! Started logfile: J1008-0933_S_1997_05_07_yyk_uvs.log on Sun Jan 7 17:25:44 2007 obs J1008-0933_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1008-0933_S_1997_05_07_yyk_uva.fits ! AN table 1: 139 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969624 visibilities/baseline/integration-bin. ! Found source: J1008-0933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 24260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1008-0933_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.58901 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=7.104 mas, bpa=-2.144 degrees ! Estimated noise=1636.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.417274 Jy ! Component: 100 - total flux cleaned = 0.49083 Jy ! Total flux subtracted in 100 components = 0.49083 Jy ! Clean residual min=-0.015117 max=0.023126 Jy/beam ! Clean residual mean=0.000455 rms=0.004875 Jy/beam ! Combined flux in latest and established models = 0.49083 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.49083 Jy ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.305960Jy sigma=0.001261 ! Fit after self-cal, rms=0.305358Jy sigma=0.001259 ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=7.104 mas, bpa=-2.144 degrees ! Estimated noise=1647.69 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=8.789 mas, bpa=-4.992 degrees ! Estimated noise=1026.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443549 Jy ! Component: 100 - total flux cleaned = 0.0640037 Jy ! Component: 150 - total flux cleaned = 0.0761874 Jy ! Component: 200 - total flux cleaned = 0.0836662 Jy ! Total flux subtracted in 200 components = 0.0836662 Jy ! Clean residual min=-0.010026 max=0.013608 Jy/beam ! Clean residual mean=0.000236 rms=0.003233 Jy/beam ! Combined flux in latest and established models = 0.574497 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 45 components and 0.574496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300052Jy sigma=0.001237 ! Fit after self-cal, rms=0.299916Jy sigma=0.001236 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.49 x 8.789 at -4.992 degrees (North through East) ! Clean map min=-0.009244 max=0.4868 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03479 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 0.95 KP 0.89 ! LA 0.99 MK 0.99 NL 1.00* OV 1.04 ! PT 0.96 SC 0.87 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.979726 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.11 HN 1.05 KP 1.00 ! LA 1.08 MK 1.05 NL 1.02 OV 1.02 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04303 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.94 KP 0.92 ! LA 0.81 MK 0.90 NL 0.94 OV 0.93 ! PT 1.08 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.977051 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.13 HN 1.03 KP 0.95 ! LA 0.89 MK 1.06 NL 1.10 OV 1.08 ! PT 0.92 SC 1.07 ! ! ! Fit before self-cal, rms=0.299916Jy sigma=0.001236 ! Fit after self-cal, rms=0.291933Jy sigma=0.001219 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291933Jy sigma=0.001219 ! Fit after self-cal, rms=0.291932Jy sigma=0.001219 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=8.761 mas, bpa=-4.688 degrees ! Estimated noise=1030.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762091 Jy ! Component: 100 - total flux cleaned = 0.00894877 Jy ! Component: 150 - total flux cleaned = 0.00882062 Jy ! Component: 200 - total flux cleaned = 0.0088173 Jy ! Total flux subtracted in 200 components = 0.0088173 Jy ! Clean residual min=-0.005736 max=0.005084 Jy/beam ! Clean residual mean=-0.000003 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.583314 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 71 components and 0.583314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291692Jy sigma=0.001219 ! Fit after self-cal, rms=0.291668Jy sigma=0.001218 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291668Jy sigma=0.001218 ! Fit after self-cal, rms=0.286916Jy sigma=0.001198 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111777 Jy ! Component: 100 - total flux cleaned = 0.00113386 Jy ! Component: 150 - total flux cleaned = 0.000704815 Jy ! Component: 200 - total flux cleaned = 0.000435349 Jy ! Total flux subtracted in 200 components = 0.000435349 Jy ! Clean residual min=-0.005404 max=0.004896 Jy/beam ! Clean residual mean=-0.000000 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.583749 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.583749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286790Jy sigma=0.001198 ! Fit after self-cal, rms=0.286296Jy sigma=0.001196 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 