! Started logfile: J0629-1959_X_1997_08_27_yyk_uvs.log on Mon Jan  8 03:33:21 2007
obs J0629-1959_X_1997_08_27_yyk_uva.fits
! Reading UV FITS file: J0629-1959_X_1997_08_27_yyk_uva.fits
! AN table 1: 141 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.870607 visibilities/baseline/integration-bin.
! Found source: J0629-1959
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 701 lines of history.
! 
! Reading 22096 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0629-1959_X_1997_08_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.657507 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6852 mas, bmaj=1.856 mas, bpa=-3.362 degrees
! Estimated noise=1815.55 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.45522 Jy
! Component: 100  -  total flux cleaned = 0.577911 Jy
! Total flux subtracted in 100 components = 0.577911 Jy
! Clean residual min=-0.033305 max=0.052461 Jy/beam
! Clean residual mean=0.000248 rms=0.008327 Jy/beam
! Combined flux in latest and established models = 0.577911 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.577911 Jy
! 
! Correcting IF 1.
!  A total of 106 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 106 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 106 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 120 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.327243Jy  sigma=0.001507
! Fit after  self-cal, rms=0.326017Jy  sigma=0.001503
! Inverting map and beam 
! Estimated beam: bmin=0.6852 mas, bmaj=1.856 mas, bpa=-3.362 degrees
! Estimated noise=1815.9 mJy/beam.
! Added new window around map position (1.8, 0.8).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0646053 Jy
! Component: 100  -  total flux cleaned = 0.0879154 Jy
! Total flux subtracted in 100 components = 0.0879154 Jy
! Clean residual min=-0.033340 max=0.036030 Jy/beam
! Clean residual mean=0.000071 rms=0.006729 Jy/beam
! Combined flux in latest and established models = 0.665827 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 28 components and 0.665827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.315685Jy  sigma=0.001420
! Fit after  self-cal, rms=0.315223Jy  sigma=0.001416
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8931 mas, bmaj=2.517 mas, bpa=-7.221 degrees
! Estimated noise=781.421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0407607 Jy
! Component: 100  -  total flux cleaned = 0.0427341 Jy
! Component: 150  -  total flux cleaned = 0.0423291 Jy
! Component: 200  -  total flux cleaned = 0.0420431 Jy
! Total flux subtracted in 200 components = 0.0420431 Jy
! Clean residual min=-0.013542 max=0.013890 Jy/beam
! Clean residual mean=-0.000080 rms=0.002992 Jy/beam
! Combined flux in latest and established models = 0.70787 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 44 components and 0.70787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.315226Jy  sigma=0.001387
! Fit after  self-cal, rms=0.315144Jy  sigma=0.001386
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8931 x 2.517 at -7.221 degrees (North through East)
! Clean map  min=-0.011282  max=0.56323 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.998163
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.01     KP        1.03     
!   LA        1.02     MK        1.05     NL        1.00     OV        1.04     
!   PT        0.97     SC        0.92     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01407
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.96     KP        1.02     
!   LA        0.98     MK        1.02     NL        0.97     OV        1.07     
!   PT        0.92     SC        0.95     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00443
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.02     NL        0.98     OV        1.00     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.00057
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.00     OV        1.05     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.315144Jy  sigma=0.001386
! Fit after  self-cal, rms=0.309089Jy  sigma=0.001379
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309089Jy  sigma=0.001379
! Fit after  self-cal, rms=0.309056Jy  sigma=0.001379
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8929 mas, bmaj=2.482 mas, bpa=-6.355 degrees
! Estimated noise=784.845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.8, -16).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00751311 Jy
! Component: 100  -  total flux cleaned = 0.00788473 Jy
! Component: 150  -  total flux cleaned = 0.00790825 Jy
! Component: 200  -  total flux cleaned = 0.00771413 Jy
! Total flux subtracted in 200 components = 0.00771413 Jy
! Clean residual min=-0.010899 max=0.010478 Jy/beam
! Clean residual mean=-0.000170 rms=0.002195 Jy/beam
! Combined flux in latest and established models = 0.715584 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 64 components and 0.715584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.308221Jy  sigma=0.001373
! Fit after  self-cal, rms=0.308207Jy  sigma=0.001372
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.308207Jy  sigma=0.001372
! Fit after  self-cal, rms=0.300430Jy  sigma=0.001315
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454231 Jy
