! Started logfile: J0821-0323_X_1997_05_07_yyk_uvs.log on Mon Jan  8 04:02:59 2007
obs J0821-0323_X_1997_05_07_yyk_uva.fits
! Reading UV FITS file: J0821-0323_X_1997_05_07_yyk_uva.fits
! AN table 1: 102 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.61329 visibilities/baseline/integration-bin.
! Found source: J0821-0323
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 614 lines of history.
! 
! Reading 11260 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0821-0323_X_1997_05_07_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.241504 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6681 mas, bmaj=1.839 mas, bpa=-2.954 degrees
! Estimated noise=1530.69 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.05146 Jy
! Component: 100  -  total flux cleaned = 0.0739361 Jy
! Total flux subtracted in 100 components = 0.0739361 Jy
! Clean residual min=-0.017678 max=0.020869 Jy/beam
! Clean residual mean=-0.000112 rms=0.004559 Jy/beam
! Combined flux in latest and established models = 0.0739361 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0739361 Jy
! 
! Correcting IF 1.
!  A total of 361 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 306 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 306 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 306 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.230830Jy  sigma=0.001441
! Fit after  self-cal, rms=0.228899Jy  sigma=0.001437
! Inverting map and beam 
! Estimated beam: bmin=0.6682 mas, bmaj=1.839 mas, bpa=-2.953 degrees
! Estimated noise=1537.94 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8006 mas, bmaj=2.131 mas, bpa=-2.793 degrees
! Estimated noise=994.815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0296849 Jy
! Component: 100  -  total flux cleaned = 0.04222 Jy
! Component: 150  -  total flux cleaned = 0.0483507 Jy
! Component: 200  -  total flux cleaned = 0.051501 Jy
! Total flux subtracted in 200 components = 0.051501 Jy
! Clean residual min=-0.012242 max=0.026494 Jy/beam
! Clean residual mean=-0.000101 rms=0.004471 Jy/beam
! Combined flux in latest and established models = 0.125437 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 55 components and 0.125437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227229Jy  sigma=0.001418
! Fit after  self-cal, rms=0.227227Jy  sigma=0.001418
! Inverting map 
! Added new window around map position (5.6, -1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0258092 Jy
! Component: 100  -  total flux cleaned = 0.0327175 Jy
! Component: 150  -  total flux cleaned = 0.0351371 Jy
! Component: 200  -  total flux cleaned = 0.0362205 Jy
! Total flux subtracted in 200 components = 0.0362205 Jy
! Clean residual min=-0.010388 max=0.012992 Jy/beam
! Clean residual mean=-0.000062 rms=0.003061 Jy/beam
! Combined flux in latest and established models = 0.161658 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 79 components and 0.161658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.225566Jy  sigma=0.001403
! Fit after  self-cal, rms=0.225161Jy  sigma=0.001399
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8006 x 2.131 at -2.793 degrees (North through East)
! Clean map  min=-0.0080498  max=0.065547 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.225161Jy  sigma=0.001399
! Fit after  self-cal, rms=0.223168Jy  sigma=0.001400
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223168Jy  sigma=0.001400
! Fit after  self-cal, rms=0.223140Jy  sigma=0.001400
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8018 mas, bmaj=2.139 mas, bpa=-2.649 degrees
! Estimated noise=997.33 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101889 Jy
! Component: 100  -  total flux cleaned = 0.0125289 Jy
! Component: 150  -  total flux cleaned = 0.0129187 Jy
! Component: 200  -  total flux cleaned = 0.0133686 Jy
! Total flux subtracted in 200 components = 0.0133686 Jy
! Clean residual min=-0.008047 max=0.008042 Jy/beam
! Clean residual mean=-0.000039 rms=0.002293 Jy/beam
! Combined flux in latest and established models = 0.175026 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 98 components and 0.175026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222885Jy  sigma=0.001397
! Fit after  self-cal, rms=0.222824Jy  sigma=0.001397
