! Started logfile: J1037-2934_S_1996_01_02_yyk_uvs.log on Sun Jan  7 17:32:30 2007
obs J1037-2934_S_1996_01_02_yyk_uva.fits
! Reading UV FITS file: J1037-2934_S_1996_01_02_yyk_uva.fits
! AN table 1: 53 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.719078 visibilities/baseline/integration-bin.
! Found source: J1037-2934
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 623 lines of history.
! 
! Reading 6860 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1037-2934_S_1996_01_02_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.53732 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.66 mas, bmaj=7.761 mas, bpa=-12.21 degrees
! Estimated noise=3258.02 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.19356 Jy
! Component: 100  -  total flux cleaned = 1.42062 Jy
! Total flux subtracted in 100 components = 1.42062 Jy
! Clean residual min=-0.075958 max=0.112663 Jy/beam
! Clean residual mean=0.000736 rms=0.022634 Jy/beam
! Combined flux in latest and established models = 1.42062 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.42062 Jy
! 
! Correcting IF 1.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.534974Jy  sigma=0.001973
! Fit after  self-cal, rms=0.534619Jy  sigma=0.001971
! Inverting map and beam 
! Estimated beam: bmin=2.66 mas, bmaj=7.761 mas, bpa=-12.21 degrees
! Estimated noise=3258.24 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.547 mas, bmaj=9.681 mas, bpa=-16.17 degrees
! Estimated noise=2131 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0635934 Jy
! Component: 100  -  total flux cleaned = 0.0668267 Jy
! Component: 150  -  total flux cleaned = 0.0667924 Jy
! Component: 200  -  total flux cleaned = 0.0660238 Jy
! Total flux subtracted in 200 components = 0.0660238 Jy
! Clean residual min=-0.068936 max=0.068126 Jy/beam
! Clean residual mean=0.001791 rms=0.020802 Jy/beam
! Combined flux in latest and established models = 1.48664 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 16 components and 1.48664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.524111Jy  sigma=0.001947
! Fit after  self-cal, rms=0.524010Jy  sigma=0.001947
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.547 x 9.681 at -16.17 degrees (North through East)
! Clean map  min=-0.067178  max=1.303 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.0201
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.09     HN        1.20     KP        0.86     
!   LA        1.02     MK        0.99     NL        0.75     OV        1.04     
!   PT        1.00     SC        0.86     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.955186
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.21     HN        1.50     KP        0.87     
!   LA        1.12     MK        1.03     NL        0.79     OV        1.01     
!   PT        0.95     SC        0.92     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02762
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.11     HN        1.14     KP        0.85     
!   LA        0.86     MK        0.91     NL        0.84     OV        0.93     
!   PT        1.11     SC        1.04     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.964022
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.16     HN        1.41     KP        0.91     
!   LA        0.93     MK        1.06     NL        0.90     OV        0.92     
!   PT        1.13     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.524010Jy  sigma=0.001947
! Fit after  self-cal, rms=0.464350Jy  sigma=0.001755
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.464350Jy  sigma=0.001755
! Fit after  self-cal, rms=0.464346Jy  sigma=0.001755
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.58 mas, bmaj=9.442 mas, bpa=-15.5 degrees
! Estimated noise=2048.61 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0372143 Jy
! Component: 100  -  total flux cleaned = -0.045324 Jy
! Component: 150  -  total flux cleaned = -0.0475353 Jy
