! Started logfile: J0501-0159_S_1996_06_07_yyk_uvs.log on Sun Jan 7 16:23:03 2007 obs J0501-0159_S_1996_06_07_yyk_uva.fits ! Reading UV FITS file: J0501-0159_S_1996_06_07_yyk_uva.fits ! AN table 1: 53 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968973 visibilities/baseline/integration-bin. ! Found source: J0501-0159 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 8e+06 1 8e+06 ! 02 2 2.23424e+09 8e+06 1 8e+06 ! 03 3 2.29424e+09 8e+06 1 8e+06 ! 04 4 2.32424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 689 lines of history. ! ! Reading 9244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0501-0159_S_1996_06_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.72045 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=7.075 mas, bpa=-1.347 degrees ! Estimated noise=2645.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.37681 Jy ! Component: 100 - total flux cleaned = 1.65959 Jy ! Total flux subtracted in 100 components = 1.65959 Jy ! Clean residual min=-0.065847 max=0.111310 Jy/beam ! Clean residual mean=0.000534 rms=0.021864 Jy/beam ! Combined flux in latest and established models = 1.65959 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.65959 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.419735Jy sigma=0.001848 ! Fit after self-cal, rms=0.413444Jy sigma=0.001825 ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=7.075 mas, bpa=-1.347 degrees ! Estimated noise=2645.1 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=8.553 mas, bpa=-5.289 degrees ! Estimated noise=1547.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.135898 Jy ! Component: 100 - total flux cleaned = 0.194223 Jy ! Component: 150 - total flux cleaned = 0.225456 Jy ! Component: 200 - total flux cleaned = 0.232711 Jy ! Total flux subtracted in 200 components = 0.232711 Jy ! Clean residual min=-0.054051 max=0.081425 Jy/beam ! Clean residual mean=0.000164 rms=0.019082 Jy/beam ! Combined flux in latest and established models = 1.8923 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 1.8923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374757Jy sigma=0.001664 ! Fit after self-cal, rms=0.374436Jy sigma=0.001663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.742 x 8.553 at -5.289 degrees (North through East) ! Clean map min=-0.052897 max=1.6134 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02553 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.11 HN 1.03 KP 0.88 ! LA 0.96 MK 0.97 NL 0.92 OV 1.10 ! PT 0.94 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.972983 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.16 HN 1.14 KP 0.91 ! LA 1.05 MK 1.04 NL 1.00 OV 1.06 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04115 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 0.99 KP 0.90 ! LA 0.79 MK 0.87 NL 0.97 OV 0.99 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.994679 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 1.08 KP 0.96 ! LA 0.88 MK 1.03 NL 1.07 OV 0.94 ! PT 0.99 SC 1.00 ! ! ! Fit before self-cal, rms=0.374436Jy sigma=0.001663 ! Fit after self-cal, rms=0.323183Jy sigma=0.001447 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323183Jy sigma=0.001447 ! Fit after self-cal, rms=0.323192Jy sigma=0.001447 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.733 mas, bmaj=8.434 mas, bpa=-4.15 degrees ! Estimated noise=1555.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, 7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0654859 Jy ! Component: 100 - total flux cleaned = 0.0978519 Jy ! Component: 150 - total flux cleaned = 0.113256 Jy ! Component: 200 - total flux cleaned = 0.115399 Jy ! Total flux subtracted in 200 components = 0.115399 Jy ! Clean residual min=-0.019775 max=0.025516 Jy/beam ! Clean residual mean=0.000077 rms=0.005811 Jy/beam ! Combined flux in latest and established models = 2.0077 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 53 components and 2.0077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313800Jy sigma=0.001396 ! Fit after self-cal, rms=0.313309Jy sigma=0.001394 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313309Jy sigma=0.001394 ! Fit after self-cal, rms=0.308727Jy sigma=0.001373 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767072 Jy ! Component: 100 - total flux cleaned = 0.0099733 Jy ! Component: 150 - total flux cleaned = 0.0104871 Jy ! Component: 200 - total flux cleaned = 0.0109603 Jy ! Total flux subtracted in 200 components = 0.0109603 Jy ! Clean residual min=-0.015864 max=0.021619 Jy/beam ! Clean residual mean=0.000048 rms=0.005000 Jy/beam ! Combined flux in latest and established models = 2.01866 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 73 components and 2.01866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307205Jy sigma=0.001366 ! Fit after self-cal, rms=0.306075Jy sigma=0.001361 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.733 x 8.434 at -4.15 degrees (North through East) ! Clean map min=-0.015023 max=1.6318 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306075Jy sigma=0.001361 ! Fit after self-cal, rms=0.288638Jy sigma=0.001291 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288638Jy sigma=0.001291 ! Fit after self-cal, rms=0.288361Jy sigma=0.001290 ! Inverting map and beam ! Estimated beam: bmin=3.732 mas, bmaj=8.401 mas, bpa=-3.878 degrees ! Estimated noise=1547.12 mJy/beam. ! Added new window around map position (14, -43.