! Started logfile: J0501-0159_S_1996_03_13_yyk_uvs.log on Sun Jan 7 16:22:50 2007 obs J0501-0159_S_1996_03_13_yyk_uva.fits ! Reading UV FITS file: J0501-0159_S_1996_03_13_yyk_uva.fits ! AN table 1: 67 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.919403 visibilities/baseline/integration-bin. ! Found source: J0501-0159 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 655 lines of history. ! ! Reading 11088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0501-0159_S_1996_03_13_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.74665 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.257 mas, bpa=-4.523 degrees ! Estimated noise=2246.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.40353 Jy ! Component: 100 - total flux cleaned = 1.69173 Jy ! Total flux subtracted in 100 components = 1.69173 Jy ! Clean residual min=-0.068853 max=0.112415 Jy/beam ! Clean residual mean=0.000604 rms=0.022983 Jy/beam ! Combined flux in latest and established models = 1.69173 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.69173 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.465223Jy sigma=0.002236 ! Fit after self-cal, rms=0.461913Jy sigma=0.002224 ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.257 mas, bpa=-4.523 degrees ! Estimated noise=2247.77 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.363 mas, bmaj=8.532 mas, bpa=-5.901 degrees ! Estimated noise=1305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130364 Jy ! Component: 100 - total flux cleaned = 0.19085 Jy ! Component: 150 - total flux cleaned = 0.22382 Jy ! Component: 200 - total flux cleaned = 0.231427 Jy ! Total flux subtracted in 200 components = 0.231427 Jy ! Clean residual min=-0.059025 max=0.098996 Jy/beam ! Clean residual mean=0.000211 rms=0.020537 Jy/beam ! Combined flux in latest and established models = 1.92316 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 1.92315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.426367Jy sigma=0.002078 ! Fit after self-cal, rms=0.425967Jy sigma=0.002076 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.363 x 8.532 at -5.901 degrees (North through East) ! Clean map min=-0.05887 max=1.6099 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03335 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.08 HN 1.03 KP 0.89 ! LA 0.90 MK 1.01 NL 0.90 OV 1.11 ! PT 0.96 SC 0.84 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.985091 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.16 HN 1.11 KP 0.92 ! LA 1.02 MK 1.03 NL 0.95 OV 1.07 ! PT 0.93 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02461 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.09 HN 0.98 KP 0.93 ! LA 0.79 MK 0.92 NL 0.95 OV 0.98 ! PT 1.12 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.990055 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.13 HN 1.06 KP 0.97 ! LA 0.88 MK 1.07 NL 1.04 OV 0.97 ! PT 0.99 SC 1.02 ! ! ! Fit before self-cal, rms=0.425967Jy sigma=0.002076 ! Fit after self-cal, rms=0.374170Jy sigma=0.001857 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374170Jy sigma=0.001857 ! Fit after self-cal, rms=0.374161Jy sigma=0.001857 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=8.418 mas, bpa=-4.964 degrees ! Estimated noise=1318.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, 5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785403 Jy ! Component: 100 - total flux cleaned = 0.116921 Jy ! Component: 150 - total flux cleaned = 0.137839 Jy ! Component: 200 - total flux cleaned = 0.143706 Jy ! Total flux subtracted in 200 components = 0.143706 Jy ! Clean residual min=-0.017471 max=0.028903 Jy/beam ! Clean residual mean=0.000070 rms=0.006375 Jy/beam ! Combined flux in latest and established models = 2.06686 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 49 components and 2.06686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362774Jy sigma=0.001793 ! Fit after self-cal, rms=0.362406Jy sigma=0.001792 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362406Jy sigma=0.001792 ! Fit after self-cal, rms=0.356633Jy sigma=0.001762 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, -40). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233854 Jy ! Component: 100 - total flux cleaned = 0.0239678 Jy ! Component: 150 - total flux cleaned = 0.025541 Jy ! Component: 200 - total flux cleaned = 0.0264176 Jy ! Total flux subtracted in 200 components = 0.0264176 Jy ! Clean residual min=-0.018895 max=0.017926 Jy/beam ! Clean residual mean=0.000037 rms=0.004954 Jy/beam ! Combined flux in latest and established models = 2.09328 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 72 components and 2.09328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354229Jy sigma=0.001750 ! Fit after self-cal, rms=0.353474Jy sigma=0.001747 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.372 x 8.418 at -4.964 degrees (North through East) ! Clean map min=-0.018331 max=1.6449 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353474Jy sigma=0.001747 ! Fit after self-cal, rms=0.343207Jy sigma=0.001707 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343207Jy sigma=0.001707 ! Fit after self-cal, rms=0.343036Jy sigma=0.001706 ! Inverting map and beam ! Estimated beam: bmin=3.373 mas, bmaj=8.399 mas, bpa=-4.816 degrees ! Estimated noise=1312.29 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446185 Jy ! Component: 100 - total flux cleaned = 0.0040737 Jy ! Component: 150 - total flux cleaned = 0.00442324 Jy ! Component: 200 - total flux cleaned = 0.00442885 Jy ! Total flux subtracted in 200 components = 0.00442885 Jy ! Clean residual min=-0.015615 max=0.016943 Jy/beam ! Clean residual mean=0.000034 rms=0.004205 Jy/beam ! Combined flux in latest and established models = 2.09771 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 98 components and 2.09771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342362Jy sigma=0.001703 ! Fit after self-cal, rms=0.342292Jy sigma=0.001703 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342292Jy sigma=0.001703 ! Fit after self-cal, rms=0.341740Jy sigma=0.001702 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341740Jy sigma=0.001702 ! Fit after self-cal, rms=0.341721Jy sigma=0.001702 ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=8.395 mas, bpa=-4.773 degrees ! Estimated noise=1310.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159017 Jy ! Component: 100 - total flux cleaned = 0.00220484 Jy ! Component: 150 - total flux cleaned = 0.00248971 Jy ! Component: 200 - total flux cleaned = 0.00250196 Jy ! Total flux subtracted in 200 components = 0.00250196 Jy ! Clean residual min=-0.013781 max=0.016008 Jy/beam ! Clean residual mean=0.000028 rms=0.003884 Jy/beam ! Combined flux in latest and established models = 2.10021 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 112 components and 2.10021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341316Jy sigma=0.001700 ! Fit after self-cal, rms=0.341303Jy sigma=0.001700 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.648 mas, bmaj=13.02 mas, bpa=-6.251 degrees ! Estimated noise=1654.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051894 Jy ! Component: 100 - total flux cleaned = 0.00483484 Jy ! Component: 150 - total flux cleaned = 0.00385682 Jy ! Component: 200 - total flux cleaned = 0.00299264 Jy ! Total flux subtracted in 200 components = 0.00299264 Jy ! Clean residual min=-0.012682 max=0.013479 Jy/beam ! Clean residual mean=0.000054 rms=0.004228 Jy/beam ! Combined flux in latest and established models = 2.1032 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 126 components and 2.1032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341387Jy sigma=0.001700 ! Fit after self-cal, rms=0.341287Jy sigma=0.001699 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.205 mas, bpa=-3.76 degrees ! Estimated noise=2238.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.39932 Jy ! Component: 100 - total flux cleaned = 1.68919 Jy ! Component: 150 - total flux cleaned = 1.80912 Jy ! Component: 200 - total flux cleaned = 1.88163 Jy ! Total flux subtracted in 200 components = 1.88163 Jy ! Clean residual min=-0.028693 max=0.059478 Jy/beam ! Clean residual mean=0.000203 rms=0.010670 Jy/beam ! Combined flux in latest and established models = 1.88163 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.88163 Jy ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=8.395 mas, bpa=-4.773 degrees ! Estimated noise=1310.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0781081 Jy ! Component: 100 - total flux cleaned = 0.121552 Jy ! Component: 150 - total flux cleaned = 0.151756 Jy ! Component: 200 - total flux cleaned = 0.17324 Jy ! Total flux subtracted in 200 components = 0.17324 Jy ! Clean residual min=-0.012742 max=0.014579 Jy/beam ! Clean residual mean=0.000116 rms=0.004021 Jy/beam ! Combined flux in latest and established models = 2.05487 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 75 components and 2.05487 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.648 mas, bmaj=13.02 mas, bpa=-6.251 degrees ! Estimated noise=1654.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174619 Jy ! Component: 100 - total flux cleaned = 0.0237415 Jy ! Component: 150 - total flux cleaned = 0.0265353 Jy ! Component: 200 - total flux cleaned = 0.0285302 Jy ! Total flux subtracted in 200 components = 0.0285302 Jy ! Clean residual min=-0.012096 max=0.012062 Jy/beam ! Clean residual mean=0.000120 rms=0.003685 Jy/beam ! Combined flux in latest and established models = 2.0834 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 120 components and 2.0834 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=8.395 mas, bpa=-4.773 degrees ! Estimated noise=1310.