! Started logfile: J0501-0159_X_1994_08_12_yyk_uvs.log on Mon Jan 8 03:10:42 2007 obs J0501-0159_X_1994_08_12_yyk_uva.fits ! Reading UV FITS file: J0501-0159_X_1994_08_12_yyk_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.425 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0501-0159 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 4e+06 1 4e+06 ! 02 2 8.23236e+09 4e+06 1 4e+06 ! 03 3 8.41236e+09 4e+06 1 4e+06 ! 04 4 8.55236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 784 lines of history. ! ! Reading 1836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0501-0159_X_1994_08_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.98771 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.703 mas, bmaj=2.087 mas, bpa=10.37 degrees ! Estimated noise=3630.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.60939 Jy ! Component: 100 - total flux cleaned = 1.92304 Jy ! Total flux subtracted in 100 components = 1.92304 Jy ! Clean residual min=-0.046486 max=0.080127 Jy/beam ! Clean residual mean=0.000925 rms=0.018966 Jy/beam ! Combined flux in latest and established models = 1.92304 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.92304 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.432713Jy sigma=0.003241 ! Fit after self-cal, rms=0.432295Jy sigma=0.003238 ! Inverting map and beam ! Estimated beam: bmin=1.703 mas, bmaj=2.087 mas, bpa=10.37 degrees ! Estimated noise=3630.79 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.904 mas, bmaj=2.634 mas, bpa=-14.34 degrees ! Estimated noise=2238.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115851 Jy ! Component: 100 - total flux cleaned = 0.149693 Jy ! Component: 150 - total flux cleaned = 0.164182 Jy ! Component: 200 - total flux cleaned = 0.167691 Jy ! Total flux subtracted in 200 components = 0.167691 Jy ! Clean residual min=-0.023822 max=0.025016 Jy/beam ! Clean residual mean=-0.000420 rms=0.007780 Jy/beam ! Combined flux in latest and established models = 2.09074 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 30 components and 2.09073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.413053Jy sigma=0.003091 ! Fit after self-cal, rms=0.413042Jy sigma=0.003091 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.904 x 2.634 at -14.34 degrees (North through East) ! Clean map min=-0.023051 max=1.9283 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00809 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.97 KP 1.03 ! LA 1.00 MK 1.00* NL 0.98 OV 1.00* ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00559 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.98 KP 1.02 ! LA 0.98 MK 1.00* NL 0.99 OV 1.00* ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.996066 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.01 KP 0.99 ! LA 0.99 MK 1.00* NL 1.00 OV 1.00* ! PT 1.01 SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.99099 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00 KP 1.06 ! LA 1.01 MK 1.00* NL 1.01 OV 1.00* ! PT 0.98 SC 0.98 ! ! ! Fit before self-cal, rms=0.413042Jy sigma=0.003091 ! Fit after self-cal, rms=0.411762Jy sigma=0.003054 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411762Jy sigma=0.003054 ! Fit after self-cal, rms=0.411764Jy sigma=0.003054 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.9 mas, bmaj=2.632 mas, bpa=-14.77 degrees ! Estimated noise=2234.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111156 Jy ! Component: 100 - total flux cleaned = 0.0127311 Jy ! Component: 150 - total flux cleaned = 0.013634 Jy ! Component: 200 - total flux cleaned = 0.0142422 Jy ! Total flux subtracted in 200 components = 0.0142422 Jy ! Clean residual min=-0.018436 max=0.021632 Jy/beam ! Clean residual mean=-0.000174 rms=0.005627 Jy/beam ! Combined flux in latest and established models = 2.10498 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 2.10498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411506Jy sigma=0.003052 ! Fit after self-cal, rms=0.411495Jy sigma=0.003052 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411495Jy sigma=0.003052 ! Fit after self-cal, rms=0.305383Jy sigma=0.002232 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201304 Jy ! Component: 100 - total flux cleaned = 0.0286351 Jy ! Component: 150 - total flux cleaned = 0.0320286 Jy ! Component: 200 - total flux cleaned = 0.0328601 Jy ! Total flux subtracted in 200 components = 0.0328601 Jy ! Clean residual min=-0.017103 max=0.020890 Jy/beam ! Clean residual mean=0.000249 rms=0.005619 Jy/beam ! Combined flux in latest and established models = 2.13784 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 2.13784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304508Jy sigma=0.002225 ! Fit after self-cal, rms=0.285446Jy sigma=0.002077 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.9 x 2.632 at -14.77 degrees (North through East) ! Clean map min=-0.018668 max=1.9494 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285446Jy sigma=0.002077 ! Fit after self-cal, rms=0.283616Jy sigma=0.002067 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283616Jy sigma=0.002067 ! Fit after self-cal, rms=0.279397Jy sigma=0.002033 ! Inverting map and beam ! Estimated beam: bmin=1.895 mas, bmaj=2.638 mas, bpa=-15.09 degrees ! Estimated noise=2229.89 mJy/beam. ! Added new window around map position (-8.8, 7.