! Started logfile: J0501-0159_S_1997_05_07_yyk_uvs.log on Sun Jan 7 16:23:09 2007 obs J0501-0159_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0501-0159_S_1997_05_07_yyk_uva.fits ! AN table 1: 139 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973781 visibilities/baseline/integration-bin. ! Found source: J0501-0159 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 24364 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0501-0159_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.42003 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.07 mas, bpa=-3.357 degrees ! Estimated noise=1378.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.10276 Jy ! Component: 100 - total flux cleaned = 1.35409 Jy ! Total flux subtracted in 100 components = 1.35409 Jy ! Clean residual min=-0.051127 max=0.082091 Jy/beam ! Clean residual mean=0.002102 rms=0.016902 Jy/beam ! Combined flux in latest and established models = 1.35409 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.35409 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.413121Jy sigma=0.001782 ! Fit after self-cal, rms=0.408080Jy sigma=0.001765 ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.07 mas, bpa=-3.357 degrees ! Estimated noise=1378.88 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=8.644 mas, bpa=-5.458 degrees ! Estimated noise=1010.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.150183 Jy ! Component: 100 - total flux cleaned = 0.211196 Jy ! Component: 150 - total flux cleaned = 0.242993 Jy ! Component: 200 - total flux cleaned = 0.253691 Jy ! Total flux subtracted in 200 components = 0.253691 Jy ! Clean residual min=-0.041365 max=0.068699 Jy/beam ! Clean residual mean=0.001692 rms=0.015380 Jy/beam ! Combined flux in latest and established models = 1.60778 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 1.60778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364843Jy sigma=0.001574 ! Fit after self-cal, rms=0.364531Jy sigma=0.001572 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.51 x 8.644 at -5.458 degrees (North through East) ! Clean map min=-0.039401 max=1.3062 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02701 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 1.00 KP 0.87 ! LA 0.97 MK 0.98 NL 1.00* OV 1.12 ! PT 0.92 SC 0.83 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.975538 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.12 HN 1.09 KP 1.01 ! LA 1.06 MK 1.05 NL 1.02 OV 1.05 ! PT 0.92 SC 0.91 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04942 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 0.96 KP 0.89 ! LA 0.78 MK 0.87 NL 0.95 OV 0.98 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.982034 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.10 HN 1.08 KP 0.93 ! LA 0.87 MK 1.05 NL 1.11 OV 1.14 ! PT 0.89 SC 1.01 ! ! ! Fit before self-cal, rms=0.364531Jy sigma=0.001572 ! Fit after self-cal, rms=0.327285Jy sigma=0.001421 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327285Jy sigma=0.001421 ! Fit after self-cal, rms=0.327317Jy sigma=0.001421 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=8.541 mas, bpa=-4.631 degrees ! Estimated noise=1013.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, 4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0696352 Jy ! Component: 100 - total flux cleaned = 0.102306 Jy ! Component: 150 - total flux cleaned = 0.111505 Jy ! Component: 200 - total flux cleaned = 0.112166 Jy ! Total flux subtracted in 200 components = 0.112166 Jy ! Clean residual min=-0.018694 max=0.019717 Jy/beam ! Clean residual mean=-0.000188 rms=0.005436 Jy/beam ! Combined flux in latest and established models = 1.71994 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 1.71994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316875Jy sigma=0.001369 ! Fit after self-cal, rms=0.316003Jy sigma=0.001365 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316003Jy sigma=0.001365 ! Fit after self-cal, rms=0.306703Jy sigma=0.001325 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139051 Jy ! Component: 100 - total flux cleaned = 0.0139354 Jy ! Component: 150 - total flux cleaned = 0.0139248 Jy ! Component: 200 - total flux cleaned = 0.0134753 Jy ! Total flux subtracted in 200 components = 0.0134753 Jy ! Clean residual min=-0.019933 max=0.016750 Jy/beam ! Clean residual mean=-0.000295 rms=0.004991 Jy/beam ! Combined flux in latest and established models = 1.73342 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 71 components and 1.73342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305151Jy sigma=0.001318 ! Fit after self-cal, rms=0.303688Jy sigma=0.001312 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 