! Started logfile: J1035-2011_S_1997_08_27_yyk_uvs.log on Sun Jan 7 17:31:13 2007 obs J1035-2011_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1035-2011_S_1997_08_27_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.786243 visibilities/baseline/integration-bin. ! Found source: J1035-2011 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 20804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1035-2011_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.636512 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=6.528 mas, bpa=-14.08 degrees ! Estimated noise=2566.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.367362 Jy ! Component: 100 - total flux cleaned = 0.473208 Jy ! Total flux subtracted in 100 components = 0.473208 Jy ! Clean residual min=-0.044292 max=0.056532 Jy/beam ! Clean residual mean=0.000097 rms=0.013342 Jy/beam ! Combined flux in latest and established models = 0.473208 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.473208 Jy ! ! Correcting IF 1. ! A total of 323 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.412238Jy sigma=0.001348 ! Fit after self-cal, rms=0.410115Jy sigma=0.001342 ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=6.528 mas, bpa=-14.08 degrees ! Estimated noise=2566.55 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=8.26 mas, bpa=-11.79 degrees ! Estimated noise=1416.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0940898 Jy ! Component: 100 - total flux cleaned = 0.129553 Jy ! Component: 150 - total flux cleaned = 0.145863 Jy ! Component: 200 - total flux cleaned = 0.148953 Jy ! Total flux subtracted in 200 components = 0.148953 Jy ! Clean residual min=-0.018692 max=0.037358 Jy/beam ! Clean residual mean=0.000441 rms=0.006920 Jy/beam ! Combined flux in latest and established models = 0.62216 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 40 components and 0.622161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396286Jy sigma=0.001287 ! Fit after self-cal, rms=0.396178Jy sigma=0.001286 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 8.26 at -11.79 degrees (North through East) ! Clean map min=-0.01762 max=0.43927 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03026 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.86 KP 0.94 ! LA 0.99 MK 0.99 NL 1.00* OV 1.03 ! PT 0.92 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.975492 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.09 HN 0.97 KP 0.95 ! LA 1.07 MK 1.10 NL 1.07 OV 1.00 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02832 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.91 KP 0.94 ! LA 0.82 MK 0.92 NL 1.04 OV 0.92 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.974535 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.07 HN 1.10 KP 0.99 ! LA 0.90 MK 1.16 NL 1.14 OV 0.91 ! PT 0.89 SC 1.02 ! ! ! Fit before self-cal, rms=0.396178Jy sigma=0.001286 ! Fit after self-cal, rms=0.385435Jy sigma=0.001274 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385435Jy sigma=0.001274 ! Fit after self-cal, rms=0.385434Jy sigma=0.001274 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=8.393 mas, bpa=-10.54 degrees ! Estimated noise=1406.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, -13.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.038035 Jy ! Component: 100 - total flux cleaned = 0.0421035 Jy ! Component: 150 - total flux cleaned = 0.0420939 Jy ! Component: 200 - total flux cleaned = 0.0416087 Jy ! Total flux subtracted in 200 components = 0.0416087 Jy ! Clean residual min=-0.015849 max=0.022784 Jy/beam ! Clean residual mean=0.000181 rms=0.004499 Jy/beam ! Combined flux in latest and established models = 0.663769 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 65 components and 0.663769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382203Jy sigma=0.001262 ! Fit after self-cal, rms=0.381763Jy sigma=0.001261 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.381763Jy sigma=0.001261 ! Fit after self-cal, rms=0.378094Jy sigma=0.001247 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17, -25). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227739 Jy ! Component: 100 - total flux cleaned = 0.0300792 Jy ! Component: 150 - total flux cleaned = 0.0320761 Jy ! Component: 200 - total flux cleaned = 0.0327898 Jy ! Total flux subtracted in 200 components = 0.0327898 Jy ! Clean residual min=-0.014285 max=0.015765 Jy/beam ! Clean residual mean=0.000038 rms=0.003543 Jy/beam ! Combined flux in latest and established models = 0.696559 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 99 components and 0.696559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376825Jy sigma=0.001243 ! Fit after self-cal, rms=0.376085Jy sigma=0.001241 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.522 x 8.393 at -10.54 degrees (North through East) ! Clean map min=-0.012696 max=0.44308 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376085Jy sigma=0.001241 ! Fit after self-cal, rms=2.231382Jy sigma=0.001216 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.231382Jy sigma=0.001216 ! Fit after self-cal, rms=2.232044Jy sigma=0.001215 ! Inverting map and beam ! Estimated beam: bmin=3.407 mas, bmaj=8.95 mas, bpa=-8.863 degrees ! Estimated noise=1384.42 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088267 Jy ! Component: 100 - total flux cleaned = 0.00918638 Jy ! Component: 150 - total flux cleaned = 0.00918496 Jy ! Component: 200 - total flux cleaned = 0.00941394 Jy ! Total flux subtracted in 200 components = 0.00941394 Jy ! Clean residual min=-0.008487 max=0.007301 Jy/beam ! Clean residual mean=0.000030 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 0.705973 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.705973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.232004Jy sigma=0.001214 ! Fit after self-cal, rms=2.231241Jy sigma=0.001213 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.231241Jy sigma=0.001213 ! Fit after self-cal, rms=2.000899Jy sigma=0.001212 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.000899Jy sigma=0.001212 ! Fit after self-cal, rms=2.001007Jy sigma=0.001212 ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=8.934 mas, bpa=-8.696 degrees ! Estimated noise=1382.52 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039638 Jy ! Component: 100 - total flux cleaned = 0.00416041 Jy ! Component: 150 - total flux cleaned = 0.00398396 Jy ! Component: 200 - total flux cleaned = 0.00382386 Jy ! Total flux subtracted in 200 components = 0.00382386 Jy ! Clean residual min=-0.007644 max=0.006150 Jy/beam ! Clean residual mean=0.000033 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.709797 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 137 components and 0.709797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.000960Jy sigma=0.001211 ! Fit after self-cal, rms=2.000765Jy sigma=0.001211 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.498 mas, bmaj=15.42 mas, bpa=-7.231 degrees ! Estimated noise=1743.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176378 Jy ! Component: 100 - total flux cleaned = -0.00102805 Jy ! Component: 150 - total flux cleaned = -0.00133346 Jy ! Component: 200 - total flux cleaned = -0.00151706 Jy ! Total flux subtracted in 200 components = -0.00151706 Jy ! Clean residual min=-0.006147 max=0.005683 Jy/beam ! Clean residual mean=0.000075 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.70828 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 153 components and 0.70828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.000739Jy sigma=0.001211 ! Fit after self-cal, rms=2.000644Jy sigma=0.001211 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.209 mas, bpa=-9.253 degrees ! Estimated noise=2873.45 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.407365 Jy ! Component: 100 - total flux cleaned = 0.518721 Jy ! Component: 150 - total flux cleaned = 0.578138 Jy ! Component: 200 - total flux cleaned = 0.616223 Jy ! Total flux subtracted in 200 components = 0.616223 Jy ! Clean residual min=-0.017283 max=0.016508 Jy/beam ! Clean residual mean=0.000086 rms=0.004780 Jy/beam ! Combined flux in latest and established models = 0.616223 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.616223 Jy ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=8.934 mas, bpa=-8.696 degrees ! Estimated noise=1382.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336624 Jy ! Component: 100 - total flux cleaned = 0.0529364 Jy ! Component: 150 - total flux cleaned = 0.0659827 Jy ! Component: 200 - total flux cleaned = 0.0753521 Jy ! Total flux subtracted in 200 components = 0.0753521 Jy ! Clean residual min=-0.006890 max=0.005868 Jy/beam ! Clean residual mean=0.000065 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 0.691575 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 100 components and 0.691575 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.498 mas, bmaj=15.42 mas, bpa=-7.231 degrees ! Estimated noise=1743.