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178374 Jy ! Component: 100 - total flux cleaned = 0.0180168 Jy ! Component: 150 - total flux cleaned = 0.0177297 Jy ! Component: 200 - total flux cleaned = 0.0171792 Jy ! Total flux subtracted in 200 components = 0.0171792 Jy ! Clean residual min=-0.011209 max=0.010645 Jy/beam ! Clean residual mean=0.000011 rms=0.003036 Jy/beam ! Combined flux in latest and established models = 2.15502 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 74 components and 2.15502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278217Jy sigma=0.002023 ! Fit after self-cal, rms=0.276968Jy sigma=0.002013 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276968Jy sigma=0.002013 ! Fit after self-cal, rms=0.274598Jy sigma=0.001995 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274598Jy sigma=0.001995 ! Fit after self-cal, rms=0.274226Jy sigma=0.001992 ! Inverting map and beam ! Estimated beam: bmin=1.892 mas, bmaj=2.637 mas, bpa=-15.2 degrees ! Estimated noise=2225.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326752 Jy ! Component: 100 - total flux cleaned = 0.00285023 Jy ! Component: 150 - total flux cleaned = 0.00234772 Jy ! Component: 200 - total flux cleaned = 0.00203716 Jy ! Total flux subtracted in 200 components = 0.00203716 Jy ! Clean residual min=-0.008717 max=0.008449 Jy/beam ! Clean residual mean=0.000039 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 2.15705 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 2.15705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274019Jy sigma=0.001990 ! Fit after self-cal, rms=0.273864Jy sigma=0.001989 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.321 mas, bmaj=3.435 mas, bpa=-21.06 degrees ! Estimated noise=2418.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179095 Jy ! Component: 100 - total flux cleaned = -0.00012807 Jy ! Component: 150 - total flux cleaned = -0.000510782 Jy ! Component: 200 - total flux cleaned = -0.00077652 Jy ! Total flux subtracted in 200 components = -0.00077652 Jy ! Clean residual min=-0.007139 max=0.007351 Jy/beam ! Clean residual mean=0.000066 rms=0.002272 Jy/beam ! Combined flux in latest and established models = 2.15628 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 2.15628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273807Jy sigma=0.001988 ! Fit after self-cal, rms=0.273714Jy sigma=0.001988 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.706 mas, bmaj=2.083 mas, bpa=9.109 degrees ! Estimated noise=3622.72 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.62083 Jy ! Component: 100 - total flux cleaned = 1.93274 Jy ! Component: 150 - total flux cleaned = 2.02873 Jy ! Component: 200 - total flux cleaned = 2.07458 Jy ! Total flux subtracted in 200 components = 2.07458 Jy ! Clean residual min=-0.022904 max=0.022535 Jy/beam ! Clean residual mean=0.000570 rms=0.006999 Jy/beam ! Combined flux in latest and established models = 2.07458 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 2.07458 Jy ! Inverting map and beam ! Estimated beam: bmin=1.892 mas, bmaj=2.637 mas, bpa=-15.2 degrees ! Estimated noise=2225.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428563 Jy ! Component: 100 - total flux cleaned = 0.0597861 Jy ! Component: 150 - total flux cleaned = 0.0676863 Jy ! Component: 200 - total flux cleaned = 0.0728639 Jy ! Total flux subtracted in 200 components = 0.0728639 Jy ! Clean residual min=-0.011906 max=0.008131 Jy/beam ! Clean residual mean=0.000244 rms=0.002797 Jy/beam ! Combined flux in latest and established models = 2.14744 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 68 components and 2.14744 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.321 mas, bmaj=3.435 mas, bpa=-21.06 degrees ! Estimated noise=2418.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055752 Jy ! Component: 100 - total flux cleaned = 0.00656588 Jy ! Component: 150 - total flux cleaned = 0.00732159 Jy ! Component: 200 - total flux cleaned = 0.00794342 Jy ! Total flux subtracted in 200 components = 0.00794342 Jy ! Clean residual min=-0.008313 max=0.007620 Jy/beam ! Clean residual mean=0.000165 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 2.15539 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 90 components and 2.15539 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.892 mas, bmaj=2.637 mas, bpa=-15.2 degrees ! Estimated noise=2225.