! Started logfile: J0501-0159_S_1995_04_19_yyk_uvs.log on Sun Jan 7 16:22:37 2007 obs J0501-0159_S_1995_04_19_yyk_uva.fits ! Reading UV FITS file: J0501-0159_S_1995_04_19_yyk_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.746154 visibilities/baseline/integration-bin. ! Found source: J0501-0159 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 976 lines of history. ! ! Reading 3492 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0501-0159_S_1995_04_19_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.06779 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=7.004 mas, bpa=-6.007 degrees ! Estimated noise=2423.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.67787 Jy ! Component: 100 - total flux cleaned = 1.96499 Jy ! Total flux subtracted in 100 components = 1.96499 Jy ! Clean residual min=-0.059357 max=0.105811 Jy/beam ! Clean residual mean=0.004098 rms=0.021709 Jy/beam ! Combined flux in latest and established models = 1.96499 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.96499 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.404445Jy sigma=0.002668 ! Fit after self-cal, rms=0.403369Jy sigma=0.002662 ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=7.004 mas, bpa=-6.007 degrees ! Estimated noise=2423.46 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.444 mas, bmaj=9.264 mas, bpa=-2.477 degrees ! Estimated noise=1667.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.11278 Jy ! Component: 100 - total flux cleaned = 0.156455 Jy ! Component: 150 - total flux cleaned = 0.164906 Jy ! Component: 200 - total flux cleaned = 0.167707 Jy ! Total flux subtracted in 200 components = 0.167707 Jy ! Clean residual min=-0.059554 max=0.108041 Jy/beam ! Clean residual mean=0.006000 rms=0.023724 Jy/beam ! Combined flux in latest and established models = 2.1327 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 30 components and 2.1327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373241Jy sigma=0.002491 ! Fit after self-cal, rms=0.372617Jy sigma=0.002487 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.444 x 9.264 at -2.477 degrees (North through East) ! Clean map min=-0.058473 max=1.9502 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02883 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.03 KP 0.90 ! LA 0.93 MK 0.99 NL 0.95 OV 1.08 ! PT 0.92 SC 0.86 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.986232 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.14 HN 1.11 KP 0.97 ! LA 1.06 MK 1.03 NL 0.92 OV 1.04 ! PT 0.92 SC 0.91 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02888 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 0.97 KP 0.95 ! LA 0.79 MK 0.92 NL 1.02 OV 0.97 ! PT 1.08 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.988595 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.12 HN 1.11 KP 1.05 ! LA 0.85 MK 1.06 NL 1.03 OV 1.04 ! PT 0.93 SC 0.93 ! ! ! Fit before self-cal, rms=0.372617Jy sigma=0.002487 ! Fit after self-cal, rms=0.295799Jy sigma=0.001990 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295799Jy sigma=0.001990 ! Fit after self-cal, rms=0.295839Jy sigma=0.001990 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.426 mas, bmaj=9.125 mas, bpa=-0.9263 degrees ! Estimated noise=1678.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, 1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0711587 Jy ! Component: 100 - total flux cleaned = 0.103525 Jy ! Component: 150 - total flux cleaned = 0.113185 Jy ! Component: 200 - total flux cleaned = 0.115473 Jy ! Total flux subtracted in 200 components = 0.115473 Jy ! Clean residual min=-0.025527 max=0.029862 Jy/beam ! Clean residual mean=0.000009 rms=0.007682 Jy/beam ! Combined flux in latest and established models = 2.24817 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 59 components and 2.24817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282668Jy sigma=0.001889 ! Fit after self-cal, rms=0.281795Jy sigma=0.001884 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281795Jy sigma=0.001884 ! Fit after self-cal, rms=0.275580Jy sigma=0.001844 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109612 Jy ! Component: 100 - total flux cleaned = 0.0122218 Jy ! Component: 150 - total flux cleaned = 0.0122619 Jy ! Component: 200 - total flux cleaned = 0.0127595 Jy ! Total flux subtracted in 200 components = 0.0127595 Jy ! Clean residual min=-0.023738 max=0.020819 Jy/beam ! Clean residual mean=-0.000214 rms=0.006866 Jy/beam ! Combined flux in latest and established models = 2.26093 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 2.26093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273439Jy sigma=0.001830 ! Fit after self-cal, rms=0.272390Jy sigma=0.001824 