! Started logfile: J1010-0200_S_1997_05_07_yyk_uvs.log on Sun Jan  7 17:25:52 2007
obs J1010-0200_S_1997_05_07_yyk_uva.fits
! Reading UV FITS file: J1010-0200_S_1997_05_07_yyk_uva.fits
! AN table 1: 140 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.968254 visibilities/baseline/integration-bin.
! Found source: J1010-0200
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22447e+09        8e+06          1        8e+06
!  02        2  2.23447e+09        8e+06          1        8e+06
!  03        3  2.29447e+09        8e+06          1        8e+06
!  04        4  2.32447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 614 lines of history.
! 
! Reading 24400 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1010-0200_S_1997_05_07_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.450793 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.719 mas, bmaj=7.171 mas, bpa=-3.652 degrees
! Estimated noise=1539.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.291142 Jy
! Component: 100  -  total flux cleaned = 0.367266 Jy
! Total flux subtracted in 100 components = 0.367266 Jy
! Clean residual min=-0.016144 max=0.021586 Jy/beam
! Clean residual mean=0.000254 rms=0.004379 Jy/beam
! Combined flux in latest and established models = 0.367266 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.367266 Jy
! 
! Correcting IF 1.
!  A total of 171 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.284006Jy  sigma=0.001244
! Fit after  self-cal, rms=0.283671Jy  sigma=0.001243
! Inverting map and beam 
! Estimated beam: bmin=2.719 mas, bmaj=7.171 mas, bpa=-3.652 degrees
! Estimated noise=1542.07 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.504 mas, bmaj=8.623 mas, bpa=-5.153 degrees
! Estimated noise=967.145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0429282 Jy
! Component: 100  -  total flux cleaned = 0.0599416 Jy
! Component: 150  -  total flux cleaned = 0.0687162 Jy
! Component: 200  -  total flux cleaned = 0.0711133 Jy
! Total flux subtracted in 200 components = 0.0711133 Jy
! Clean residual min=-0.012776 max=0.022320 Jy/beam
! Clean residual mean=0.000355 rms=0.003815 Jy/beam
! Combined flux in latest and established models = 0.438379 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 37 components and 0.438379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.278972Jy  sigma=0.001220
! Fit after  self-cal, rms=0.278932Jy  sigma=0.001220
! Inverting map 
! Added new window around map position (1.5, 14.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0241268 Jy
! Component: 100  -  total flux cleaned = 0.0334887 Jy
! Component: 150  -  total flux cleaned = 0.0368386 Jy
! Component: 200  -  total flux cleaned = 0.0382116 Jy
! Total flux subtracted in 200 components = 0.0382116 Jy
! Clean residual min=-0.007884 max=0.014650 Jy/beam
! Clean residual mean=0.000196 rms=0.002575 Jy/beam
! Combined flux in latest and established models = 0.476591 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 69 components and 0.476591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.277461Jy  sigma=0.001212
! Fit after  self-cal, rms=0.277307Jy  sigma=0.001211
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.504 x 8.623 at -5.153 degrees (North through East)
! Clean map  min=-0.0067883  max=0.32302 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02961
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        0.94     KP        0.90     
!   LA        1.00     MK        0.97     NL        1.00*    OV        1.07     
!   PT        0.95     SC        0.87     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.973887
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        1.05     KP        1.02     
!   LA        1.09     MK        1.03     NL        1.07     OV        1.00     
!   PT        0.93     SC        0.93     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.05781
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.05     HN        0.94     KP        0.92     
