! Started logfile: J0807-1207_X_1997_05_07_yyk_uvs.log on Mon Jan  8 03:57:03 2007
obs J0807-1207_X_1997_05_07_yyk_uva.fits
! Reading UV FITS file: J0807-1207_X_1997_05_07_yyk_uva.fits
! AN table 1: 140 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.906349 visibilities/baseline/integration-bin.
! Found source: J0807-1207
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 613 lines of history.
! 
! Reading 22840 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0807-1207_X_1997_05_07_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.257008 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6972 mas, bmaj=1.848 mas, bpa=-0.03346 degrees
! Estimated noise=1162.18 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0688678 Jy
! Component: 100  -  total flux cleaned = 0.0865832 Jy
! Total flux subtracted in 100 components = 0.0865832 Jy
! Clean residual min=-0.011822 max=0.024039 Jy/beam
! Clean residual mean=0.000045 rms=0.003316 Jy/beam
! Combined flux in latest and established models = 0.0865832 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0865832 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.242068Jy  sigma=0.001329
! Fit after  self-cal, rms=0.241048Jy  sigma=0.001325
! Inverting map and beam 
! Estimated beam: bmin=0.6972 mas, bmaj=1.848 mas, bpa=-0.03346 degrees
! Estimated noise=1162.18 mJy/beam.
! Added new window around map position (-1.6, -0.4).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223544 Jy
! Component: 100  -  total flux cleaned = 0.0272362 Jy
! Total flux subtracted in 100 components = 0.0272362 Jy
! Clean residual min=-0.008785 max=0.019585 Jy/beam
! Clean residual mean=0.000037 rms=0.002773 Jy/beam
! Combined flux in latest and established models = 0.113819 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.113819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.239225Jy  sigma=0.001309
! Fit after  self-cal, rms=0.238783Jy  sigma=0.001307
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8854 mas, bmaj=2.257 mas, bpa=-1.328 degrees
! Estimated noise=730.98 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156669 Jy
! Component: 100  -  total flux cleaned = 0.0220888 Jy
! Component: 150  -  total flux cleaned = 0.0250084 Jy
! Component: 200  -  total flux cleaned = 0.0255695 Jy
! Total flux subtracted in 200 components = 0.0255695 Jy
! Clean residual min=-0.006961 max=0.008576 Jy/beam
! Clean residual mean=0.000149 rms=0.001648 Jy/beam
! Combined flux in latest and established models = 0.139389 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 39 components and 0.139389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238364Jy  sigma=0.001301
! Fit after  self-cal, rms=0.238297Jy  sigma=0.001301
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8854 x 2.257 at -1.328 degrees (North through East)
! Clean map  min=-0.0064077  max=0.077754 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.999656
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     HN        1.06     KP        0.93     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.238297Jy  sigma=0.001301
! Fit after  self-cal, rms=0.238958Jy  sigma=0.001301
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238958Jy  sigma=0.001301
! Fit after  self-cal, rms=0.238961Jy  sigma=0.001301
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8943 mas, bmaj=2.273 mas, bpa=-1.525 degrees
! Estimated noise=727.826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000900042 Jy
! Component: 100  -  total flux cleaned = 0.000651381 Jy
! Component: 150  -  total flux cleaned = 0.000458728 Jy
! Component: 200  -  total flux cleaned = 0.000353824 Jy
! Total flux subtracted in 200 components = 0.000353824 Jy
! Clean residual min=-0.006435 max=0.005800 Jy/beam
! Clean residual mean=0.000141 rms=0.001565 Jy/beam
! Combined flux in latest and established models = 0.139743 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 59 components and 0.139743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238895Jy  sigma=0.001301
! Fit after  self-cal, rms=0.238883Jy  sigma=0.001301
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238883Jy  sigma=0.001301
! Fit after  self-cal, rms=0.237723Jy  sigma=0.001294
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223206 Jy
! Component: 100  -  total flux cleaned = 0.00235242 Jy
! Component: 150  -  total flux cleaned = 0.00240092 Jy