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00862484 Jy ! Component: 100 - total flux cleaned = 0.0121423 Jy ! Component: 150 - total flux cleaned = 0.0129032 Jy ! Component: 200 - total flux cleaned = 0.0134192 Jy ! Total flux subtracted in 200 components = 0.0134192 Jy ! Clean residual min=-0.006264 max=0.005426 Jy/beam ! Clean residual mean=0.000089 rms=0.001836 Jy/beam ! Combined flux in latest and established models = 0.704994 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 131 components and 0.704994 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=8.934 mas, bpa=-8.696 degrees ! Estimated noise=1382.52 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112242 Jy ! Component: 100 - total flux cleaned = 0.00172307 Jy ! Component: 150 - total flux cleaned = 0.00186513 Jy ! Component: 200 - total flux cleaned = 0.0021068 Jy ! Total flux subtracted in 200 components = 0.0021068 Jy ! Clean residual min=-0.006274 max=0.005501 Jy/beam ! Clean residual mean=0.000042 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.7071 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 158 components and 0.7071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.000339Jy sigma=0.001210 ! Fit after self-cal, rms=2.000024Jy sigma=0.001210 wmodel J1035-2011_S_1997_08_27_yyk\_map.mod ! Writing 158 model components to file: J1035-2011_S_1997_08_27_yyk_map.mod wobs J1035-2011_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1035-2011_S_1997_08_27_yyk_uvs.fits wwins J1035-2011_S_1997_08_27_yyk\_map.win ! wwins: Wrote 3 windows to J1035-2011_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139774 Jy ! Component: 100 - total flux cleaned = -0.00194934 Jy ! Component: 150 - total flux cleaned = -0.00195013 Jy ! Component: 200 - total flux cleaned = -0.00171766 Jy ! Component: 250 - total flux cleaned = -0.00157037 Jy ! Component: 300 - total flux cleaned = -0.00170982 Jy ! Component: 350 - total flux cleaned = -0.00177696 Jy ! Component: 400 - total flux cleaned = -0.00190793 Jy ! Component: 450 - total flux cleaned = -0.00178502 Jy ! Component: 500 - total flux cleaned = -0.00178668 Jy ! Component: 550 - total flux cleaned = -0.00190407 Jy ! Component: 600 - total flux cleaned = -0.00178939 Jy ! Component: 650 - total flux cleaned = -0.00179106 Jy ! Component: 700 - total flux cleaned = -0.00179132 Jy ! Component: 750 - total flux cleaned = -0.00179187 Jy ! Component: 800 - total flux cleaned = -0.00169088 Jy ! Component: 850 - total flux cleaned = -0.00184261 Jy ! Component: 900 - total flux cleaned = -0.00164591 Jy ! Component: 950 - total flux cleaned = -0.00159907 Jy ! Component: 1000 - total flux cleaned = -0.0015988 Jy ! Component: 1050 - total flux cleaned = -0.00155303 Jy ! Component: 1100 - total flux cleaned = -0.00155269 Jy ! Component: 1150 - total flux cleaned = -0.00155145 Jy ! Component: 1200 - total flux cleaned = -0.00159368 Jy ! Component: 1250 - total flux cleaned = -0.00155207 Jy ! Component: 1300 - total flux cleaned = -0.00159432 Jy ! Component: 1350 - total flux cleaned = -0.00159432 Jy ! Component: 1400 - total flux cleaned = -0.00155482 Jy ! Component: 1450 - total flux cleaned = -0.00147768 Jy ! Component: 1500 - total flux cleaned = -0.00140054 Jy ! Component: 1550 - total flux cleaned = -0.00132456 Jy ! Component: 1600 - total flux cleaned = -0.00132455 Jy ! Component: 1650 - total flux cleaned = -0.00117793 Jy ! Component: 1700 - total flux cleaned = -0.00110588 Jy ! Component: 1750 - total flux cleaned = -0.00121301 Jy ! Component: 1800 - total flux cleaned = -0.00110741 Jy ! Component: 1850 - total flux cleaned = -0.00110817 Jy ! Component: 1900 - total flux cleaned = -0.00110832 Jy ! Component: 1950 - total flux cleaned = -0.00104157 Jy ! Component: 2000 - total flux cleaned = -0.00100875 Jy ! Total flux subtracted in 2048 components = -0.0010089 Jy ! Clean residual min=-0.001891 max=0.001981 Jy/beam ! Clean residual mean=0.000034 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.706091 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 287 components and 0.706092 Jy ![Exited script file: muppet] wmap "J1035-2011_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 8.934 at -8.696 degrees (North through East) ! Clean map min=-0.0045511 max=0.44816 Jy/beam ! Writing clean map to FITS file: J1035-2011_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.448164 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000661005 device "J1035-2011_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1035-2011_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.442475 0.442475 0.88495 1.7699 3.5398 7.0796 14.1592 28.3184 56.6368 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.448 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 8.934 at -8.696 degrees (North through East) ! Clean map min=-0.0045511 max=0.44816 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1035-2011_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1035-2011_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1035-2011_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 17:31:21 2007