! Started logfile: J0457-2324_S_1995_07_15_yyk_uvs.log on Sun Jan 7 16:21:20 2007 obs J0457-2324_S_1995_07_15_yyk_uva.fits ! Reading UV FITS file: J0457-2324_S_1995_07_15_yyk_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.843243 visibilities/baseline/integration-bin. ! Found source: J0457-2324 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 794 lines of history. ! ! Reading 11232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0457-2324_S_1995_07_15_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.47881 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=7.257 mas, bpa=3.445 degrees ! Estimated noise=3148.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.15077 Jy ! Component: 100 - total flux cleaned = 1.35945 Jy ! Total flux subtracted in 100 components = 1.35945 Jy ! Clean residual min=-0.064664 max=0.106038 Jy/beam ! Clean residual mean=0.001034 rms=0.023098 Jy/beam ! Combined flux in latest and established models = 1.35945 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.35945 Jy ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.592311Jy sigma=0.002026 ! Fit after self-cal, rms=0.590869Jy sigma=0.002025 ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=7.257 mas, bpa=3.445 degrees ! Estimated noise=3149.33 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=9.03 mas, bpa=-0.8015 degrees ! Estimated noise=1696.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.088911 Jy ! Component: 100 - total flux cleaned = 0.116335 Jy ! Component: 150 - total flux cleaned = 0.120089 Jy ! Component: 200 - total flux cleaned = 0.121202 Jy ! Total flux subtracted in 200 components = 0.121202 Jy ! Clean residual min=-0.047535 max=0.068812 Jy/beam ! Clean residual mean=0.000440 rms=0.015742 Jy/beam ! Combined flux in latest and established models = 1.48065 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 1.48065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.580537Jy sigma=0.001980 ! Fit after self-cal, rms=0.580526Jy sigma=0.001980 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 9.03 at -0.8015 degrees (North through East) ! Clean map min=-0.046162 max=1.3245 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.97916 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.50 KP 0.89 ! LA 0.97 MK 1.00 NL 0.89 OV 1.13 ! PT 0.98 SC 0.90 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.956103 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.10 HN 1.56 KP 0.88 ! LA 1.05 MK 1.04 NL 0.90 OV 1.03 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00286 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.05 HN 1.29 KP 0.93 ! LA 0.89 MK 0.91 NL 0.98 OV 0.94 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.971147 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.12 HN 1.46 KP 0.96 ! LA 0.93 MK 1.04 NL 1.01 OV 0.95 ! PT 0.90 SC 0.99 ! ! ! Fit before self-cal, rms=0.580526Jy sigma=0.001980 ! Fit after self-cal, rms=0.576382Jy sigma=0.001868 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.576382Jy sigma=0.001868 ! Fit after self-cal, rms=0.576385Jy sigma=0.001868 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=8.837 mas, bpa=-0.2915 degrees ! Estimated noise=1603.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0589417 Jy ! Component: 100 - total flux cleaned = -0.0752518 Jy ! Component: 150 - total flux cleaned = -0.0792285 Jy ! Component: 200 - total flux cleaned = -0.08022 Jy ! Total flux subtracted in 200 components = -0.08022 Jy ! Clean residual min=-0.012977 max=0.012346 Jy/beam ! Clean residual mean=0.000381 rms=0.003242 Jy/beam ! Combined flux in latest and established models = 1.40043 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 1.40043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572743Jy sigma=0.001846 ! Fit after self-cal, rms=0.572730Jy sigma=0.001846 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572730Jy sigma=0.001846 ! Fit after self-cal, rms=0.550962Jy sigma=0.001782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438384 Jy ! Component: 100 - total flux cleaned = 0.00394014 Jy ! Component: 150 - total flux cleaned = 0.00350826 Jy ! Component: 200 - total flux cleaned = 0.00293266 Jy ! Total flux subtracted in 200 components = 0.00293266 Jy ! Clean residual min=-0.011999 max=0.011379 Jy/beam ! Clean residual mean=0.000311 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 1.40337 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 1.40337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.550651Jy sigma=0.001781 ! Fit after self-cal, rms=0.546517Jy sigma=0.001771 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 8.837 at -0.2915 degrees (North through East) ! Clean map min=-0.011158 max=1.2841 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.546517Jy sigma=0.001771 ! Fit after self-cal, rms=0.536778Jy sigma=0.001761 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536778Jy sigma=0.001761 ! Fit after self-cal, rms=0.535807Jy sigma=0.001759 ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=8.835 mas, bpa=-0.347 degrees ! Estimated noise=1600.