! Component: 200  -  total flux cleaned = 0.00240489 Jy
! Total flux subtracted in 200 components = 0.00240489 Jy
! Clean residual min=-0.005935 max=0.006292 Jy/beam
! Clean residual mean=0.000132 rms=0.001504 Jy/beam
! Combined flux in latest and established models = 0.142148 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 67 components and 0.142148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.237710Jy  sigma=0.001294
! Fit after  self-cal, rms=0.237493Jy  sigma=0.001292
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8943 x 2.273 at -1.525 degrees (North through East)
! Clean map  min=-0.0056014  max=0.077777 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.387 mas, bmaj=4.652 mas, bpa=13.18 degrees
! Estimated noise=933.968 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019148 Jy
! Component: 100  -  total flux cleaned = 0.00199969 Jy
! Component: 150  -  total flux cleaned = 0.00205368 Jy
! Component: 200  -  total flux cleaned = 0.00210652 Jy
! Total flux subtracted in 200 components = 0.00210652 Jy
! Clean residual min=-0.007216 max=0.009386 Jy/beam
! Clean residual mean=0.000244 rms=0.002430 Jy/beam
! Combined flux in latest and established models = 0.144254 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 72 components and 0.144254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.237502Jy  sigma=0.001293
! Fit after  self-cal, rms=0.237409Jy  sigma=0.001292
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6996 mas, bmaj=1.851 mas, bpa=-0.1234 degrees
! Estimated noise=1166.96 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0813761 Jy
! Component: 100  -  total flux cleaned = 0.107892 Jy
! Component: 150  -  total flux cleaned = 0.121283 Jy
! Component: 200  -  total flux cleaned = 0.129615 Jy
! Total flux subtracted in 200 components = 0.129615 Jy
! Clean residual min=-0.008109 max=0.007724 Jy/beam
! Clean residual mean=0.000024 rms=0.002016 Jy/beam
! Combined flux in latest and established models = 0.129615 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.129615 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8943 mas, bmaj=2.273 mas, bpa=-1.525 degrees
! Estimated noise=727.826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.6, -1.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102864 Jy
! Component: 100  -  total flux cleaned = 0.0157289 Jy
! Component: 150  -  total flux cleaned = 0.0175667 Jy
! Component: 200  -  total flux cleaned = 0.0185332 Jy
! Total flux subtracted in 200 components = 0.0185332 Jy
! Clean residual min=-0.005067 max=0.006605 Jy/beam
! Clean residual mean=0.000103 rms=0.001409 Jy/beam
! Combined flux in latest and established models = 0.148148 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 53 components and 0.148148 Jy
! Inverting map 
! Added new window around map position (-9.4, -1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00676238 Jy
! Component: 100  -  total flux cleaned = 0.00966788 Jy
! Component: 150  -  total flux cleaned = 0.0113292 Jy
! Component: 200  -  total flux cleaned = 0.0123103 Jy
! Total flux subtracted in 200 components = 0.0123103 Jy
! Clean residual min=-0.004155 max=0.004471 Jy/beam
! Clean residual mean=0.000058 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.160458 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 84 components and 0.160458 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.387 mas, bmaj=4.652 mas, bpa=13.18 degrees
! Estimated noise=933.968 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235749 Jy
! Component: 100  -  total flux cleaned = 0.00302198 Jy
! Component: 150  -  total flux cleaned = 0.00322537 Jy
! Component: 200  -  total flux cleaned = 0.00328534 Jy
! Total flux subtracted in 200 components = 0.00328534 Jy
! Clean residual min=-0.004885 max=0.005745 Jy/beam
! Clean residual mean=0.000094 rms=0.001685 Jy/beam
! Combined flux in latest and established models = 0.163744 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 99 components and 0.163744 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8943 mas, bmaj=2.273 mas, bpa=-1.525 degrees
! Estimated noise=727.826 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195215 Jy
! Component: 100  -  total flux cleaned = -0.000195835 Jy
! Component: 150  -  total flux cleaned = -2.87816e-05 Jy
! Component: 200  -  total flux cleaned = 7.07517e-05 Jy
! Total flux subtracted in 200 components = 7.07517e-05 Jy
