! Started logfile: J1022-1037_X_1997_05_07_yyk_uvs.log on Mon Jan 8 04:48:25 2007 obs J1022-1037_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1022-1037_X_1997_05_07_yyk_uva.fits ! AN table 1: 101 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.220242 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1022-1037 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 4004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1022-1037_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.557988 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8414 mas, bmaj=2.964 mas, bpa=-24.13 degrees ! Estimated noise=2666.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114434 Jy ! Component: 100 - total flux cleaned = 0.015285 Jy ! Total flux subtracted in 100 components = 0.015285 Jy ! Clean residual min=-0.020586 max=0.020641 Jy/beam ! Clean residual mean=-0.000018 rms=0.011683 Jy/beam ! Combined flux in latest and established models = 0.015285 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.015285 Jy ! ! Correcting IF 1. ! A total of 510 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 544 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 510 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 680 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.555315Jy sigma=0.003276 ! Fit after self-cal, rms=0.555380Jy sigma=0.003276 ! Inverting map and beam ! Estimated beam: bmin=0.8414 mas, bmaj=2.964 mas, bpa=-24.13 degrees ! Estimated noise=2666.25 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.959 mas, bmaj=2.902 mas, bpa=-20.06 degrees ! Estimated noise=1731.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412154 Jy ! Component: 100 - total flux cleaned = 0.00992431 Jy ! Component: 150 - total flux cleaned = 0.0150161 Jy ! Component: 200 - total flux cleaned = 0.0182121 Jy ! Total flux subtracted in 200 components = 0.0182121 Jy ! Clean residual min=-0.006376 max=0.006421 Jy/beam ! Clean residual mean=0.000018 rms=0.002890 Jy/beam ! Combined flux in latest and established models = 0.0334971 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 63 model components to the UV plane model. ! The established model now contains 115 components and 0.0334971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554127Jy sigma=0.003268 ! Fit after self-cal, rms=0.554111Jy sigma=0.003268 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.959 x 2.902 at -20.06 degrees (North through East) ! Clean map min=-0.014857 max=0.013603 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.98642 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.93 HN 1.00* KP 0.99 ! LA 1.00* MK 0.90 NL 1.00* OV 1.19 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.554111Jy sigma=0.003268 ! Fit after self-cal, rms=0.555683Jy sigma=0.003268 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.555683Jy sigma=0.003268 ! Fit after self-cal, rms=0.555683Jy sigma=0.003268 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.929 mas, bmaj=2.929 mas, bpa=-19.74 degrees ! Estimated noise=1726.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387422 Jy ! Component: 100 - total flux cleaned = 0.00257683 Jy ! Component: 150 - total flux cleaned = 0.00088687 Jy ! Component: 200 - total flux cleaned = 4.49459e-05 Jy ! Total flux subtracted in 200 components = 4.49459e-05 Jy ! Clean residual min=-0.005207 max=0.005194 Jy/beam ! Clean residual mean=-0.000004 rms=0.002482 Jy/beam ! Combined flux in latest and established models = 0.033542 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 63 model components to the UV plane model. ! The established model now contains 163 components and 0.033542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.555071Jy sigma=0.003265 ! Fit after self-cal, rms=0.555057Jy sigma=0.003265 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.555057Jy sigma=0.003265 ! Fit after self-cal, rms=0.552021Jy sigma=0.003248 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00744311 Jy ! Component: 100 - total flux cleaned = 0.00275161 Jy ! Component: 150 - total flux cleaned = -4.20561e-05 Jy ! Component: 200 - total flux cleaned = -0.00482071 Jy ! Total flux subtracted in 200 components = -0.00482071 Jy ! Clean residual min=-0.008521 max=0.008431 Jy/beam ! Clean residual