8.761 at -4.688 degrees (North through East) ! Clean map min=-0.0053988 max=0.49125 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286296Jy sigma=0.001196 ! Fit after self-cal, rms=0.282816Jy sigma=0.001186 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282816Jy sigma=0.001186 ! Fit after self-cal, rms=0.282747Jy sigma=0.001185 ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=8.716 mas, bpa=-4.543 degrees ! Estimated noise=1025.41 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127871 Jy ! Component: 100 - total flux cleaned = 0.000737689 Jy ! Component: 150 - total flux cleaned = 0.000216329 Jy ! Component: 200 - total flux cleaned = -0.000103207 Jy ! Total flux subtracted in 200 components = -0.000103207 Jy ! Clean residual min=-0.004665 max=0.004142 Jy/beam ! Clean residual mean=0.000004 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.583646 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.583646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282706Jy sigma=0.001185 ! Fit after self-cal, rms=0.282685Jy sigma=0.001185 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282685Jy sigma=0.001185 ! Fit after self-cal, rms=0.282835Jy sigma=0.001183 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282835Jy sigma=0.001183 ! Fit after self-cal, rms=0.282832Jy sigma=0.001183 ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.707 mas, bpa=-4.482 degrees ! Estimated noise=1025.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00084856 Jy ! Component: 100 - total flux cleaned = 0.0004634 Jy ! Component: 150 - total flux cleaned = 0.00013429 Jy ! Component: 200 - total flux cleaned = -1.53475e-05 Jy ! Total flux subtracted in 200 components = -1.53475e-05 Jy ! Clean residual min=-0.004556 max=0.003959 Jy/beam ! Clean residual mean=0.000007 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.58363 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.58363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282810Jy sigma=0.001183 ! Fit after self-cal, rms=0.282806Jy sigma=0.001183 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.094 mas, bmaj=14.54 mas, bpa=2.951 degrees ! Estimated noise=1273.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286307 Jy ! Component: 100 - total flux cleaned = -0.00024448 Jy ! Component: 150 - total flux cleaned = -0.000275993 Jy ! Component: 200 - total flux cleaned = -0.000305788 Jy ! Total flux subtracted in 200 components = -0.000305788 Jy ! Clean residual min=-0.005188 max=0.004525 Jy/beam ! Clean residual mean=0.000022 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.583325 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.583325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282799Jy sigma=0.001183 ! Fit after self-cal, rms=0.282796Jy sigma=0.001183 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.072 mas, bpa=-1.751 degrees ! Estimated noise=1646.01 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.419123 Jy ! Component: 100 - total flux cleaned = 0.500601 Jy ! Component: 150 - total flux cleaned = 0.535251 Jy ! Component: 200 - total flux cleaned = 0.552787 Jy ! Total flux subtracted in 200 components = 0.552787 Jy ! Clean residual min=-0.008894 max=0.009119 Jy/beam ! Clean residual mean=0.000162 rms=0.002502 Jy/beam ! Combined flux in latest and established models = 0.552786 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.552786 Jy ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.707 mas, bpa=-4.482 degrees ! Estimated noise=1025.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140696 Jy ! Component: 100 - total flux cleaned = 0.021721 Jy ! Component: 150 - total flux cleaned = 0.0262992 Jy ! Component: 200 - total flux cleaned = 0.0275676 Jy ! Total flux subtracted in 200 components = 0.0275676 Jy ! Clean residual min=-0.005015 max=0.004181 Jy/beam ! Clean residual mean=0.000032 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.580354 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 48 components and 0.580354 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.094 mas, bmaj=14.54 mas, bpa=2.951 degrees ! Estimated noise=1273.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219033 Jy ! Component: 100 - total flux cleaned = 0.00267572 Jy ! Component: 150 - total flux cleaned = 0.00281747 Jy ! Component: 200 - total flux cleaned = 0.00290223 Jy ! Total flux subtracted in 200 components = 0.00290223 Jy ! Clean residual min=-0.005376 max=0.004323 Jy/beam ! Clean residual mean=0.000031 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.583256 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.583256 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.707 mas, bpa=-4.482 degrees ! Estimated noise=1025.