! Started logfile: J1059-1134_X_1997_05_07_yyk_uvs.log on Mon Jan 8 05:07:25 2007 obs J1059-1134_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1059-1134_X_1997_05_07_yyk_uva.fits ! AN table 1: 148 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.931532 visibilities/baseline/integration-bin. ! Found source: J1059-1134 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 24816 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1059-1134_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.251741 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7304 mas, bmaj=1.787 mas, bpa=-2.261 degrees ! Estimated noise=1009.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.118604 Jy ! Component: 100 - total flux cleaned = 0.144001 Jy ! Total flux subtracted in 100 components = 0.144001 Jy ! Clean residual min=-0.009508 max=0.012386 Jy/beam ! Clean residual mean=-0.000020 rms=0.002615 Jy/beam ! Combined flux in latest and established models = 0.144001 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.144001 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.208986Jy sigma=0.001249 ! Fit after self-cal, rms=0.205811Jy sigma=0.001239 ! Inverting map and beam ! Estimated beam: bmin=0.7304 mas, bmaj=1.787 mas, bpa=-2.261 degrees ! Estimated noise=1009.93 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8959 mas, bmaj=2.239 mas, bpa=-3.66 degrees ! Estimated noise=676.513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183006 Jy ! Component: 100 - total flux cleaned = 0.0238735 Jy ! Component: 150 - total flux cleaned = 0.0253112 Jy ! Component: 200 - total flux cleaned = 0.025753 Jy ! Total flux subtracted in 200 components = 0.025753 Jy ! Clean residual min=-0.004863 max=0.005238 Jy/beam ! Clean residual mean=0.000000 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.169754 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.169754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205389Jy sigma=0.001231 ! Fit after self-cal, rms=0.205378Jy sigma=0.001231 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8959 x 2.239 at -3.66 degrees (North through East) ! Clean map min=-0.0042165 max=0.14839 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.988283 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.01 KP 0.98 ! LA 0.98 MK 1.06 NL 1.15 OV 1.04 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.999982 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 0.99 KP 1.02 ! LA 1.01 MK 0.96 NL 1.06 OV 0.98 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.990584 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.03 KP 0.98 ! LA 1.02 MK 0.97 NL 1.09 OV 1.00 ! PT 0.97 SC 1.00 ! ! ! Fit before self-cal, rms=0.205378Jy sigma=0.001231 ! Fit after self-cal, rms=0.207145Jy sigma=0.001230 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207145Jy sigma=0.001230 ! Fit after self-cal, rms=0.207135Jy sigma=0.001230 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8988 mas, bmaj=2.243 mas, bpa=-3.765 degrees ! Estimated noise=669.851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011869 Jy ! Component: 100 - total flux cleaned = -0.00131099 Jy ! Component: 150 - total flux cleaned = -0.00131239 Jy ! Component: 200 - total flux cleaned = -0.00131566 Jy ! Total flux subtracted in 200 components = -0.00131566 Jy ! Clean residual min=-0.004249 max=0.004548 Jy/beam ! Clean residual mean=0.000007 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.168438 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.168438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207072Jy sigma=0.001230 ! Fit after self-cal, rms=0.207061Jy sigma=0.001230 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207061Jy sigma=0.001230 ! Fit after self-cal, rms=0.203151Jy sigma=0.001207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, 15.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376068 Jy ! Component: 100 - total flux cleaned = 0.00333825 Jy ! Component: 150 - total flux cleaned = 0.00332361 Jy ! Component: 200 - total flux cleaned = 0.00341341 Jy ! Total flux subtracted in 200 components = 0.00341341 Jy ! Clean residual min=-0.003059 max=0.003376 Jy/beam ! Clean residual mean=0.000005 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.171852 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 47 components and 0.171852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202996Jy sigma=0.001206 ! Fit after self-cal, rms=0.202606Jy sigma=0.001203 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8988 x 2.243 at -3.765 degrees (North through East) ! Clean map min=-0.0028269 