Jy ! Component: 150 - total flux cleaned = -0.00035283 Jy ! Component: 200 - total flux cleaned = -0.000351587 Jy ! Total flux subtracted in 200 components = -0.000351587 Jy ! Clean residual min=-0.006170 max=0.007215 Jy/beam ! Clean residual mean=-0.000069 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 0.641361 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 0.641361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.661978Jy sigma=0.001208 ! Fit after self-cal, rms=8.662082Jy sigma=0.001208 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=6.886 mas, bpa=-10.66 degrees ! Estimated noise=3688.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.469585 Jy ! Component: 100 - total flux cleaned = 0.572355 Jy ! Component: 150 - total flux cleaned = 0.612852 Jy ! Component: 200 - total flux cleaned = 0.628439 Jy ! Total flux subtracted in 200 components = 0.628439 Jy ! Clean residual min=-0.018816 max=0.021224 Jy/beam ! Clean residual mean=-0.000058 rms=0.005536 Jy/beam ! Combined flux in latest and established models = 0.628439 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.628439 Jy ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=8.71 mas, bpa=-9.913 degrees ! Estimated noise=1582.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185417 Jy ! Component: 100 - total flux cleaned = 0.0198382 Jy ! Component: 150 - total flux cleaned = 0.0198878 Jy ! Component: 200 - total flux cleaned = 0.0191382 Jy ! Total flux subtracted in 200 components = 0.0191382 Jy ! Clean residual min=-0.010638 max=0.008093 Jy/beam ! Clean residual mean=-0.000049 rms=0.002498 Jy/beam ! Combined flux in latest and established models = 0.647577 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.647577 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.383 mas, bmaj=16.29 mas, bpa=-7.226 degrees ! Estimated noise=2021.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178994 Jy ! Component: 100 - total flux cleaned = -0.00282796 Jy ! Component: 150 - total flux cleaned = -0.00351025 Jy ! Component: 200 - total flux cleaned = -0.00412641 Jy ! Total flux subtracted in 200 components = -0.00412641 Jy ! Clean residual min=-0.007207 max=0.008068 Jy/beam ! Clean residual mean=-0.000075 rms=0.002369 Jy/beam ! Combined flux in latest and established models = 0.643451 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 73 components and 0.643451 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=8.71 mas, bpa=-9.913 degrees ! Estimated noise=1582.11 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141567 Jy ! Component: 100 - total flux cleaned = -0.000111298 Jy ! Component: 150 - total flux cleaned = -0.000116108 Jy ! Component: 200 - total flux cleaned = -0.000345938 Jy ! Total flux subtracted in 200 components = -0.000345938 Jy ! Clean residual min=-0.008808 max=0.006453 Jy/beam ! Clean residual mean=-0.000032 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.643105 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.643105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=8.662268Jy sigma=0.001209 ! Fit after self-cal, rms=8.662060Jy sigma=0.001208 wmodel J1104-2431_S_1997_08_27_yyk\_map.mod ! Writing 86 model components to file: J1104-2431_S_1997_08_27_yyk_map.mod wobs J1104-2431_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1104-2431_S_1997_08_27_yyk_uvs.fits wwins J1104-2431_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J1104-2431_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00363627 Jy ! Component: 100 - total flux cleaned = -0.00662318 Jy ! Component: 150 - total flux cleaned = -0.0075489 Jy ! Component: 200 - total flux cleaned = -0.00743817 Jy ! Component: 250 - total flux cleaned = -0.00785475 Jy ! Component: 300 - total flux cleaned = -0.00815136 Jy ! Component: 350 - total flux cleaned = -0.00824483 Jy ! Component: 400 - total flux cleaned = -0.00824528 Jy ! Component: 450 - total flux cleaned = -0.00851281 Jy ! Component: 500 - total flux cleaned = -0.00868662 Jy ! Component: 550 - total flux cleaned = -0.00868776 Jy ! Component: 600 - total flux cleaned = -0.0086869 Jy ! Component: 650 - total flux cleaned = -0.00844716 Jy ! Component: 700 - total flux cleaned = -0.00860059 Jy ! Component: 750 - total flux cleaned = -0.00829439 Jy ! Component: 800 - total flux cleaned = -0.00792224 Jy ! Component: 850 - total flux cleaned = -0.00756044 Jy ! Component: 900 - total flux cleaned = -0.00720823 Jy ! Component: 950 - total flux cleaned = -0.00686374 Jy ! Component: 1000 - total flux cleaned = -0.00679583 Jy ! Component: 1050 - total flux cleaned = -0.00666216 Jy ! Component: 1100 - total flux cleaned = -0.00640069 Jy ! Component: 1150 - total flux cleaned = -0.00620568 Jy ! Component: 1200 - total flux cleaned = -0.00589278 Jy ! Component: 1250 - total flux cleaned = -0.00577091 Jy ! Component: 1300 - total flux cleaned = -0.00564955 Jy ! Component: 1350 - total flux cleaned = -0.00541175 Jy ! Component: 1400 - total flux cleaned = -0.00511944 Jy ! Component: 1450 - total flux cleaned = -0.00489048 Jy ! Component: 1500 - total flux cleaned = -0.00460971 Jy ! Component: 1550 - total flux cleaned = -0.00449831 Jy ! Component: 1600 - total flux cleaned = -0.00427892 Jy ! Component: 1650 - total flux cleaned = -0.00390309 Jy ! Component: 1700 - total flux cleaned = -0.0038497 Jy ! Component: 1750 - total flux cleaned = -0.00379622 Jy ! Component: 1800 - total flux cleaned = -0.00338754 Jy ! Component: 1850 - total flux cleaned = -0.00338752 Jy ! Component: 1900 - total flux cleaned = -0.00328802 Jy ! Component: 1950 - total flux cleaned = -0.00319109 Jy ! Component: 2000 - total flux cleaned = -0.00323794 Jy ! Total flux subtracted in 2048 components = -0.00300082 Jy ! Clean residual min=-0.003861 max=0.002675 Jy/beam ! Clean residual mean=0.000013 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.640104 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 222 components and 0.640104 Jy ![Exited script file: muppet] wmap "J1104-2431_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 8.71 at -9.913 degrees (North through East) ! Clean map min=-0.0054746 max=0.54445 Jy/beam ! Writing clean map to FITS file: J1104-2431_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.544451 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000957381 device "J1104-2431_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1104-2431_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.52753 0.52753 1.05506 2.11012 4.22024 8.44049 16.881 33.762 67.5239 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.544 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 8.71 at -9.913 degrees (North through East) ! Clean map min=-0.0054746 max=0.54445 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1104-2431_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1104-2431_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1104-2431_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 17:40:33 2007