! Started logfile: J0814-2521_X_1997_07_02_yyk_uvs.log on Mon Jan 8 04:01:22 2007 obs J0814-2521_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0814-2521_X_1997_07_02_yyk_uva.fits ! AN table 1: 139 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.828137 visibilities/baseline/integration-bin. ! Found source: J0814-2521 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 20720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0814-2521_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.268428 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7204 mas, bmaj=2.245 mas, bpa=3.57 degrees ! Estimated noise=1336.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.110504 Jy ! Component: 100 - total flux cleaned = 0.140913 Jy ! Total flux subtracted in 100 components = 0.140913 Jy ! Clean residual min=-0.009162 max=0.010159 Jy/beam ! Clean residual mean=-0.000034 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 0.140913 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.140913 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.230066Jy sigma=0.001272 ! Fit after self-cal, rms=0.229891Jy sigma=0.001272 ! Inverting map and beam ! Estimated beam: bmin=0.7204 mas, bmaj=2.245 mas, bpa=3.57 degrees ! Estimated noise=1336.94 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9524 mas, bmaj=2.707 mas, bpa=1.289 degrees ! Estimated noise=805.327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205947 Jy ! Component: 100 - total flux cleaned = 0.0291188 Jy ! Component: 150 - total flux cleaned = 0.032936 Jy ! Component: 200 - total flux cleaned = 0.0341994 Jy ! Total flux subtracted in 200 components = 0.0341994 Jy ! Clean residual min=-0.006414 max=0.009796 Jy/beam ! Clean residual mean=-0.000056 rms=0.002003 Jy/beam ! Combined flux in latest and established models = 0.175112 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 41 components and 0.175112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229068Jy sigma=0.001264 ! Fit after self-cal, rms=0.229092Jy sigma=0.001264 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9524 x 2.707 at 1.289 degrees (North through East) ! Clean map min=-0.0062166 max=0.13112 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00426 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.10 HN 1.05 KP 1.01 ! LA 0.99 MK 0.98 NL 1.05 OV 1.01 ! PT 0.90 SC 0.92 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.229092Jy sigma=0.001264 ! Fit after self-cal, rms=0.228863Jy sigma=0.001263 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228863Jy sigma=0.001263 ! Fit after self-cal, rms=0.228863Jy sigma=0.001263 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9471 mas, bmaj=2.688 mas, bpa=1.625 degrees ! Estimated noise=803.537 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.2, -1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105244 Jy ! Component: 100 - total flux cleaned = 0.0149739 Jy ! Component: 150 - total flux cleaned = 0.0174973 Jy ! Component: 200 - total flux cleaned = 0.0183909 Jy ! Total flux subtracted in 200 components = 0.0183909 Jy ! Clean residual min=-0.004668 max=0.006159 Jy/beam ! Clean residual mean=-0.000031 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.193503 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 67 components and 0.193503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228560Jy sigma=0.001261 ! Fit after self-cal, rms=0.228519Jy sigma=0.001260 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228519Jy sigma=0.001260 ! Fit after self-cal, rms=0.225380Jy sigma=0.001242 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471771 Jy ! Component: 100 - total flux cleaned = 0.00643199 Jy ! Component: 150 - total flux cleaned = 0.00740053 Jy ! Component: 200 - total flux cleaned = 0.00776093 Jy ! Total flux subtracted in 200 components = 0.00776093 Jy ! Clean residual min=-0.004581 max=0.004680 Jy/beam ! Clean residual mean=-0.000028 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.201264 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 87 components and 0.201264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225322Jy sigma=0.001241 ! Fit after self-cal, rms=0.224906Jy sigma=0.001239 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9471 x 2.688 at 1.625 degrees (North through East) ! Clean map min=-0.0045502 max=0.13499 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224906Jy sigma=0.001239 ! Fit after self-cal, rms=0.226162Jy sigma=0.001238 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226162Jy