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771506 Jy ! Component: 100 - total flux cleaned = 0.000911188 Jy ! Component: 150 - total flux cleaned = 0.0010193 Jy ! Component: 200 - total flux cleaned = 0.00101443 Jy ! Total flux subtracted in 200 components = 0.00101443 Jy ! Clean residual min=-0.007837 max=0.007179 Jy/beam ! Clean residual mean=0.000099 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 2.1564 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 2.1564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273678Jy sigma=0.001987 ! Fit after self-cal, rms=0.273610Jy sigma=0.001987 wmodel J0501-0159_X_1994_08_12_yyk\_map.mod ! Writing 101 model components to file: J0501-0159_X_1994_08_12_yyk_map.mod wobs J0501-0159_X_1994_08_12_yyk\_uvs.fits ! Writing UV FITS file: J0501-0159_X_1994_08_12_yyk_uvs.fits wwins J0501-0159_X_1994_08_12_yyk\_map.win ! wwins: Wrote 2 windows to J0501-0159_X_1994_08_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220335 Jy ! Component: 100 - total flux cleaned = -0.00314872 Jy ! Component: 150 - total flux cleaned = -0.0033568 Jy ! Component: 200 - total flux cleaned = -0.00392286 Jy ! Component: 250 - total flux cleaned = -0.00471421 Jy ! Component: 300 - total flux cleaned = -0.00536855 Jy ! Component: 350 - total flux cleaned = -0.00606377 Jy ! Component: 400 - total flux cleaned = -0.00628395 Jy ! Component: 450 - total flux cleaned = -0.00656034 Jy ! Component: 500 - total flux cleaned = -0.00682128 Jy ! Component: 550 - total flux cleaned = -0.00719793 Jy ! Component: 600 - total flux cleaned = -0.00756066 Jy ! Component: 650 - total flux cleaned = -0.00814288 Jy ! Component: 700 - total flux cleaned = -0.00870318 Jy ! Component: 750 - total flux cleaned = -0.0094097 Jy ! Component: 800 - total flux cleaned = -0.0100458 Jy ! Component: 850 - total flux cleaned = -0.0107706 Jy ! Component: 900 - total flux cleaned = -0.0113783 Jy ! Component: 950 - total flux cleaned = -0.0120234 Jy ! Component: 1000 - total flux cleaned = -0.0127997 Jy ! Component: 1050 - total flux cleaned = -0.0134167 Jy ! Component: 1100 - total flux cleaned = -0.0139765 Jy ! Component: 1150 - total flux cleaned = -0.0145287 Jy ! Component: 1200 - total flux cleaned = -0.0150281 Jy ! Component: 1250 - total flux cleaned = -0.0155207 Jy ! Component: 1300 - total flux cleaned = -0.0159626 Jy ! Component: 1350 - total flux cleaned = -0.0164868 Jy ! Component: 1400 - total flux cleaned = -0.0169609 Jy ! Component: 1450 - total flux cleaned = -0.0174712 Jy ! Component: 1500 - total flux cleaned = -0.01785 Jy ! Component: 1550 - total flux cleaned = -0.0182256 Jy ! Component: 1600 - total flux cleaned = -0.0185974 Jy ! Component: 1650 - total flux cleaned = -0.0190066 Jy ! Component: 1700 - total flux cleaned = -0.0193317 Jy ! Component: 1750 - total flux cleaned = -0.0195339 Jy ! Component: 1800 - total flux cleaned = -0.0197747 Jy ! Component: 1850 - total flux cleaned = -0.0199351 Jy ! Component: 1900 - total flux cleaned = -0.0202137 Jy ! Component: 1950 - total flux cleaned = -0.0204115 Jy ! Component: 2000 - total flux cleaned = -0.0206084 Jy ! Total flux subtracted in 2048 components = -0.0208044 Jy ! Clean residual min=-0.002426 max=0.002231 Jy/beam ! Clean residual mean=-0.000076 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 2.1356 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 224 components and 2.1356 Jy ![Exited script file: muppet] wmap "J0501-0159_X_1994_08_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.892 x 2.637 at -15.2 degrees (North through East) ! Clean map min=-0.012478 max=1.9428 Jy/beam ! Writing clean map to FITS file: J0501-0159_X_1994_08_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.94282 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000743557 device "J0501-0159_X_1994_08_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0501-0159_X_1994_08_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.114816 0.114816 0.229632 0.459265 0.91853 1.83706 3.67412 7.34824 14.6965 29.3929 58.7859 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.942 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.892 x 2.637 at -15.2 degrees (North through East) ! Clean map min=-0.012478 max=1.9428 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0501-0159_X_1994_08_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0501-0159_X_1994_08_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0501-0159_X_1994_08_12_yyk_uvs.log closed on Mon Jan 8 03:10:48 2007