! Started logfile: J0935-2820_S_1997_08_27_yyk_uvs.log on Sun Jan 7 17:18:15 2007 obs J0935-2820_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J0935-2820_S_1997_08_27_yyk_uva.fits ! AN table 1: 136 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.761928 visibilities/baseline/integration-bin. ! Found source: J0935-2820 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 18652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0935-2820_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.642253 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=5.944 mas, bpa=-13.65 degrees ! Estimated noise=3000.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.143681 Jy ! Component: 100 - total flux cleaned = 0.225074 Jy ! Total flux subtracted in 100 components = 0.225074 Jy ! Clean residual min=-0.030630 max=0.046691 Jy/beam ! Clean residual mean=0.003312 rms=0.011244 Jy/beam ! Combined flux in latest and established models = 0.225074 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.225074 Jy ! ! Correcting IF 1. ! A total of 549 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 285 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.593624Jy sigma=0.001864 ! Fit after self-cal, rms=0.591326Jy sigma=0.001854 ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=5.944 mas, bpa=-13.65 degrees ! Estimated noise=3000.69 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=8.136 mas, bpa=-11.01 degrees ! Estimated noise=1672.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.131232 Jy ! Component: 100 - total flux cleaned = 0.186154 Jy ! Component: 150 - total flux cleaned = 0.209459 Jy ! Component: 200 - total flux cleaned = 0.218295 Jy ! Total flux subtracted in 200 components = 0.218295 Jy ! Clean residual min=-0.057373 max=0.069483 Jy/beam ! Clean residual mean=0.008136 rms=0.020458 Jy/beam ! Combined flux in latest and established models = 0.443369 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 58 components and 0.443369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572312Jy sigma=0.001787 ! Fit after self-cal, rms=0.571892Jy sigma=0.001786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 8.136 at -11.01 degrees (North through East) ! Clean map min=-0.057306 max=0.13266 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.571892Jy sigma=0.001786 ! Fit after self-cal, rms=0.571898Jy sigma=0.001786 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.571898Jy sigma=0.001786 ! Fit after self-cal, rms=0.571897Jy sigma=0.001786 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=8.136 mas, bpa=-11.01 degrees ! Estimated noise=1672.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313118 Jy ! Component: 100 - total flux cleaned = 0.00503163 Jy ! Component: 150 - total flux cleaned = 0.0066088 Jy ! Component: 200 - total flux cleaned = 0.00759553 Jy ! Total flux subtracted in 200 components = 0.00759553 Jy ! Clean residual min=-0.056481 max=0.066870 Jy/beam ! Clean residual mean=0.008065 rms=0.020251 Jy/beam ! Combined flux in latest and established models = 0.450964 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.450964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.571326Jy sigma=0.001785 ! Fit after self-cal, rms=0.571292Jy sigma=0.001784 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.571292Jy sigma=0.001784 ! Fit after self-cal, rms=0.569514Jy sigma=0.001779 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373877 Jy ! Component: 100 - total flux cleaned = 0.0048703 Jy ! Component: 150 - total flux cleaned = 0.00585541 Jy ! Component: 200 - total flux cleaned = 0.00646504 Jy ! Total flux subtracted in 200 components = 0.00646504 Jy ! Clean residual min=-0.055968 max=0.068951 Jy/beam ! Clean residual mean=0.008033 rms=0.020073 Jy/beam ! Combined flux in latest and established models = 0.457429 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.457429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569129Jy sigma=0.001778 ! Fit after self-cal, rms=0.568592Jy sigma=0.001776 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 8.136 at -11.01 degrees (North through East) ! Clean map min=-0.055792 max=0.12498 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568592Jy sigma=0.001776 ! Fit after self-cal, rms=0.568592Jy sigma=0.001776 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568592Jy sigma=0.001776 ! Fit after self-cal, rms=0.568423Jy sigma=0.001776 ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=8.136 mas, bpa=-11.01 degrees ! Estimated noise=1672.