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000371866 Jy ! Component: 100 - total flux cleaned = -0.000462925 Jy ! Component: 150 - total flux cleaned = -0.000387221 Jy ! Component: 200 - total flux cleaned = -0.000461035 Jy ! Total flux subtracted in 200 components = -0.000461035 Jy ! Clean residual min=-0.004660 max=0.003788 Jy/beam ! Clean residual mean=0.000017 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.582795 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.582795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282852Jy sigma=0.001183 ! Fit after self-cal, rms=0.282834Jy sigma=0.001183 wmodel J1008-0933_S_1997_05_07_yyk\_map.mod ! Writing 80 model components to file: J1008-0933_S_1997_05_07_yyk_map.mod wobs J1008-0933_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1008-0933_S_1997_05_07_yyk_uvs.fits wwins J1008-0933_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J1008-0933_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151857 Jy ! Component: 100 - total flux cleaned = -0.0013105 Jy ! Component: 150 - total flux cleaned = -0.00104839 Jy ! Component: 200 - total flux cleaned = -0.000802789 Jy ! Component: 250 - total flux cleaned = -0.000630725 Jy ! Component: 300 - total flux cleaned = -0.000521053 Jy ! Component: 350 - total flux cleaned = -0.000415411 Jy ! Component: 400 - total flux cleaned = -0.000260009 Jy ! Component: 450 - total flux cleaned = -7.52424e-06 Jy ! Component: 500 - total flux cleaned = 9.06622e-05 Jy ! Component: 550 - total flux cleaned = -4.61855e-06 Jy ! Component: 600 - total flux cleaned = -0.000190173 Jy ! Component: 650 - total flux cleaned = -0.000371597 Jy ! Component: 700 - total flux cleaned = -0.000593501 Jy ! Component: 750 - total flux cleaned = -0.00072369 Jy ! Component: 800 - total flux cleaned = -0.000852209 Jy ! Component: 850 - total flux cleaned = -0.00106153 Jy ! Component: 900 - total flux cleaned = -0.00110322 Jy ! Component: 950 - total flux cleaned = -0.00130545 Jy ! Component: 1000 - total flux cleaned = -0.00150208 Jy ! Component: 1050 - total flux cleaned = -0.00153999 Jy ! Component: 1100 - total flux cleaned = -0.00161638 Jy ! Component: 1150 - total flux cleaned = -0.00169141 Jy ! Component: 1200 - total flux cleaned = -0.00165462 Jy ! Component: 1250 - total flux cleaned = -0.00169077 Jy ! Component: 1300 - total flux cleaned = -0.00176223 Jy ! Component: 1350 - total flux cleaned = -0.00176188 Jy ! Component: 1400 - total flux cleaned = -0.0019009 Jy ! Component: 1450 - total flux cleaned = -0.00200331 Jy ! Component: 1500 - total flux cleaned = -0.00203648 Jy ! Component: 1550 - total flux cleaned = -0.00210362 Jy ! Component: 1600 - total flux cleaned = -0.00217011 Jy ! Component: 1650 - total flux cleaned = -0.00223571 Jy ! Component: 1700 - total flux cleaned = -0.00230034 Jy ! Component: 1750 - total flux cleaned = -0.00239565 Jy ! Component: 1800 - total flux cleaned = -0.00245835 Jy ! Component: 1850 - total flux cleaned = -0.0024271 Jy ! Component: 1900 - total flux cleaned = -0.00245801 Jy ! Component: 1950 - total flux cleaned = -0.00254968 Jy ! Component: 2000 - total flux cleaned = -0.00260962 Jy ! Total flux subtracted in 2048 components = -0.00258004 Jy ! Clean residual min=-0.001868 max=0.001791 Jy/beam ! Clean residual mean=-0.000004 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.580215 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 212 components and 0.580215 Jy ![Exited script file: muppet] wmap "J1008-0933_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.485 x 8.707 at -4.482 degrees (North through East) ! Clean map min=-0.0038571 max=0.49106 Jy/beam ! Writing clean map to FITS file: J1008-0933_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.491063 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00060483 device "J1008-0933_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1008-0933_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.369502 0.369502 0.739004 1.47801 2.95602 5.91204 11.8241 23.6481 47.2963 94.5926 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.491 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.485 x 8.707 at -4.482 degrees (North through East) ! Clean map min=-0.0038571 max=0.49106 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1008-0933_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1008-0933_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1008-0933_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 17:25:52 2007