! Started logfile: J0457-2324_S_1994_08_12_yyk_uvs.log on Sun Jan 7 16:21:08 2007 obs J0457-2324_S_1994_08_12_yyk_uva.fits ! Reading UV FITS file: J0457-2324_S_1994_08_12_yyk_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782079 visibilities/baseline/integration-bin. ! Found source: J0457-2324 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 783 lines of history. ! ! Reading 8728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0457-2324_S_1994_08_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.86014 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=6.578 mas, bpa=-5.975 degrees ! Estimated noise=2413.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.39615 Jy ! Component: 100 - total flux cleaned = 1.69992 Jy ! Total flux subtracted in 100 components = 1.69992 Jy ! Clean residual min=-0.116467 max=0.155102 Jy/beam ! Clean residual mean=0.000304 rms=0.033436 Jy/beam ! Combined flux in latest and established models = 1.69992 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.69992 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.568855Jy sigma=0.002996 ! Fit after self-cal, rms=0.502706Jy sigma=0.002718 ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=6.578 mas, bpa=-5.975 degrees ! Estimated noise=2418.88 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.58 mas, bmaj=9.167 mas, bpa=-4.319 degrees ! Estimated noise=1255.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.177209 Jy ! Component: 100 - total flux cleaned = 0.193147 Jy ! Component: 150 - total flux cleaned = 0.193247 Jy ! Component: 200 - total flux cleaned = 0.193285 Jy ! Total flux subtracted in 200 components = 0.193285 Jy ! Clean residual min=-0.046952 max=0.057019 Jy/beam ! Clean residual mean=0.000474 rms=0.015531 Jy/beam ! Combined flux in latest and established models = 1.89321 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 1.8932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441992Jy sigma=0.002404 ! Fit after self-cal, rms=0.441923Jy sigma=0.002404 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.58 x 9.167 at -4.319 degrees (North through East) ! Clean map min=-0.045235 max=1.7594 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03631 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.14 KP 0.90 ! LA 0.96 MK 0.98 NL 0.91 OV 0.98 ! PT 0.95 SC 0.87 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01449 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.10 HN 1.13 KP 0.92 ! LA 1.03 MK 1.02 NL 0.86 OV 0.97 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01409 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.15 KP 0.94 ! LA 0.84 MK 0.89 NL 0.95 OV 1.05 ! PT 1.10 SC 0.98 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.96891 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.10 HN 1.21 KP 0.99 ! LA 0.88 MK 1.02 NL 0.93 OV 1.31 ! PT 0.95 SC 0.93 ! ! ! Fit before self-cal, rms=0.441923Jy sigma=0.002404 ! Fit after self-cal, rms=0.377006Jy sigma=0.001990 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377006Jy sigma=0.001990 ! Fit after self-cal, rms=0.376551Jy sigma=0.001988 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=8.917 mas, bpa=-3.217 degrees ! Estimated noise=1256.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-36.5, 63.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260029 Jy ! Component: 100 - total flux cleaned = 0.030785 Jy ! Component: 150 - total flux cleaned = 0.0319679 Jy ! Component: 200 - total flux cleaned = 0.0329057 Jy ! Total flux subtracted in 200 components = 0.0329057 Jy ! Clean residual min=-0.019931 max=0.021164 Jy/beam ! Clean residual mean=-0.000056 rms=0.005145 Jy/beam ! Combined flux in latest and established models = 1.92611 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 1.92611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372733Jy sigma=0.001967 ! Fit after self-cal, rms=0.372544Jy sigma=0.001966 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372544Jy sigma=0.001966 ! Fit after self-cal, rms=0.359619Jy sigma=0.001891 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00963997 Jy ! Component: 100 - total flux cleaned = 0.0117098 Jy ! Component: 150 - total flux cleaned = 0.0111542 Jy ! Component: 200 - total flux cleaned = 0.0102018 Jy ! Total flux subtracted in 200 components = 0.0102018 Jy ! Clean residual min=-0.019992 max=0.018685 Jy/beam ! Clean residual mean=-0.000079 rms=0.004709 Jy/beam ! Combined flux in latest and established models = 1.93631 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 1.93631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355618Jy sigma=0.001878 ! Fit after self-cal, rms=0.353757Jy sigma=0.001867 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.568 