! Started logfile: J1035-2011_X_1997_07_02_yyk_uvs.log on Mon Jan 8 04:53:20 2007 obs J1035-2011_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1035-2011_X_1997_07_02_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.705327 visibilities/baseline/integration-bin. ! Found source: J1035-2011 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 18536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1035-2011_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.02452 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7263 mas, bmaj=2.021 mas, bpa=-7.411 degrees ! Estimated noise=1519.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.83381 Jy ! Component: 100 - total flux cleaned = 0.954649 Jy ! Total flux subtracted in 100 components = 0.954649 Jy ! Clean residual min=-0.028181 max=0.039987 Jy/beam ! Clean residual mean=-0.000254 rms=0.007380 Jy/beam ! Combined flux in latest and established models = 0.954649 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.954649 Jy ! ! Correcting IF 1. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.315502Jy sigma=0.001874 ! Fit after self-cal, rms=0.314856Jy sigma=0.001870 ! Inverting map and beam ! Estimated beam: bmin=0.7263 mas, bmaj=2.021 mas, bpa=-7.411 degrees ! Estimated noise=1519.59 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9017 mas, bmaj=2.419 mas, bpa=-7.187 degrees ! Estimated noise=851.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0759055 Jy ! Component: 100 - total flux cleaned = 0.111438 Jy ! Component: 150 - total flux cleaned = 0.126348 Jy ! Component: 200 - total flux cleaned = 0.127484 Jy ! Total flux subtracted in 200 components = 0.127484 Jy ! Clean residual min=-0.023722 max=0.021949 Jy/beam ! Clean residual mean=-0.000079 rms=0.005828 Jy/beam ! Combined flux in latest and established models = 1.08213 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 33 components and 1.08213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302979Jy sigma=0.001790 ! Fit after self-cal, rms=0.302455Jy sigma=0.001787 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9017 x 2.419 at -7.187 degrees (North through East) ! Clean map min=-0.022379 max=0.95725 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00529 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.07 HN 0.99 KP 0.99 ! LA 1.00 MK 1.02 NL 1.03 OV 0.98 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01285 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.96 KP 0.98 ! LA 0.98 MK 1.00 NL 1.02 OV 1.05 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00666 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.08 HN 1.00 KP 0.96 ! LA 0.98 MK 1.00 NL 1.01 OV 0.97 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00398 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 1.01 KP 0.96 ! LA 0.99 MK 0.98 NL 1.02 OV 0.99 ! PT 0.96 SC 1.00 ! ! ! Fit before self-cal, rms=0.302455Jy sigma=0.001787 ! Fit after self-cal, rms=0.301452Jy sigma=0.001766 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301452Jy sigma=0.001766 ! Fit after self-cal, rms=0.301448Jy sigma=0.001766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9005 mas, bmaj=2.41 mas, bpa=-6.915 degrees ! Estimated noise=857.381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118502 Jy ! Component: 100 - total flux cleaned = 0.0166396 Jy ! Component: 150 - total flux cleaned = 0.018372 Jy ! Component: 200 - total flux cleaned = 0.018666 Jy ! Total flux subtracted in 200 components = 0.018666 Jy ! Clean residual min=-0.017818 max=0.015866 Jy/beam ! Clean residual mean=0.000086 rms=0.004242 Jy/beam ! Combined flux in latest and established models = 1.1008 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 1.1008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300634Jy sigma=0.001760 ! Fit after self-cal, rms=0.300559Jy sigma=0.001759 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300559Jy sigma=0.001759 ! Fit after self-cal, rms=0.239469Jy sigma=0.001411 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151696 Jy ! Component: 100 - total flux cleaned = 0.0173634 Jy ! Component: 150 - total flux cleaned = 0.0179025 Jy ! Component: 200 - total flux cleaned = 0.0183472 Jy ! Total flux subtracted in 200 components = 0.0183472 Jy ! Clean residual min=-0.013992 max=0.013291 Jy/beam ! Clean residual mean=0.000114 rms=0.003750 Jy/beam ! Combined flux in latest and established models = 1.11915 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 1.11915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238633Jy sigma=0.001404 ! Fit after self-cal, rms=0.232337Jy sigma=0.001367 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9005 x 2.41 at -6.915 degrees (North through East) ! Clean map min=-0.012687 max=0.98315 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232337Jy sigma=0.001367 ! Fit after self-cal, rms=0.230770Jy sigma=0.001350 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230770Jy sigma=0.001350 ! Fit after self-cal, rms=0.229129Jy sigma=0.001341 ! Inverting map and beam ! Estimated beam: bmin=0.9032 mas, bmaj=2.415 mas, bpa=-6.832 degrees ! Estimated noise=853.269 mJy/beam. ! Added new window around map position (-3.2, -6.