! Component: 200  -  total flux cleaned = -0.0488651 Jy
! Total flux subtracted in 200 components = -0.0488651 Jy
! Clean residual min=-0.013722 max=0.020741 Jy/beam
! Clean residual mean=0.000133 rms=0.004811 Jy/beam
! Combined flux in latest and established models = 1.43777 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 1.43777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.463203Jy  sigma=0.001746
! Fit after  self-cal, rms=0.463166Jy  sigma=0.001746
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.463166Jy  sigma=0.001746
! Fit after  self-cal, rms=0.461189Jy  sigma=0.001737
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00031111 Jy
! Component: 100  -  total flux cleaned = -0.000603104 Jy
! Component: 150  -  total flux cleaned = -0.000766586 Jy
! Component: 200  -  total flux cleaned = -0.000919751 Jy
! Total flux subtracted in 200 components = -0.000919751 Jy
! Clean residual min=-0.013533 max=0.019462 Jy/beam
! Clean residual mean=0.000124 rms=0.004728 Jy/beam
! Combined flux in latest and established models = 1.43685 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 1.43685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.461089Jy  sigma=0.001737
! Fit after  self-cal, rms=0.460744Jy  sigma=0.001735
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.58 x 9.442 at -15.5 degrees (North through East)
! Clean map  min=-0.013064  max=1.2932 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.460744Jy  sigma=0.001735
! Fit after  self-cal, rms=0.448870Jy  sigma=0.001694
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.448870Jy  sigma=0.001694
! Fit after  self-cal, rms=0.448814Jy  sigma=0.001694
! Inverting map and beam 
! Estimated beam: bmin=3.588 mas, bmaj=9.417 mas, bpa=-15.35 degrees
! Estimated noise=2046.21 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00330539 Jy
! Component: 100  -  total flux cleaned = -0.00395488 Jy
! Component: 150  -  total flux cleaned = -0.00431596 Jy
! Component: 200  -  total flux cleaned = -0.00463726 Jy
! Total flux subtracted in 200 components = -0.00463726 Jy
! Clean residual min=-0.013451 max=0.018744 Jy/beam
! Clean residual mean=0.000122 rms=0.004510 Jy/beam
! Combined flux in latest and established models = 1.43222 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 1.43222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.448661Jy  sigma=0.001693
! Fit after  self-cal, rms=0.448653Jy  sigma=0.001693
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.448653Jy  sigma=0.001693
! Fit after  self-cal, rms=0.448217Jy  sigma=0.001691
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.448217Jy  sigma=0.001691
! Fit after  self-cal, rms=0.448220Jy  sigma=0.001691
! Inverting map and beam 
! Estimated beam: bmin=3.583 mas, bmaj=9.379 mas, bpa=-15.19 degrees
! Estimated noise=2044.67 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00204 Jy
! Component: 100  -  total flux cleaned = -0.00243324 Jy
! Component: 150  -  total flux cleaned = -0.00274535 Jy
! Component: 200  -  total flux cleaned = -0.00316587 Jy
! Total flux subtracted in 200 components = -0.00316587 Jy
! Clean residual min=-0.013525 max=0.018567 Jy/beam
! Clean residual mean=0.000104 rms=0.004390 Jy/beam
! Combined flux in latest and established models = 1.42905 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 47 components and 1.42905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.448098Jy  sigma=0.001691
! Fit after  self-cal, rms=0.448096Jy  sigma=0.001691
! Inverting map 
! Added new window around map position (11.5, -13.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219714 Jy
! Component: 100  -  total flux cleaned = 0.0300505 Jy
! Component: 150  -  total flux cleaned = 0.031455 Jy
! Component: 200  -  total flux cleaned = 0.0316594 Jy
! Total flux subtracted in 200 components = 0.0316594 Jy
! Clean residual min=-0.010409 max=0.013210 Jy/beam
! Clean residual mean=0.000106 rms=0.003284 Jy/beam