mean=0.000006 rms=0.004868 Jy/beam ! Combined flux in latest and established models = 0.0287213 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 82 model components to the UV plane model. ! The established model now contains 236 components and 0.0287213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.550030Jy sigma=0.003237 ! Fit after self-cal, rms=0.549659Jy sigma=0.003234 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.929 x 2.929 at -19.74 degrees (North through East) ! Clean map min=-0.018786 max=0.018229 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.437 mas, bmaj=3.473 mas, bpa=17.07 degrees ! Estimated noise=2235.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190013 Jy ! Component: 100 - total flux cleaned = -0.00324966 Jy ! Component: 150 - total flux cleaned = -0.00647657 Jy ! Component: 200 - total flux cleaned = -0.00753056 Jy ! Total flux subtracted in 200 components = -0.00753056 Jy ! Clean residual min=-0.002608 max=0.002648 Jy/beam ! Clean residual mean=0.000000 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.0211908 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 277 components and 0.0211908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.549128Jy sigma=0.003231 ! Fit after self-cal, rms=0.549163Jy sigma=0.003231 ! Inverting map ! Added new window around map position (-21.2, 24). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838287 Jy ! Component: 100 - total flux cleaned = -0.00041288 Jy ! Component: 150 - total flux cleaned = -0.00159674 Jy ! Component: 200 - total flux cleaned = -0.00256472 Jy ! Total flux subtracted in 200 components = -0.00256472 Jy ! Clean residual min=-0.003712 max=0.004271 Jy/beam ! Clean residual mean=-0.000006 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.0186261 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 303 components and 0.0186261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.548951Jy sigma=0.003230 ! Fit after self-cal, rms=0.549056Jy sigma=0.003231 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8317 mas, bmaj=2.968 mas, bpa=-23.91 degrees ! Estimated noise=2655.08 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339851 Jy ! Component: 100 - total flux cleaned = 0.0464735 Jy ! Component: 150 - total flux cleaned = 0.0441944 Jy ! Component: 200 - total flux cleaned = 0.042239 Jy ! Total flux subtracted in 200 components = 0.042239 Jy ! Clean residual min=-0.045247 max=0.046215 Jy/beam ! Clean residual mean=0.000039 rms=0.019235 Jy/beam ! Combined flux in latest and established models = 0.042239 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.042239 Jy ! Inverting map and beam ! Estimated beam: bmin=0.929 mas, bmaj=2.929 mas, bpa=-19.74 degrees ! Estimated noise=1726.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107712 Jy ! Component: 100 - total flux cleaned = -0.00205761 Jy ! Component: 150 - total flux cleaned = -0.00243911 Jy ! Component: 200 - total flux cleaned = -0.00242296 Jy ! Total flux subtracted in 200 components = -0.00242296 Jy ! Clean residual min=-0.021948 max=0.027953 Jy/beam ! Clean residual mean=0.000077 rms=0.007119 Jy/beam ! Combined flux in latest and established models = 0.039816 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 0.039816 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.437 mas, bmaj=3.473 mas, bpa=17.07 degrees ! Estimated noise=2235.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00635449 Jy ! Component: 100 - total flux cleaned = 0.0107061 Jy ! Component: 150 - total flux cleaned = 0.0148831 Jy ! Component: 200 - total flux cleaned = 0.0191225 Jy ! Total flux subtracted in 200 components = 0.0191225 Jy ! Clean residual min=-0.019941 max=0.024322 Jy/beam ! Clean residual mean=0.000146 rms=0.006563 Jy/beam ! Combined flux in latest and established models = 0.0589385 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 0.0589385 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.929 mas, bmaj=2.929 mas, bpa=-19.74 degrees ! Estimated noise=1726.86 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000867403 Jy ! Component: 100 - total flux cleaned = 0.0043472 Jy ! Component: 150 - total flux cleaned = 0.00434316 Jy ! Component: 200 - total flux cleaned = 0.00433893 Jy ! Total flux subtracted