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00227331 Jy ! Component: 100 - total flux cleaned = -0.00296176 Jy ! Component: 150 - total flux cleaned = -0.00336631 Jy ! Component: 200 - total flux cleaned = -0.00372981 Jy ! Total flux subtracted in 200 components = -0.00372981 Jy ! Clean residual min=-0.010627 max=0.012204 Jy/beam ! Clean residual mean=0.000345 rms=0.002883 Jy/beam ! Combined flux in latest and established models = 1.39964 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 1.39964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.535548Jy sigma=0.001758 ! Fit after self-cal, rms=0.535302Jy sigma=0.001757 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.535302Jy sigma=0.001757 ! Fit after self-cal, rms=0.534582Jy sigma=0.001756 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534582Jy sigma=0.001756 ! Fit after self-cal, rms=0.534539Jy sigma=0.001755 ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.826 mas, bpa=-0.3909 degrees ! Estimated noise=1599.05 mJy/beam. ! Added new window around map position (29, 6.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00834965 Jy ! Component: 100 - total flux cleaned = 0.00948969 Jy ! Component: 150 - total flux cleaned = 0.00994755 Jy ! Component: 200 - total flux cleaned = 0.00995426 Jy ! Total flux subtracted in 200 components = 0.00995426 Jy ! Clean residual min=-0.009994 max=0.009898 Jy/beam ! Clean residual mean=0.000227 rms=0.002482 Jy/beam ! Combined flux in latest and established models = 1.40959 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 1.40959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534069Jy sigma=0.001754 ! Fit after self-cal, rms=0.534056Jy sigma=0.001754 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.443 mas, bmaj=21.17 mas, bpa=11.79 degrees ! Estimated noise=1983.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194511 Jy ! Component: 100 - total flux cleaned = 0.002088 Jy ! Component: 150 - total flux cleaned = 0.00209694 Jy ! Component: 200 - total flux cleaned = 0.00200567 Jy ! Total flux subtracted in 200 components = 0.00200567 Jy ! Clean residual min=-0.006957 max=0.010339 Jy/beam ! Clean residual mean=0.000389 rms=0.002651 Jy/beam ! Combined flux in latest and established models = 1.4116 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 80 components and 1.4116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534094Jy sigma=0.001754 ! Fit after self-cal, rms=0.534082Jy sigma=0.001754 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=7.106 mas, bpa=4.192 degrees ! Estimated noise=3007.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.10554 Jy ! Component: 100 - total flux cleaned = 1.29644 Jy ! Component: 150 - total flux cleaned = 1.3437 Jy ! Component: 200 - total flux cleaned = 1.36632 Jy ! Total flux subtracted in 200 components = 1.36632 Jy ! Clean residual min=-0.025048 max=0.025053 Jy/beam ! Clean residual mean=0.000364 rms=0.007697 Jy/beam ! Combined flux in latest and established models = 1.36632 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 1.36632 Jy ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.826 mas, bpa=-0.3909 degrees ! Estimated noise=1599.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306363 Jy ! Component: 100 - total flux cleaned = 0.0452078 Jy ! Component: 150 - total flux cleaned = 0.0515848 Jy ! Component: 200 - total flux cleaned = 0.0528545 Jy ! Total flux subtracted in 200 components = 0.0528545 Jy ! Clean residual min=-0.008615 max=0.009061 Jy/beam ! Clean residual mean=0.000151 rms=0.002471 Jy/beam ! Combined flux in latest and established models = 1.41917 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 1.41917 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.443 mas, bmaj=21.17 mas, bpa=11.79 degrees ! Estimated noise=1983.