! Started logfile: J0438-2012_S_1997_08_27_yyk_uvs.log on Sun Jan 7 16:18:34 2007 obs J0438-2012_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J0438-2012_S_1997_08_27_yyk_uva.fits ! AN table 1: 149 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955257 visibilities/baseline/integration-bin. ! Found source: J0438-2012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 25620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0438-2012_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.431482 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.749 mas, bmaj=6.557 mas, bpa=-13.19 degrees ! Estimated noise=2376.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 1). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.124691 Jy ! Component: 100 - total flux cleaned = 0.179435 Jy ! Total flux subtracted in 100 components = 0.179435 Jy ! Clean residual min=-0.018373 max=0.029872 Jy/beam ! Clean residual mean=0.000320 rms=0.005756 Jy/beam ! Combined flux in latest and established models = 0.179435 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.179435 Jy ! ! Correcting IF 1. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.397607Jy sigma=0.001313 ! Fit after self-cal, rms=0.396749Jy sigma=0.001310 ! Inverting map and beam ! Estimated beam: bmin=2.749 mas, bmaj=6.557 mas, bpa=-13.19 degrees ! Estimated noise=2376.33 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=8.139 mas, bpa=-13.71 degrees ! Estimated noise=1207.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555929 Jy ! Component: 100 - total flux cleaned = 0.0835432 Jy ! Component: 150 - total flux cleaned = 0.0997874 Jy ! Component: 200 - total flux cleaned = 0.107422 Jy ! Total flux subtracted in 200 components = 0.107422 Jy ! Clean residual min=-0.009497 max=0.014091 Jy/beam ! Clean residual mean=0.000199 rms=0.003296 Jy/beam ! Combined flux in latest and established models = 0.286857 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 66 model components to the UV plane model. ! The established model now contains 97 components and 0.286857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391544Jy sigma=0.001286 ! Fit after self-cal, rms=0.391295Jy sigma=0.001285 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.449 x 8.139 at -13.71 degrees (North through East) ! Clean map min=-0.0084155 max=0.13374 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.391295Jy sigma=0.001285 ! Fit after self-cal, rms=0.391289Jy sigma=0.001285 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391289Jy sigma=0.001285 ! Fit after self-cal, rms=0.391288Jy sigma=0.001285 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=8.14 mas, bpa=-13.71 degrees ! Estimated noise=1207.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104162 Jy ! Component: 100 - total flux cleaned = 0.0131835 Jy ! Component: 150 - total flux cleaned = 0.0154028 Jy ! Component: 200 - total flux cleaned = 0.0166826 Jy ! Total flux subtracted in 200 components = 0.0166826 Jy ! Clean residual min=-0.008387 max=0.009611 Jy/beam ! Clean residual mean=0.000170 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 0.303539 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 133 components and 0.303539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.390987Jy sigma=0.001283 ! Fit after self-cal, rms=0.390937Jy sigma=0.001283 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.390937Jy sigma=0.001283 ! Fit after self-cal, rms=0.389708Jy sigma=0.001279 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500016 Jy ! Component: 100 - total flux cleaned = 0.00568774 Jy ! Component: 150 - total flux cleaned = 0.00597255 Jy ! Component: 200 - total flux cleaned = 0.00622696 Jy ! Total flux subtracted in 200 components = 0.00622696 Jy ! Clean residual min=-0.007846 max=0.009100 Jy/beam ! Clean residual mean=0.000161 rms=0.002611 Jy/beam ! Combined flux in latest and established models = 0.309766 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 151 components and 0.309766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389609Jy sigma=0.001278 ! Fit after self-cal, rms=0.389100Jy sigma=0.001277 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.449 x 8.14 at -13.71 degrees (North through East) ! Clean map min=-0.0084766 max=0.13531 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389100Jy sigma=0.001277 ! Fit after self-cal, rms=0.389100Jy sigma=0.001277 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389100Jy sigma=0.001277 ! Fit after self-cal, rms=0.388993Jy sigma=0.001277 ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=8.14 mas, bpa=-13.71 degrees ! Estimated noise=1207.19 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109951 Jy ! Component: 100 - total flux cleaned = 0.00109978 Jy ! Component: 150 - total flux cleaned = 0.00110829 Jy ! Component: 200 - total flux cleaned = 0.0012229 Jy ! Total flux subtracted in 200 components = 0.0012229 Jy ! Clean residual min=-0.007768 max=0.009935 Jy/beam ! Clean residual mean=0.000157 rms=0.002601 Jy/beam ! Combined flux in latest and established models = 0.310989 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 164 components and 0.310989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388939Jy sigma=0.001277 ! Fit after self-cal, rms=0.388940Jy sigma=0.001276 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388940Jy sigma=0.001276 ! Fit after self-cal, rms=0.388513Jy sigma=0.001276 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388513Jy sigma=0.001276 ! Fit after self-cal, rms=0.388522Jy sigma=0.001276 ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=8.008 mas, bpa=-14.23 degrees ! Estimated noise=1206.39 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289257 Jy ! Component: 100 - total flux cleaned = 0.00318962 Jy ! Component: 150 - total flux cleaned = 0.00353048 Jy ! Component: 200 - total flux cleaned = 0.00368028 Jy ! Total flux subtracted in 200 components = 0.00368028 Jy ! Clean residual min=-0.007558 max=0.009703 Jy/beam ! Clean residual mean=0.000138 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.31467 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 175 components and 0.31467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388483Jy sigma=0.001276 ! Fit after self-cal, rms=0.388397Jy sigma=0.001276 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.816 mas, bmaj=14.78 mas, bpa=-9.901 degrees ! Estimated noise=1528.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284657 Jy ! Component: 100 - total flux cleaned = 0.00310494 Jy ! Component: 150 - total flux cleaned = 0.00333324 Jy ! Component: 200 - total flux cleaned = 0.00352679 Jy ! Total flux subtracted in 200 components = 0.00352679 Jy ! Clean residual min=-0.009900 max=0.015057 Jy/beam ! Clean residual mean=0.000254 rms=0.004078 Jy/beam ! Combined flux in latest and established models = 0.318196 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 182 components and 0.318196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388396Jy sigma=0.001276 ! Fit after self-cal, rms=0.388325Jy sigma=0.001276 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=6.521 mas, bpa=-13.41 degrees ! Estimated noise=2367.79 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130281 Jy ! Component: 100 - total flux cleaned = 0.1888 Jy ! Component: 150 - total flux cleaned = 0.224961 Jy ! Component: 200 - total flux cleaned = 0.249562 Jy ! Total flux subtracted in 200 components = 0.249562 Jy ! Clean residual min=-0.013939 max=0.016968 Jy/beam ! Clean residual mean=0.000202 rms=0.004285 Jy/beam ! Combined flux in latest and established models = 0.249563 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.249563 Jy ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=8.008 mas, bpa=-14.23 degrees ! Estimated noise=1206.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299013 Jy ! Component: 100 - total flux cleaned = 0.0461733 Jy ! Component: 150 - total flux cleaned = 0.0554378 Jy ! Component: 200 - total flux cleaned = 0.0585413 Jy ! Total flux subtracted in 200 components = 0.0585413 Jy ! Clean residual min=-0.007862 max=0.009474 Jy/beam ! Clean residual mean=0.000153 rms=0.002606 Jy/beam ! Combined flux in latest and established models = 0.308104 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 87 components and 0.308104 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.816 mas, bmaj=14.78 mas, bpa=-9.901 degrees ! Estimated noise=1528.