! Component: 100  -  total flux cleaned = 0.00455534 Jy
! Component: 150  -  total flux cleaned = 0.00474195 Jy
! Component: 200  -  total flux cleaned = 0.00457409 Jy
! Total flux subtracted in 200 components = 0.00457409 Jy
! Clean residual min=-0.008680 max=0.008103 Jy/beam
! Clean residual mean=-0.000152 rms=0.001969 Jy/beam
! Combined flux in latest and established models = 0.720158 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 75 components and 0.720158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.300216Jy  sigma=0.001313
! Fit after  self-cal, rms=0.298905Jy  sigma=0.001303
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8929 x 2.482 at -6.355 degrees (North through East)
! Clean map  min=-0.0067047  max=0.56312 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.298905Jy  sigma=0.001303
! Fit after  self-cal, rms=6.679427Jy  sigma=0.001267
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=6.679427Jy  sigma=0.001267
! Fit after  self-cal, rms=6.679916Jy  sigma=0.001265
! Inverting map and beam 
! Estimated beam: bmin=0.891 mas, bmaj=2.543 mas, bpa=-6.715 degrees
! Estimated noise=782.015 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237202 Jy
! Component: 100  -  total flux cleaned = 0.00112568 Jy
! Component: 150  -  total flux cleaned = 0.000126781 Jy
! Component: 200  -  total flux cleaned = -0.000583806 Jy
! Total flux subtracted in 200 components = -0.000583806 Jy
! Clean residual min=-0.005988 max=0.005396 Jy/beam
! Clean residual mean=-0.000063 rms=0.001352 Jy/beam
! Combined flux in latest and established models = 0.719574 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 84 components and 0.719574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=6.679875Jy  sigma=0.001263
! Fit after  self-cal, rms=6.679772Jy  sigma=0.001262
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=6.679772Jy  sigma=0.001262
! Fit after  self-cal, rms=5.479370Jy  sigma=0.001260
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=5.479370Jy  sigma=0.001260
! Fit after  self-cal, rms=5.479269Jy  sigma=0.001260
! Inverting map and beam 
! Estimated beam: bmin=0.89 mas, bmaj=2.537 mas, bpa=-6.549 degrees
! Estimated noise=781.344 mJy/beam.
! Added new window around map position (0, 7.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00572092 Jy
! Component: 100  -  total flux cleaned = 0.0053581 Jy
! Component: 150  -  total flux cleaned = 0.00489885 Jy
! Component: 200  -  total flux cleaned = 0.0046298 Jy
! Total flux subtracted in 200 components = 0.0046298 Jy
! Clean residual min=-0.005145 max=0.003969 Jy/beam
! Clean residual mean=-0.000071 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.724204 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 104 components and 0.724204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=5.479210Jy  sigma=0.001258
! Fit after  self-cal, rms=5.479046Jy  sigma=0.001258
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.345 mas, bmaj=4.988 mas, bpa=3.946 degrees
! Estimated noise=998.813 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000902979 Jy
! Component: 100  -  total flux cleaned = -0.00171944 Jy
! Component: 150  -  total flux cleaned = -0.00187342 Jy
! Component: 200  -  total flux cleaned = -0.00200332 Jy
! Total flux subtracted in 200 components = -0.00200332 Jy
! Clean residual min=-0.004543 max=0.003654 Jy/beam
! Clean residual mean=-0.000136 rms=0.001289 Jy/beam
! Combined flux in latest and established models = 0.722201 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 118 components and 0.722201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=5.479033Jy  sigma=0.001258
! Fit after  self-cal, rms=5.478903Jy  sigma=0.001258
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6845 mas, bmaj=2.023 mas, bpa=-5.413 degrees
! Estimated noise=1951.5 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.492974 Jy
! Component: 100  -  total flux cleaned = 0.599889 Jy
! Component: 150  -  total flux cleaned = 0.643338 Jy
! Component: 200  -  total flux cleaned = 0.667906 Jy
! Total flux subtracted in 200 components = 0.667906 Jy
! Clean residual min=-0.011520 max=0.012610 Jy/beam
! Clean residual mean=0.000084 rms=0.002883 Jy/beam
! Combined flux in latest and established models = 0.667905 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.667905 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.89 mas, bmaj=2.537 mas, bpa=-6.549 degrees
! Estimated noise=781.344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0244836 Jy
! Component: 100  -  total flux cleaned = 0.0377462 Jy
! Component: 150  -  total flux cleaned = 0.045891 Jy
! Component: 200  -  total flux cleaned = 0.0513308 Jy
! Total flux subtracted in 200 components = 0.0513308 Jy
! Clean residual min=-0.004944 max=0.004196 Jy/beam
! Clean residual mean=-0.000059 rms=0.001169 Jy/beam
! Combined flux in latest and established models = 0.719236 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 86 components and 0.719236 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.345 mas, bmaj=4.988 mas, bpa=3.946 degrees
! Estimated noise=998.813 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242271 Jy
! Component: 100  -  total flux cleaned = 0.00308056 Jy