max=0.15145 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202606Jy sigma=0.001203 ! Fit after self-cal, rms=0.198553Jy sigma=0.001203 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198553Jy sigma=0.001203 ! Fit after self-cal, rms=0.198501Jy sigma=0.001202 ! Inverting map and beam ! Estimated beam: bmin=0.8801 mas, bmaj=2.215 mas, bpa=-4.865 degrees ! Estimated noise=654.699 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.04954e-05 Jy ! Component: 100 - total flux cleaned = 0.00031933 Jy ! Component: 150 - total flux cleaned = 0.000568096 Jy ! Component: 200 - total flux cleaned = 0.000677384 Jy ! Total flux subtracted in 200 components = 0.000677384 Jy ! Clean residual min=-0.003305 max=0.002845 Jy/beam ! Clean residual mean=0.000009 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.172529 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.172529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198417Jy sigma=0.001202 ! Fit after self-cal, rms=0.198403Jy sigma=0.001202 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198403Jy sigma=0.001202 ! Fit after self-cal, rms=0.197243Jy sigma=0.001202 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197243Jy sigma=0.001202 ! Fit after self-cal, rms=0.197244Jy sigma=0.001202 ! Inverting map and beam ! Estimated beam: bmin=0.8748 mas, bmaj=2.217 mas, bpa=-4.706 degrees ! Estimated noise=646.06 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130477 Jy ! Component: 100 - total flux cleaned = -0.00124458 Jy ! Component: 150 - total flux cleaned = -0.00125 Jy ! Component: 200 - total flux cleaned = -0.00130045 Jy ! Total flux subtracted in 200 components = -0.00130045 Jy ! Clean residual min=-0.003460 max=0.002693 Jy/beam ! Clean residual mean=0.000010 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.171228 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 75 components and 0.171228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197167Jy sigma=0.001202 ! Fit after self-cal, rms=0.197169Jy sigma=0.001202 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=4.138 mas, bpa=-0.2254 degrees ! Estimated noise=849.581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.23324e-05 Jy ! Component: 100 - total flux cleaned = -7.42638e-05 Jy ! Component: 150 - total flux cleaned = -0.000111489 Jy ! Component: 200 - total flux cleaned = -0.000179939 Jy ! Total flux subtracted in 200 components = -0.000179939 Jy ! Clean residual min=-0.003196 max=0.003342 Jy/beam ! Clean residual mean=0.000024 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.171048 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.171048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197165Jy sigma=0.001202 ! Fit after self-cal, rms=0.197168Jy sigma=0.001202 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7231 mas, bmaj=1.779 mas, bpa=-2.97 degrees ! Estimated noise=964.89 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.124187 Jy ! Component: 100 - total flux cleaned = 0.145152 Jy ! Component: 150 - total flux cleaned = 0.154462 Jy ! Component: 200 - total flux cleaned = 0.159259 Jy ! Total flux subtracted in 200 components = 0.159259 Jy ! Clean residual min=-0.005692 max=0.005832 Jy/beam ! Clean residual mean=-0.000013 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.159259 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.159259 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8748 mas, bmaj=2.217 mas, bpa=-4.706 degrees ! Estimated noise=646.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00677446 Jy ! Component: 100 - total flux cleaned = 0.00946945 Jy ! Component: 150 - total flux cleaned = 0.0100833 Jy ! Component: 200 - total flux cleaned = 0.0105823 Jy ! Total flux subtracted in 200 components = 0.0105823 Jy ! Clean residual min=-0.003416 max=0.003028 Jy/beam ! Clean residual mean=0.000009 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.169841 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 64 components and 0.169841 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=4.138 mas, bpa=-0.2254 degrees ! Estimated noise=849.581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00073595 Jy ! Component: 100 - total flux cleaned = 0.000792812 Jy ! Component: 150 - total flux cleaned = 0.000791256 Jy ! Component: 200 - total flux cleaned = 0.000748232 Jy ! Total flux subtracted in 200 components = 0.000748232 Jy ! Clean residual min=-0.003252 max=0.003476 Jy/beam ! Clean residual mean=0.000023 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.170589 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.170589 