x 8.917 at -3.217 degrees (North through East) ! Clean map min=-0.023413 max=1.7706 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353757Jy sigma=0.001867 ! Fit after self-cal, rms=0.354545Jy sigma=0.001729 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354545Jy sigma=0.001729 ! Fit after self-cal, rms=0.354680Jy sigma=0.001727 ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=8.927 mas, bpa=-3.191 degrees ! Estimated noise=1251.66 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102439 Jy ! Component: 100 - total flux cleaned = 0.0126251 Jy ! Component: 150 - total flux cleaned = 0.0130447 Jy ! Component: 200 - total flux cleaned = 0.013391 Jy ! Total flux subtracted in 200 components = 0.013391 Jy ! Clean residual min=-0.008688 max=0.009302 Jy/beam ! Clean residual mean=0.000000 rms=0.002460 Jy/beam ! Combined flux in latest and established models = 1.9497 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 1.9497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353496Jy sigma=0.001720 ! Fit after self-cal, rms=0.353012Jy sigma=0.001719 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353012Jy sigma=0.001719 ! Fit after self-cal, rms=0.350101Jy sigma=0.001712 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350101Jy sigma=0.001712 ! Fit after self-cal, rms=0.349889Jy sigma=0.001712 ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=8.914 mas, bpa=-3.117 degrees ! Estimated noise=1253.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672498 Jy ! Component: 100 - total flux cleaned = 0.00737445 Jy ! Component: 150 - total flux cleaned = 0.00737846 Jy ! Component: 200 - total flux cleaned = 0.00712699 Jy ! Total flux subtracted in 200 components = 0.00712699 Jy ! Clean residual min=-0.008440 max=0.008658 Jy/beam ! Clean residual mean=0.000024 rms=0.002191 Jy/beam ! Combined flux in latest and established models = 1.95683 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 1.95683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349298Jy sigma=0.001709 ! Fit after self-cal, rms=0.349007Jy sigma=0.001709 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.465 mas, bmaj=19.25 mas, bpa=4.672 degrees ! Estimated noise=1523.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381903 Jy ! Component: 100 - total flux cleaned = -0.000509235 Jy ! Component: 150 - total flux cleaned = -0.000386677 Jy ! Component: 200 - total flux cleaned = -0.000492614 Jy ! Total flux subtracted in 200 components = -0.000492614 Jy ! Clean residual min=-0.007209 max=0.006246 Jy/beam ! Clean residual mean=0.000055 rms=0.002400 Jy/beam ! Combined flux in latest and established models = 1.95634 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 1.95634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348896Jy sigma=0.001708 ! Fit after self-cal, rms=0.348660Jy sigma=0.001708 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=6.88 mas, bpa=-2.952 degrees ! Estimated noise=2640.67 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.50786 Jy ! Component: 100 - total flux cleaned = 1.81284 Jy ! Component: 150 - total flux cleaned = 1.90019 Jy ! Component: 200 - total flux cleaned = 1.93634 Jy ! Total flux subtracted in 200 components = 1.93634 Jy ! Clean residual min=-0.020439 max=0.017917 Jy/beam ! Clean residual mean=-0.000057 rms=0.005031 Jy/beam ! Combined flux in latest and established models = 1.93634 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.93634 Jy ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=8.914 mas, bpa=-3.117 degrees ! Estimated noise=1253.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170174 Jy ! Component: 100 - total flux cleaned = 0.0185134 Jy ! Component: 150 - total flux cleaned = 0.0185037 Jy ! Component: 200 - total flux cleaned = 0.0188784 Jy ! Total flux subtracted in 200 components = 0.0188784 Jy ! Clean residual min=-0.009526 max=0.008646 Jy/beam ! Clean residual mean=0.000029 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 1.95522 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 1.95522 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.465 mas, bmaj=19.25 mas, bpa=4.672 degrees ! Estimated noise=1523.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299139 Jy ! Component: 100 - total flux cleaned = 0.00280063 Jy ! Component: 150 - total flux cleaned = 0.0024413 Jy ! Component: 200 - total flux cleaned = 0.00208754 Jy ! Total flux subtracted in 200 components = 0.00208754 Jy ! Clean residual min=-0.008013 max=0.007009 Jy/beam ! Clean residual mean=0.000059 rms=0.002634 Jy/beam ! Combined flux in latest and established models = 1.95731 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 1.95731 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=8.914 mas, bpa=-3.117 degrees ! Estimated noise=1253.