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207205 Jy ! Component: 100 - total flux cleaned = 0.0202631 Jy ! Component: 150 - total flux cleaned = 0.0198534 Jy ! Component: 200 - total flux cleaned = 0.0194868 Jy ! Total flux subtracted in 200 components = 0.0194868 Jy ! Clean residual min=-0.013466 max=0.015525 Jy/beam ! Clean residual mean=0.000071 rms=0.003494 Jy/beam ! Combined flux in latest and established models = 2.03814 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 2.03814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286264Jy sigma=0.001281 ! Fit after self-cal, rms=0.286147Jy sigma=0.001280 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286147Jy sigma=0.001280 ! Fit after self-cal, rms=0.285289Jy sigma=0.001278 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285289Jy sigma=0.001278 ! Fit after self-cal, rms=0.285262Jy sigma=0.001278 ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=8.402 mas, bpa=-3.858 degrees ! Estimated noise=1543.56 mJy/beam. ! Added new window around map position (-1.5, -28). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118392 Jy ! Component: 100 - total flux cleaned = 0.0138197 Jy ! Component: 150 - total flux cleaned = 0.013505 Jy ! Component: 200 - total flux cleaned = 0.0135119 Jy ! Total flux subtracted in 200 components = 0.0135119 Jy ! Clean residual min=-0.010847 max=0.009497 Jy/beam ! Clean residual mean=0.000045 rms=0.002795 Jy/beam ! Combined flux in latest and established models = 2.05166 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 118 components and 2.05166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284243Jy sigma=0.001273 ! Fit after self-cal, rms=0.284217Jy sigma=0.001273 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.834 mas, bmaj=13.16 mas, bpa=-12.45 degrees ! Estimated noise=1907.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382207 Jy ! Component: 100 - total flux cleaned = -0.00128727 Jy ! Component: 150 - total flux cleaned = -0.00245763 Jy ! Component: 200 - total flux cleaned = -0.00349224 Jy ! Total flux subtracted in 200 components = -0.00349224 Jy ! Clean residual min=-0.009704 max=0.011475 Jy/beam ! Clean residual mean=0.000078 rms=0.003165 Jy/beam ! Combined flux in latest and established models = 2.04816 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 131 components and 2.04816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284138Jy sigma=0.001273 ! Fit after self-cal, rms=0.284064Jy sigma=0.001273 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=7.037 mas, bpa=-0.5182 degrees ! Estimated noise=2615.95 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.36649 Jy ! Component: 100 - total flux cleaned = 1.65303 Jy ! Component: 150 - total flux cleaned = 1.76745 Jy ! Component: 200 - total flux cleaned = 1.8306 Jy ! Total flux subtracted in 200 components = 1.8306 Jy ! Clean residual min=-0.027492 max=0.046382 Jy/beam ! Clean residual mean=0.000299 rms=0.008893 Jy/beam ! Combined flux in latest and established models = 1.8306 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 1.8306 Jy ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=8.402 mas, bpa=-3.858 degrees ! Estimated noise=1543.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0774312 Jy ! Component: 100 - total flux cleaned = 0.120788 Jy ! Component: 150 - total flux cleaned = 0.148913 Jy ! Component: 200 - total flux cleaned = 0.168756 Jy ! Total flux subtracted in 200 components = 0.168756 Jy ! Clean residual min=-0.010582 max=0.013881 Jy/beam ! Clean residual mean=0.000131 rms=0.003615 Jy/beam ! Combined flux in latest and established models = 1.99936 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 67 components and 1.99936 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.834 mas, bmaj=13.16 mas, bpa=-12.45 degrees ! Estimated noise=1907.