! Started logfile: J0923-2135_S_1997_08_27_yyk_uvs.log on Sun Jan 7 17:13:54 2007 obs J0923-2135_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J0923-2135_S_1997_08_27_yyk_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.871639 visibilities/baseline/integration-bin. ! Found source: J0923-2135 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 22436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0923-2135_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.594305 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=6.467 mas, bpa=-10.64 degrees ! Estimated noise=2615.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.132205 Jy ! Component: 100 - total flux cleaned = 0.169129 Jy ! Total flux subtracted in 100 components = 0.169129 Jy ! Clean residual min=-0.016969 max=0.018213 Jy/beam ! Clean residual mean=-0.000119 rms=0.004491 Jy/beam ! Combined flux in latest and established models = 0.169129 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.169129 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.572448Jy sigma=0.001786 ! Fit after self-cal, rms=0.571686Jy sigma=0.001782 ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=6.467 mas, bpa=-10.64 degrees ! Estimated noise=2615.53 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=7.79 mas, bpa=-13.8 degrees ! Estimated noise=1363.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240727 Jy ! Component: 100 - total flux cleaned = 0.034051 Jy ! Component: 150 - total flux cleaned = 0.0383102 Jy ! Component: 200 - total flux cleaned = 0.0385461 Jy ! Total flux subtracted in 200 components = 0.0385461 Jy ! Clean residual min=-0.009321 max=0.013361 Jy/beam ! Clean residual mean=0.000028 rms=0.003106 Jy/beam ! Combined flux in latest and established models = 0.207675 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.207675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.570896Jy sigma=0.001780 ! Fit after self-cal, rms=0.570872Jy sigma=0.001780 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.357 x 7.79 at -13.8 degrees (North through East) ! Clean map min=-0.0089492 max=0.14141 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.570872Jy sigma=0.001780 ! Fit after self-cal, rms=0.570872Jy sigma=0.001780 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.570872Jy sigma=0.001780 ! Fit after self-cal, rms=0.570862Jy sigma=0.001780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=7.79 mas, bpa=-13.8 degrees ! Estimated noise=1363.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000616448 Jy ! Component: 100 - total flux cleaned = 0.000823317 Jy ! Component: 150 - total flux cleaned = 0.000907741 Jy ! Component: 200 - total flux cleaned = 0.000990377 Jy ! Total flux subtracted in 200 components = 0.000990377 Jy ! Clean residual min=-0.009110 max=0.013313 Jy/beam ! Clean residual mean=0.000027 rms=0.003075 Jy/beam ! Combined flux in latest and established models = 0.208665 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.208665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.570826Jy sigma=0.001780 ! Fit after self-cal, rms=0.570810Jy sigma=0.001779 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.570810Jy sigma=0.001779 ! Fit after self-cal, rms=0.569355Jy sigma=0.001775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481138 Jy ! Component: 100 - total flux cleaned = 0.000973182 Jy ! Component: 150 - total flux cleaned = 0.0014009 Jy ! Component: 200 - total flux cleaned = 0.00178088 Jy ! Total flux subtracted in 200 components = 0.00178088 Jy ! Clean residual min=-0.011083 max=0.014509 Jy/beam ! Clean residual mean=0.000031 rms=0.003687 Jy/beam ! Combined flux in latest and established models = 0.210446 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.210446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569151Jy sigma=0.001774 ! Fit after self-cal, rms=0.568803Jy sigma=0.001773 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.357 x 7.79 at -13.8 degrees (North through East) ! Clean map min=-0.010931 max=0.14953 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568803Jy sigma=0.001773 ! Fit after self-cal, rms=0.568803Jy sigma=0.001773 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568803Jy sigma=0.001773 ! Fit after self-cal, rms=0.568666Jy sigma=0.001772 ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=7.79 mas, bpa=-13.8 degrees ! Estimated noise=1363.14 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000813407 Jy ! Component: 