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000842913 Jy ! Component: 100 - total flux cleaned = 0.00239476 Jy ! Component: 150 - total flux cleaned = 0.00338967 Jy ! Component: 200 - total flux cleaned = 0.00397378 Jy ! Total flux subtracted in 200 components = 0.00397378 Jy ! Clean residual min=-0.009428 max=0.010973 Jy/beam ! Clean residual mean=0.000047 rms=0.002894 Jy/beam ! Combined flux in latest and established models = 2.08738 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 2.08738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340615Jy sigma=0.001695 ! Fit after self-cal, rms=0.340381Jy sigma=0.001695 wmodel J0501-0159_S_1996_03_13_yyk\_map.mod ! Writing 146 model components to file: J0501-0159_S_1996_03_13_yyk_map.mod wobs J0501-0159_S_1996_03_13_yyk\_uvs.fits ! Writing UV FITS file: J0501-0159_S_1996_03_13_yyk_uvs.fits wwins J0501-0159_S_1996_03_13_yyk\_map.win ! wwins: Wrote 4 windows to J0501-0159_S_1996_03_13_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385046 Jy ! Component: 100 - total flux cleaned = 0.00551341 Jy ! Component: 150 - total flux cleaned = 0.00660382 Jy ! Component: 200 - total flux cleaned = 0.00762201 Jy ! Component: 250 - total flux cleaned = 0.00843472 Jy ! Component: 300 - total flux cleaned = 0.00856343 Jy ! Component: 350 - total flux cleaned = 0.00868257 Jy ! Component: 400 - total flux cleaned = 0.00868289 Jy ! Component: 450 - total flux cleaned = 0.00868485 Jy ! Component: 500 - total flux cleaned = 0.00911286 Jy ! Component: 550 - total flux cleaned = 0.0095229 Jy ! Component: 600 - total flux cleaned = 0.0099163 Jy ! Component: 650 - total flux cleaned = 0.0101092 Jy ! Component: 700 - total flux cleaned = 0.0104751 Jy ! Component: 750 - total flux cleaned = 0.0108311 Jy ! Component: 800 - total flux cleaned = 0.0111754 Jy ! Component: 850 - total flux cleaned = 0.011425 Jy ! Component: 900 - total flux cleaned = 0.0119112 Jy ! Component: 950 - total flux cleaned = 0.0122252 Jy ! Component: 1000 - total flux cleaned = 0.0122261 Jy ! Component: 1050 - total flux cleaned = 0.0126026 Jy ! Component: 1100 - total flux cleaned = 0.0127506 Jy ! Component: 1150 - total flux cleaned = 0.0128934 Jy ! Component: 1200 - total flux cleaned = 0.0128926 Jy ! Component: 1250 - total flux cleaned = 0.0128918 Jy ! Component: 1300 - total flux cleaned = 0.0127578 Jy ! Component: 1350 - total flux cleaned = 0.0128896 Jy ! Component: 1400 - total flux cleaned = 0.0128243 Jy ! Component: 1450 - total flux cleaned = 0.013014 Jy ! Component: 1500 - total flux cleaned = 0.0131378 Jy ! Component: 1550 - total flux cleaned = 0.0133212 Jy ! Component: 1600 - total flux cleaned = 0.0133807 Jy ! Component: 1650 - total flux cleaned = 0.0133809 Jy ! Component: 1700 - total flux cleaned = 0.0134966 Jy ! Component: 1750 - total flux cleaned = 0.0134959 Jy ! Component: 1800 - total flux cleaned = 0.0136637 Jy ! Component: 1850 - total flux cleaned = 0.0137191 Jy ! Component: 1900 - total flux cleaned = 0.0139359 Jy ! Component: 1950 - total flux cleaned = 0.0140945 Jy ! Component: 2000 - total flux cleaned = 0.014199 Jy ! Total flux subtracted in 2048 components = 0.0142 Jy ! Clean residual min=-0.002847 max=0.002625 Jy/beam ! Clean residual mean=0.000005 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 2.10158 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 281 components and 2.10158 Jy ![Exited script file: muppet] wmap "J0501-0159_S_1996_03_13_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.375 x 8.395 at -4.773 degrees (North through East) ! Clean map min=-0.0066974 max=1.6545 Jy/beam ! Writing clean map to FITS file: J0501-0159_S_1996_03_13_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.65449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00102811 device "J0501-0159_S_1996_03_13_yyk\_map.eps/VPS" ! Attempting to open device: 'J0501-0159_S_1996_03_13_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.186422 0.186422 0.372844 0.745687 1.49137 2.98275 5.9655 11.931 23.862 47.724 95.4479 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.654 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.375 x 8.395 at -4.773 degrees (North through East) ! Clean map min=-0.0066974 max=1.6545 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0501-0159_S_1996_03_13_yyk\_map.gif/gif" ! Attempting to open device: 'J0501-0159_S_1996_03_13_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0501-0159_S_1996_03_13_yyk_uvs.log closed on Sun Jan 7 16:22:56 2007