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159349 Jy ! Component: 100 - total flux cleaned = 0.00255025 Jy ! Component: 150 - total flux cleaned = 0.00338212 Jy ! Component: 200 - total flux cleaned = 0.00412365 Jy ! Total flux subtracted in 200 components = 0.00412365 Jy ! Clean residual min=-0.055037 max=0.067736 Jy/beam ! Clean residual mean=0.007983 rms=0.019969 Jy/beam ! Combined flux in latest and established models = 0.461553 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 78 components and 0.461553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568185Jy sigma=0.001775 ! Fit after self-cal, rms=0.568080Jy sigma=0.001775 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568080Jy sigma=0.001775 ! Fit after self-cal, rms=0.568080Jy sigma=0.001775 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568080Jy sigma=0.001775 ! Fit after self-cal, rms=0.568078Jy sigma=0.001775 ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=8.136 mas, bpa=-11.01 degrees ! Estimated noise=1672.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.7857e-05 Jy ! Component: 100 - total flux cleaned = 0.000714252 Jy ! Component: 150 - total flux cleaned = 0.00138336 Jy ! Component: 200 - total flux cleaned = 0.00179076 Jy ! Total flux subtracted in 200 components = 0.00179076 Jy ! Clean residual min=-0.055113 max=0.067668 Jy/beam ! Clean residual mean=0.007961 rms=0.019926 Jy/beam ! Combined flux in latest and established models = 0.463344 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.463344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.567977Jy sigma=0.001774 ! Fit after self-cal, rms=0.567961Jy sigma=0.001774 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.327 mas, bmaj=18.53 mas, bpa=-4.176 degrees ! Estimated noise=2093.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192636 Jy ! Component: 100 - total flux cleaned = 0.021279 Jy ! Component: 150 - total flux cleaned = 0.0224766 Jy ! Component: 200 - total flux cleaned = 0.0235579 Jy ! Total flux subtracted in 200 components = 0.0235579 Jy ! Clean residual min=-0.092473 max=0.108406 Jy/beam ! Clean residual mean=0.014564 rms=0.034109 Jy/beam ! Combined flux in latest and established models = 0.486902 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 81 components and 0.486901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568596Jy sigma=0.001776 ! Fit after self-cal, rms=0.568289Jy sigma=0.001775 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.663 mas, bmaj=5.943 mas, bpa=-13.61 degrees ! Estimated noise=3084.26 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.160365 Jy ! Component: 100 - total flux cleaned = 0.253634 Jy ! Component: 150 - total flux cleaned = 0.311866 Jy ! Component: 200 - total flux cleaned = 0.348452 Jy ! Total flux subtracted in 200 components = 0.348452 Jy ! Clean residual min=-0.030869 max=0.042463 Jy/beam ! Clean residual mean=0.002934 rms=0.010993 Jy/beam ! Combined flux in latest and established models = 0.348452 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.348452 Jy ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=8.136 mas, bpa=-11.01 degrees ! Estimated noise=1672.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0701172 Jy ! Component: 100 - total flux cleaned = 0.0988691 Jy ! Component: 150 - total flux cleaned = 0.10601 Jy ! Component: 200 - total flux cleaned = 0.108265 Jy ! Total flux subtracted in 200 components = 0.108265 Jy ! Clean residual min=-0.055310 max=0.068222 Jy/beam ! Clean residual mean=0.008043 rms=0.019995 Jy/beam ! Combined flux in latest and established models = 0.456717 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.456717 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.327 mas, bmaj=18.53 mas, bpa=-4.176 degrees ! Estimated noise=2093.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0241298 Jy ! Component: 100 - total flux cleaned = 0.0256248 Jy ! Component: 150 - total flux cleaned = 0.026988 Jy ! Component: 200 - total flux cleaned = 0.0282361 Jy ! Total flux subtracted in 200 components = 0.0282361 Jy ! Clean residual min=-0.092129 max=0.108385 Jy/beam ! Clean residual mean=0.014630 rms=0.034121 Jy/beam ! Combined flux in latest and established models = 0.484953 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 46 components and 0.484953 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=8.136 mas, bpa=-11.01 degrees ! Estimated noise=1672.