! Started logfile: J0923-2135_S_1997_07_02_yyk_uvs.log on Sun Jan 7 17:13:47 2007 obs J0923-2135_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0923-2135_S_1997_07_02_yyk_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.833177 visibilities/baseline/integration-bin. ! Found source: J0923-2135 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 21296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0923-2135_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.387616 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=7.991 mas, bpa=-0.8839 degrees ! Estimated noise=1666.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.144944 Jy ! Component: 100 - total flux cleaned = 0.180867 Jy ! Total flux subtracted in 100 components = 0.180867 Jy ! Clean residual min=-0.011693 max=0.013653 Jy/beam ! Clean residual mean=-0.000029 rms=0.003370 Jy/beam ! Combined flux in latest and established models = 0.180867 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.180867 Jy ! ! Correcting IF 1. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.344809Jy sigma=0.001224 ! Fit after self-cal, rms=0.344675Jy sigma=0.001223 ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=7.991 mas, bpa=-0.8836 degrees ! Estimated noise=1666.9 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.64 mas, bmaj=10.07 mas, bpa=-2.437 degrees ! Estimated noise=1304.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.014626 Jy ! Component: 100 - total flux cleaned = 0.0173791 Jy ! Component: 150 - total flux cleaned = 0.0171005 Jy ! Component: 200 - total flux cleaned = 0.0167164 Jy ! Total flux subtracted in 200 components = 0.0167164 Jy ! Clean residual min=-0.010998 max=0.014100 Jy/beam ! Clean residual mean=0.000067 rms=0.003439 Jy/beam ! Combined flux in latest and established models = 0.197583 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.197583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344043Jy sigma=0.001221 ! Fit after self-cal, rms=0.344043Jy sigma=0.001221 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.64 x 10.07 at -2.437 degrees (North through East) ! Clean map min=-0.010806 max=0.16689 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.344043Jy sigma=0.001221 ! Fit after self-cal, rms=0.344043Jy sigma=0.001221 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344043Jy sigma=0.001221 ! Fit after self-cal, rms=0.344043Jy sigma=0.001221 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.64 mas, bmaj=10.07 mas, bpa=-2.437 degrees ! Estimated noise=1304.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246603 Jy ! Component: 100 - total flux cleaned = -0.000557631 Jy ! Component: 150 - total flux cleaned = -0.000744002 Jy ! Component: 200 - total flux cleaned = -0.000918841 Jy ! Total flux subtracted in 200 components = -0.000918841 Jy ! Clean residual min=-0.011017 max=0.014109 Jy/beam ! Clean residual mean=0.000070 rms=0.003429 Jy/beam ! Combined flux in latest and established models = 0.196664 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.196664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343979Jy sigma=0.001221 ! Fit after self-cal, rms=0.343978Jy sigma=0.001221 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343978Jy sigma=0.001221 ! Fit after self-cal, rms=0.343027Jy sigma=0.001217 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245057 Jy ! Component: 100 - total flux cleaned = 0.00237034 Jy ! Component: 150 - total flux cleaned = 0.00216151 Jy ! Component: 200 - total flux cleaned = 0.00197473 Jy ! Total flux subtracted in 200 components = 0.00197473 Jy ! Clean residual min=-0.011675 max=0.013888 Jy/beam ! Clean residual mean=0.000086 rms=0.003380 Jy/beam ! Combined flux in latest and established models = 0.198639 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.198639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342943Jy sigma=0.001217 ! Fit after self-cal, rms=0.342739Jy sigma=0.001216 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.64 x 10.07 at -2.437 degrees (North through East) ! Clean map min=-0.010852 max=0.17185 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342739Jy sigma=0.001216 ! Fit after self-cal, rms=0.337207Jy sigma=0.001215 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337207Jy sigma=0.001215 ! Fit after self-cal, rms=0.337141Jy sigma=0.001215 ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=10.03 