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189812 Jy ! Component: 100 - total flux cleaned = 0.0289418 Jy ! Component: 150 - total flux cleaned = 0.0333934 Jy ! Component: 200 - total flux cleaned = 0.0349183 Jy ! Total flux subtracted in 200 components = 0.0349183 Jy ! Clean residual min=-0.010030 max=0.011802 Jy/beam ! Clean residual mean=0.000091 rms=0.003114 Jy/beam ! Combined flux in latest and established models = 2.03427 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 98 components and 2.03427 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=8.402 mas, bpa=-3.858 degrees ! Estimated noise=1543.56 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148423 Jy ! Component: 100 - total flux cleaned = -0.00149036 Jy ! Component: 150 - total flux cleaned = -0.00119533 Jy ! Component: 200 - total flux cleaned = -0.000928788 Jy ! Total flux subtracted in 200 components = -0.000928788 Jy ! Clean residual min=-0.008647 max=0.008012 Jy/beam ! Clean residual mean=0.000049 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 2.03335 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 2.03335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284080Jy sigma=0.001272 ! Fit after self-cal, rms=0.283892Jy sigma=0.001271 wmodel J0501-0159_S_1996_06_07_yyk\_map.mod ! Writing 125 model components to file: J0501-0159_S_1996_06_07_yyk_map.mod wobs J0501-0159_S_1996_06_07_yyk\_uvs.fits ! Writing UV FITS file: J0501-0159_S_1996_06_07_yyk_uvs.fits wwins J0501-0159_S_1996_06_07_yyk\_map.win ! wwins: Wrote 5 windows to J0501-0159_S_1996_06_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012056 Jy ! Component: 100 - total flux cleaned = 0.00183119 Jy ! Component: 150 - total flux cleaned = 0.0020625 Jy ! Component: 200 - total flux cleaned = 0.00184344 Jy ! Component: 250 - total flux cleaned = 0.00174134 Jy ! Component: 300 - total flux cleaned = 0.00154244 Jy ! Component: 350 - total flux cleaned = 0.00135355 Jy ! Component: 400 - total flux cleaned = 0.00144322 Jy ! Component: 450 - total flux cleaned = 0.00118461 Jy ! Component: 500 - total flux cleaned = 0.00127009 Jy ! Component: 550 - total flux cleaned = 0.00151289 Jy ! Component: 600 - total flux cleaned = 0.00182523 Jy ! Component: 650 - total flux cleaned = 0.00242783 Jy ! Component: 700 - total flux cleaned = 0.00264579 Jy ! Component: 750 - total flux cleaned = 0.00321512 Jy ! Component: 800 - total flux cleaned = 0.00363231 Jy ! Component: 850 - total flux cleaned = 0.00410503 Jy ! Component: 900 - total flux cleaned = 0.00436984 Jy ! Component: 950 - total flux cleaned = 0.00488425 Jy ! Component: 1000 - total flux cleaned = 0.00532192 Jy ! Component: 1050 - total flux cleaned = 0.00550559 Jy ! Component: 1100 - total flux cleaned = 0.00592292 Jy ! Component: 1150 - total flux cleaned = 0.00609793 Jy ! Component: 1200 - total flux cleaned = 0.00638342 Jy ! Component: 1250 - total flux cleaned = 0.00638456 Jy ! Component: 1300 - total flux cleaned = 0.00676684 Jy ! Component: 1350 - total flux cleaned = 0.0067662 Jy ! Component: 1400 - total flux cleaned = 0.00687118 Jy ! Component: 1450 - total flux cleaned = 0.00687036 Jy ! Component: 1500 - total flux cleaned = 0.00697116 Jy ! Component: 1550 - total flux cleaned = 0.00716862 Jy ! Component: 1600 - total flux cleaned = 0.00726505 Jy ! Component: 1650 - total flux cleaned = 0.00745516 Jy ! Component: 1700 - total flux cleaned = 0.00759482 Jy ! Component: 1750 - total flux cleaned = 0.00782335 Jy ! Component: 1800 - total flux cleaned = 0.0080036 Jy ! Component: 1850 - total flux cleaned = 0.00844475 Jy ! Component: 1900 - total flux cleaned = 0.00853089 Jy ! Component: 1950 - total flux cleaned = 0.00887129 Jy ! Component: 2000 - total flux cleaned = 0.00903923 Jy ! Total flux subtracted in 2048 components = 0.00920382 Jy ! Clean residual min=-0.002361 max=0.002767 Jy/beam ! Clean residual mean=0.000021 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 2.04255 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 252 components and 2.04255 Jy ![Exited script file: muppet] wmap "J0501-0159_S_1996_06_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.734 x 8.402 at -3.858 degrees (North through East) ! Clean map min=-0.0052469 max=1.6264 Jy/beam ! Writing clean map to FITS file: J0501-0159_S_1996_06_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.62641 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000827259 device "J0501-0159_S_1996_06_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0501-0159_S_1996_06_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.152592 0.152592 0.305185 0.610369 1.22074 2.44148 4.88295 9.76591 19.5318 39.0636 78.1273 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.626 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.734 x 8.402 at -3.858 degrees (North through East) ! Clean map min=-0.0052469 max=1.6264 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0501-0159_S_1996_06_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0501-0159_S_1996_06_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0501-0159_S_1996_06_07_yyk_uvs.log closed on Sun Jan 7 16:23:09 2007