! Started logfile: J0921-2618_S_1997_07_02_yyk_uvs.log on Sun Jan 7 17:13:25 2007 obs J0921-2618_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0921-2618_S_1997_07_02_yyk_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784771 visibilities/baseline/integration-bin. ! Found source: J0921-2618 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 20200 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0921-2618_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.26428 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=8.017 mas, bpa=-3.254 degrees ! Estimated noise=2275.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.913559 Jy ! Component: 100 - total flux cleaned = 1.20725 Jy ! Total flux subtracted in 100 components = 1.20725 Jy ! Clean residual min=-0.045329 max=0.092971 Jy/beam ! Clean residual mean=0.000849 rms=0.017318 Jy/beam ! Combined flux in latest and established models = 1.20725 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.20725 Jy ! ! Correcting IF 1. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.464698Jy sigma=0.001614 ! Fit after self-cal, rms=0.463174Jy sigma=0.001611 ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=8.017 mas, bpa=-3.254 degrees ! Estimated noise=2275.67 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.584 mas, bmaj=10.2 mas, bpa=-3.061 degrees ! Estimated noise=1401.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.1984 Jy ! Component: 100 - total flux cleaned = 0.271328 Jy ! Component: 150 - total flux cleaned = 0.302507 Jy ! Component: 200 - total flux cleaned = 0.316118 Jy ! Total flux subtracted in 200 components = 0.316118 Jy ! Clean residual min=-0.034718 max=0.061822 Jy/beam ! Clean residual mean=0.000718 rms=0.013756 Jy/beam ! Combined flux in latest and established models = 1.52337 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 48 components and 1.52337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.406134Jy sigma=0.001392 ! Fit after self-cal, rms=0.406005Jy sigma=0.001392 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.584 x 10.2 at -3.061 degrees (North through East) ! Clean map min=-0.034276 max=1.0949 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01189 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.11 HN 0.99 KP 0.89 ! LA 0.99 MK 1.05 NL 1.00* OV 1.09 ! PT 0.94 SC 0.83 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.969727 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.15 HN 1.08 KP 0.94 ! LA 1.08 MK 1.10 NL 1.02 OV 1.05 ! PT 0.92 SC 0.91 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03843 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 1.01 KP 0.90 ! LA 0.81 MK 0.87 NL 0.97 OV 0.95 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.99094 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.10 HN 1.23 KP 0.93 ! LA 0.89 MK 1.02 NL 1.11 OV 0.96 ! PT 0.91 SC 0.94 ! ! ! Fit before self-cal, rms=0.406005Jy sigma=0.001392 ! Fit after self-cal, rms=0.376085Jy sigma=0.001297 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376085Jy sigma=0.001297 ! Fit after self-cal, rms=0.376122Jy sigma=0.001297 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.553 mas, bmaj=9.976 mas, bpa=-1.132 degrees ! Estimated noise=1389.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236126 Jy ! Component: 100 - total flux cleaned = 0.026591 Jy ! Component: 150 - total flux cleaned = 0.0265195 Jy ! Component: 200 - total flux cleaned = 0.0265272 Jy ! Total flux subtracted in 200 components = 0.0265272 Jy ! Clean residual min=-0.013631 max=0.016794 Jy/beam ! Clean residual mean=0.000131 rms=0.004106 Jy/beam ! Combined flux in latest and established models = 1.54989 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 1.54989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371317Jy sigma=0.001281 ! Fit after self-cal, rms=0.370659Jy sigma=0.001279 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370659Jy sigma=0.001279 ! Fit after self-cal, rms=0.359106Jy sigma=0.001232 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107044 Jy ! Component: 100 - total flux cleaned = 0.0107156 Jy ! Component: 150 - total flux cleaned = 0.0107037 Jy ! Component: 200 - total flux cleaned = 0.0103174 Jy ! Total flux subtracted in 200 components = 0.0103174 Jy ! Clean residual min=-0.012443 max=0.012810 Jy/beam ! Clean residual mean=0.000130 rms=0.003708 Jy/beam ! Combined flux in latest and established models = 1.56021 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 95 components and 1.56021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357805Jy sigma=0.001228 ! Fit after self-cal, rms=0.356431Jy sigma=0.001223 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.553 x 9.976 at -1.132 degrees (North through East) ! Clean map min=-0.012619 max=1.0885 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356431Jy sigma=0.001223 ! Fit after self-cal, rms=0.345198Jy sigma=0.001195 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345198Jy sigma=0.001195 ! Fit after self-cal, rms=0.344954Jy sigma=0.001194 ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=10.03 mas, bpa=-1.706 degrees ! Estimated noise=1384.67 mJy/beam. ! Added new window around map position (-34, 62). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170945 Jy ! Component: 100 - total flux cleaned = 0.0206692 Jy ! Component: 150 - total flux cleaned = 0.0218462 Jy ! Component: 200 - total flux cleaned = 0.0220926 Jy ! Total flux subtracted in 200 components = 0.0220926 Jy ! Clean residual min=-0.007652 max=0.008795 Jy/beam ! Clean residual mean=0.000085 rms=0.002412 Jy/beam ! Combined flux in latest and established models = 1.5823 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 1.5823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344087Jy sigma=0.001191 ! Fit after self-cal, rms=0.343911Jy sigma=0.001190 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343911Jy sigma=0.001190 ! Fit after self-cal, rms=0.342643Jy sigma=0.001188 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342643Jy sigma=0.001188 ! Fit after self-cal, rms=0.342613Jy sigma=0.001188 ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=10.04 mas, bpa=-1.746 degrees ! Estimated noise=1384.71 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819676 Jy ! Component: 100 - total flux cleaned = 0.00964406 Jy ! Component: 150 - total flux cleaned = 0.00985817 Jy ! Component: 200 - total flux cleaned = 0.0100511 Jy ! Total flux subtracted in 200 components = 0.0100511 Jy ! Clean residual min=-0.007144 max=0.007213 Jy/beam ! Clean residual mean=0.000058 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 1.59235 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 139 components and 1.59235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342275Jy sigma=0.001187 ! Fit after self-cal, rms=0.342220Jy sigma=0.001187 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.335 mas, bmaj=20.3 mas, bpa=-0.5805 degrees ! Estimated noise=1698.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222936 Jy ! Component: 100 - total flux cleaned = 0.00212832 Jy ! Component: 150 - total flux cleaned = 0.00178535 Jy ! Component: 200 - total flux cleaned = 0.00138658 Jy ! Total flux subtracted in 200 components = 0.00138658 Jy ! Clean residual min=-0.006183 max=0.006261 Jy/beam ! Clean residual mean=0.000090 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 1.59374 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 155 components and 1.59374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342152Jy sigma=0.001187 ! Fit after self-cal, rms=0.342118Jy sigma=0.001186 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=7.94 mas, bpa=-2.336 degrees ! Estimated noise=2255.38 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.911479 Jy ! Component: 100 - total flux cleaned = 1.20758 Jy ! Component: 150 - total flux cleaned = 1.34878 Jy ! Component: 200 - total flux cleaned = 1.42922 Jy ! Total flux subtracted in 200 components = 1.42922 Jy ! Clean residual min=-0.018074 max=0.030837 Jy/beam ! Clean residual mean=0.000291 rms=0.006084 Jy/beam ! Combined flux in latest and established models = 1.42922 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 1.42922 Jy ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=10.04 mas, bpa=-1.746 degrees ! Estimated noise=1384.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0802006 Jy ! Component: 100 - total flux cleaned = 0.116854 Jy ! Component: 150 - total flux cleaned = 0.137233 Jy ! Component: 200 - total flux cleaned = 0.149549 Jy ! Total flux subtracted in 200 components = 0.149549 Jy ! Clean residual min=-0.006224 max=0.007386 Jy/beam ! Clean residual mean=0.000170 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 1.57877 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 105 components and 1.57877 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.335 mas, bmaj=20.3 mas, bpa=-0.5805 degrees ! Estimated noise=1698.