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015943 Jy ! Component: 100 - total flux cleaned = 0.00245343 Jy ! Component: 150 - total flux cleaned = 0.00246306 Jy ! Component: 200 - total flux cleaned = 0.00223719 Jy ! Total flux subtracted in 200 components = 0.00223719 Jy ! Clean residual min=-0.007426 max=0.008562 Jy/beam ! Clean residual mean=0.000233 rms=0.002343 Jy/beam ! Combined flux in latest and established models = 1.42141 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 1.42141 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.826 mas, bpa=-0.3909 degrees ! Estimated noise=1599.05 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000495309 Jy ! Component: 100 - total flux cleaned = 0.000508727 Jy ! Component: 150 - total flux cleaned = 0.000517226 Jy ! Component: 200 - total flux cleaned = 0.00032748 Jy ! Total flux subtracted in 200 components = 0.00032748 Jy ! Clean residual min=-0.008426 max=0.009572 Jy/beam ! Clean residual mean=0.000128 rms=0.002217 Jy/beam ! Combined flux in latest and established models = 1.42174 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 1.42174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534026Jy sigma=0.001753 ! Fit after self-cal, rms=0.533983Jy sigma=0.001753 wmodel J0457-2324_S_1995_07_15_yyk\_map.mod ! Writing 105 model components to file: J0457-2324_S_1995_07_15_yyk_map.mod wobs J0457-2324_S_1995_07_15_yyk\_uvs.fits ! Writing UV FITS file: J0457-2324_S_1995_07_15_yyk_uvs.fits wwins J0457-2324_S_1995_07_15_yyk\_map.win ! wwins: Wrote 3 windows to J0457-2324_S_1995_07_15_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051433 Jy ! Component: 100 - total flux cleaned = -0.000996956 Jy ! Component: 150 - total flux cleaned = -0.00112831 Jy ! Component: 200 - total flux cleaned = -0.00101257 Jy ! Component: 250 - total flux cleaned = -0.00112181 Jy ! Component: 300 - total flux cleaned = -0.00165134 Jy ! Component: 350 - total flux cleaned = -0.00154868 Jy ! Component: 400 - total flux cleaned = -0.00154945 Jy ! Component: 450 - total flux cleaned = -0.00145852 Jy ! Component: 500 - total flux cleaned = -0.00101149 Jy ! Component: 550 - total flux cleaned = -0.000577421 Jy ! Component: 600 - total flux cleaned = -0.000410134 Jy ! Component: 650 - total flux cleaned = -0.000412706 Jy ! Component: 700 - total flux cleaned = -0.00017509 Jy ! Component: 750 - total flux cleaned = -0.000176933 Jy ! Component: 800 - total flux cleaned = -0.000175171 Jy ! Component: 850 - total flux cleaned = 0.00012456 Jy ! Component: 900 - total flux cleaned = 0.000196281 Jy ! Component: 950 - total flux cleaned = 0.000480967 Jy ! Component: 1000 - total flux cleaned = 0.00068929 Jy ! Component: 1050 - total flux cleaned = 0.000894555 Jy ! Component: 1100 - total flux cleaned = 0.00109641 Jy ! Component: 1150 - total flux cleaned = 0.00149294 Jy ! Component: 1200 - total flux cleaned = 0.00162396 Jy ! Component: 1250 - total flux cleaned = 0.00181522 Jy ! Component: 1300 - total flux cleaned = 0.00187742 Jy ! Component: 1350 - total flux cleaned = 0.00181583 Jy ! Component: 1400 - total flux cleaned = 0.00199999 Jy ! Component: 1450 - total flux cleaned = 0.00218045 Jy ! Component: 1500 - total flux cleaned = 0.00223973 Jy ! Component: 1550 - total flux cleaned = 0.00235664 Jy ! Component: 1600 - total flux cleaned = 0.00241336 Jy ! Component: 1650 - total flux cleaned = 0.0021841 Jy ! Component: 1700 - total flux cleaned = 0.00235316 Jy ! Component: 1750 - total flux cleaned = 0.00229778 Jy ! Component: 1800 - total flux cleaned = 0.00229795 Jy ! Component: 1850 - total flux cleaned = 0.00229801 Jy ! Component: 1900 - total flux cleaned = 0.00224519 Jy ! Component: 1950 - total flux cleaned = 0.00219286 Jy ! Component: 2000 - total flux cleaned = 0.00229723 Jy ! Total flux subtracted in 2048 components = 0.0021425 Jy ! Clean residual min=-0.003474 max=0.002911 Jy/beam ! Clean residual mean=0.000101 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 1.42388 Jy keep ! Adding 108 model components to the UV plane model. ! The established model now contains 213 components and 1.42388 Jy ![Exited script file: muppet] wmap "J0457-2324_S_1995_07_15_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.326 x 8.826 at -0.3909 degrees (North through East) ! Clean map min=-0.0067517 max=1.2845 Jy/beam ! Writing clean map to FITS file: J0457-2324_S_1995_07_15_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.28452 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000986993 device "J0457-2324_S_1995_07_15_yyk\_map.eps/VPS" ! Attempting to open device: 'J0457-2324_S_1995_07_15_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.230513 0.230513 0.461026 0.922052 1.8441 3.68821 7.37642 14.7528 29.5057 59.0114 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.284 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.326 x 8.826 at -0.3909 degrees (North through East) ! Clean map min=-0.0067517 max=1.2845 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0457-2324_S_1995_07_15_yyk\_map.gif/gif" ! Attempting to open device: 'J0457-2324_S_1995_07_15_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0457-2324_S_1995_07_15_yyk_uvs.log closed on Sun Jan 7 16:21:26 2007