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117809 Jy ! Component: 100 - total flux cleaned = -0.00117072 Jy ! Component: 150 - total flux cleaned = -0.00116622 Jy ! Component: 200 - total flux cleaned = -0.00117149 Jy ! Total flux subtracted in 200 components = -0.00117149 Jy ! Clean residual min=-0.008719 max=0.008003 Jy/beam ! Clean residual mean=0.000030 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 1.95613 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 77 components and 1.95613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349258Jy sigma=0.001710 ! Fit after self-cal, rms=0.348721Jy sigma=0.001710 wmodel J0457-2324_S_1994_08_12_yyk\_map.mod ! Writing 77 model components to file: J0457-2324_S_1994_08_12_yyk_map.mod wobs J0457-2324_S_1994_08_12_yyk\_uvs.fits ! Writing UV FITS file: J0457-2324_S_1994_08_12_yyk_uvs.fits wwins J0457-2324_S_1994_08_12_yyk\_map.win ! wwins: Wrote 3 windows to J0457-2324_S_1994_08_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00240324 Jy ! Component: 100 - total flux cleaned = -0.00383698 Jy ! Component: 150 - total flux cleaned = -0.00357393 Jy ! Component: 200 - total flux cleaned = -0.0034476 Jy ! Component: 250 - total flux cleaned = -0.00296988 Jy ! Component: 300 - total flux cleaned = -0.00227165 Jy ! Component: 350 - total flux cleaned = -0.00125332 Jy ! Component: 400 - total flux cleaned = -0.000815658 Jy ! Component: 450 - total flux cleaned = -0.000817582 Jy ! Component: 500 - total flux cleaned = -0.000922808 Jy ! Component: 550 - total flux cleaned = -0.000921063 Jy ! Component: 600 - total flux cleaned = -0.00102049 Jy ! Component: 650 - total flux cleaned = -0.00121866 Jy ! Component: 700 - total flux cleaned = -0.00122021 Jy ! Component: 750 - total flux cleaned = -0.0014106 Jy ! Component: 800 - total flux cleaned = -0.00141091 Jy ! Component: 850 - total flux cleaned = -0.00159515 Jy ! Component: 900 - total flux cleaned = -0.00150291 Jy ! Component: 950 - total flux cleaned = -0.00132233 Jy ! Component: 1000 - total flux cleaned = -0.000884171 Jy ! Component: 1050 - total flux cleaned = -0.000886228 Jy ! Component: 1100 - total flux cleaned = -0.000631476 Jy ! Component: 1150 - total flux cleaned = -0.00046502 Jy ! Component: 1200 - total flux cleaned = -0.000218115 Jy ! Component: 1250 - total flux cleaned = -0.000464314 Jy ! Component: 1300 - total flux cleaned = -0.000223854 Jy ! Component: 1350 - total flux cleaned = -0.000385296 Jy ! Component: 1400 - total flux cleaned = -7.2667e-05 Jy ! Component: 1450 - total flux cleaned = -0.000150989 Jy ! Component: 1500 - total flux cleaned = 0.000153985 Jy ! Component: 1550 - total flux cleaned = 0.000153535 Jy ! Component: 1600 - total flux cleaned = 0.000376114 Jy ! Component: 1650 - total flux cleaned = 0.000301349 Jy ! Component: 1700 - total flux cleaned = 0.000446696 Jy ! Component: 1750 - total flux cleaned = 0.000519548 Jy ! Component: 1800 - total flux cleaned = 0.000803747 Jy ! Component: 1850 - total flux cleaned = 0.000874022 Jy ! Component: 1900 - total flux cleaned = 0.00108251 Jy ! Component: 1950 - total flux cleaned = 0.001152 Jy ! Component: 2000 - total flux cleaned = 0.00162913 Jy ! Total flux subtracted in 2048 components = 0.00183188 Jy ! Clean residual min=-0.003920 max=0.004058 Jy/beam ! Clean residual mean=-0.000024 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 1.95797 Jy keep ! Adding 115 model components to the UV plane model. ! The established model now contains 192 components and 1.95797 Jy ![Exited script file: muppet] wmap "J0457-2324_S_1994_08_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.552 x 8.914 at -3.117 degrees (North through East) ! Clean map min=-0.0077682 max=1.7667 Jy/beam ! Writing clean map to FITS file: J0457-2324_S_1994_08_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.76672 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00133516 device "J0457-2324_S_1994_08_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0457-2324_S_1994_08_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.226719 0.226719 0.453437 0.906874 1.81375 3.6275 7.25499 14.51 29.02 58.0399 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.766 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.552 x 8.914 at -3.117 degrees (North through East) ! Clean map min=-0.0077682 max=1.7667 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0457-2324_S_1994_08_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0457-2324_S_1994_08_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0457-2324_S_1994_08_12_yyk_uvs.log closed on Sun Jan 7 16:21:14 2007