! Started logfile: J0804-2749_S_1997_08_27_yyk_uvs.log on Sun Jan 7 16:53:11 2007 obs J0804-2749_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J0804-2749_S_1997_08_27_yyk_uva.fits ! AN table 1: 135 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.912099 visibilities/baseline/integration-bin. ! Found source: J0804-2749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 22164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0804-2749_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.767368 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.209 mas, bpa=-9.058 degrees ! Estimated noise=2844.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.491559 Jy ! Component: 100 - total flux cleaned = 0.644916 Jy ! Total flux subtracted in 100 components = 0.644916 Jy ! Clean residual min=-0.030056 max=0.060077 Jy/beam ! Clean residual mean=0.000051 rms=0.010602 Jy/beam ! Combined flux in latest and established models = 0.644916 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.644916 Jy ! ! Correcting IF 1. ! A total of 275 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.431560Jy sigma=0.001368 ! Fit after self-cal, rms=0.431075Jy sigma=0.001366 ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.209 mas, bpa=-9.058 degrees ! Estimated noise=2844.88 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=8.04 mas, bpa=-11.38 degrees ! Estimated noise=1449.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.104314 Jy ! Component: 100 - total flux cleaned = 0.142507 Jy ! Component: 150 - total flux cleaned = 0.156893 Jy ! Component: 200 - total flux cleaned = 0.158707 Jy ! Total flux subtracted in 200 components = 0.158707 Jy ! Clean residual min=-0.025171 max=0.038712 Jy/beam ! Clean residual mean=0.000421 rms=0.008046 Jy/beam ! Combined flux in latest and established models = 0.803622 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 42 components and 0.803622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.414621Jy sigma=0.001307 ! Fit after self-cal, rms=0.414581Jy sigma=0.001307 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.436 x 8.04 at -11.38 degrees (North through East) ! Clean map min=-0.024454 max=0.55448 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02663 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.10 HN 0.93 KP 0.91 ! LA 0.98 MK 1.02 NL 1.00* OV 1.10 ! PT 0.95 SC 0.80 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.977809 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.12 HN 1.14 KP 0.94 ! LA 1.06 MK 1.05 NL 1.05 OV 1.03 ! PT 0.93 SC 0.90 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05219 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 0.97 KP 0.92 ! LA 0.80 MK 0.80 NL 0.98 OV 0.96 ! PT 1.07 SC 0.98 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.990619 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.11 HN 1.26 KP 0.94 ! LA 0.89 MK 0.94 NL 1.12 OV 0.96 ! PT 0.92 SC 0.96 ! ! ! Fit before self-cal, rms=0.414581Jy sigma=0.001307 ! Fit after self-cal, rms=0.403384Jy sigma=0.001285 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403384Jy sigma=0.001285 ! Fit after self-cal, rms=0.403388Jy sigma=0.001285 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=7.69 mas, bpa=-10.33 degrees ! Estimated noise=1445.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0404796 Jy ! Component: 100 - total flux cleaned = 0.0513688 Jy ! Component: 150 - total flux cleaned = 0.0545249 Jy ! Component: 200 - total flux cleaned = 0.0571175 Jy ! Total flux subtracted in 200 components = 0.0571175 Jy ! Clean residual min=-0.018344 max=0.016968 Jy/beam ! Clean residual mean=-0.000034 rms=0.004184 Jy/beam ! Combined flux in latest and established models = 0.86074 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.86074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400077Jy sigma=0.001273 ! Fit after self-cal, rms=0.399759Jy sigma=0.001272 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399759Jy sigma=0.001272 ! Fit after self-cal, rms=0.397437Jy sigma=0.001264 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102168 Jy ! Component: 100 - total flux cleaned = 0.0106145 Jy ! Component: 150 - total flux cleaned = 0.010985 Jy ! Component: 200 - total flux cleaned = 0.0109768 Jy ! Total flux subtracted in 200 components = 0.0109768 Jy ! Clean residual min=-0.015114 max=0.015771 Jy/beam ! Clean residual mean=-0.000050 rms=0.003744 Jy/beam ! Combined flux in latest and established models = 0.871717 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.871717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396508Jy sigma=0.001261 ! Fit after self-cal, rms=0.396105Jy sigma=0.001260 