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222824Jy  sigma=0.001397
! Fit after  self-cal, rms=0.221750Jy  sigma=0.001389
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00590271 Jy
! Component: 100  -  total flux cleaned = 0.00660843 Jy
! Component: 150  -  total flux cleaned = 0.00675184 Jy
! Component: 200  -  total flux cleaned = 0.00687704 Jy
! Total flux subtracted in 200 components = 0.00687704 Jy
! Clean residual min=-0.007135 max=0.008592 Jy/beam
! Clean residual mean=-0.000027 rms=0.002153 Jy/beam
! Combined flux in latest and established models = 0.181903 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 113 components and 0.181903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.221597Jy  sigma=0.001388
! Fit after  self-cal, rms=0.221410Jy  sigma=0.001386
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8018 x 2.139 at -2.649 degrees (North through East)
! Clean map  min=-0.0069884  max=0.066534 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.284 mas, bmaj=3.873 mas, bpa=7.726 degrees
! Estimated noise=1358.18 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00596116 Jy
! Component: 100  -  total flux cleaned = 0.00788608 Jy
! Component: 150  -  total flux cleaned = 0.00818252 Jy
! Component: 200  -  total flux cleaned = 0.00852023 Jy
! Total flux subtracted in 200 components = 0.00852023 Jy
! Clean residual min=-0.010794 max=0.008385 Jy/beam
! Clean residual mean=-0.000032 rms=0.003191 Jy/beam
! Combined flux in latest and established models = 0.190423 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 121 components and 0.190423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.221447Jy  sigma=0.001387
! Fit after  self-cal, rms=0.221378Jy  sigma=0.001386
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6673 mas, bmaj=1.854 mas, bpa=-2.536 degrees
! Estimated noise=1511.54 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.065347 Jy
! Component: 100  -  total flux cleaned = 0.0982333 Jy
! Component: 150  -  total flux cleaned = 0.117683 Jy
! Component: 200  -  total flux cleaned = 0.130558 Jy
! Total flux subtracted in 200 components = 0.130558 Jy
! Clean residual min=-0.010318 max=0.012936 Jy/beam
! Clean residual mean=-0.000048 rms=0.002809 Jy/beam
! Combined flux in latest and established models = 0.130558 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.130558 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8018 mas, bmaj=2.139 mas, bpa=-2.649 degrees
! Estimated noise=997.33 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.8, 10).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210112 Jy
! Component: 100  -  total flux cleaned = 0.0328817 Jy
! Component: 150  -  total flux cleaned = 0.0410184 Jy
! Component: 200  -  total flux cleaned = 0.0459186 Jy
! Total flux subtracted in 200 components = 0.0459186 Jy
! Clean residual min=-0.007747 max=0.007868 Jy/beam
! Clean residual mean=-0.000038 rms=0.002254 Jy/beam
! Combined flux in latest and established models = 0.176477 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 72 components and 0.176477 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.284 mas, bmaj=3.873 mas, bpa=7.726 degrees
! Estimated noise=1358.18 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0093399 Jy
! Component: 100  -  total flux cleaned = 0.012374 Jy
! Component: 150  -  total flux cleaned = 0.0126922 Jy
! Component: 200  -  total flux cleaned = 0.0129719 Jy
! Total flux subtracted in 200 components = 0.0129719 Jy
! Clean residual min=-0.009903 max=0.009327 Jy/beam
! Clean residual mean=-0.000032 rms=0.003279 Jy/beam
! Combined flux in latest and established models = 0.189449 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.189449 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8018 mas, bmaj=2.139 mas, bpa=-2.649 degrees
! Estimated noise=997.33 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00146467 Jy
! Component: 100  -  total flux cleaned = -0.00195101 Jy
! Component: 150  -  total flux cleaned = -0.00223204 Jy
! Component: 200  -  total flux cleaned = -0.00235441 Jy
! Total flux subtracted in 200 components = -0.00235441 Jy
! Clean residual min=-0.007151 max=0.006928 Jy/beam
! Clean residual mean=-0.000014 rms=0.001972 Jy/beam