!   LA        0.80     MK        0.87     NL        0.93     OV        0.95     
!   PT        1.09     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.993359
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.10     HN        1.04     KP        0.94     
!   LA        0.91     MK        1.06     NL        1.12     OV        1.09     
!   PT        0.91     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.277307Jy  sigma=0.001211
! Fit after  self-cal, rms=0.269690Jy  sigma=0.001200
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.269690Jy  sigma=0.001200
! Fit after  self-cal, rms=0.269688Jy  sigma=0.001200
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.449 mas, bmaj=8.354 mas, bpa=-3.885 degrees
! Estimated noise=973.516 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00871882 Jy
! Component: 100  -  total flux cleaned = 0.01142 Jy
! Component: 150  -  total flux cleaned = 0.0122412 Jy
! Component: 200  -  total flux cleaned = 0.0124691 Jy
! Total flux subtracted in 200 components = 0.0124691 Jy
! Clean residual min=-0.005856 max=0.005183 Jy/beam
! Clean residual mean=0.000047 rms=0.001527 Jy/beam
! Combined flux in latest and established models = 0.48906 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 90 components and 0.48906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.269429Jy  sigma=0.001198
! Fit after  self-cal, rms=0.269409Jy  sigma=0.001198
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.269409Jy  sigma=0.001198
! Fit after  self-cal, rms=0.267324Jy  sigma=0.001189
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209887 Jy
! Component: 100  -  total flux cleaned = 0.00266563 Jy
! Component: 150  -  total flux cleaned = 0.00266737 Jy
! Component: 200  -  total flux cleaned = 0.00267132 Jy
! Total flux subtracted in 200 components = 0.00267132 Jy
! Clean residual min=-0.005328 max=0.005371 Jy/beam
! Clean residual mean=0.000041 rms=0.001464 Jy/beam
! Combined flux in latest and established models = 0.491731 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 105 components and 0.491731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.267245Jy  sigma=0.001189
! Fit after  self-cal, rms=0.266998Jy  sigma=0.001188
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.449 x 8.354 at -3.885 degrees (North through East)
! Clean map  min=-0.005142  max=0.32236 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.266998Jy  sigma=0.001188
! Fit after  self-cal, rms=0.264435Jy  sigma=0.001180
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264435Jy  sigma=0.001180
! Fit after  self-cal, rms=0.264393Jy  sigma=0.001180
! Inverting map and beam 
! Estimated beam: bmin=3.434 mas, bmaj=8.281 mas, bpa=-3.491 degrees
! Estimated noise=965.236 mJy/beam.
! Added new window around map position (-0.5, 49).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0056702 Jy
! Component: 100  -  total flux cleaned = 0.0062933 Jy
! Component: 150  -  total flux cleaned = 0.00617529 Jy
! Component: 200  -  total flux cleaned = 0.00629332 Jy
! Total flux subtracted in 200 components = 0.00629332 Jy
! Clean residual min=-0.004037 max=0.003661 Jy/beam
! Clean residual mean=-0.000011 rms=0.001054 Jy/beam
! Combined flux in latest and established models = 0.498024 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 138 components and 0.498024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264260Jy  sigma=0.001179
! Fit after  self-cal, rms=0.264249Jy  sigma=0.001179
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264249Jy  sigma=0.001179
! Fit after  self-cal, rms=0.264219Jy  sigma=0.001178
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264219Jy  sigma=0.001178
! Fit after  self-cal, rms=0.264221Jy  sigma=0.001178
! Inverting map and beam 
! Estimated beam: bmin=3.431 mas, bmaj=8.254 mas, bpa=-3.272 degrees
! Estimated noise=963.271 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000635199 Jy
! Component: 100  -  total flux cleaned = 0.000439542 Jy
! Component: 150  -  total flux cleaned = 0.000438568 Jy
