! Started logfile: J0730-0241_X_1997_05_07_yyk_uvs.log on Mon Jan 8 03:43:07 2007 obs J0730-0241_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0730-0241_X_1997_05_07_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.842479 visibilities/baseline/integration-bin. ! Found source: J0730-0241 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 22292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0730-0241_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.308863 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7606 mas, bmaj=1.912 mas, bpa=-0.2199 degrees ! Estimated noise=1150.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.194461 Jy ! Component: 100 - total flux cleaned = 0.233946 Jy ! Total flux subtracted in 100 components = 0.233946 Jy ! Clean residual min=-0.009756 max=0.016479 Jy/beam ! Clean residual mean=-0.000037 rms=0.002691 Jy/beam ! Combined flux in latest and established models = 0.233946 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.233946 Jy ! ! Correcting IF 1. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.199826Jy sigma=0.001263 ! Fit after self-cal, rms=0.199503Jy sigma=0.001262 ! Inverting map and beam ! Estimated beam: bmin=0.7606 mas, bmaj=1.912 mas, bpa=-0.2199 degrees ! Estimated noise=1150.53 mJy/beam. ! Added new window around map position (1.2, -0.4). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203683 Jy ! Component: 100 - total flux cleaned = 0.0310126 Jy ! Total flux subtracted in 100 components = 0.0310126 Jy ! Clean residual min=-0.007389 max=0.010748 Jy/beam ! Clean residual mean=-0.000014 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 0.264959 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.264959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197509Jy sigma=0.001245 ! Fit after self-cal, rms=0.197382Jy sigma=0.001244 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9363 mas, bmaj=2.259 mas, bpa=-0.7142 degrees ! Estimated noise=703.902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013039 Jy ! Component: 100 - total flux cleaned = 0.0191247 Jy ! Component: 150 - total flux cleaned = 0.0222703 Jy ! Component: 200 - total flux cleaned = 0.0236065 Jy ! Total flux subtracted in 200 components = 0.0236065 Jy ! Clean residual min=-0.004784 max=0.005499 Jy/beam ! Clean residual mean=0.000003 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.288565 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 54 components and 0.288565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196970Jy sigma=0.001240 ! Fit after self-cal, rms=0.196930Jy sigma=0.001240 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9363 x 2.259 at -0.7142 degrees (North through East) ! Clean map min=-0.0040485 max=0.22985 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00587 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.97 KP 1.01 ! LA 1.00 MK 1.01 NL 1.09 OV 0.99 ! PT 0.95 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.99871 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.98 KP 1.02 ! LA 0.98 MK 1.00 NL 1.11 OV 1.05 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.992736 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.98 KP 1.01 ! LA 0.99 MK 1.01 NL 1.08 OV 1.01 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.982611 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.02 KP 1.00 ! LA 1.00 MK 0.99 NL 1.10 OV 1.04 ! PT 1.00 SC 1.04 ! ! ! Fit before self-cal, rms=0.196930Jy sigma=0.001240 ! Fit after self-cal, rms=0.198238Jy sigma=0.001237 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198238Jy sigma=0.001237 ! Fit after self-cal, rms=0.198239Jy sigma=0.001237 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9405 mas, bmaj=2.272 mas, bpa=-0.6715 degrees ! Estimated noise=695.916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00281093 Jy ! Component: 100 - total flux cleaned = -0.00315227 Jy ! Component: 150 - total flux cleaned = -0.00336642 Jy ! Component: 200 - total flux cleaned = -0.00343664 Jy ! Total flux subtracted in 200 components = -0.00343664 Jy ! Clean residual min=-0.003026 max=0.003105 Jy/beam ! Clean residual mean=0.000006 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.285129 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.285129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198198Jy sigma=0.001237 ! Fit after self-cal, rms=0.198197Jy sigma=0.001237 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198197Jy sigma=0.001237 ! Fit after self-cal, rms=0.193385Jy sigma=0.001203 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266189 Jy ! Component: 100 - total flux cleaned = 0.00248803 Jy ! Component: 150 - total flux cleaned = 0.00261717 Jy ! Component: 200 - total flux cleaned = 0.00266914 Jy ! Total flux subtracted in 200 components = 0.00266914 Jy ! Clean