8.541 at -4.631 degrees (North through East) ! Clean map min=-0.019481 max=1.3151 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303688Jy sigma=0.001312 ! Fit after self-cal, rms=0.283057Jy sigma=0.001228 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283057Jy sigma=0.001228 ! Fit after self-cal, rms=0.282663Jy sigma=0.001227 ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=8.505 mas, bpa=-4.307 degrees ! Estimated noise=1006.72 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011304 Jy ! Component: 100 - total flux cleaned = 0.0141204 Jy ! Component: 150 - total flux cleaned = 0.0148861 Jy ! Component: 200 - total flux cleaned = 0.015532 Jy ! Total flux subtracted in 200 components = 0.015532 Jy ! Clean residual min=-0.015541 max=0.012613 Jy/beam ! Clean residual mean=-0.000174 rms=0.003066 Jy/beam ! Combined flux in latest and established models = 1.74895 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 90 components and 1.74895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281623Jy sigma=0.001221 ! Fit after self-cal, rms=0.281367Jy sigma=0.001220 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281367Jy sigma=0.001220 ! Fit after self-cal, rms=0.280586Jy sigma=0.001218 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280586Jy sigma=0.001218 ! Fit after self-cal, rms=0.280520Jy sigma=0.001217 ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=8.504 mas, bpa=-4.196 degrees ! Estimated noise=1005.34 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351047 Jy ! Component: 100 - total flux cleaned = 0.00416711 Jy ! Component: 150 - total flux cleaned = 0.00418474 Jy ! Component: 200 - total flux cleaned = 0.00443778 Jy ! Total flux subtracted in 200 components = 0.00443778 Jy ! Clean residual min=-0.014410 max=0.011824 Jy/beam ! Clean residual mean=-0.000182 rms=0.002756 Jy/beam ! Combined flux in latest and established models = 1.75339 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 1.75339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280023Jy sigma=0.001215 ! Fit after self-cal, rms=0.279940Jy sigma=0.001215 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.246 mas, bmaj=13.28 mas, bpa=4.491 degrees ! Estimated noise=1243.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169659 Jy ! Component: 100 - total flux cleaned = 0.00231954 Jy ! Component: 150 - total flux cleaned = 0.00233493 Jy ! Component: 200 - total flux cleaned = 0.00175924 Jy ! Total flux subtracted in 200 components = 0.00175924 Jy ! Clean residual min=-0.009426 max=0.008027 Jy/beam ! Clean residual mean=-0.000377 rms=0.002846 Jy/beam ! Combined flux in latest and established models = 1.75515 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 106 components and 1.75515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279940Jy sigma=0.001214 ! Fit after self-cal, rms=0.279755Jy sigma=0.001213 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=7.005 mas, bpa=-2.573 degrees ! Estimated noise=1369.28 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.10232 Jy ! Component: 100 - total flux cleaned = 1.36669 Jy ! Component: 150 - total flux cleaned = 1.47812 Jy ! Component: 200 - total flux cleaned = 1.5452 Jy ! Total flux subtracted in 200 components = 1.5452 Jy ! Clean residual min=-0.020289 max=0.053416 Jy/beam ! Clean residual mean=0.000709 rms=0.007368 Jy/beam ! Combined flux in latest and established models = 1.5452 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.5452 Jy ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=8.504 mas, bpa=-4.196 degrees ! Estimated noise=1005.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0798526 Jy ! Component: 100 - total flux cleaned = 0.123999 Jy ! Component: 150 - total flux cleaned = 0.15294 Jy ! Component: 200 - total flux cleaned = 0.172671 Jy ! Total flux subtracted in 200 components = 0.172671 Jy ! Clean residual min=-0.009703 max=0.011210 Jy/beam ! Clean residual mean=0.000074 rms=0.003067 Jy/beam ! Combined flux in latest and established models = 1.71787 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 71 components and 1.71787 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.246 mas, bmaj=13.28 mas, bpa=4.491 degrees ! Estimated noise=1243.