sigma=0.001238 ! Fit after self-cal, rms=0.226128Jy sigma=0.001237 ! Inverting map and beam ! Estimated beam: bmin=0.9523 mas, bmaj=2.702 mas, bpa=2.032 degrees ! Estimated noise=794.324 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112595 Jy ! Component: 100 - total flux cleaned = 0.00135592 Jy ! Component: 150 - total flux cleaned = 0.00135592 Jy ! Component: 200 - total flux cleaned = 0.0013217 Jy ! Total flux subtracted in 200 components = 0.0013217 Jy ! Clean residual min=-0.004604 max=0.003677 Jy/beam ! Clean residual mean=-0.000025 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.202586 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.202586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226110Jy sigma=0.001237 ! Fit after self-cal, rms=0.226124Jy sigma=0.001237 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226124Jy sigma=0.001237 ! Fit after self-cal, rms=0.226555Jy sigma=0.001236 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226555Jy sigma=0.001236 ! Fit after self-cal, rms=0.226557Jy sigma=0.001236 ! Inverting map and beam ! Estimated beam: bmin=0.953 mas, bmaj=2.68 mas, bpa=2.718 degrees ! Estimated noise=794.932 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576324 Jy ! Component: 100 - total flux cleaned = 0.000627541 Jy ! Component: 150 - total flux cleaned = 0.00062946 Jy ! Component: 200 - total flux cleaned = 0.000629705 Jy ! Total flux subtracted in 200 components = 0.000629705 Jy ! Clean residual min=-0.004541 max=0.003728 Jy/beam ! Clean residual mean=-0.000025 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.203216 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.203216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226535Jy sigma=0.001236 ! Fit after self-cal, rms=0.226538Jy sigma=0.001236 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.378 mas, bmaj=5.473 mas, bpa=0.5654 degrees ! Estimated noise=990.933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145222 Jy ! Component: 100 - total flux cleaned = 0.00150098 Jy ! Component: 150 - total flux cleaned = 0.00146113 Jy ! Component: 200 - total flux cleaned = 0.0014578 Jy ! Total flux subtracted in 200 components = 0.0014578 Jy ! Clean residual min=-0.004924 max=0.003952 Jy/beam ! Clean residual mean=-0.000040 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.204673 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 113 components and 0.204673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226538Jy sigma=0.001236 ! Fit after self-cal, rms=0.226535Jy sigma=0.001236 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7228 mas, bmaj=2.245 mas, bpa=4.39 degrees ! Estimated noise=1330.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.114873 Jy ! Component: 100 - total flux cleaned = 0.145072 Jy ! Component: 150 - total flux cleaned = 0.159428 Jy ! Component: 200 - total flux cleaned = 0.169731 Jy ! Total flux subtracted in 200 components = 0.169731 Jy ! Clean residual min=-0.007987 max=0.007382 Jy/beam ! Clean residual mean=-0.000030 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 0.169731 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.169731 Jy ! Inverting map and beam ! Estimated beam: bmin=0.953 mas, bmaj=2.68 mas, bpa=2.718 degrees ! Estimated noise=794.932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -0.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130668 Jy ! Component: 100 - total flux cleaned = 0.0204079 Jy ! Component: 150 - total flux cleaned = 0.0254221 Jy ! Component: 200 - total flux cleaned = 0.0290159 Jy ! Total flux subtracted in 200 components = 0.0290159 Jy ! Clean residual min=-0.004250 max=0.003779 Jy/beam ! Clean residual mean=-0.000030 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.198747 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 96 components and 0.198747 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.378 mas, bmaj=5.473 mas, bpa=0.5654 degrees ! Estimated noise=990.933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.003903 Jy ! Component: 100 - total flux cleaned = 0.00545234 Jy ! Component: 150 - total flux cleaned = 0.00592732 Jy ! Component: 200 - total flux cleaned = 0.00632337 Jy ! Total flux subtracted in 200 components = 0.00632337 Jy ! Clean residual min=-0.004786 max=0.003833 Jy/beam ! Clean residual mean=-0.000039 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.205071 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 119 components and 0.205071 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.953 