100 - total flux cleaned = 0.00116813 Jy ! Component: 150 - total flux cleaned = 0.00117329 Jy ! Component: 200 - total flux cleaned = 0.00132302 Jy ! Total flux subtracted in 200 components = 0.00132302 Jy ! Clean residual min=-0.010490 max=0.015722 Jy/beam ! Clean residual mean=0.000023 rms=0.003713 Jy/beam ! Combined flux in latest and established models = 0.211769 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.211769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568543Jy sigma=0.001772 ! Fit after self-cal, rms=0.568490Jy sigma=0.001772 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568490Jy sigma=0.001772 ! Fit after self-cal, rms=0.568490Jy sigma=0.001772 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568490Jy sigma=0.001772 ! Fit after self-cal, rms=0.568469Jy sigma=0.001772 ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=7.79 mas, bpa=-13.8 degrees ! Estimated noise=1363.14 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116643 Jy ! Component: 100 - total flux cleaned = -0.000260311 Jy ! Component: 150 - total flux cleaned = -0.000509432 Jy ! Component: 200 - total flux cleaned = -0.000627534 Jy ! Total flux subtracted in 200 components = -0.000627534 Jy ! Clean residual min=-0.010578 max=0.015633 Jy/beam ! Clean residual mean=0.000025 rms=0.003696 Jy/beam ! Combined flux in latest and established models = 0.211141 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.211141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568399Jy sigma=0.001772 ! Fit after self-cal, rms=0.568393Jy sigma=0.001772 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.624 mas, bmaj=14.55 mas, bpa=-10.16 degrees ! Estimated noise=1750.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (58.5, 19). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228058 Jy ! Component: 100 - total flux cleaned = 0.0274479 Jy ! Component: 150 - total flux cleaned = 0.0274652 Jy ! Component: 200 - total flux cleaned = 0.0274403 Jy ! Total flux subtracted in 200 components = 0.0274403 Jy ! Clean residual min=-0.012296 max=0.010531 Jy/beam ! Clean residual mean=-0.000257 rms=0.003423 Jy/beam ! Combined flux in latest and established models = 0.238582 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 58 model components to the UV plane model. ! The established model now contains 121 components and 0.238582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.567692Jy sigma=0.001769 ! Fit after self-cal, rms=0.567662Jy sigma=0.001769 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=6.467 mas, bpa=-10.64 degrees ! Estimated noise=2615.53 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.141615 Jy ! Component: 100 - total flux cleaned = 0.181536 Jy ! Component: 150 - total flux cleaned = 0.199987 Jy ! Component: 200 - total flux cleaned = 0.21321 Jy ! Total flux subtracted in 200 components = 0.21321 Jy ! Clean residual min=-0.015068 max=0.013704 Jy/beam ! Clean residual mean=-0.000045 rms=0.004219 Jy/beam ! Combined flux in latest and established models = 0.21321 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.21321 Jy ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=7.79 mas, bpa=-13.8 degrees ! Estimated noise=1363.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189141 Jy ! Component: 100 - total flux cleaned = 0.023812 Jy ! Component: 150 - total flux cleaned = 0.0261217 Jy ! Component: 200 - total flux cleaned = 0.02695 Jy ! Total flux subtracted in 200 components = 0.02695 Jy ! Clean residual min=-0.009431 max=0.011023 Jy/beam ! Clean residual mean=-0.000089 rms=0.003053 Jy/beam ! Combined flux in latest and established models = 0.24016 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 91 components and 0.24016 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.624 mas, bmaj=14.55 mas, bpa=-10.16 degrees ! Estimated noise=1750.