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186629 Jy ! Component: 100 - total flux cleaned = 0.0248795 Jy ! Component: 150 - total flux cleaned = 0.0277669 Jy ! Component: 200 - total flux cleaned = 0.0290113 Jy ! Total flux subtracted in 200 components = 0.0290113 Jy ! Clean residual min=-0.008914 max=0.006666 Jy/beam ! Clean residual mean=-0.000262 rms=0.002534 Jy/beam ! Combined flux in latest and established models = 1.74688 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 123 components and 1.74688 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=8.504 mas, bpa=-4.196 degrees ! Estimated noise=1005.34 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000990737 Jy ! Component: 100 - total flux cleaned = -0.0009956 Jy ! Component: 150 - total flux cleaned = -0.000983492 Jy ! Component: 200 - total flux cleaned = -0.000720276 Jy ! Total flux subtracted in 200 components = -0.000720276 Jy ! Clean residual min=-0.009288 max=0.007106 Jy/beam ! Clean residual mean=-0.000137 rms=0.002106 Jy/beam ! Combined flux in latest and established models = 1.74616 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 147 components and 1.74616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278793Jy sigma=0.001210 ! Fit after self-cal, rms=0.278538Jy sigma=0.001209 wmodel J0501-0159_S_1997_05_07_yyk\_map.mod ! Writing 147 model components to file: J0501-0159_S_1997_05_07_yyk_map.mod wobs J0501-0159_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0501-0159_S_1997_05_07_yyk_uvs.fits wwins J0501-0159_S_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J0501-0159_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00331143 Jy ! Component: 100 - total flux cleaned = -0.00357226 Jy ! Component: 150 - total flux cleaned = -0.00392975 Jy ! Component: 200 - total flux cleaned = -0.00382253 Jy ! Component: 250 - total flux cleaned = -0.00392139 Jy ! Component: 300 - total flux cleaned = -0.00411861 Jy ! Component: 350 - total flux cleaned = -0.00392869 Jy ! Component: 400 - total flux cleaned = -0.00411251 Jy ! Component: 450 - total flux cleaned = -0.00420202 Jy ! Component: 500 - total flux cleaned = -0.00446011 Jy ! Component: 550 - total flux cleaned = -0.00470789 Jy ! Component: 600 - total flux cleaned = -0.00511075 Jy ! Component: 650 - total flux cleaned = -0.00534781 Jy ! Component: 700 - total flux cleaned = -0.00581013 Jy ! Component: 750 - total flux cleaned = -0.00603604 Jy ! Component: 800 - total flux cleaned = -0.0064027 Jy ! Component: 850 - total flux cleaned = -0.0066894 Jy ! Component: 900 - total flux cleaned = -0.00689905 Jy ! Component: 950 - total flux cleaned = -0.00696861 Jy ! Component: 1000 - total flux cleaned = -0.00750034 Jy ! Component: 1050 - total flux cleaned = -0.0075008 Jy ! Component: 1100 - total flux cleaned = -0.00782132 Jy ! Component: 1150 - total flux cleaned = -0.00807148 Jy ! Component: 1200 - total flux cleaned = -0.00843727 Jy ! Component: 1250 - total flux cleaned = -0.00849799 Jy ! Component: 1300 - total flux cleaned = -0.00896858 Jy ! Component: 1350 - total flux cleaned = -0.00908359 Jy ! Component: 1400 - total flux cleaned = -0.00925317 Jy ! Component: 1450 - total flux cleaned = -0.00958625 Jy ! Component: 1500 - total flux cleaned = -0.0097491 Jy ! Component: 1550 - total flux cleaned = -0.00996244 Jy ! Component: 1600 - total flux cleaned = -0.0100145 Jy ! Component: 1650 - total flux cleaned = -0.0103245 Jy ! Component: 1700 - total flux cleaned = -0.0104254 Jy ! Component: 1750 - total flux cleaned = -0.0106253 Jy ! Component: 1800 - total flux cleaned = -0.0107241 Jy ! Component: 1850 - total flux cleaned = -0.0108685 Jy ! Component: 1900 - total flux cleaned = -0.0109151 Jy ! Component: 1950 - total flux cleaned = -0.0109152 Jy ! Component: 2000 - total flux cleaned = -0.0109616 Jy ! Total flux subtracted in 2048 components = -0.011052 Jy ! Clean residual min=-0.003144 max=0.002250 Jy/beam ! Clean residual mean=-0.000081 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 1.73511 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 273 components and 1.73511 Jy ![Exited script file: muppet] wmap "J0501-0159_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.508 x 8.504 at -4.196 degrees (North through East) ! Clean map min=-0.0068042 max=1.3227 Jy/beam ! Writing clean map to FITS file: J0501-0159_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.32273 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000914419 device "J0501-0159_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0501-0159_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.207393 0.207393 0.414786 0.829572 1.65914 3.31829 6.63657 13.2731 26.5463 53.0926 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.322 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.508 x 8.504 at -4.196 degrees (North through East) ! Clean map min=-0.0068042 max=1.3227 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0501-0159_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0501-0159_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0501-0159_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 16:23:17 2007