mas, bmaj=2.68 mas, bpa=2.718 degrees ! Estimated noise=794.932 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000332605 Jy ! Component: 100 - total flux cleaned = -0.000272866 Jy ! Component: 150 - total flux cleaned = -0.000326496 Jy ! Component: 200 - total flux cleaned = -0.000377836 Jy ! Total flux subtracted in 200 components = -0.000377836 Jy ! Clean residual min=-0.003932 max=0.003659 Jy/beam ! Clean residual mean=-0.000021 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.204693 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.204693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226432Jy sigma=0.001236 ! Fit after self-cal, rms=0.226408Jy sigma=0.001236 wmodel J0814-2521_X_1997_07_02_yyk\_map.mod ! Writing 134 model components to file: J0814-2521_X_1997_07_02_yyk_map.mod wobs J0814-2521_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0814-2521_X_1997_07_02_yyk_uvs.fits wwins J0814-2521_X_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J0814-2521_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000852154 Jy ! Component: 100 - total flux cleaned = -0.00140651 Jy ! Component: 150 - total flux cleaned = -0.00181189 Jy ! Component: 200 - total flux cleaned = -0.00192062 Jy ! Component: 250 - total flux cleaned = -0.00202461 Jy ! Component: 300 - total flux cleaned = -0.00227683 Jy ! Component: 350 - total flux cleaned = -0.00237485 Jy ! Component: 400 - total flux cleaned = -0.00242222 Jy ! Component: 450 - total flux cleaned = -0.00246889 Jy ! Component: 500 - total flux cleaned = -0.00264762 Jy ! Component: 550 - total flux cleaned = -0.00255986 Jy ! Component: 600 - total flux cleaned = -0.00260275 Jy ! Component: 650 - total flux cleaned = -0.00264401 Jy ! Component: 700 - total flux cleaned = -0.00268448 Jy ! Component: 750 - total flux cleaned = -0.00284127 Jy ! Component: 800 - total flux cleaned = -0.00307068 Jy ! Component: 850 - total flux cleaned = -0.00318224 Jy ! Component: 900 - total flux cleaned = -0.00321892 Jy ! Component: 950 - total flux cleaned = -0.00350555 Jy ! Component: 1000 - total flux cleaned = -0.00354 Jy ! Component: 1050 - total flux cleaned = -0.00371348 Jy ! Component: 1100 - total flux cleaned = -0.00381591 Jy ! Component: 1150 - total flux cleaned = -0.0039157 Jy ! Component: 1200 - total flux cleaned = -0.00391564 Jy ! Component: 1250 - total flux cleaned = -0.00398061 Jy ! Component: 1300 - total flux cleaned = -0.00404478 Jy ! Component: 1350 - total flux cleaned = -0.0040764 Jy ! Component: 1400 - total flux cleaned = -0.00410754 Jy ! Component: 1450 - total flux cleaned = -0.00423002 Jy ! Component: 1500 - total flux cleaned = -0.00429009 Jy ! Component: 1550 - total flux cleaned = -0.00426013 Jy ! Component: 1600 - total flux cleaned = -0.00426051 Jy ! Component: 1650 - total flux cleaned = -0.00434843 Jy ! Component: 1700 - total flux cleaned = -0.00440599 Jy ! Component: 1750 - total flux cleaned = -0.00434897 Jy ! Component: 1800 - total flux cleaned = -0.00451849 Jy ! Component: 1850 - total flux cleaned = -0.00451841 Jy ! Component: 1900 - total flux cleaned = -0.00454629 Jy ! Component: 1950 - total flux cleaned = -0.00457386 Jy ! Component: 2000 - total flux cleaned = -0.00460108 Jy ! Total flux subtracted in 2048 components = -0.00465451 Jy ! Clean residual min=-0.001561 max=0.001578 Jy/beam ! Clean residual mean=-0.000008 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.200038 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 261 components and 0.200038 Jy ![Exited script file: muppet] wmap "J0814-2521_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.953 x 2.68 at 2.718 degrees (North through East) ! Clean map min=-0.0032751 max=0.13467 Jy/beam ! Writing clean map to FITS file: J0814-2521_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.134673 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000507549 device "J0814-2521_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0814-2521_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13063 1.13063 2.26126 4.52252 9.04503 18.0901 36.1801 72.3603 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.134 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.953 x 2.68 at 2.718 degrees (North through East) ! Clean map min=-0.0032751 max=0.13467 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0814-2521_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0814-2521_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0814-2521_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 04:01:31 2007