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182781 Jy ! Component: 100 - total flux cleaned = 0.00183028 Jy ! Component: 150 - total flux cleaned = 0.00116996 Jy ! Component: 200 - total flux cleaned = 0.00118533 Jy ! Total flux subtracted in 200 components = 0.00118533 Jy ! Clean residual min=-0.012026 max=0.009940 Jy/beam ! Clean residual mean=-0.000204 rms=0.003342 Jy/beam ! Combined flux in latest and established models = 0.241345 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 128 components and 0.241345 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=7.79 mas, bpa=-13.8 degrees ! Estimated noise=1363.14 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00286851 Jy ! Component: 100 - total flux cleaned = -0.00255814 Jy ! Component: 150 - total flux cleaned = -0.00254631 Jy ! Component: 200 - total flux cleaned = -0.00226244 Jy ! Total flux subtracted in 200 components = -0.00226244 Jy ! Clean residual min=-0.008836 max=0.009948 Jy/beam ! Clean residual mean=-0.000088 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 0.239083 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 156 components and 0.239083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.567272Jy sigma=0.001768 ! Fit after self-cal, rms=0.567218Jy sigma=0.001768 wmodel J0923-2135_S_1997_08_27_yyk\_map.mod ! Writing 156 model components to file: J0923-2135_S_1997_08_27_yyk_map.mod wobs J0923-2135_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J0923-2135_S_1997_08_27_yyk_uvs.fits wwins J0923-2135_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J0923-2135_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156387 Jy ! Component: 100 - total flux cleaned = 0.00202143 Jy ! Component: 150 - total flux cleaned = 0.00174159 Jy ! Component: 200 - total flux cleaned = 0.00174205 Jy ! Component: 250 - total flux cleaned = 0.00136567 Jy ! Component: 300 - total flux cleaned = 0.000520583 Jy ! Component: 350 - total flux cleaned = -6.16723e-05 Jy ! Component: 400 - total flux cleaned = -0.000519194 Jy ! Component: 450 - total flux cleaned = -0.00107278 Jy ! Component: 500 - total flux cleaned = -0.00139714 Jy ! Component: 550 - total flux cleaned = -0.00202794 Jy ! Component: 600 - total flux cleaned = -0.00213037 Jy ! Component: 650 - total flux cleaned = -0.00243456 Jy ! Component: 700 - total flux cleaned = -0.00253535 Jy ! Component: 750 - total flux cleaned = -0.0030217 Jy ! Component: 800 - total flux cleaned = -0.00340147 Jy ! Component: 850 - total flux cleaned = -0.00340105 Jy ! Component: 900 - total flux cleaned = -0.0037685 Jy ! Component: 950 - total flux cleaned = -0.00394696 Jy ! Component: 1000 - total flux cleaned = -0.0040348 Jy ! Component: 1050 - total flux cleaned = -0.00420994 Jy ! Component: 1100 - total flux cleaned = -0.00438202 Jy ! Component: 1150 - total flux cleaned = -0.00472077 Jy ! Component: 1200 - total flux cleaned = -0.00505262 Jy ! Component: 1250 - total flux cleaned = -0.00505135 Jy ! Component: 1300 - total flux cleaned = -0.00513198 Jy ! Component: 1350 - total flux cleaned = -0.00521138 Jy ! Component: 1400 - total flux cleaned = -0.00528814 Jy ! Component: 1450 - total flux cleaned = -0.00513249 Jy ! Component: 1500 - total flux cleaned = -0.00513307 Jy ! Component: 1550 - total flux cleaned = -0.00505818 Jy ! Component: 1600 - total flux cleaned = -0.0052088 Jy ! Component: 1650 - total flux cleaned = -0.0053558 Jy ! Component: 1700 - total flux cleaned = -0.00535443 Jy ! Component: 1750 - total flux cleaned = -0.00521044 Jy ! Component: 1800 - total flux cleaned = -0.00535317 Jy ! Component: 1850 - total flux cleaned = -0.00549267 Jy ! Component: 1900 - total flux cleaned = -0.00549128 Jy ! Component: 1950 - total flux cleaned = -0.00549116 Jy ! Component: 2000 - total flux cleaned = -0.00542251 Jy ! Total flux subtracted in 2048 components = -0.00555816 Jy ! Clean residual min=-0.003345 max=0.004333 Jy/beam ! Clean residual mean=-0.000058 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.233525 Jy keep ! Adding 158 model components to the UV plane model. ! The established model now contains 313 components and 0.233525 Jy ![Exited script file: muppet] wmap "J0923-2135_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.357 x 7.79 at -13.8 degrees (North through East) ! Clean map min=-0.010283 max=0.14899 Jy/beam ! Writing clean map to FITS file: J0923-2135_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148989 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00151998 device "J0923-2135_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0923-2135_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.06058 3.06058 6.12116 12.2423 24.4846 48.9692 97.9385 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.357 x 7.79 at -13.8 degrees (North through East) ! Clean map min=-0.010283 max=0.14899 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0923-2135_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0923-2135_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0923-2135_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 17:14:02 2007