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705368 Jy ! Component: 100 - total flux cleaned = 0.00814422 Jy ! Component: 150 - total flux cleaned = 0.00852643 Jy ! Component: 200 - total flux cleaned = 0.00886948 Jy ! Total flux subtracted in 200 components = 0.00886948 Jy ! Clean residual min=-0.010005 max=0.014434 Jy/beam ! Clean residual mean=0.000262 rms=0.004131 Jy/beam ! Combined flux in latest and established models = 0.316973 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 0.316973 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=8.008 mas, bpa=-14.23 degrees ! Estimated noise=1206.39 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118047 Jy ! Component: 100 - total flux cleaned = -0.00105929 Jy ! Component: 150 - total flux cleaned = -0.000951398 Jy ! Component: 200 - total flux cleaned = -0.000856537 Jy ! Total flux subtracted in 200 components = -0.000856537 Jy ! Clean residual min=-0.007963 max=0.009165 Jy/beam ! Clean residual mean=0.000136 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.316117 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 117 components and 0.316117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388356Jy sigma=0.001276 ! Fit after self-cal, rms=0.388239Jy sigma=0.001276 wmodel J0438-2012_S_1997_08_27_yyk\_map.mod ! Writing 117 model components to file: J0438-2012_S_1997_08_27_yyk_map.mod wobs J0438-2012_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J0438-2012_S_1997_08_27_yyk_uvs.fits wwins J0438-2012_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J0438-2012_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364324 Jy ! Component: 100 - total flux cleaned = 0.00577188 Jy ! Component: 150 - total flux cleaned = 0.00749421 Jy ! Component: 200 - total flux cleaned = 0.00841397 Jy ! Component: 250 - total flux cleaned = 0.00950051 Jy ! Component: 300 - total flux cleaned = 0.010436 Jy ! Component: 350 - total flux cleaned = 0.0113358 Jy ! Component: 400 - total flux cleaned = 0.012106 Jy ! Component: 450 - total flux cleaned = 0.0126656 Jy ! Component: 500 - total flux cleaned = 0.0133009 Jy ! Component: 550 - total flux cleaned = 0.0137422 Jy ! Component: 600 - total flux cleaned = 0.0140872 Jy ! Component: 650 - total flux cleaned = 0.0144245 Jy ! Component: 700 - total flux cleaned = 0.0146715 Jy ! Component: 750 - total flux cleaned = 0.0152364 Jy ! Component: 800 - total flux cleaned = 0.0155522 Jy ! Component: 850 - total flux cleaned = 0.0159383 Jy ! Component: 900 - total flux cleaned = 0.0160159 Jy ! Component: 950 - total flux cleaned = 0.0161653 Jy ! Component: 1000 - total flux cleaned = 0.0163847 Jy ! Component: 1050 - total flux cleaned = 0.0163851 Jy ! Component: 1100 - total flux cleaned = 0.0164543 Jy ! Component: 1150 - total flux cleaned = 0.016453 Jy ! Component: 1200 - total flux cleaned = 0.0162495 Jy ! Component: 1250 - total flux cleaned = 0.0160497 Jy ! Component: 1300 - total flux cleaned = 0.0159191 Jy ! Component: 1350 - total flux cleaned = 0.0157897 Jy ! Component: 1400 - total flux cleaned = 0.0154091 Jy ! Component: 1450 - total flux cleaned = 0.0153462 Jy ! Component: 1500 - total flux cleaned = 0.0152239 Jy ! Component: 1550 - total flux cleaned = 0.0150407 Jy ! Component: 1600 - total flux cleaned = 0.0149223 Jy ! Component: 1650 - total flux cleaned = 0.0147465 Jy ! Component: 1700 - total flux cleaned = 0.0145738 Jy ! Component: 1750 - total flux cleaned = 0.0143451 Jy ! Component: 1800 - total flux cleaned = 0.0140636 Jy ! Component: 1850 - total flux cleaned = 0.0137863 Jy ! Component: 1900 - total flux cleaned = 0.0136219 Jy ! Component: 1950 - total flux cleaned = 0.0132431 Jy ! Component: 2000 - total flux cleaned = 0.0129761 Jy ! Total flux subtracted in 2048 components = 0.0127115 Jy ! Clean residual min=-0.003626 max=0.003389 Jy/beam ! Clean residual mean=0.000032 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.328828 Jy keep ! Adding 163 model components to the UV plane model. ! The established model now contains 280 components and 0.328828 Jy ![Exited script file: muppet] wmap "J0438-2012_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 8.008 at -14.23 degrees (North through East) ! Clean map min=-0.0059822 max=0.13737 Jy/beam ! Writing clean map to FITS file: J0438-2012_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137373 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0011547 device "J0438-2012_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0438-2012_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.52169 2.52169 5.04338 10.0868 20.1735 40.347 80.694 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 8.008 at -14.23 degrees (North through East) ! Clean map min=-0.0059822 max=0.13737 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0438-2012_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0438-2012_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0438-2012_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 16:18:42 2007