! Combined flux in latest and established models = 0.187094 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 111 components and 0.187094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220942Jy  sigma=0.001384
! Fit after  self-cal, rms=0.220868Jy  sigma=0.001383
wmodel J0821-0323_X_1997_05_07_yyk\_map.mod
! Writing 111 model components to file: J0821-0323_X_1997_05_07_yyk_map.mod
wobs J0821-0323_X_1997_05_07_yyk\_uvs.fits
! Writing UV FITS file: J0821-0323_X_1997_05_07_yyk_uvs.fits
wwins J0821-0323_X_1997_05_07_yyk\_map.win
! wwins: Wrote 3 windows to J0821-0323_X_1997_05_07_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000513447 Jy
! Component: 100  -  total flux cleaned = -0.00109482 Jy
! Component: 150  -  total flux cleaned = -0.0016403 Jy
! Component: 200  -  total flux cleaned = -0.00205001 Jy
! Component: 250  -  total flux cleaned = -0.00234202 Jy
! Component: 300  -  total flux cleaned = -0.00262069 Jy
! Component: 350  -  total flux cleaned = -0.00297679 Jy
! Component: 400  -  total flux cleaned = -0.00348316 Jy
! Component: 450  -  total flux cleaned = -0.00380294 Jy
! Component: 500  -  total flux cleaned = -0.00418911 Jy
! Component: 550  -  total flux cleaned = -0.004338 Jy
! Component: 600  -  total flux cleaned = -0.00426766 Jy
! Component: 650  -  total flux cleaned = -0.00440537 Jy
! Component: 700  -  total flux cleaned = -0.00440672 Jy
! Component: 750  -  total flux cleaned = -0.00421387 Jy
! Component: 800  -  total flux cleaned = -0.00402492 Jy
! Component: 850  -  total flux cleaned = -0.00365725 Jy
! Component: 900  -  total flux cleaned = -0.00335995 Jy
! Component: 950  -  total flux cleaned = -0.00312772 Jy
! Component: 1000  -  total flux cleaned = -0.00278723 Jy
! Component: 1050  -  total flux cleaned = -0.0026204 Jy
! Component: 1100  -  total flux cleaned = -0.00223808 Jy
! Component: 1150  -  total flux cleaned = -0.00181147 Jy
! Component: 1200  -  total flux cleaned = -0.00144683 Jy
! Component: 1250  -  total flux cleaned = -0.00119116 Jy
! Component: 1300  -  total flux cleaned = -0.00109102 Jy
! Component: 1350  -  total flux cleaned = -0.000943078 Jy
! Component: 1400  -  total flux cleaned = -0.000557003 Jy
! Component: 1450  -  total flux cleaned = -0.000272167 Jy
! Component: 1500  -  total flux cleaned = 0.000101076 Jy
! Component: 1550  -  total flux cleaned = 0.000422715 Jy
! Component: 1600  -  total flux cleaned = 0.000784702 Jy
! Component: 1650  -  total flux cleaned = 0.00109583 Jy
! Component: 1700  -  total flux cleaned = 0.00149112 Jy
! Component: 1750  -  total flux cleaned = 0.00188005 Jy
! Component: 1800  -  total flux cleaned = 0.00222086 Jy
! Component: 1850  -  total flux cleaned = 0.00251594 Jy
! Component: 1900  -  total flux cleaned = 0.00284773 Jy
! Component: 1950  -  total flux cleaned = 0.0030928 Jy
! Component: 2000  -  total flux cleaned = 0.00329528 Jy
! Total flux subtracted in 2048 components = 0.00349563 Jy
! Clean residual min=-0.002305 max=0.002335 Jy/beam
! Clean residual mean=-0.000010 rms=0.000759 Jy/beam
! Combined flux in latest and established models = 0.19059 Jy
keep
! Adding 133 model components to the UV plane model.
! The established model now contains 244 components and 0.19059 Jy
![Exited script file: muppet]
wmap "J0821-0323_X_1997_05_07_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8018 x 2.139 at -2.649 degrees (North through East)
! Clean map  min=-0.0047496  max=0.062938 Jy/beam
! Writing clean map to FITS file: J0821-0323_X_1997_05_07_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0629375 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000738244 
device "J0821-0323_X_1997_05_07_yyk\_map.eps/VPS"
! Attempting to open device: 'J0821-0323_X_1997_05_07_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.51894 3.51894 7.03787 14.0757 28.1515 56.303
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0022 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.062 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8018 x 2.139 at -2.649 degrees (North through East)
! Clean map  min=-0.0047496  max=0.062938 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0821-0323_X_1997_05_07_yyk\_map.gif/gif"
! Attempting to open device: 'J0821-0323_X_1997_05_07_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0821-0323_X_1997_05_07_yyk_uvs.log closed on Mon Jan  8 04:03:07 2007