in 200 components = 0.00433893 Jy ! Clean residual min=-0.020767 max=0.025714 Jy/beam ! Clean residual mean=0.000075 rms=0.006641 Jy/beam ! Combined flux in latest and established models = 0.0632774 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 107 components and 0.0632774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.552831Jy sigma=0.003254 ! Fit after self-cal, rms=0.551593Jy sigma=0.003246 wmodel J1022-1037_X_1997_05_07_yyk\_map.mod ! Writing 107 model components to file: J1022-1037_X_1997_05_07_yyk_map.mod wobs J1022-1037_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1022-1037_X_1997_05_07_yyk_uvs.fits wwins J1022-1037_X_1997_05_07_yyk\_map.win ! wwins: Wrote 1 windows to J1022-1037_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705594 Jy ! Component: 100 - total flux cleaned = 0.00706236 Jy ! Component: 150 - total flux cleaned = 0.0081654 Jy ! Component: 200 - total flux cleaned = 0.00843454 Jy ! Component: 250 - total flux cleaned = 0.00942548 Jy ! Component: 300 - total flux cleaned = 0.0103526 Jy ! Component: 350 - total flux cleaned = 0.0085752 Jy ! Component: 400 - total flux cleaned = 0.00685788 Jy ! Component: 450 - total flux cleaned = 0.0058149 Jy ! Component: 500 - total flux cleaned = 0.00400264 Jy ! Component: 550 - total flux cleaned = 0.00301761 Jy ! Component: 600 - total flux cleaned = 0.00166304 Jy ! Component: 650 - total flux cleaned = 0.000146187 Jy ! Component: 700 - total flux cleaned = -0.000973084 Jy ! Component: 750 - total flux cleaned = -0.00170874 Jy ! Component: 800 - total flux cleaned = -0.0020725 Jy ! Component: 850 - total flux cleaned = -0.00279386 Jy ! Component: 900 - total flux cleaned = -0.00315097 Jy ! Component: 950 - total flux cleaned = -0.00403375 Jy ! Component: 1000 - total flux cleaned = -0.00456278 Jy ! Component: 1050 - total flux cleaned = -0.00491092 Jy ! Component: 1100 - total flux cleaned = -0.00525895 Jy ! Component: 1150 - total flux cleaned = -0.00647622 Jy ! Component: 1200 - total flux cleaned = -0.0069964 Jy ! Component: 1250 - total flux cleaned = -0.00769011 Jy ! Component: 1300 - total flux cleaned = -0.00873196 Jy ! Component: 1350 - total flux cleaned = -0.00942745 Jy ! Component: 1400 - total flux cleaned = -0.010122 Jy ! Component: 1450 - total flux cleaned = -0.0109965 Jy ! Component: 1500 - total flux cleaned = -0.0116982 Jy ! Component: 1550 - total flux cleaned = -0.0127536 Jy ! Component: 1600 - total flux cleaned = -0.0131096 Jy ! Component: 1650 - total flux cleaned = -0.0138195 Jy ! Component: 1700 - total flux cleaned = -0.0147132 Jy ! Component: 1750 - total flux cleaned = -0.0152552 Jy ! Component: 1800 - total flux cleaned = -0.01598 Jy ! Component: 1850 - total flux cleaned = -0.0167087 Jy ! Component: 1900 - total flux cleaned = -0.017443 Jy ! Component: 1950 - total flux cleaned = -0.0181817 Jy ! Component: 2000 - total flux cleaned = -0.0187404 Jy ! Total flux subtracted in 2048 components = -0.0194923 Jy ! Clean residual min=-0.010663 max=0.009829 Jy/beam ! Clean residual mean=-0.000026 rms=0.003773 Jy/beam ! Combined flux in latest and established models = 0.0437851 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 235 components and 0.0437852 Jy ![Exited script file: muppet] wmap "J1022-1037_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.929 x 2.929 at -19.74 degrees (North through East) ! Clean map min=-0.029042 max=0.037963 Jy/beam ! Writing clean map to FITS file: J1022-1037_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0379633 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00374782 device "J1022-1037_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1022-1037_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -29.6166 29.6166 59.2332 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0112 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.037 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.929 x 2.929 at -19.74 degrees (North through East) ! Clean map min=-0.029042 max=0.037963 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1022-1037_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1022-1037_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1022-1037_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 04:48:33 2007