! Started logfile: J0836-2233_X_1997_07_02_yyk_uvs.log on Mon Jan 8 04:10:43 2007 obs J0836-2233_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0836-2233_X_1997_07_02_yyk_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.889962 visibilities/baseline/integration-bin. ! Found source: J0836-2233 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 23228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0836-2233_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.242271 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7346 mas, bmaj=2.207 mas, bpa=0.8913 degrees ! Estimated noise=1368.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0842934 Jy ! Component: 100 - total flux cleaned = 0.105945 Jy ! Total flux subtracted in 100 components = 0.105945 Jy ! Clean residual min=-0.007877 max=0.012638 Jy/beam ! Clean residual mean=-0.000021 rms=0.002549 Jy/beam ! Combined flux in latest and established models = 0.105945 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.105945 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.217226Jy sigma=0.001289 ! Fit after self-cal, rms=0.217119Jy sigma=0.001289 ! Inverting map and beam ! Estimated beam: bmin=0.7346 mas, bmaj=2.207 mas, bpa=0.8913 degrees ! Estimated noise=1368.78 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9449 mas, bmaj=2.651 mas, bpa=-0.06457 degrees ! Estimated noise=745.296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210808 Jy ! Component: 100 - total flux cleaned = 0.0301909 Jy ! Component: 150 - total flux cleaned = 0.0343798 Jy ! Component: 200 - total flux cleaned = 0.0351856 Jy ! Total flux subtracted in 200 components = 0.0351856 Jy ! Clean residual min=-0.008594 max=0.019056 Jy/beam ! Clean residual mean=-0.000053 rms=0.003540 Jy/beam ! Combined flux in latest and established models = 0.14113 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.14113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216187Jy sigma=0.001280 ! Fit after self-cal, rms=0.216184Jy sigma=0.001280 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9449 x 2.651 at -0.06457 degrees (North through East) ! Clean map min=-0.0086234 max=0.096607 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.216184Jy sigma=0.001280 ! Fit after self-cal, rms=0.216184Jy sigma=0.001280 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216184Jy sigma=0.001280 ! Fit after self-cal, rms=0.216184Jy sigma=0.001280 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9449 mas, bmaj=2.651 mas, bpa=-0.06457 degrees ! Estimated noise=745.296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.2, 0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230303 Jy ! Component: 100 - total flux cleaned = 0.0329058 Jy ! Component: 150 - total flux cleaned = 0.0377131 Jy ! Component: 200 - total flux cleaned = 0.0397575 Jy ! Total flux subtracted in 200 components = 0.0397575 Jy ! Clean residual min=-0.007211 max=0.008888 Jy/beam ! Clean residual mean=-0.000039 rms=0.002175 Jy/beam ! Combined flux in latest and established models = 0.180888 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 76 components and 0.180888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214954Jy sigma=0.001269 ! Fit after self-cal, rms=0.214773Jy sigma=0.001268 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214773Jy sigma=0.001268 ! Fit after self-cal, rms=0.213047Jy sigma=0.001257 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.4, 3.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117394 Jy ! Component: 100 - total flux cleaned = 0.0172853 Jy ! Component: 150 - total flux cleaned = 0.020798 Jy ! Component: 200 - total flux cleaned = 0.0222625 Jy ! Total flux subtracted in 200 components = 0.0222625 Jy ! Clean residual min=-0.005541 max=0.005431 Jy/beam ! Clean residual mean=-0.000036 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.20315 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 119 components and 0.20315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212611Jy sigma=0.001254 ! Fit after self-cal, rms=0.212322Jy sigma=0.001252 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9449 x 2.651 at -0.06457 degrees (North through East) ! Clean map min=-0.0050796 max=0.099093 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=5.208 mas, bpa=-0.6795 degrees ! Estimated noise=929.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618692 Jy ! Component: 100 - total flux cleaned = 0.00924799 Jy ! Component: 150 - total flux cleaned = 0.0101124 Jy ! Component: 200 - total flux cleaned = 0.0103593 Jy ! Total flux subtracted in 200 components = 0.0103593 Jy ! Clean residual min=-0.005806 max=0.005035 Jy/beam ! Clean residual mean=-0.000055 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.213509 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 150 components and 0.213509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212266Jy sigma=0.001252 ! Fit after self-cal, rms=0.212166Jy sigma=0.001251 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7346 mas, bmaj=2.207 mas, bpa=0.8913 degrees ! Estimated noise=1368.78 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0870445 Jy ! Component: 100 - total flux cleaned = 0.113428 Jy ! Component: 150 - total flux cleaned = 0.131542 Jy ! Component: 200 - total flux cleaned = 0.144927 Jy ! Total flux subtracted in 200 components = 0.144927 Jy ! Clean residual min=-0.006018 max=0.007180 Jy/beam ! Clean residual mean=-0.000020 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.144927 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.144927 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9449 mas, bmaj=2.651 mas, bpa=-0.06457 degrees ! Estimated noise=745.296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198155 Jy ! Component: 100 - total flux cleaned = 0.0329595 Jy ! Component: 150 - total flux cleaned = 0.0422623 Jy ! Component: 200 - total flux cleaned = 0.0490409 Jy ! Total flux subtracted in 200 components = 0.0490409 Jy ! Clean residual min=-0.004231 max=0.005005 Jy/beam ! Clean residual mean=-0.000041 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.193968 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 97 components and 0.193968 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=5.208 mas, bpa=-0.6795 degrees ! Estimated noise=929.