mas, bpa=-2.224 degrees ! Estimated noise=1290.33 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114176 Jy ! Component: 100 - total flux cleaned = -0.00125048 Jy ! Component: 150 - total flux cleaned = -0.00135244 Jy ! Component: 200 - total flux cleaned = -0.00148869 Jy ! Total flux subtracted in 200 components = -0.00148869 Jy ! Clean residual min=-0.010746 max=0.013646 Jy/beam ! Clean residual mean=0.000067 rms=0.003258 Jy/beam ! Combined flux in latest and established models = 0.19715 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.19715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337125Jy sigma=0.001215 ! Fit after self-cal, rms=0.337118Jy sigma=0.001215 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337118Jy sigma=0.001215 ! Fit after self-cal, rms=0.337230Jy sigma=0.001215 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337230Jy sigma=0.001215 ! Fit after self-cal, rms=0.337220Jy sigma=0.001215 ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=10.03 mas, bpa=-2.284 degrees ! Estimated noise=1288.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245672 Jy ! Component: 100 - total flux cleaned = -0.00032938 Jy ! Component: 150 - total flux cleaned = -0.000366269 Jy ! Component: 200 - total flux cleaned = -0.000465141 Jy ! Total flux subtracted in 200 components = -0.000465141 Jy ! Clean residual min=-0.010669 max=0.013711 Jy/beam ! Clean residual mean=0.000062 rms=0.003252 Jy/beam ! Combined flux in latest and established models = 0.196685 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.196685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337210Jy sigma=0.001215 ! Fit after self-cal, rms=0.337213Jy sigma=0.001215 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.173 mas, bmaj=17.87 mas, bpa=-1.888 degrees ! Estimated noise=1570.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.05208e-08 Jy ! Component: 100 - total flux cleaned = -1.01514e-06 Jy ! Component: 150 - total flux cleaned = -4.94431e-05 Jy ! Component: 200 - total flux cleaned = -7.06696e-05 Jy ! Total flux subtracted in 200 components = -7.06696e-05 Jy ! Clean residual min=-0.012309 max=0.021463 Jy/beam ! Clean residual mean=0.000121 rms=0.005223 Jy/beam ! Combined flux in latest and established models = 0.196615 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 63 components and 0.196615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337211Jy sigma=0.001215 ! Fit after self-cal, rms=0.337213Jy sigma=0.001215 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=7.981 mas, bpa=-0.692 degrees ! Estimated noise=1644.38 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.145297 Jy ! Component: 100 - total flux cleaned = 0.181907 Jy ! Component: 150 - total flux cleaned = 0.195847 Jy ! Component: 200 - total flux cleaned = 0.198409 Jy ! Total flux subtracted in 200 components = 0.198409 Jy ! Clean residual min=-0.010695 max=0.010773 Jy/beam ! Clean residual mean=-0.000058 rms=0.002902 Jy/beam ! Combined flux in latest and established models = 0.198409 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.198409 Jy ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=10.03 mas, bpa=-2.284 degrees ! Estimated noise=1288.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167994 Jy ! Component: 100 - total flux cleaned = 0.00114575 Jy ! Component: 150 - total flux cleaned = 0.000585413 Jy ! Component: 200 - total flux cleaned = 0.000194357 Jy ! Total flux subtracted in 200 components = 0.000194357 Jy ! Clean residual min=-0.010701 max=0.013459 Jy/beam ! Clean residual mean=0.000058 rms=0.003251 Jy/beam ! Combined flux in latest and established models = 0.198603 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.198603 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.173 mas, bmaj=17.87 mas, bpa=-1.888 degrees ! Estimated noise=1570.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000486087 Jy ! Component: 100 - total flux cleaned = -0.000673005 Jy ! Component: 150 - total flux cleaned = -0.000831104 Jy ! Component: 200 - total flux cleaned = -0.000964278 Jy ! Total flux subtracted in 200 components = -0.000964278 Jy ! Clean residual min=-0.012227 max=0.021457 Jy/beam ! Clean residual mean=0.000103 rms=0.005225 Jy/beam ! Combined flux in latest and established models = 0.197639 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.197639 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=10.03 mas, bpa=-2.284 degrees ! Estimated noise=1288.