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102518 Jy ! Component: 100 - total flux cleaned = 0.0117378 Jy ! Component: 150 - total flux cleaned = 0.0123374 Jy ! Component: 200 - total flux cleaned = 0.0128612 Jy ! Total flux subtracted in 200 components = 0.0128612 Jy ! Clean residual min=-0.005968 max=0.006887 Jy/beam ! Clean residual mean=0.000129 rms=0.002220 Jy/beam ! Combined flux in latest and established models = 1.59163 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 139 components and 1.59163 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=10.04 mas, bpa=-1.746 degrees ! Estimated noise=1384.71 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145455 Jy ! Component: 100 - total flux cleaned = -0.000461955 Jy ! Component: 150 - total flux cleaned = -0.000608083 Jy ! Component: 200 - total flux cleaned = -0.00074525 Jy ! Total flux subtracted in 200 components = -0.00074525 Jy ! Clean residual min=-0.005931 max=0.006406 Jy/beam ! Clean residual mean=0.000066 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 1.59088 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 161 components and 1.59088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341764Jy sigma=0.001185 ! Fit after self-cal, rms=0.341660Jy sigma=0.001185 wmodel J0921-2618_S_1997_07_02_yyk\_map.mod ! Writing 161 model components to file: J0921-2618_S_1997_07_02_yyk_map.mod wobs J0921-2618_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0921-2618_S_1997_07_02_yyk_uvs.fits wwins J0921-2618_S_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J0921-2618_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000536631 Jy ! Component: 100 - total flux cleaned = -0.00148884 Jy ! Component: 150 - total flux cleaned = -0.00183819 Jy ! Component: 200 - total flux cleaned = -0.00216586 Jy ! Component: 250 - total flux cleaned = -0.00248366 Jy ! Component: 300 - total flux cleaned = -0.0026369 Jy ! Component: 350 - total flux cleaned = -0.00270973 Jy ! Component: 400 - total flux cleaned = -0.00256377 Jy ! Component: 450 - total flux cleaned = -0.00249501 Jy ! Component: 500 - total flux cleaned = -0.00249564 Jy ! Component: 550 - total flux cleaned = -0.00236341 Jy ! Component: 600 - total flux cleaned = -0.0023004 Jy ! Component: 650 - total flux cleaned = -0.00255355 Jy ! Component: 700 - total flux cleaned = -0.00255194 Jy ! Component: 750 - total flux cleaned = -0.00236979 Jy ! Component: 800 - total flux cleaned = -0.00225268 Jy ! Component: 850 - total flux cleaned = -0.0022528 Jy ! Component: 900 - total flux cleaned = -0.00196528 Jy ! Component: 950 - total flux cleaned = -0.00162731 Jy ! Component: 1000 - total flux cleaned = -0.00129514 Jy ! Component: 1050 - total flux cleaned = -0.00118725 Jy ! Component: 1100 - total flux cleaned = -0.00097347 Jy ! Component: 1150 - total flux cleaned = -0.000604754 Jy ! Component: 1200 - total flux cleaned = -0.000398404 Jy ! Component: 1250 - total flux cleaned = -0.000245294 Jy ! Component: 1300 - total flux cleaned = 0.000107651 Jy ! Component: 1350 - total flux cleaned = 0.000405019 Jy ! Component: 1400 - total flux cleaned = 0.000553051 Jy ! Component: 1450 - total flux cleaned = 0.000891929 Jy ! Component: 1500 - total flux cleaned = 0.00117778 Jy ! Component: 1550 - total flux cleaned = 0.001319 Jy ! Component: 1600 - total flux cleaned = 0.00159749 Jy ! Component: 1650 - total flux cleaned = 0.00168856 Jy ! Component: 1700 - total flux cleaned = 0.00195957 Jy ! Component: 1750 - total flux cleaned = 0.00209368 Jy ! Component: 1800 - total flux cleaned = 0.00222646 Jy ! Component: 1850 - total flux cleaned = 0.00226988 Jy ! Component: 1900 - total flux cleaned = 0.002356 Jy ! Component: 1950 - total flux cleaned = 0.00231369 Jy ! Component: 2000 - total flux cleaned = 0.00260809 Jy ! Total flux subtracted in 2048 components = 0.00256683 Jy ! Clean residual min=-0.002359 max=0.002961 Jy/beam ! Clean residual mean=0.000049 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 1.59345 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 294 components and 1.59345 Jy ![Exited script file: muppet] wmap "J0921-2618_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.564 x 10.04 at -1.746 degrees (North through East) ! Clean map min=-0.0061791 max=1.0989 Jy/beam ! Writing clean map to FITS file: J0921-2618_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.09887 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000895894 device "J0921-2618_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0921-2618_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.244585 0.244585 0.489171 0.978342 1.95668 3.91337 7.82674 15.6535 31.3069 62.6139 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.564 x 10.04 at -1.746 degrees (North through East) ! Clean map min=-0.0061791 max=1.0989 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0921-2618_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0921-2618_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0921-2618_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 17:13:33 2007