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0084387 Jy ! Component: 100 - total flux cleaned = 0.0134917 Jy ! Component: 150 - total flux cleaned = 0.0167951 Jy ! Component: 200 - total flux cleaned = 0.0190663 Jy ! Total flux subtracted in 200 components = 0.0190663 Jy ! Clean residual min=-0.005294 max=0.005216 Jy/beam ! Clean residual mean=-0.000055 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.213034 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 127 components and 0.213034 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9449 mas, bmaj=2.651 mas, bpa=-0.06457 degrees ! Estimated noise=745.296 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242167 Jy ! Component: 100 - total flux cleaned = 0.00071648 Jy ! Component: 150 - total flux cleaned = 0.000956352 Jy ! Component: 200 - total flux cleaned = 0.0011209 Jy ! Total flux subtracted in 200 components = 0.0011209 Jy ! Clean residual min=-0.004199 max=0.003869 Jy/beam ! Clean residual mean=-0.000031 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.214155 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 149 components and 0.214155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212065Jy sigma=0.001251 ! Fit after self-cal, rms=0.211996Jy sigma=0.001250 wmodel J0836-2233_X_1997_07_02_yyk\_map.mod ! Writing 149 model components to file: J0836-2233_X_1997_07_02_yyk_map.mod wobs J0836-2233_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0836-2233_X_1997_07_02_yyk_uvs.fits wwins J0836-2233_X_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J0836-2233_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000418348 Jy ! Component: 100 - total flux cleaned = -0.000962655 Jy ! Component: 150 - total flux cleaned = -0.00159905 Jy ! Component: 200 - total flux cleaned = -0.0018984 Jy ! Component: 250 - total flux cleaned = -0.00212823 Jy ! Component: 300 - total flux cleaned = -0.00245756 Jy ! Component: 350 - total flux cleaned = -0.0027206 Jy ! Component: 400 - total flux cleaned = -0.00282223 Jy ! Component: 450 - total flux cleaned = -0.00272422 Jy ! Component: 500 - total flux cleaned = -0.00281995 Jy ! Component: 550 - total flux cleaned = -0.00263338 Jy ! Component: 600 - total flux cleaned = -0.00258846 Jy ! Component: 650 - total flux cleaned = -0.00254233 Jy ! Component: 700 - total flux cleaned = -0.00236657 Jy ! Component: 750 - total flux cleaned = -0.00198095 Jy ! Component: 800 - total flux cleaned = -0.00168753 Jy ! Component: 850 - total flux cleaned = -0.00135901 Jy ! Component: 900 - total flux cleaned = -0.00107607 Jy ! Component: 950 - total flux cleaned = -0.000718615 Jy ! Component: 1000 - total flux cleaned = -0.000484783 Jy ! Component: 1050 - total flux cleaned = -0.000138916 Jy ! Component: 1100 - total flux cleaned = 0.000163657 Jy ! Component: 1150 - total flux cleaned = 0.000386902 Jy ! Component: 1200 - total flux cleaned = 0.000716752 Jy ! Component: 1250 - total flux cleaned = 0.000897944 Jy ! Component: 1300 - total flux cleaned = 0.00104012 Jy ! Component: 1350 - total flux cleaned = 0.00107527 Jy ! Component: 1400 - total flux cleaned = 0.0012132 Jy ! Component: 1450 - total flux cleaned = 0.00124724 Jy ! Component: 1500 - total flux cleaned = 0.0014145 Jy ! Component: 1550 - total flux cleaned = 0.00131548 Jy ! Component: 1600 - total flux cleaned = 0.00147904 Jy ! Component: 1650 - total flux cleaned = 0.00154384 Jy ! Component: 1700 - total flux cleaned = 0.00160733 Jy ! Component: 1750 - total flux cleaned = 0.00163875 Jy ! Component: 1800 - total flux cleaned = 0.00173152 Jy ! Component: 1850 - total flux cleaned = 0.00166963 Jy ! Component: 1900 - total flux cleaned = 0.00167005 Jy ! Component: 1950 - total flux cleaned = 0.00170017 Jy ! Component: 2000 - total flux cleaned = 0.00167028 Jy ! Total flux subtracted in 2048 components = 0.00164119 Jy ! Clean residual min=-0.001865 max=0.001506 Jy/beam ! Clean residual mean=-0.000013 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.215796 Jy keep ! Adding 157 model components to the UV plane model. ! The established model now contains 306 components and 0.215796 Jy ![Exited script file: muppet] wmap "J0836-2233_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9449 x 2.651 at -0.06457 degrees (North through East) ! Clean map min=-0.0032851 max=0.10174 Jy/beam ! Writing clean map to FITS file: J0836-2233_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101739 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000594877 device "J0836-2233_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0836-2233_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.75412 1.75412 3.50824 7.01647 14.0329 28.0659 56.1318 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9449 x 2.651 at -0.06457 degrees (North through East) ! Clean map min=-0.0032851 max=0.10174 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0836-2233_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0836-2233_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0836-2233_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 04:10:52 2007