! Started logfile: J0457-2324_S_1996_01_02_yyk_uvs.log on Sun Jan 7 16:21:26 2007 obs J0457-2324_S_1996_01_02_yyk_uva.fits ! Reading UV FITS file: J0457-2324_S_1996_01_02_yyk_uva.fits ! AN table 1: 130 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.886496 visibilities/baseline/integration-bin. ! Found source: J0457-2324 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 623 lines of history. ! ! Reading 20744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0457-2324_S_1996_01_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.37596 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=7.348 mas, bpa=-9.286 degrees ! Estimated noise=2358.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.99957 Jy ! Component: 100 - total flux cleaned = 1.17536 Jy ! Total flux subtracted in 100 components = 1.17536 Jy ! Clean residual min=-0.066567 max=0.087108 Jy/beam ! Clean residual mean=-0.000240 rms=0.022682 Jy/beam ! Combined flux in latest and established models = 1.17536 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.17536 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.557919Jy sigma=0.002127 ! Fit after self-cal, rms=0.557737Jy sigma=0.002127 ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=7.348 mas, bpa=-9.286 degrees ! Estimated noise=2358.55 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=9.025 mas, bpa=-7.392 degrees ! Estimated noise=1179.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.120669 Jy ! Component: 100 - total flux cleaned = 0.166135 Jy ! Component: 150 - total flux cleaned = 0.170926 Jy ! Component: 200 - total flux cleaned = 0.174112 Jy ! Total flux subtracted in 200 components = 0.174112 Jy ! Clean residual min=-0.048466 max=0.051290 Jy/beam ! Clean residual mean=0.000066 rms=0.012945 Jy/beam ! Combined flux in latest and established models = 1.34948 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 31 components and 1.34948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.533282Jy sigma=0.002045 ! Fit after self-cal, rms=0.533200Jy sigma=0.002044 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.455 x 9.025 at -7.392 degrees (North through East) ! Clean map min=-0.047838 max=1.1752 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02487 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 1.23 KP 0.84 ! LA 1.01 MK 0.99 NL 0.79 OV 1.02 ! PT 0.98 SC 0.85 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.980218 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.16 HN 1.33 KP 0.88 ! LA 1.11 MK 1.02 NL 0.82 OV 1.02 ! PT 0.91 SC 0.90 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01907 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.11 HN 1.18 KP 0.84 ! LA 0.86 MK 0.91 NL 0.87 OV 0.93 ! PT 1.10 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.970487 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.14 HN 1.32 KP 0.92 ! LA 0.90 MK 1.06 NL 0.97 OV 0.91 ! PT 1.11 SC 0.97 ! ! ! Fit before self-cal, rms=0.533200Jy sigma=0.002044 ! Fit after self-cal, rms=0.487121Jy sigma=0.001884 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.487121Jy sigma=0.001884 ! Fit after self-cal, rms=0.487086Jy sigma=0.001884 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=8.757 mas, bpa=-6.138 degrees ! Estimated noise=1159.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.012534 Jy ! Component: 100 - total flux cleaned = -0.0134816 Jy ! Component: 150 - total flux cleaned = -0.0143436 Jy ! Component: 200 - total flux cleaned = -0.0151361 Jy ! Total flux subtracted in 200 components = -0.0151361 Jy ! Clean residual min=-0.011765 max=0.015386 Jy/beam ! Clean residual mean=0.000084 rms=0.003315 Jy/beam ! Combined flux in latest and established models = 1.33434 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 1.33434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.486159Jy sigma=0.001881 ! Fit after self-cal, rms=0.486165Jy sigma=0.001881 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.486165Jy sigma=0.001881 ! Fit after self-cal, rms=0.452620Jy sigma=0.001722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120818 Jy ! Component: 100 - total flux cleaned = 0.0113833 Jy ! Component: 150 - total flux cleaned = 0.0100098 Jy ! Component: 200 - total flux cleaned = 0.00905022 Jy ! Total flux subtracted in 200 components = 0.00905022 Jy ! Clean residual min=-0.011930 max=0.011623 Jy/beam ! Clean residual mean=0.000144 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 1.34339 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 1.34339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451755Jy sigma=0.001719 ! Fit after self-cal, rms=0.451517Jy sigma=0.001718 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 