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142801 Jy ! Component: 100 - total flux cleaned = 0.0217137 Jy ! Component: 150 - total flux cleaned = 0.0252814 Jy ! Component: 200 - total flux cleaned = 0.0268864 Jy ! Total flux subtracted in 200 components = 0.0268864 Jy ! Clean residual min=-0.004995 max=0.005675 Jy/beam ! Clean residual mean=0.000057 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 1.14603 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 96 components and 1.14603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228389Jy sigma=0.001336 ! Fit after self-cal, rms=0.227556Jy sigma=0.001331 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227556Jy sigma=0.001331 ! Fit after self-cal, rms=0.227390Jy sigma=0.001328 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227390Jy sigma=0.001328 ! Fit after self-cal, rms=0.226925Jy sigma=0.001325 ! Inverting map and beam ! Estimated beam: bmin=0.9033 mas, bmaj=2.414 mas, bpa=-6.824 degrees ! Estimated noise=852.339 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412251 Jy ! Component: 100 - total flux cleaned = 0.00649671 Jy ! Component: 150 - total flux cleaned = 0.0073225 Jy ! Component: 200 - total flux cleaned = 0.00743614 Jy ! Total flux subtracted in 200 components = 0.00743614 Jy ! Clean residual min=-0.004078 max=0.005078 Jy/beam ! Clean residual mean=0.000051 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 1.15347 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 110 components and 1.15347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226773Jy sigma=0.001324 ! Fit after self-cal, rms=0.226451Jy sigma=0.001323 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.064 mas, bmaj=4.324 mas, bpa=-7.582 degrees ! Estimated noise=1094.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179266 Jy ! Component: 100 - total flux cleaned = 0.0021554 Jy ! Component: 150 - total flux cleaned = 0.00214806 Jy ! Component: 200 - total flux cleaned = 0.00214211 Jy ! Total flux subtracted in 200 components = 0.00214211 Jy ! Clean residual min=-0.004742 max=0.008165 Jy/beam ! Clean residual mean=0.000130 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 1.15561 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 130 components and 1.15561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226412Jy sigma=0.001322 ! Fit after self-cal, rms=0.226191Jy sigma=0.001321 ! Inverting map ! Added new window around map position (-8.2, -16.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00939341 Jy ! Component: 100 - total flux cleaned = 0.0141734 Jy ! Component: 150 - total flux cleaned = 0.0180789 Jy ! Component: 200 - total flux cleaned = 0.0212015 Jy ! Total flux subtracted in 200 components = 0.0212015 Jy ! Clean residual min=-0.003738 max=0.003524 Jy/beam ! Clean residual mean=0.000077 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 1.17681 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 65 model components to the UV plane model. ! The established model now contains 192 components and 1.17681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225957Jy sigma=0.001320 ! Fit after self-cal, rms=0.225806Jy sigma=0.001319 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7277 mas, bmaj=2.02 mas, bpa=-7.227 degrees ! Estimated noise=1522.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.847773 Jy ! Component: 100 - total flux cleaned = 0.973613 Jy ! Component: 150 - total flux cleaned = 1.0283 Jy ! Component: 200 - total flux cleaned = 1.06219 Jy ! Total flux subtracted in 200 components = 1.06219 Jy ! Clean residual min=-0.010812 max=0.014560 Jy/beam ! Clean residual mean=-0.000094 rms=0.003079 Jy/beam ! Combined flux in latest and established models = 1.06219 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.06219 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9033 mas, bmaj=2.414 mas, bpa=-6.824 degrees ! Estimated noise=852.339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356902 Jy ! Component: 100 - total flux cleaned = 0.0562559 Jy ! Component: 150 - total flux cleaned = 0.0699775 Jy ! Component: 200 - total flux cleaned = 0.0799636 Jy ! Total flux subtracted in 200 components = 0.0799636 Jy ! Clean residual min=-0.005645 max=0.005299 Jy/beam ! Clean residual mean=0.000032 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 1.14215 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 66 components and 1.14215 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.064 mas, bmaj=4.324 mas, bpa=-7.582 degrees ! Estimated noise=1094.