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8748 mas, bmaj=2.217 mas, bpa=-4.706 degrees ! Estimated noise=646.06 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202098 Jy ! Component: 100 - total flux cleaned = 0.00030929 Jy ! Component: 150 - total flux cleaned = 0.000265083 Jy ! Component: 200 - total flux cleaned = 0.000266867 Jy ! Total flux subtracted in 200 components = 0.000266867 Jy ! Clean residual min=-0.003454 max=0.002788 Jy/beam ! Clean residual mean=0.000010 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.170856 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.170856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197177Jy sigma=0.001202 ! Fit after self-cal, rms=0.197169Jy sigma=0.001202 wmodel J1059-1134_X_1997_05_07_yyk\_map.mod ! Writing 89 model components to file: J1059-1134_X_1997_05_07_yyk_map.mod wobs J1059-1134_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1059-1134_X_1997_05_07_yyk_uvs.fits wwins J1059-1134_X_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J1059-1134_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000781235 Jy ! Component: 100 - total flux cleaned = -0.000830163 Jy ! Component: 150 - total flux cleaned = -0.000970641 Jy ! Component: 200 - total flux cleaned = -0.00141745 Jy ! Component: 250 - total flux cleaned = -0.0018482 Jy ! Component: 300 - total flux cleaned = -0.00239194 Jy ! Component: 350 - total flux cleaned = -0.00304336 Jy ! Component: 400 - total flux cleaned = -0.00363747 Jy ! Component: 450 - total flux cleaned = -0.0040629 Jy ! Component: 500 - total flux cleaned = -0.00451631 Jy ! Component: 550 - total flux cleaned = -0.00492354 Jy ! Component: 600 - total flux cleaned = -0.00535907 Jy ! Component: 650 - total flux cleaned = -0.00575203 Jy ! Component: 700 - total flux cleaned = -0.00617355 Jy ! Component: 750 - total flux cleaned = -0.00645017 Jy ! Component: 800 - total flux cleaned = -0.00679072 Jy ! Component: 850 - total flux cleaned = -0.00709283 Jy ! Component: 900 - total flux cleaned = -0.00742374 Jy ! Component: 950 - total flux cleaned = -0.00771731 Jy ! Component: 1000 - total flux cleaned = -0.00803986 Jy ! Component: 1050 - total flux cleaned = -0.00835837 Jy ! Component: 1100 - total flux cleaned = -0.00861002 Jy ! Component: 1150 - total flux cleaned = -0.00879686 Jy ! Component: 1200 - total flux cleaned = -0.00913556 Jy ! Component: 1250 - total flux cleaned = -0.00928836 Jy ! Component: 1300 - total flux cleaned = -0.00949985 Jy ! Component: 1350 - total flux cleaned = -0.00973884 Jy ! Component: 1400 - total flux cleaned = -0.0100047 Jy ! Component: 1450 - total flux cleaned = -0.0102387 Jy ! Component: 1500 - total flux cleaned = -0.0104128 Jy ! Component: 1550 - total flux cleaned = -0.0106141 Jy ! Component: 1600 - total flux cleaned = -0.0108704 Jy ! Component: 1650 - total flux cleaned = -0.0111243 Jy ! Component: 1700 - total flux cleaned = -0.0114317 Jy ! Component: 1750 - total flux cleaned = -0.011681 Jy ! Component: 1800 - total flux cleaned = -0.0118182 Jy ! Component: 1850 - total flux cleaned = -0.0119825 Jy ! Component: 1900 - total flux cleaned = -0.0123342 Jy ! Component: 1950 - total flux cleaned = -0.0125752 Jy ! Component: 2000 - total flux cleaned = -0.0127081 Jy ! Total flux subtracted in 2048 components = -0.0128929 Jy ! Clean residual min=-0.001578 max=0.001496 Jy/beam ! Clean residual mean=0.000006 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.157963 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 231 components and 0.157963 Jy ![Exited script file: muppet] wmap "J1059-1134_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8748 x 2.217 at -4.706 degrees (North through East) ! Clean map min=-0.0027182 max=0.14639 Jy/beam ! Writing clean map to FITS file: J1059-1134_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.146392 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00051362 device "J1059-1134_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1059-1134_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05256 1.05256 2.10512 4.21024 8.42047 16.8409 33.6819 67.3638 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.146 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8748 x 2.217 at -4.706 degrees (North through East) ! Clean map min=-0.0027182 max=0.14639 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1059-1134_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1059-1134_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1059-1134_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 05:07:35 2007