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.426 x 9.125 at -0.9263 degrees (North through East) ! Clean map min=-0.023165 max=1.9757 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272390Jy sigma=0.001824 ! Fit after self-cal, rms=0.255440Jy sigma=0.001712 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255440Jy sigma=0.001712 ! Fit after self-cal, rms=0.255278Jy sigma=0.001711 ! Inverting map and beam ! Estimated beam: bmin=4.401 mas, bmaj=9.09 mas, bpa=-1.029 degrees ! Estimated noise=1670.39 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206159 Jy ! Component: 100 - total flux cleaned = 0.0211637 Jy ! Component: 150 - total flux cleaned = 0.0199795 Jy ! Component: 200 - total flux cleaned = 0.0196442 Jy ! Total flux subtracted in 200 components = 0.0196442 Jy ! Clean residual min=-0.016970 max=0.017172 Jy/beam ! Clean residual mean=-0.000195 rms=0.004980 Jy/beam ! Combined flux in latest and established models = 2.28058 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 2.28058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253588Jy sigma=0.001699 ! Fit after self-cal, rms=0.253412Jy sigma=0.001697 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253412Jy sigma=0.001697 ! Fit after self-cal, rms=0.252833Jy sigma=0.001692 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252833Jy sigma=0.001692 ! Fit after self-cal, rms=0.252827Jy sigma=0.001692 ! Inverting map and beam ! Estimated beam: bmin=4.395 mas, bmaj=9.083 mas, bpa=-1.057 degrees ! Estimated noise=1669.47 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011445 Jy ! Component: 100 - total flux cleaned = 0.0114513 Jy ! Component: 150 - total flux cleaned = 0.0114679 Jy ! Component: 200 - total flux cleaned = 0.0117077 Jy ! Total flux subtracted in 200 components = 0.0117077 Jy ! Clean residual min=-0.015078 max=0.015476 Jy/beam ! Clean residual mean=-0.000219 rms=0.004287 Jy/beam ! Combined flux in latest and established models = 2.29229 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 2.29228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252060Jy sigma=0.001687 ! Fit after self-cal, rms=0.251986Jy sigma=0.001686 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.701 mas, bmaj=14.44 mas, bpa=12.27 degrees ! Estimated noise=1907.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113072 Jy ! Component: 100 - total flux cleaned = -0.00160318 Jy ! Component: 150 - total flux cleaned = -0.0021807 Jy ! Component: 200 - total flux cleaned = -0.00252851 Jy ! Total flux subtracted in 200 components = -0.00252851 Jy ! Clean residual min=-0.017525 max=0.017059 Jy/beam ! Clean residual mean=-0.000291 rms=0.004932 Jy/beam ! Combined flux in latest and established models = 2.28976 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 2.28976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251838Jy sigma=0.001685 ! Fit after self-cal, rms=0.251773Jy sigma=0.001685 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=6.904 mas, bpa=-5.12 degrees ! Estimated noise=2412.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.67128 Jy ! Component: 100 - total flux cleaned = 1.97439 Jy ! Component: 150 - total flux cleaned = 2.09904 Jy ! Component: 200 - total flux cleaned = 2.1653 Jy ! Total flux subtracted in 200 components = 2.1653 Jy ! Clean residual min=-0.022577 max=0.028365 Jy/beam ! Clean residual mean=0.000729 rms=0.007749 Jy/beam ! Combined flux in latest and established models = 2.1653 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 2.1653 Jy ! Inverting map and beam ! Estimated beam: bmin=4.395 mas, bmaj=9.083 mas, bpa=-1.057 degrees ! Estimated noise=1669.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550463 Jy ! Component: 100 - total flux cleaned = 0.0858374 Jy ! Component: 150 - total flux cleaned = 0.105213 Jy ! Component: 200 - total flux cleaned = 0.11029 Jy ! Total flux subtracted in 200 components = 0.11029 Jy ! Clean residual min=-0.018120 max=0.012846 Jy/beam ! Clean residual mean=0.000089 rms=0.004314 Jy/beam ! Combined flux in latest and established models = 2.27559 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 69 components and 2.27559 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.701 mas, bmaj=14.44 mas, bpa=12.27 degrees ! Estimated noise=1907.