residual min=-0.003083 max=0.003243 Jy/beam ! Clean residual mean=0.000007 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.287798 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.287798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193377Jy sigma=0.001203 ! Fit after self-cal, rms=0.192916Jy sigma=0.001200 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9405 x 2.272 at -0.6715 degrees (North through East) ! Clean map min=-0.0029381 max=0.23182 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192916Jy sigma=0.001200 ! Fit after self-cal, rms=0.206163Jy sigma=0.001197 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206163Jy sigma=0.001197 ! Fit after self-cal, rms=0.206070Jy sigma=0.001197 ! Inverting map and beam ! Estimated beam: bmin=0.9339 mas, bmaj=2.263 mas, bpa=-1.172 degrees ! Estimated noise=691.664 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000672289 Jy ! Component: 100 - total flux cleaned = 0.000623909 Jy ! Component: 150 - total flux cleaned = 0.000659462 Jy ! Component: 200 - total flux cleaned = 0.000674477 Jy ! Total flux subtracted in 200 components = 0.000674477 Jy ! Clean residual min=-0.002706 max=0.002341 Jy/beam ! Clean residual mean=0.000003 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.288472 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.288472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206062Jy sigma=0.001197 ! Fit after self-cal, rms=0.206022Jy sigma=0.001197 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206022Jy sigma=0.001197 ! Fit after self-cal, rms=0.208028Jy sigma=0.001195 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208028Jy sigma=0.001195 ! Fit after self-cal, rms=0.208008Jy sigma=0.001195 ! Inverting map and beam ! Estimated beam: bmin=0.9337 mas, bmaj=2.264 mas, bpa=-1.203 degrees ! Estimated noise=692.175 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054747 Jy ! Component: 100 - total flux cleaned = 0.000650427 Jy ! Component: 150 - total flux cleaned = 0.000677028 Jy ! Component: 200 - total flux cleaned = 0.000677401 Jy ! Total flux subtracted in 200 components = 0.000677401 Jy ! Clean residual min=-0.002754 max=0.002339 Jy/beam ! Clean residual mean=0.000002 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.28915 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.28915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208005Jy sigma=0.001195 ! Fit after self-cal, rms=0.207990Jy sigma=0.001195 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=3.687 mas, bpa=-2.335 degrees ! Estimated noise=887.229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241602 Jy ! Component: 100 - total flux cleaned = 0.00027566 Jy ! Component: 150 - total flux cleaned = 0.000283239 Jy ! Component: 200 - total flux cleaned = 0.000276412 Jy ! Total flux subtracted in 200 components = 0.000276412 Jy ! Clean residual min=-0.002694 max=0.002799 Jy/beam ! Clean residual mean=0.000005 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.289426 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 0.289426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207989Jy sigma=0.001195 ! Fit after self-cal, rms=0.207979Jy sigma=0.001195 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7562 mas, bmaj=1.912 mas, bpa=-0.5421 degrees ! Estimated noise=1148.99 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.198592 Jy ! Component: 100 - total flux cleaned = 0.241308 Jy ! Component: 150 - total flux cleaned = 0.261425 Jy ! Component: 200 - total flux cleaned = 0.272554 Jy ! Total flux subtracted in 200 components = 0.272554 Jy ! Clean residual min=-0.005177 max=0.004718 Jy/beam ! Clean residual mean=-0.000012 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.272554 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.272554 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9337 mas, bmaj=2.264 mas, bpa=-1.203 degrees ! Estimated noise=692.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00896182 Jy ! Component: 100 - total flux cleaned = 0.0128348 Jy ! Component: 150 - total flux cleaned = 0.0148071 Jy ! Component: 200 - total flux cleaned = 0.0155826 Jy ! Total flux subtracted in 200 components = 0.0155826 Jy ! Clean residual min=-0.002900 max=0.002369 Jy/beam ! Clean residual mean=0.000001 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.288136 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 55 components and 0.288136 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=3.687 mas, bpa=-2.335 degrees ! Estimated noise=887.229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106568 Jy ! Component: 100 - total flux cleaned = 0.00110028 Jy ! Component: 150 - total flux cleaned = 0.00109983 Jy ! Component: 200 - total flux cleaned = 0.00110016 Jy ! Total flux subtracted in 200 components = 0.00110016 Jy ! Clean residual min=-0.002688 max=0.002852 Jy/beam ! Clean residual mean=0.000004 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.289236 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.289236 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9337 mas, bmaj=2.264 mas, bpa=-1.203 degrees ! Estimated noise=692.175 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364793 Jy ! Component: 100 - total flux cleaned = -0.00036536 Jy ! Component: 150 - total flux cleaned = -0.000340673 Jy ! Component: 200 - total flux cleaned = -0.000339019 Jy ! Total flux subtracted in 200 components = -0.000339019 Jy ! Clean residual min=-0.002855 max=0.002381 Jy/beam ! Clean residual mean=0.000002 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.288897 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.288897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207990Jy sigma=0.001195 ! Fit after self-cal, rms=0.207983Jy sigma=0.001195 wmodel J0730-0241_X_1997_05_07_yyk\_map.mod ! Writing 76 model components to file: J0730-0241_X_1997_05_07_yyk_map.mod wobs J0730-0241_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0730-0241_X_1997_05_07_yyk_uvs.fits wwins J0730-0241_X_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J0730-0241_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000752653 Jy ! Component: 100 - total flux cleaned = -0.000665731 Jy ! Component: 150 - total flux cleaned = -0.000505283 Jy ! Component: 200 - total flux cleaned = -0.000426704 Jy ! Component: 250 - total flux cleaned = -0.000497341 Jy ! Component: 300 - total flux cleaned = -0.000532389 Jy ! Component: 350 - total flux cleaned = -0.00070453 Jy ! Component: 400 - total flux cleaned = -0.000837285 Jy ! Component: 450 - total flux cleaned = -0.000966245 Jy ! Component: 500 - total flux cleaned = -0.00115575 Jy ! Component: 550 - total flux cleaned = -0.00137261 Jy ! Component: 600 - total flux cleaned = -0.00158539 Jy ! Component: 650 - total flux cleaned = -0.00182312 Jy ! Component: 700 - total flux cleaned = -0.00220184 Jy ! Component: 750 - total flux cleaned = -0.00245974 Jy ! Component: 800 - total flux cleaned = -0.00279805 Jy ! Component: 850 - total flux cleaned = -0.00313085 Jy ! Component: 900 - total flux cleaned = -0.00343107 Jy ! Component: 950 - total flux cleaned = -0.00369958 Jy ! Component: 1000 - total flux cleaned = -0.00396351 Jy ! Component: 1050 - total flux cleaned = -0.00409348 Jy ! Component: 1100 - total flux cleaned = -0.00422164 Jy ! Component: 1150 - total flux cleaned = -0.00437327 Jy ! Component: 1200 - total flux cleaned = -0.00454818 Jy ! Component: 1250 - total flux cleaned = -0.00467154 Jy ! Component: 1300 - total flux cleaned = -0.00481731 Jy ! Component: 1350 - total flux cleaned = -0.00496114 Jy ! Component: 1400 - total flux cleaned = -0.00500818 Jy ! Component: 1450 - total flux cleaned = -0.00505506 Jy ! Component: 1500 - total flux cleaned = -0.00514751 Jy ! Component: 1550 - total flux cleaned = -0.00519362 Jy ! Component: 1600 - total flux cleaned = -0.00523875 Jy ! Component: 1650 - total flux cleaned = -0.00526098 Jy ! Component: 1700 - total flux cleaned = -0.00534956 Jy ! Component: 1750 - total flux cleaned = -0.00545836 Jy ! Component: 1800 - total flux cleaned = -0.00541508 Jy ! Component: 1850 - total flux cleaned = -0.00550073 Jy ! Component: 1900 - total flux cleaned = -0.00554318 Jy ! Component: 1950 - total flux cleaned = -0.00554329 Jy ! Component: 2000 - total flux cleaned = -0.00562561 Jy ! Total flux subtracted in 2048 components = -0.00562519 Jy ! Clean residual min=-0.001127 max=0.001263 Jy/beam ! Clean residual mean=0.000000 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.283272 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 215 components and 0.283272 Jy ![Exited script file: muppet] wmap "J0730-0241_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9337 x 2.264 at -1.203 degrees (North through East) ! Clean map min=-0.0023586 max=0.23182 Jy/beam ! Writing clean map to FITS file: J0730-0241_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.231817 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00038559 device "J0730-0241_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0730-0241_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.499002 0.499002 0.998004 1.99601 3.99202 7.98403 15.9681 31.9361 63.8723 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.231 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9337 x 2.264 at -1.203 degrees (North through East) ! Clean map min=-0.0023586 max=0.23182 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0730-0241_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0730-0241_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0730-0241_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 03:43:17 2007