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125493 Jy ! Component: 100 - total flux cleaned = 0.0207315 Jy ! Component: 150 - total flux cleaned = 0.0268098 Jy ! Component: 200 - total flux cleaned = 0.0318047 Jy ! Total flux subtracted in 200 components = 0.0318047 Jy ! Clean residual min=-0.004710 max=0.004569 Jy/beam ! Clean residual mean=0.000104 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 1.17396 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 125 components and 1.17396 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9033 mas, bmaj=2.414 mas, bpa=-6.824 degrees ! Estimated noise=852.339 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461299 Jy ! Component: 100 - total flux cleaned = 0.00747775 Jy ! Component: 150 - total flux cleaned = 0.00957789 Jy ! Component: 200 - total flux cleaned = 0.0112326 Jy ! Total flux subtracted in 200 components = 0.0112326 Jy ! Clean residual min=-0.003280 max=0.002931 Jy/beam ! Clean residual mean=0.000045 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 1.18519 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 174 components and 1.18519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225816Jy sigma=0.001319 ! Fit after self-cal, rms=0.225696Jy sigma=0.001318 wmodel J1035-2011_X_1997_07_02_yyk\_map.mod ! Writing 174 model components to file: J1035-2011_X_1997_07_02_yyk_map.mod wobs J1035-2011_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1035-2011_X_1997_07_02_yyk_uvs.fits wwins J1035-2011_X_1997_07_02_yyk\_map.win ! wwins: Wrote 4 windows to J1035-2011_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104322 Jy ! Component: 100 - total flux cleaned = -0.00197373 Jy ! Component: 150 - total flux cleaned = -0.00265484 Jy ! Component: 200 - total flux cleaned = -0.00311786 Jy ! Component: 250 - total flux cleaned = -0.00351701 Jy ! Component: 300 - total flux cleaned = -0.0037716 Jy ! Component: 350 - total flux cleaned = -0.00414145 Jy ! Component: 400 - total flux cleaned = -0.00433943 Jy ! Component: 450 - total flux cleaned = -0.00449295 Jy ! Component: 500 - total flux cleaned = -0.00453095 Jy ! Component: 550 - total flux cleaned = -0.00460492 Jy ! Component: 600 - total flux cleaned = -0.0047473 Jy ! Component: 650 - total flux cleaned = -0.00488602 Jy ! Component: 700 - total flux cleaned = -0.00485187 Jy ! Component: 750 - total flux cleaned = -0.00495111 Jy ! Component: 800 - total flux cleaned = -0.00495137 Jy ! Component: 850 - total flux cleaned = -0.00507834 Jy ! Component: 900 - total flux cleaned = -0.00517138 Jy ! Component: 950 - total flux cleaned = -0.00529289 Jy ! Component: 1000 - total flux cleaned = -0.00529261 Jy ! Component: 1050 - total flux cleaned = -0.00532191 Jy ! Component: 1100 - total flux cleaned = -0.00537966 Jy ! Component: 1150 - total flux cleaned = -0.00540806 Jy ! Component: 1200 - total flux cleaned = -0.00540793 Jy ! Component: 1250 - total flux cleaned = -0.00543536 Jy ! Component: 1300 - total flux cleaned = -0.00540849 Jy ! Component: 1350 - total flux cleaned = -0.00546137 Jy ! Component: 1400 - total flux cleaned = -0.00538361 Jy ! Component: 1450 - total flux cleaned = -0.00548625 Jy ! Component: 1500 - total flux cleaned = -0.00551162 Jy ! Component: 1550 - total flux cleaned = -0.005586 Jy ! Component: 1600 - total flux cleaned = -0.00558584 Jy ! Component: 1650 - total flux cleaned = -0.0055615 Jy ! Component: 1700 - total flux cleaned = -0.00546673 Jy ! Component: 1750 - total flux cleaned = -0.00549083 Jy ! Component: 1800 - total flux cleaned = -0.00546772 Jy ! Component: 1850 - total flux cleaned = -0.00537625 Jy ! Component: 1900 - total flux cleaned = -0.00533163 Jy ! Component: 1950 - total flux cleaned = -0.00533178 Jy ! Component: 2000 - total flux cleaned = -0.00526582 Jy ! Total flux subtracted in 2048 components = -0.0052441 Jy ! Clean residual min=-0.001374 max=0.001603 Jy/beam ! Clean residual mean=0.000024 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 1.17995 Jy keep ! Adding 155 model components to the UV plane model. ! The established model now contains 329 components and 1.17995 Jy ![Exited script file: muppet] wmap "J1035-2011_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9033 x 2.414 at -6.824 degrees (North through East) ! Clean map min=-0.0024877 max=0.98012 Jy/beam ! Writing clean map to FITS file: J1035-2011_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.980117 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000435298 device "J1035-2011_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1035-2011_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.133239 0.133239 0.266477 0.532955 1.06591 2.13182 4.26364 8.52728 17.0546 34.1091 68.2182 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.98 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9033 x 2.414 at -6.824 degrees (North through East) ! Clean map min=-0.0024877 max=0.98012 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1035-2011_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1035-2011_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1035-2011_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 04:53:31 2007