8.757 at -6.138 degrees (North through East) ! Clean map min=-0.011366 max=1.2008 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451517Jy sigma=0.001718 ! Fit after self-cal, rms=0.445356Jy sigma=0.001696 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.445356Jy sigma=0.001696 ! Fit after self-cal, rms=0.445316Jy sigma=0.001696 ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=8.783 mas, bpa=-6.098 degrees ! Estimated noise=1155.72 mJy/beam. ! Added new window around map position (-5, -5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632294 Jy ! Component: 100 - total flux cleaned = 0.00633238 Jy ! Component: 150 - total flux cleaned = 0.00659632 Jy ! Component: 200 - total flux cleaned = 0.00659252 Jy ! Total flux subtracted in 200 components = 0.00659252 Jy ! Clean residual min=-0.008750 max=0.008691 Jy/beam ! Clean residual mean=0.000144 rms=0.002189 Jy/beam ! Combined flux in latest and established models = 1.34998 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 1.34998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444757Jy sigma=0.001694 ! Fit after self-cal, rms=0.444711Jy sigma=0.001694 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444711Jy sigma=0.001694 ! Fit after self-cal, rms=0.442202Jy sigma=0.001683 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.442202Jy sigma=0.001683 ! Fit after self-cal, rms=0.442206Jy sigma=0.001683 ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=8.764 mas, bpa=-5.921 degrees ! Estimated noise=1156.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048912 Jy ! Component: 100 - total flux cleaned = 0.00564594 Jy ! Component: 150 - total flux cleaned = 0.00564404 Jy ! Component: 200 - total flux cleaned = 0.00545211 Jy ! Total flux subtracted in 200 components = 0.00545211 Jy ! Clean residual min=-0.008164 max=0.007544 Jy/beam ! Clean residual mean=0.000106 rms=0.002044 Jy/beam ! Combined flux in latest and established models = 1.35543 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 1.35543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441928Jy sigma=0.001682 ! Fit after self-cal, rms=0.441913Jy sigma=0.001682 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.117 mas, bmaj=19.57 mas, bpa=-2.64 degrees ! Estimated noise=1422.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00062273 Jy ! Component: 100 - total flux cleaned = -0.000888767 Jy ! Component: 150 - total flux cleaned = -0.000999962 Jy ! Component: 200 - total flux cleaned = -0.00117507 Jy ! Total flux subtracted in 200 components = -0.00117507 Jy ! Clean residual min=-0.006306 max=0.006294 Jy/beam ! Clean residual mean=0.000166 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 1.35426 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 1.35426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441850Jy sigma=0.001682 ! Fit after self-cal, rms=0.441823Jy sigma=0.001682 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=7.192 mas, bpa=-8.575 degrees ! Estimated noise=2353.9 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.0369 Jy ! Component: 100 - total flux cleaned = 1.2061 Jy ! Component: 150 - total flux cleaned = 1.27376 Jy ! Component: 200 - total flux cleaned = 1.31121 Jy ! Total flux subtracted in 200 components = 1.31121 Jy ! Clean residual min=-0.013388 max=0.019278 Jy/beam ! Clean residual mean=0.000025 rms=0.004000 Jy/beam ! Combined flux in latest and established models = 1.31121 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.31121 Jy ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=8.764 mas, bpa=-5.921 degrees ! Estimated noise=1156.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247666 Jy ! Component: 100 - total flux cleaned = 0.0369807 Jy ! Component: 150 - total flux cleaned = 0.0403788 Jy ! Component: 200 - total flux cleaned = 0.0412958 Jy ! Total flux subtracted in 200 components = 0.0412958 Jy ! Clean residual min=-0.006393 max=0.007084 Jy/beam ! Clean residual mean=0.000086 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 1.35251 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 50 components and 1.35251 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.117 mas, bmaj=19.57 mas, bpa=-2.64 degrees ! Estimated noise=1422.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000882603 Jy ! Component: 100 - total flux cleaned = 0.000760128 Jy ! Component: 150 - total flux cleaned = 0.000660834 Jy ! Component: 200 - total flux cleaned = 0.000655676 Jy ! Total flux subtracted in 200 components = 0.000655676 Jy ! Clean residual min=-0.005817 max=0.006253 Jy/beam ! Clean residual mean=0.000156 rms=0.001993 Jy/beam ! Combined flux in latest and established models = 1.35316 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 1.35316 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=8.764 mas, bpa=-5.921 degrees ! Estimated noise=1156.