! Clean residual min=-0.003922 max=0.004391 Jy/beam
! Clean residual mean=0.000047 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.163814 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 113 components and 0.163814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.237142Jy  sigma=0.001290
! Fit after  self-cal, rms=0.237045Jy  sigma=0.001290
wmodel J0807-1207_X_1997_05_07_yyk\_map.mod
! Writing 113 model components to file: J0807-1207_X_1997_05_07_yyk_map.mod
wobs J0807-1207_X_1997_05_07_yyk\_uvs.fits
! Writing UV FITS file: J0807-1207_X_1997_05_07_yyk_uvs.fits
wwins J0807-1207_X_1997_05_07_yyk\_map.win
! wwins: Wrote 4 windows to J0807-1207_X_1997_05_07_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000629104 Jy
! Component: 100  -  total flux cleaned = 0.000375625 Jy
! Component: 150  -  total flux cleaned = -0.000536513 Jy
! Component: 200  -  total flux cleaned = -0.00117245 Jy
! Component: 250  -  total flux cleaned = -0.00166893 Jy
! Component: 300  -  total flux cleaned = -0.00188253 Jy
! Component: 350  -  total flux cleaned = -0.00208858 Jy
! Component: 400  -  total flux cleaned = -0.00218907 Jy
! Component: 450  -  total flux cleaned = -0.00223832 Jy
! Component: 500  -  total flux cleaned = -0.00214513 Jy
! Component: 550  -  total flux cleaned = -0.00219247 Jy
! Component: 600  -  total flux cleaned = -0.00223643 Jy
! Component: 650  -  total flux cleaned = -0.00219204 Jy
! Component: 700  -  total flux cleaned = -0.0022353 Jy
! Component: 750  -  total flux cleaned = -0.00219355 Jy
! Component: 800  -  total flux cleaned = -0.00215148 Jy
! Component: 850  -  total flux cleaned = -0.00207003 Jy
! Component: 900  -  total flux cleaned = -0.00202947 Jy
! Component: 950  -  total flux cleaned = -0.00199077 Jy
! Component: 1000  -  total flux cleaned = -0.00195241 Jy
! Component: 1050  -  total flux cleaned = -0.00183846 Jy
! Component: 1100  -  total flux cleaned = -0.00180093 Jy
! Component: 1150  -  total flux cleaned = -0.00172739 Jy
! Component: 1200  -  total flux cleaned = -0.00161817 Jy
! Component: 1250  -  total flux cleaned = -0.00154606 Jy
! Component: 1300  -  total flux cleaned = -0.00140401 Jy
! Component: 1350  -  total flux cleaned = -0.00122893 Jy
! Component: 1400  -  total flux cleaned = -0.0010908 Jy
! Component: 1450  -  total flux cleaned = -0.000955213 Jy
! Component: 1500  -  total flux cleaned = -0.000887844 Jy
! Component: 1550  -  total flux cleaned = -0.000788568 Jy
! Component: 1600  -  total flux cleaned = -0.000691239 Jy
! Component: 1650  -  total flux cleaned = -0.000691557 Jy
! Component: 1700  -  total flux cleaned = -0.000468225 Jy
! Component: 1750  -  total flux cleaned = -0.000373976 Jy
! Component: 1800  -  total flux cleaned = -0.000217853 Jy
! Component: 1850  -  total flux cleaned = 2.82581e-05 Jy
! Component: 1900  -  total flux cleaned = 0.000149558 Jy
! Component: 1950  -  total flux cleaned = 0.00036018 Jy
! Component: 2000  -  total flux cleaned = 0.000568344 Jy
! Total flux subtracted in 2048 components = 0.000538616 Jy
! Clean residual min=-0.001679 max=0.001515 Jy/beam
! Clean residual mean=0.000026 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.164353 Jy
keep
! Adding 126 model components to the UV plane model.
! The established model now contains 239 components and 0.164353 Jy
![Exited script file: muppet]
wmap "J0807-1207_X_1997_05_07_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8943 x 2.273 at -1.525 degrees (North through East)
! Clean map  min=-0.0029417  max=0.0789 Jy/beam
! Writing clean map to FITS file: J0807-1207_X_1997_05_07_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0789004 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000560509 
device "J0807-1207_X_1997_05_07_yyk\_map.eps/VPS"
! Attempting to open device: 'J0807-1207_X_1997_05_07_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.1312 2.1312 4.26241 8.52482 17.0496 34.0993 68.1985
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.078 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8943 x 2.273 at -1.525 degrees (North through East)
! Clean map  min=-0.0029417  max=0.0789 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0807-1207_X_1997_05_07_yyk\_map.gif/gif"
! Attempting to open device: 'J0807-1207_X_1997_05_07_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0807-1207_X_1997_05_07_yyk_uvs.log closed on Mon Jan  8 03:57:12 2007