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.338 x 7.69 at -10.33 degrees (North through East) ! Clean map min=-0.015152 max=0.55014 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396105Jy sigma=0.001260 ! Fit after self-cal, rms=0.465048Jy sigma=0.001244 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465048Jy sigma=0.001244 ! Fit after self-cal, rms=0.464986Jy sigma=0.001244 ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=9.005 mas, bpa=-3.062 degrees ! Estimated noise=1474.85 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153976 Jy ! Component: 100 - total flux cleaned = 0.0153999 Jy ! Component: 150 - total flux cleaned = 0.0156972 Jy ! Component: 200 - total flux cleaned = 0.0154197 Jy ! Total flux subtracted in 200 components = 0.0154197 Jy ! Clean residual min=-0.009034 max=0.008090 Jy/beam ! Clean residual mean=0.000012 rms=0.002366 Jy/beam ! Combined flux in latest and established models = 0.887136 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.887136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.464392Jy sigma=0.001242 ! Fit after self-cal, rms=0.464327Jy sigma=0.001241 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.464327Jy sigma=0.001241 ! Fit after self-cal, rms=0.503858Jy sigma=0.001239 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503858Jy sigma=0.001239 ! Fit after self-cal, rms=0.503878Jy sigma=0.001239 ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=9.071 mas, bpa=-2.661 degrees ! Estimated noise=1472.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00639502 Jy ! Component: 100 - total flux cleaned = 0.00690961 Jy ! Component: 150 - total flux cleaned = 0.0069159 Jy ! Component: 200 - total flux cleaned = 0.00671445 Jy ! Total flux subtracted in 200 components = 0.00671445 Jy ! Clean residual min=-0.008031 max=0.007746 Jy/beam ! Clean residual mean=0.000020 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 0.893851 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.893851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503637Jy sigma=0.001238 ! Fit after self-cal, rms=0.503621Jy sigma=0.001238 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.415 mas, bmaj=19.28 mas, bpa=1.088 degrees ! Estimated noise=1844.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013674 Jy ! Component: 100 - total flux cleaned = 0.00109511 Jy ! Component: 150 - total flux cleaned = 0.000869112 Jy ! Component: 200 - total flux cleaned = 0.00055039 Jy ! Total flux subtracted in 200 components = 0.00055039 Jy ! Clean residual min=-0.007201 max=0.008129 Jy/beam ! Clean residual mean=0.000029 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.894401 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 131 components and 0.894401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503575Jy sigma=0.001238 ! Fit after self-cal, rms=0.503557Jy sigma=0.001238 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=6.633 mas, bpa=-3.628 degrees ! Estimated noise=2976.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.493337 Jy ! Component: 100 - total flux cleaned = 0.654447 Jy ! Component: 150 - total flux cleaned = 0.736291 Jy ! Component: 200 - total flux cleaned = 0.788119 Jy ! Total flux subtracted in 200 components = 0.788119 Jy ! Clean residual min=-0.017710 max=0.026752 Jy/beam ! Clean residual mean=-0.000023 rms=0.005210 Jy/beam ! Combined flux in latest and established models = 0.788119 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.788119 Jy ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=9.071 mas, bpa=-2.661 degrees ! Estimated noise=1472.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.052305 Jy ! Component: 100 - total flux cleaned = 0.0784206 Jy ! Component: 150 - total flux cleaned = 0.093496 Jy ! Component: 200 - total flux cleaned = 0.0992098 Jy ! Total flux subtracted in 200 components = 0.0992098 Jy ! Clean residual min=-0.009336 max=0.007451 Jy/beam ! Clean residual mean=0.000029 rms=0.002373 Jy/beam ! Combined flux in latest and established models = 0.887329 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 78 components and 0.887329 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.415 mas, bmaj=19.28 mas, bpa=1.088 degrees ! Estimated noise=1844.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043262 Jy ! Component: 100 - total flux cleaned = 0.00536124 Jy ! Component: 150 - total flux cleaned = 0.00596499 Jy ! Component: 200 - total flux cleaned = 0.00613909 Jy ! Total flux subtracted in 200 components = 0.00613909 Jy ! Clean residual min=-0.007733 max=0.008391 Jy/beam ! Clean residual mean=0.000036 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 0.893468 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 110 components and 0.893468 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=9.071 mas, bpa=-2.661 degrees ! Estimated noise=1472.