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000520175 Jy ! Component: 100 - total flux cleaned = -0.00035801 Jy ! Component: 150 - total flux cleaned = -0.000212275 Jy ! Component: 200 - total flux cleaned = -0.000216671 Jy ! Total flux subtracted in 200 components = -0.000216671 Jy ! Clean residual min=-0.006167 max=0.006847 Jy/beam ! Clean residual mean=0.000093 rms=0.001838 Jy/beam ! Combined flux in latest and established models = 1.35294 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 1.35294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441591Jy sigma=0.001681 ! Fit after self-cal, rms=0.441557Jy sigma=0.001681 wmodel J0457-2324_S_1996_01_02_yyk\_map.mod ! Writing 71 model components to file: J0457-2324_S_1996_01_02_yyk_map.mod wobs J0457-2324_S_1996_01_02_yyk\_uvs.fits ! Writing UV FITS file: J0457-2324_S_1996_01_02_yyk_uvs.fits wwins J0457-2324_S_1996_01_02_yyk\_map.win ! wwins: Wrote 2 windows to J0457-2324_S_1996_01_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000976872 Jy ! Component: 100 - total flux cleaned = 0.0012963 Jy ! Component: 150 - total flux cleaned = 0.00200801 Jy ! Component: 200 - total flux cleaned = 0.00230116 Jy ! Component: 250 - total flux cleaned = 0.0025829 Jy ! Component: 300 - total flux cleaned = 0.00276459 Jy ! Component: 350 - total flux cleaned = 0.00267831 Jy ! Component: 400 - total flux cleaned = 0.00294116 Jy ! Component: 450 - total flux cleaned = 0.00294199 Jy ! Component: 500 - total flux cleaned = 0.0026947 Jy ! Component: 550 - total flux cleaned = 0.00245324 Jy ! Component: 600 - total flux cleaned = 0.00229481 Jy ! Component: 650 - total flux cleaned = 0.00206211 Jy ! Component: 700 - total flux cleaned = 0.00206225 Jy ! Component: 750 - total flux cleaned = 0.00176068 Jy ! Component: 800 - total flux cleaned = 0.00153702 Jy ! Component: 850 - total flux cleaned = 0.00139231 Jy ! Component: 900 - total flux cleaned = 0.00139117 Jy ! Component: 950 - total flux cleaned = 0.00132051 Jy ! Component: 1000 - total flux cleaned = 0.0013907 Jy ! Component: 1050 - total flux cleaned = 0.00159508 Jy ! Component: 1100 - total flux cleaned = 0.00145947 Jy ! Component: 1150 - total flux cleaned = 0.0014596 Jy ! Component: 1200 - total flux cleaned = 0.00145987 Jy ! Component: 1250 - total flux cleaned = 0.00152363 Jy ! Component: 1300 - total flux cleaned = 0.00139482 Jy ! Component: 1350 - total flux cleaned = 0.00139459 Jy ! Component: 1400 - total flux cleaned = 0.00133356 Jy ! Component: 1450 - total flux cleaned = 0.00133383 Jy ! Component: 1500 - total flux cleaned = 0.00133446 Jy ! Component: 1550 - total flux cleaned = 0.0014543 Jy ! Component: 1600 - total flux cleaned = 0.00139582 Jy ! Component: 1650 - total flux cleaned = 0.00157097 Jy ! Component: 1700 - total flux cleaned = 0.00174398 Jy ! Component: 1750 - total flux cleaned = 0.00185852 Jy ! Component: 1800 - total flux cleaned = 0.00219667 Jy ! Component: 1850 - total flux cleaned = 0.00230813 Jy ! Component: 1900 - total flux cleaned = 0.00247317 Jy ! Component: 1950 - total flux cleaned = 0.00258274 Jy ! Component: 2000 - total flux cleaned = 0.0027982 Jy ! Total flux subtracted in 2048 components = 0.00295776 Jy ! Clean residual min=-0.003140 max=0.002824 Jy/beam ! Clean residual mean=0.000048 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 1.3559 Jy keep ! Adding 106 model components to the UV plane model. ! The established model now contains 176 components and 1.3559 Jy ![Exited script file: muppet] wmap "J0457-2324_S_1996_01_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 8.764 at -5.921 degrees (North through East) ! Clean map min=-0.0051116 max=1.2144 Jy/beam ! Writing clean map to FITS file: J0457-2324_S_1996_01_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.21436 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00104444 device "J0457-2324_S_1996_01_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0457-2324_S_1996_01_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.258022 0.258022 0.516045 1.03209 2.06418 4.12836 8.25672 16.5134 33.0269 66.0537 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.214 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 8.764 at -5.921 degrees (North through East) ! Clean map min=-0.0051116 max=1.2144 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0457-2324_S_1996_01_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0457-2324_S_1996_01_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0457-2324_S_1996_01_02_yyk_uvs.log closed on Sun Jan 7 16:21:33 2007