! Combined flux in latest and established models = 1.46071 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 71 components and 1.46071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.447355Jy  sigma=0.001688
! Fit after  self-cal, rms=0.447334Jy  sigma=0.001687
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.859 mas, bmaj=24.11 mas, bpa=-9.965 degrees
! Estimated noise=2490.59 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000604102 Jy
! Component: 100  -  total flux cleaned = 0.000241757 Jy
! Component: 150  -  total flux cleaned = 0.000143735 Jy
! Component: 200  -  total flux cleaned = 4.57493e-05 Jy
! Total flux subtracted in 200 components = 4.57493e-05 Jy
! Clean residual min=-0.008573 max=0.013742 Jy/beam
! Clean residual mean=0.000124 rms=0.003331 Jy/beam
! Combined flux in latest and established models = 1.46076 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 97 components and 1.46076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.447316Jy  sigma=0.001687
! Fit after  self-cal, rms=0.447318Jy  sigma=0.001687
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.67 mas, bmaj=7.549 mas, bpa=-11.6 degrees
! Estimated noise=3182.87 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.16602 Jy
! Component: 100  -  total flux cleaned = 1.33834 Jy
! Component: 150  -  total flux cleaned = 1.40166 Jy
! Component: 200  -  total flux cleaned = 1.42923 Jy
! Total flux subtracted in 200 components = 1.42923 Jy
! Clean residual min=-0.021536 max=0.022536 Jy/beam
! Clean residual mean=0.000045 rms=0.005896 Jy/beam
! Combined flux in latest and established models = 1.42923 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 1.42923 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.583 mas, bmaj=9.379 mas, bpa=-15.19 degrees
! Estimated noise=2044.67 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.018414 Jy
! Component: 100  -  total flux cleaned = 0.0229433 Jy
! Component: 150  -  total flux cleaned = 0.0245651 Jy
! Component: 200  -  total flux cleaned = 0.0256269 Jy
! Total flux subtracted in 200 components = 0.0256269 Jy
! Clean residual min=-0.011919 max=0.011945 Jy/beam
! Clean residual mean=0.000053 rms=0.003360 Jy/beam
! Combined flux in latest and established models = 1.45485 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 34 components and 1.45485 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.859 mas, bmaj=24.11 mas, bpa=-9.965 degrees
! Estimated noise=2490.59 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187857 Jy
! Component: 100  -  total flux cleaned = 0.00233334 Jy
! Component: 150  -  total flux cleaned = 0.00256633 Jy
! Component: 200  -  total flux cleaned = 0.00278251 Jy
! Total flux subtracted in 200 components = 0.00278251 Jy
! Clean residual min=-0.008563 max=0.013334 Jy/beam
! Clean residual mean=0.000072 rms=0.003240 Jy/beam
! Combined flux in latest and established models = 1.45763 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 60 components and 1.45763 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.583 mas, bmaj=9.379 mas, bpa=-15.19 degrees
! Estimated noise=2044.67 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.02172e-05 Jy
! Component: 100  -  total flux cleaned = 1.41829e-05 Jy
! Component: 150  -  total flux cleaned = -0.000465599 Jy
! Component: 200  -  total flux cleaned = -0.000689309 Jy
! Total flux subtracted in 200 components = -0.000689309 Jy
! Clean residual min=-0.011024 max=0.012230 Jy/beam
! Clean residual mean=0.000051 rms=0.003133 Jy/beam
! Combined flux in latest and established models = 1.45695 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 77 components and 1.45695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.447482Jy  sigma=0.001688
! Fit after  self-cal, rms=0.447445Jy  sigma=0.001687
wmodel J1037-2934_S_1996_01_02_yyk\_map.mod
! Writing 77 model components to file: J1037-2934_S_1996_01_02_yyk_map.mod
wobs J1037-2934_S_1996_01_02_yyk\_uvs.fits