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000588431 Jy ! Component: 100 - total flux cleaned = -0.000524701 Jy ! Component: 150 - total flux cleaned = -0.000524179 Jy ! Component: 200 - total flux cleaned = -0.000564188 Jy ! Total flux subtracted in 200 components = -0.000564188 Jy ! Clean residual min=-0.010655 max=0.013628 Jy/beam ! Clean residual mean=0.000062 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 0.197075 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.197075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337225Jy sigma=0.001215 ! Fit after self-cal, rms=0.337232Jy sigma=0.001215 wmodel J0923-2135_S_1997_07_02_yyk\_map.mod ! Writing 51 model components to file: J0923-2135_S_1997_07_02_yyk_map.mod wobs J0923-2135_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0923-2135_S_1997_07_02_yyk_uvs.fits wwins J0923-2135_S_1997_07_02_yyk\_map.win ! wwins: Wrote 1 windows to J0923-2135_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587799 Jy ! Component: 100 - total flux cleaned = 0.0107988 Jy ! Component: 150 - total flux cleaned = 0.0147149 Jy ! Component: 200 - total flux cleaned = 0.0174411 Jy ! Component: 250 - total flux cleaned = 0.018567 Jy ! Component: 300 - total flux cleaned = 0.0190951 Jy ! Component: 350 - total flux cleaned = 0.0192208 Jy ! Component: 400 - total flux cleaned = 0.0196997 Jy ! Component: 450 - total flux cleaned = 0.0203897 Jy ! Component: 500 - total flux cleaned = 0.0209434 Jy ! Component: 550 - total flux cleaned = 0.0217954 Jy ! Component: 600 - total flux cleaned = 0.0224073 Jy ! Component: 650 - total flux cleaned = 0.0231947 Jy ! Component: 700 - total flux cleaned = 0.0238609 Jy ! Component: 750 - total flux cleaned = 0.0243237 Jy ! Component: 800 - total flux cleaned = 0.0248641 Jy ! Component: 850 - total flux cleaned = 0.0251261 Jy ! Component: 900 - total flux cleaned = 0.0252973 Jy ! Component: 950 - total flux cleaned = 0.025463 Jy ! Component: 1000 - total flux cleaned = 0.0256251 Jy ! Component: 1050 - total flux cleaned = 0.0257041 Jy ! Component: 1100 - total flux cleaned = 0.0258608 Jy ! Component: 1150 - total flux cleaned = 0.0261634 Jy ! Component: 1200 - total flux cleaned = 0.0263117 Jy ! Component: 1250 - total flux cleaned = 0.0266019 Jy ! Component: 1300 - total flux cleaned = 0.0269581 Jy ! Component: 1350 - total flux cleaned = 0.0272382 Jy ! Component: 1400 - total flux cleaned = 0.0276505 Jy ! Component: 1450 - total flux cleaned = 0.0278524 Jy ! Component: 1500 - total flux cleaned = 0.0281178 Jy ! Component: 1550 - total flux cleaned = 0.028379 Jy ! Component: 1600 - total flux cleaned = 0.0287648 Jy ! Component: 1650 - total flux cleaned = 0.0292057 Jy ! Component: 1700 - total flux cleaned = 0.0294527 Jy ! Component: 1750 - total flux cleaned = 0.0298197 Jy ! Component: 1800 - total flux cleaned = 0.0302408 Jy ! Component: 1850 - total flux cleaned = 0.0306544 Jy ! Component: 1900 - total flux cleaned = 0.0308291 Jy ! Component: 1950 - total flux cleaned = 0.0312878 Jy ! Component: 2000 - total flux cleaned = 0.0315705 Jy ! Total flux subtracted in 2048 components = 0.0319606 Jy ! Clean residual min=-0.005104 max=0.004214 Jy/beam ! Clean residual mean=-0.000022 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.229036 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 202 components and 0.229036 Jy ![Exited script file: muppet] wmap "J0923-2135_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.613 x 10.03 at -2.284 degrees (North through East) ! Clean map min=-0.0065388 max=0.17048 Jy/beam ! Writing clean map to FITS file: J0923-2135_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.170481 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00118852 device "J0923-2135_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0923-2135_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.09148 2.09148 4.18295 8.36591 16.7318 33.4636 66.9273 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.613 x 10.03 at -2.284 degrees (North through East) ! Clean map min=-0.0065388 max=0.17048 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0923-2135_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0923-2135_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0923-2135_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 17:13:54 2007