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00671934 Jy ! Component: 100 - total flux cleaned = 0.00898373 Jy ! Component: 150 - total flux cleaned = 0.00951503 Jy ! Component: 200 - total flux cleaned = 0.00973069 Jy ! Total flux subtracted in 200 components = 0.00973069 Jy ! Clean residual min=-0.018399 max=0.015737 Jy/beam ! Clean residual mean=-0.000157 rms=0.004687 Jy/beam ! Combined flux in latest and established models = 2.28532 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 103 components and 2.28532 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.395 mas, bmaj=9.083 mas, bpa=-1.057 degrees ! Estimated noise=1669.47 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206485 Jy ! Component: 100 - total flux cleaned = -0.00069203 Jy ! Component: 150 - total flux cleaned = -0.000442488 Jy ! Component: 200 - total flux cleaned = -0.000218799 Jy ! Total flux subtracted in 200 components = -0.000218798 Jy ! Clean residual min=-0.014661 max=0.012735 Jy/beam ! Clean residual mean=-0.000102 rms=0.003868 Jy/beam ! Combined flux in latest and established models = 2.2851 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 2.2851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251692Jy sigma=0.001684 ! Fit after self-cal, rms=0.251615Jy sigma=0.001683 wmodel J0501-0159_S_1995_04_19_yyk\_map.mod ! Writing 120 model components to file: J0501-0159_S_1995_04_19_yyk_map.mod wobs J0501-0159_S_1995_04_19_yyk\_uvs.fits ! Writing UV FITS file: J0501-0159_S_1995_04_19_yyk_uvs.fits wwins J0501-0159_S_1995_04_19_yyk\_map.win ! wwins: Wrote 2 windows to J0501-0159_S_1995_04_19_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000974861 Jy ! Component: 100 - total flux cleaned = 0.000926805 Jy ! Component: 150 - total flux cleaned = 0.00304665 Jy ! Component: 200 - total flux cleaned = 0.00518137 Jy ! Component: 250 - total flux cleaned = 0.00568219 Jy ! Component: 300 - total flux cleaned = 0.00568899 Jy ! Component: 350 - total flux cleaned = 0.00525355 Jy ! Component: 400 - total flux cleaned = 0.00539532 Jy ! Component: 450 - total flux cleaned = 0.00578482 Jy ! Component: 500 - total flux cleaned = 0.00590592 Jy ! Component: 550 - total flux cleaned = 0.00602255 Jy ! Component: 600 - total flux cleaned = 0.00568226 Jy ! Component: 650 - total flux cleaned = 0.00557264 Jy ! Component: 700 - total flux cleaned = 0.00546742 Jy ! Component: 750 - total flux cleaned = 0.00536577 Jy ! Component: 800 - total flux cleaned = 0.00517018 Jy ! Component: 850 - total flux cleaned = 0.00479103 Jy ! Component: 900 - total flux cleaned = 0.00460905 Jy ! Component: 950 - total flux cleaned = 0.00443042 Jy ! Component: 1000 - total flux cleaned = 0.00425804 Jy ! Component: 1050 - total flux cleaned = 0.00417213 Jy ! Component: 1100 - total flux cleaned = 0.00384867 Jy ! Component: 1150 - total flux cleaned = 0.0037709 Jy ! Component: 1200 - total flux cleaned = 0.00346123 Jy ! Component: 1250 - total flux cleaned = 0.00278218 Jy ! Component: 1300 - total flux cleaned = 0.00226387 Jy ! Component: 1350 - total flux cleaned = 0.00168723 Jy ! Component: 1400 - total flux cleaned = 0.00112267 Jy ! Component: 1450 - total flux cleaned = 0.000637893 Jy ! Component: 1500 - total flux cleaned = 9.44591e-05 Jy ! Component: 1550 - total flux cleaned = -0.000505441 Jy ! Component: 1600 - total flux cleaned = -0.00102991 Jy ! Component: 1650 - total flux cleaned = -0.0015461 Jy ! Component: 1700 - total flux cleaned = -0.00173849 Jy ! Component: 1750 - total flux cleaned = -0.00242594 Jy ! Component: 1800 - total flux cleaned = -0.00297861 Jy ! Component: 1850 - total flux cleaned = -0.00358256 Jy ! Component: 1900 - total flux cleaned = -0.00429538 Jy ! Component: 1950 - total flux cleaned = -0.00476288 Jy ! Component: 2000 - total flux cleaned = -0.00539612 Jy ! Total flux subtracted in 2048 components = -0.00607798 Jy ! Clean residual min=-0.003271 max=0.003006 Jy/beam ! Clean residual mean=-0.000064 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 2.27902 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 254 components and 2.27902 Jy ![Exited script file: muppet] wmap "J0501-0159_S_1995_04_19_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.395 x 9.083 at -1.057 degrees (North through East) ! Clean map min=-0.0097422 max=1.9768 Jy/beam ! Writing clean map to FITS file: J0501-0159_S_1995_04_19_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.97676 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00124381 device "J0501-0159_S_1995_04_19_yyk\_map.eps/VPS" ! Attempting to open device: 'J0501-0159_S_1995_04_19_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.188765 0.188765 0.37753 0.75506 1.51012 3.02024 6.04048 12.081 24.1619 48.3238 96.6477 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.976 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.395 x 9.083 at -1.057 degrees (North through East) ! Clean map min=-0.0097422 max=1.9768 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0501-0159_S_1995_04_19_yyk\_map.gif/gif" ! Attempting to open device: 'J0501-0159_S_1995_04_19_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0501-0159_S_1995_04_19_yyk_uvs.log closed on Sun Jan 7 16:22:42 2007