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199184 Jy ! Component: 100 - total flux cleaned = -0.00150473 Jy ! Component: 150 - total flux cleaned = -0.00108175 Jy ! Component: 200 - total flux cleaned = -0.0008943 Jy ! Total flux subtracted in 200 components = -0.0008943 Jy ! Clean residual min=-0.007768 max=0.006708 Jy/beam ! Clean residual mean=0.000023 rms=0.002032 Jy/beam ! Combined flux in latest and established models = 0.892574 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.892574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503722Jy sigma=0.001238 ! Fit after self-cal, rms=0.503618Jy sigma=0.001238 wmodel J0804-2749_S_1997_08_27_yyk\_map.mod ! Writing 122 model components to file: J0804-2749_S_1997_08_27_yyk_map.mod wobs J0804-2749_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J0804-2749_S_1997_08_27_yyk_uvs.fits wwins J0804-2749_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J0804-2749_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152441 Jy ! Component: 100 - total flux cleaned = -0.00152494 Jy ! Component: 150 - total flux cleaned = -0.00175734 Jy ! Component: 200 - total flux cleaned = -0.00175239 Jy ! Component: 250 - total flux cleaned = -0.00154203 Jy ! Component: 300 - total flux cleaned = -0.00164402 Jy ! Component: 350 - total flux cleaned = -0.00173811 Jy ! Component: 400 - total flux cleaned = -0.00164414 Jy ! Component: 450 - total flux cleaned = -0.00173763 Jy ! Component: 500 - total flux cleaned = -0.00217289 Jy ! Component: 550 - total flux cleaned = -0.00225392 Jy ! Component: 600 - total flux cleaned = -0.00257974 Jy ! Component: 650 - total flux cleaned = -0.00249891 Jy ! Component: 700 - total flux cleaned = -0.00281328 Jy ! Component: 750 - total flux cleaned = -0.00288967 Jy ! Component: 800 - total flux cleaned = -0.00319183 Jy ! Component: 850 - total flux cleaned = -0.00356011 Jy ! Component: 900 - total flux cleaned = -0.00399415 Jy ! Component: 950 - total flux cleaned = -0.00455934 Jy ! Component: 1000 - total flux cleaned = -0.00476648 Jy ! Component: 1050 - total flux cleaned = -0.00517546 Jy ! Component: 1100 - total flux cleaned = -0.00570826 Jy ! Component: 1150 - total flux cleaned = -0.00616571 Jy ! Component: 1200 - total flux cleaned = -0.00623083 Jy ! Component: 1250 - total flux cleaned = -0.00673872 Jy ! Component: 1300 - total flux cleaned = -0.00698863 Jy ! Component: 1350 - total flux cleaned = -0.00717457 Jy ! Component: 1400 - total flux cleaned = -0.00753825 Jy ! Component: 1450 - total flux cleaned = -0.00759729 Jy ! Component: 1500 - total flux cleaned = -0.00777482 Jy ! Component: 1550 - total flux cleaned = -0.00806527 Jy ! Component: 1600 - total flux cleaned = -0.00812303 Jy ! Component: 1650 - total flux cleaned = -0.00834904 Jy ! Component: 1700 - total flux cleaned = -0.00862894 Jy ! Component: 1750 - total flux cleaned = -0.00890495 Jy ! Component: 1800 - total flux cleaned = -0.00939562 Jy ! Component: 1850 - total flux cleaned = -0.00955681 Jy ! Component: 1900 - total flux cleaned = -0.00998323 Jy ! Component: 1950 - total flux cleaned = -0.0105627 Jy ! Component: 2000 - total flux cleaned = -0.0108227 Jy ! Total flux subtracted in 2048 components = -0.0110814 Jy ! Clean residual min=-0.002684 max=0.003418 Jy/beam ! Clean residual mean=-0.000000 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.881492 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 265 components and 0.881493 Jy ![Exited script file: muppet] wmap "J0804-2749_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.424 x 9.071 at -2.661 degrees (North through East) ! Clean map min=-0.0070939 max=0.58423 Jy/beam ! Writing clean map to FITS file: J0804-2749_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.584227 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00102012 device "J0804-2749_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0804-2749_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.52383 0.52383 1.04766 2.09532 4.19064 8.38128 16.7626 33.5251 67.0502 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.584 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.424 x 9.071 at -2.661 degrees (North through East) ! Clean map min=-0.0070939 max=0.58423 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0804-2749_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0804-2749_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0804-2749_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 16:53:18 2007