! Component: 150  -  total flux cleaned = 0.0033579 Jy
! Component: 200  -  total flux cleaned = 0.00351015 Jy
! Total flux subtracted in 200 components = 0.00351015 Jy
! Clean residual min=-0.005085 max=0.003528 Jy/beam
! Clean residual mean=-0.000137 rms=0.001329 Jy/beam
! Combined flux in latest and established models = 0.722746 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 110 components and 0.722746 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.89 mas, bmaj=2.537 mas, bpa=-6.549 degrees
! Estimated noise=781.344 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108301 Jy
! Component: 100  -  total flux cleaned = 0.000212786 Jy
! Component: 150  -  total flux cleaned = 0.00030342 Jy
! Component: 200  -  total flux cleaned = 0.000300241 Jy
! Total flux subtracted in 200 components = 0.000300241 Jy
! Clean residual min=-0.004594 max=0.003919 Jy/beam
! Clean residual mean=-0.000069 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.723046 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 132 components and 0.723046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=5.479285Jy  sigma=0.001257
! Fit after  self-cal, rms=5.478889Jy  sigma=0.001257
wmodel J0629-1959_X_1997_08_27_yyk\_map.mod
! Writing 132 model components to file: J0629-1959_X_1997_08_27_yyk_map.mod
wobs J0629-1959_X_1997_08_27_yyk\_uvs.fits
! Writing UV FITS file: J0629-1959_X_1997_08_27_yyk_uvs.fits
wwins J0629-1959_X_1997_08_27_yyk\_map.win
! wwins: Wrote 4 windows to J0629-1959_X_1997_08_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00144638 Jy
! Component: 100  -  total flux cleaned = -0.00225828 Jy
! Component: 150  -  total flux cleaned = -0.00294188 Jy
! Component: 200  -  total flux cleaned = -0.00368991 Jy
! Component: 250  -  total flux cleaned = -0.00445119 Jy
! Component: 300  -  total flux cleaned = -0.00512925 Jy
! Component: 350  -  total flux cleaned = -0.00582975 Jy
! Component: 400  -  total flux cleaned = -0.00635863 Jy
! Component: 450  -  total flux cleaned = -0.00687094 Jy
! Component: 500  -  total flux cleaned = -0.00745747 Jy
! Component: 550  -  total flux cleaned = -0.00785157 Jy
! Component: 600  -  total flux cleaned = -0.00819207 Jy
! Component: 650  -  total flux cleaned = -0.00856565 Jy
! Component: 700  -  total flux cleaned = -0.00888924 Jy
! Component: 750  -  total flux cleaned = -0.0091268 Jy
! Component: 800  -  total flux cleaned = -0.00935943 Jy
! Component: 850  -  total flux cleaned = -0.00958703 Jy
! Component: 900  -  total flux cleaned = -0.00980919 Jy
! Component: 950  -  total flux cleaned = -0.0098817 Jy
! Component: 1000  -  total flux cleaned = -0.0100605 Jy
! Component: 1050  -  total flux cleaned = -0.0102352 Jy
! Component: 1100  -  total flux cleaned = -0.01027 Jy
! Component: 1150  -  total flux cleaned = -0.0103711 Jy
! Component: 1200  -  total flux cleaned = -0.010437 Jy
! Component: 1250  -  total flux cleaned = -0.010469 Jy
! Component: 1300  -  total flux cleaned = -0.0104687 Jy
! Component: 1350  -  total flux cleaned = -0.0105317 Jy
! Component: 1400  -  total flux cleaned = -0.0106245 Jy
! Component: 1450  -  total flux cleaned = -0.0107154 Jy
! Component: 1500  -  total flux cleaned = -0.0107749 Jy
! Component: 1550  -  total flux cleaned = -0.0107156 Jy
! Component: 1600  -  total flux cleaned = -0.0108036 Jy
! Component: 1650  -  total flux cleaned = -0.0108323 Jy
! Component: 1700  -  total flux cleaned = -0.010804 Jy
! Component: 1750  -  total flux cleaned = -0.0108323 Jy
! Component: 1800  -  total flux cleaned = -0.0108602 Jy
! Component: 1850  -  total flux cleaned = -0.0109147 Jy
! Component: 1900  -  total flux cleaned = -0.0109147 Jy
! Component: 1950  -  total flux cleaned = -0.0110213 Jy
! Component: 2000  -  total flux cleaned = -0.010995 Jy
! Total flux subtracted in 2048 components = -0.011047 Jy
! Clean residual min=-0.001431 max=0.001476 Jy/beam
! Clean residual mean=-0.000021 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.711999 Jy
keep
! Adding 132 model components to the UV plane model.
! The established model now contains 264 components and 0.711999 Jy
![Exited script file: muppet]
wmap "J0629-1959_X_1997_08_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.89 x 2.537 at -6.549 degrees (North through East)
! Clean map  min=-0.0031955  max=0.57609 Jy/beam
! Writing clean map to FITS file: J0629-1959_X_1997_08_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.576091 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000503781 
device "J0629-1959_X_1997_08_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J0629-1959_X_1997_08_27_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.262344 0.262344 0.524688 1.04938 2.09875 4.19751 8.39501 16.79 33.5801 67.1601
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.576 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.89 x 2.537 at -6.549 degrees (North through East)
! Clean map  min=-0.0031955  max=0.57609 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0629-1959_X_1997_08_27_yyk\_map.gif/gif"
! Attempting to open device: 'J0629-1959_X_1997_08_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0629-1959_X_1997_08_27_yyk_uvs.log closed on Mon Jan  8 03:33:30 2007