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0178292 Jy ! Component: 100 - total flux cleaned = -0.0178555 Jy ! Component: 150 - total flux cleaned = -0.0172752 Jy ! Component: 200 - total flux cleaned = -0.0172787 Jy ! Total flux subtracted in 200 components = -0.0172787 Jy ! Clean residual min=-0.054929 max=0.067290 Jy/beam ! Clean residual mean=0.007926 rms=0.019796 Jy/beam ! Combined flux in latest and established models = 0.467674 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.467674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568448Jy sigma=0.001775 ! Fit after self-cal, rms=0.568099Jy sigma=0.001774 wmodel J0935-2820_S_1997_08_27_yyk\_map.mod ! Writing 52 model components to file: J0935-2820_S_1997_08_27_yyk_map.mod wobs J0935-2820_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J0935-2820_S_1997_08_27_yyk_uvs.fits wwins J0935-2820_S_1997_08_27_yyk\_map.win ! wwins: Wrote 1 windows to J0935-2820_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280385 Jy ! Component: 100 - total flux cleaned = 0.0475422 Jy ! Component: 150 - total flux cleaned = 0.0645738 Jy ! Component: 200 - total flux cleaned = 0.0813107 Jy ! Component: 250 - total flux cleaned = 0.0961539 Jy ! Component: 300 - total flux cleaned = 0.110911 Jy ! Component: 350 - total flux cleaned = 0.126317 Jy ! Component: 400 - total flux cleaned = 0.139594 Jy ! Component: 450 - total flux cleaned = 0.152352 Jy ! Component: 500 - total flux cleaned = 0.164586 Jy ! Component: 550 - total flux cleaned = 0.175738 Jy ! Component: 600 - total flux cleaned = 0.187697 Jy ! Component: 650 - total flux cleaned = 0.19693 Jy ! Component: 700 - total flux cleaned = 0.206422 Jy ! Component: 750 - total flux cleaned = 0.216167 Jy ! Component: 800 - total flux cleaned = 0.226131 Jy ! Component: 850 - total flux cleaned = 0.235305 Jy ! Component: 900 - total flux cleaned = 0.243738 Jy ! Component: 950 - total flux cleaned = 0.252399 Jy ! Component: 1000 - total flux cleaned = 0.259884 Jy ! Component: 1050 - total flux cleaned = 0.267638 Jy ! Component: 1100 - total flux cleaned = 0.276093 Jy ! Component: 1150 - total flux cleaned = 0.283905 Jy ! Component: 1200 - total flux cleaned = 0.291531 Jy ! Component: 1250 - total flux cleaned = 0.298566 Jy ! Component: 1300 - total flux cleaned = 0.305438 Jy ! Component: 1350 - total flux cleaned = 0.312941 Jy ! Component: 1400 - total flux cleaned = 0.320291 Jy ! Component: 1450 - total flux cleaned = 0.32748 Jy ! Component: 1500 - total flux cleaned = 0.33416 Jy ! Component: 1550 - total flux cleaned = 0.341077 Jy ! Component: 1600 - total flux cleaned = 0.34751 Jy ! Component: 1650 - total flux cleaned = 0.354521 Jy ! Component: 1700 - total flux cleaned = 0.361401 Jy ! Component: 1750 - total flux cleaned = 0.367823 Jy ! Component: 1800 - total flux cleaned = 0.374135 Jy ! Component: 1850 - total flux cleaned = 0.380657 Jy ! Component: 1900 - total flux cleaned = 0.386428 Jy ! Component: 1950 - total flux cleaned = 0.393044 Jy ! Component: 2000 - total flux cleaned = 0.399235 Jy ! Total flux subtracted in 2048 components = 0.403807 Jy ! Clean residual min=-0.017377 max=0.016505 Jy/beam ! Clean residual mean=0.004376 rms=0.007513 Jy/beam ! Combined flux in latest and established models = 0.87148 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 312 components and 0.87148 Jy ![Exited script file: muppet] wmap "J0935-2820_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 8.136 at -11.01 degrees (North through East) ! Clean map min=-0.028897 max=0.13065 Jy/beam ! Writing clean map to FITS file: J0935-2820_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130654 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00747486 device "J0935-2820_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0935-2820_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -17.1634 17.1634 34.3268 68.6536 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0224 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 8.136 at -11.01 degrees (North through East) ! Clean map min=-0.028897 max=0.13065 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0935-2820_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0935-2820_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0935-2820_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 17:18:22 2007