! Component: 200  -  total flux cleaned = 0.000357239 Jy
! Total flux subtracted in 200 components = 0.000357239 Jy
! Clean residual min=-0.003892 max=0.003528 Jy/beam
! Clean residual mean=-0.000017 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.498382 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 150 components and 0.498382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264174Jy  sigma=0.001177
! Fit after  self-cal, rms=0.264175Jy  sigma=0.001177
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.988 mas, bmaj=12.84 mas, bpa=2.662 degrees
! Estimated noise=1207.85 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140507 Jy
! Component: 100  -  total flux cleaned = 0.00149379 Jy
! Component: 150  -  total flux cleaned = 0.00142916 Jy
! Component: 200  -  total flux cleaned = 0.00142804 Jy
! Total flux subtracted in 200 components = 0.00142804 Jy
! Clean residual min=-0.003168 max=0.003869 Jy/beam
! Clean residual mean=-0.000031 rms=0.001057 Jy/beam
! Combined flux in latest and established models = 0.49981 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 163 components and 0.49981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264167Jy  sigma=0.001177
! Fit after  self-cal, rms=0.264167Jy  sigma=0.001177
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.684 mas, bmaj=7.046 mas, bpa=-2.459 degrees
! Estimated noise=1534.56 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.296806 Jy
! Component: 100  -  total flux cleaned = 0.375172 Jy
! Component: 150  -  total flux cleaned = 0.407844 Jy
! Component: 200  -  total flux cleaned = 0.427318 Jy
! Total flux subtracted in 200 components = 0.427318 Jy
! Clean residual min=-0.007143 max=0.008907 Jy/beam
! Clean residual mean=0.000093 rms=0.002150 Jy/beam
! Combined flux in latest and established models = 0.427318 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.427318 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.431 mas, bmaj=8.254 mas, bpa=-3.272 degrees
! Estimated noise=963.271 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233905 Jy
! Component: 100  -  total flux cleaned = 0.0364677 Jy
! Component: 150  -  total flux cleaned = 0.0451655 Jy
! Component: 200  -  total flux cleaned = 0.0515798 Jy
! Total flux subtracted in 200 components = 0.0515798 Jy
! Clean residual min=-0.004502 max=0.004329 Jy/beam
! Clean residual mean=0.000075 rms=0.001324 Jy/beam
! Combined flux in latest and established models = 0.478897 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 90 components and 0.478897 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.988 mas, bmaj=12.84 mas, bpa=2.662 degrees
! Estimated noise=1207.85 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00726222 Jy
! Component: 100  -  total flux cleaned = 0.0115604 Jy
! Component: 150  -  total flux cleaned = 0.0142769 Jy
! Component: 200  -  total flux cleaned = 0.0154919 Jy
! Total flux subtracted in 200 components = 0.0154919 Jy
! Clean residual min=-0.003752 max=0.003877 Jy/beam
! Clean residual mean=0.000017 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.494389 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 131 components and 0.494389 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.431 mas, bmaj=8.254 mas, bpa=-3.272 degrees
! Estimated noise=963.271 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018692 Jy
! Component: 100  -  total flux cleaned = 0.000552039 Jy
! Component: 150  -  total flux cleaned = 0.000858841 Jy
! Component: 200  -  total flux cleaned = 0.00103356 Jy
! Total flux subtracted in 200 components = 0.00103356 Jy
! Clean residual min=-0.003597 max=0.003467 Jy/beam
! Clean residual mean=0.000007 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.495423 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 155 components and 0.495423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264194Jy  sigma=0.001178
! Fit after  self-cal, rms=0.264190Jy  sigma=0.001178
wmodel J1010-0200_S_1997_05_07_yyk\_map.mod
! Writing 155 model components to file: J1010-0200_S_1997_05_07_yyk_map.mod