! Writing UV FITS file: J1037-2934_S_1996_01_02_yyk_uvs.fits
wwins J1037-2934_S_1996_01_02_yyk\_map.win
! wwins: Wrote 2 windows to J1037-2934_S_1996_01_02_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158932 Jy
! Component: 100  -  total flux cleaned = 0.00303587 Jy
! Component: 150  -  total flux cleaned = 0.00387645 Jy
! Component: 200  -  total flux cleaned = 0.00483798 Jy
! Component: 250  -  total flux cleaned = 0.00560658 Jy
! Component: 300  -  total flux cleaned = 0.00589764 Jy
! Component: 350  -  total flux cleaned = 0.00617714 Jy
! Component: 400  -  total flux cleaned = 0.00671767 Jy
! Component: 450  -  total flux cleaned = 0.00710991 Jy
! Component: 500  -  total flux cleaned = 0.00773826 Jy
! Component: 550  -  total flux cleaned = 0.00798028 Jy
! Component: 600  -  total flux cleaned = 0.00844972 Jy
! Component: 650  -  total flux cleaned = 0.00867498 Jy
! Component: 700  -  total flux cleaned = 0.00856607 Jy
! Component: 750  -  total flux cleaned = 0.00824686 Jy
! Component: 800  -  total flux cleaned = 0.00814292 Jy
! Component: 850  -  total flux cleaned = 0.00814628 Jy
! Component: 900  -  total flux cleaned = 0.00824691 Jy
! Component: 950  -  total flux cleaned = 0.00824701 Jy
! Component: 1000  -  total flux cleaned = 0.00824756 Jy
! Component: 1050  -  total flux cleaned = 0.00833918 Jy
! Component: 1100  -  total flux cleaned = 0.00842934 Jy
! Component: 1150  -  total flux cleaned = 0.00860674 Jy
! Component: 1200  -  total flux cleaned = 0.00878146 Jy
! Component: 1250  -  total flux cleaned = 0.0088649 Jy
! Component: 1300  -  total flux cleaned = 0.00869636 Jy
! Component: 1350  -  total flux cleaned = 0.00869714 Jy
! Component: 1400  -  total flux cleaned = 0.00893962 Jy
! Component: 1450  -  total flux cleaned = 0.00877899 Jy
! Component: 1500  -  total flux cleaned = 0.00893681 Jy
! Component: 1550  -  total flux cleaned = 0.00878255 Jy
! Component: 1600  -  total flux cleaned = 0.00870658 Jy
! Component: 1650  -  total flux cleaned = 0.00908066 Jy
! Component: 1700  -  total flux cleaned = 0.00893302 Jy
! Component: 1750  -  total flux cleaned = 0.00900402 Jy
! Component: 1800  -  total flux cleaned = 0.00893114 Jy
! Component: 1850  -  total flux cleaned = 0.00900095 Jy
! Component: 1900  -  total flux cleaned = 0.00893115 Jy
! Component: 1950  -  total flux cleaned = 0.00879323 Jy
! Component: 2000  -  total flux cleaned = 0.00872571 Jy
! Total flux subtracted in 2048 components = 0.00859437 Jy
! Clean residual min=-0.004609 max=0.003863 Jy/beam
! Clean residual mean=0.000015 rms=0.001338 Jy/beam
! Combined flux in latest and established models = 1.46554 Jy
keep
! Adding 114 model components to the UV plane model.
! The established model now contains 191 components and 1.46554 Jy
![Exited script file: muppet]
wmap "J1037-2934_S_1996_01_02_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.583 x 9.379 at -15.19 degrees (North through East)
! Clean map  min=-0.0084187  max=1.3067 Jy/beam
! Writing clean map to FITS file: J1037-2934_S_1996_01_02_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.30668 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00131112 
device "J1037-2934_S_1996_01_02_yyk\_map.eps/VPS"
! Attempting to open device: 'J1037-2934_S_1996_01_02_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.301018 0.301018 0.602036 1.20407 2.40815 4.81629 9.63258 19.2652 38.5303 77.0606
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0039 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.306 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.583 x 9.379 at -15.19 degrees (North through East)
! Clean map  min=-0.0084187  max=1.3067 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1037-2934_S_1996_01_02_yyk\_map.gif/gif"
! Attempting to open device: 'J1037-2934_S_1996_01_02_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1037-2934_S_1996_01_02_yyk_uvs.log closed on Sun Jan  7 17:32:36 2007