wobs J1010-0200_S_1997_05_07_yyk\_uvs.fits
! Writing UV FITS file: J1010-0200_S_1997_05_07_yyk_uvs.fits
wwins J1010-0200_S_1997_05_07_yyk\_map.win
! wwins: Wrote 3 windows to J1010-0200_S_1997_05_07_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.99745e-05 Jy
! Component: 100  -  total flux cleaned = -0.000496142 Jy
! Component: 150  -  total flux cleaned = -0.000606385 Jy
! Component: 200  -  total flux cleaned = -0.000607401 Jy
! Component: 250  -  total flux cleaned = -0.000608849 Jy
! Component: 300  -  total flux cleaned = -0.000659154 Jy
! Component: 350  -  total flux cleaned = -0.000660801 Jy
! Component: 400  -  total flux cleaned = -0.000661086 Jy
! Component: 450  -  total flux cleaned = -0.000615383 Jy
! Component: 500  -  total flux cleaned = -0.000659266 Jy
! Component: 550  -  total flux cleaned = -0.000531838 Jy
! Component: 600  -  total flux cleaned = -0.000574322 Jy
! Component: 650  -  total flux cleaned = -0.000492876 Jy
! Component: 700  -  total flux cleaned = -0.000453521 Jy
! Component: 750  -  total flux cleaned = -0.000375126 Jy
! Component: 800  -  total flux cleaned = -0.000298181 Jy
! Component: 850  -  total flux cleaned = -0.000146184 Jy
! Component: 900  -  total flux cleaned = -0.000109275 Jy
! Component: 950  -  total flux cleaned = -3.60145e-05 Jy
! Component: 1000  -  total flux cleaned = 0.00018007 Jy
! Component: 1050  -  total flux cleaned = 0.000322744 Jy
! Component: 1100  -  total flux cleaned = 0.000567187 Jy
! Component: 1150  -  total flux cleaned = 0.000601661 Jy
! Component: 1200  -  total flux cleaned = 0.000874011 Jy
! Component: 1250  -  total flux cleaned = 0.000975169 Jy
! Component: 1300  -  total flux cleaned = 0.0010752 Jy
! Component: 1350  -  total flux cleaned = 0.00114105 Jy
! Component: 1400  -  total flux cleaned = 0.00136752 Jy
! Component: 1450  -  total flux cleaned = 0.00146338 Jy
! Component: 1500  -  total flux cleaned = 0.00149531 Jy
! Component: 1550  -  total flux cleaned = 0.00165115 Jy
! Component: 1600  -  total flux cleaned = 0.00171248 Jy
! Component: 1650  -  total flux cleaned = 0.00174277 Jy
! Component: 1700  -  total flux cleaned = 0.00189348 Jy
! Component: 1750  -  total flux cleaned = 0.00198254 Jy
! Component: 1800  -  total flux cleaned = 0.00204121 Jy
! Component: 1850  -  total flux cleaned = 0.00204112 Jy
! Component: 1900  -  total flux cleaned = 0.00221457 Jy
! Component: 1950  -  total flux cleaned = 0.00227175 Jy
! Component: 2000  -  total flux cleaned = 0.00244121 Jy
! Total flux subtracted in 2048 components = 0.00258103 Jy
! Clean residual min=-0.001752 max=0.001636 Jy/beam
! Clean residual mean=-0.000011 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.498004 Jy
keep
! Adding 140 model components to the UV plane model.
! The established model now contains 295 components and 0.498004 Jy
![Exited script file: muppet]
wmap "J1010-0200_S_1997_05_07_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.431 x 8.254 at -3.272 degrees (North through East)
! Clean map  min=-0.002943  max=0.32359 Jy/beam
! Writing clean map to FITS file: J1010-0200_S_1997_05_07_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.323592 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000580093 
device "J1010-0200_S_1997_05_07_yyk\_map.eps/VPS"
! Attempting to open device: 'J1010-0200_S_1997_05_07_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.5378 0.5378 1.0756 2.1512 4.3024 8.6048 17.2096 34.4192 68.8384
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0017 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.323 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.431 x 8.254 at -3.272 degrees (North through East)
! Clean map  min=-0.002943  max=0.32359 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1010-0200_S_1997_05_07_yyk\_map.gif/gif"
! Attempting to open device: 'J1010-0200_S_1997_05_07_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1010-0200_S_1997_05_07_yyk_uvs.log closed on Sun Jan  7 17:26:00 2007