! Started logfile: J0423-0120_S_1994_08_12_yyk_uvs.log on Sun Jan 7 16:14:40 2007 obs J0423-0120_S_1994_08_12_yyk_uva.fits ! Reading UV FITS file: J0423-0120_S_1994_08_12_yyk_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.537908 visibilities/baseline/integration-bin. ! Found source: J0423-0120 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 784 lines of history. ! ! Reading 3292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0423-0120_S_1994_08_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.80928 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=13.94 mas, bpa=-17.58 degrees ! Estimated noise=2955.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.18804 Jy ! Component: 100 - total flux cleaned = 2.53224 Jy ! Total flux subtracted in 100 components = 2.53224 Jy ! Clean residual min=-0.199404 max=0.239899 Jy/beam ! Clean residual mean=-0.003422 rms=0.074558 Jy/beam ! Combined flux in latest and established models = 2.53224 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 2.53224 Jy ! ! Correcting IF 1. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.705262Jy sigma=0.004908 ! Fit after self-cal, rms=0.600267Jy sigma=0.004341 ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=13.94 mas, bpa=-17.58 degrees ! Estimated noise=2974.65 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.268 mas, bmaj=12.89 mas, bpa=-14.28 degrees ! Estimated noise=1590.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.297522 Jy ! Component: 100 - total flux cleaned = 0.284307 Jy ! Component: 150 - total flux cleaned = 0.284247 Jy ! Component: 200 - total flux cleaned = 0.290407 Jy ! Total flux subtracted in 200 components = 0.290407 Jy ! Clean residual min=-0.080372 max=0.091991 Jy/beam ! Clean residual mean=0.000518 rms=0.026269 Jy/beam ! Combined flux in latest and established models = 2.82265 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 52 components and 2.82265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.446018Jy sigma=0.003392 ! Fit after self-cal, rms=0.446006Jy sigma=0.003391 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.268 x 12.89 at -14.28 degrees (North through East) ! Clean map min=-0.084802 max=2.6929 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03576 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.01 KP 0.92 ! LA 0.96 MK 0.98 NL 0.91 OV 0.96 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.0141 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 1.02 KP 0.94 ! LA 1.04 MK 1.01 NL 0.90 OV 0.95 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.0205 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 HN 1.00 KP 0.94 ! LA 0.84 MK 0.94 NL 0.97 OV 1.02 ! PT 1.11 SC 1.00* ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.969427 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.10 HN 1.07 KP 1.00 ! LA 0.88 MK 1.07 NL 0.95 OV 1.28 ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.446006Jy sigma=0.003391 ! Fit after self-cal, rms=0.345559Jy sigma=0.002567 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345559Jy sigma=0.002567 ! Fit after self-cal, rms=0.345510Jy sigma=0.002567 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.295 mas, bmaj=12.87 mas, bpa=-14.64 degrees ! Estimated noise=1609.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0558925 Jy ! Component: 100 - total flux cleaned = 0.0584652 Jy ! Component: 150 - total flux cleaned = 0.0602283 Jy ! Component: 200 - total flux cleaned = 0.059542 Jy ! Total flux subtracted in 200 components = 0.059542 Jy ! Clean residual min=-0.022072 max=0.029824 Jy/beam ! Clean residual mean=0.000158 rms=0.007434 Jy/beam ! Combined flux in latest and established models = 2.88219 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 84 components and 2.88219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337176Jy sigma=0.002505 ! Fit after self-cal, rms=0.337169Jy sigma=0.002505 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337169Jy sigma=0.002505 ! Fit after self-cal, rms=0.303100Jy sigma=0.002257 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000921215 Jy ! Component: 100 - total flux cleaned = -7.37979e-05 Jy ! Component: 150 - total flux cleaned = -0.00178093 Jy ! Component: 200 - total flux cleaned = -0.00365934 Jy ! Total flux subtracted in 200 components = -0.00365934 Jy ! Clean residual min=-0.024047 max=0.031184 Jy/beam ! Clean residual mean=0.000160 rms=0.007074 Jy/beam ! Combined flux in latest and established models = 2.87853 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 109 components and 2.87853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301780Jy sigma=0.002248 ! Fit after self-cal, rms=0.293649Jy sigma=0.002193 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.295 x 12.87 at -14.64 degrees (North through East) ! Clean map min=-0.035851 max=2.7278 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293649Jy sigma=0.002193 ! Fit after self-cal, rms=0.257242Jy sigma=0.001900 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257242Jy sigma=0.001900 ! Fit after self-cal, rms=0.254557Jy sigma=0.001882 ! Inverting map and beam ! Estimated beam: bmin=4.291 mas, bmaj=12.86 mas, bpa=-14.7 degrees ! Estimated noise=1605.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00960901 Jy ! Component: 100 - total flux cleaned = 0.00861448 Jy ! Component: 150 - total flux cleaned = 0.00678639 Jy ! Component: 200 - total flux cleaned = 0.0053501 Jy ! Total flux subtracted in 200 components = 0.0053501 Jy ! Clean residual min=-0.012052 max=0.015020 Jy/beam ! Clean residual mean=0.000075 rms=0.003829 Jy/beam ! Combined flux in latest and established models = 2.88388 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 115 components and 2.88388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253043Jy sigma=0.001870 ! Fit after self-cal, rms=0.252195Jy sigma=0.001864 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252195Jy sigma=0.001864 ! Fit after self-cal, rms=0.250830Jy sigma=0.001857 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250830Jy sigma=0.001857 ! Fit after self-cal, rms=0.250557Jy sigma=0.001855 ! Inverting map and beam ! Estimated beam: bmin=4.284 mas, bmaj=12.86 mas, bpa=-14.74 degrees ! Estimated noise=1604.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044902 Jy ! Component: 100 - total flux cleaned = 0.00359044 Jy ! Component: 150 - total flux cleaned = 0.00248409 Jy ! Component: 200 - total flux cleaned = 0.00157342 Jy ! Total flux subtracted in 200 components = 0.00157342 Jy ! Clean residual min=-0.010031 max=0.012036 Jy/beam ! Clean residual mean=0.000076 rms=0.003070 Jy/beam ! Combined flux in latest and established models = 2.88546 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 122 components and 2.88546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250058Jy sigma=0.001851 ! Fit after self-cal, rms=0.249983Jy sigma=0.001851 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.519 mas, bmaj=13.84 mas, bpa=-1.96 degrees ! Estimated noise=1823.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208194 Jy ! Component: 100 - total flux cleaned = -0.00236067 Jy ! Component: 150 - total flux cleaned = -0.00244863 Jy ! Component: 200 - total flux cleaned = -0.00260275 Jy ! Total flux subtracted in 200 components = -0.00260275 Jy ! Clean residual min=-0.010894 max=0.014432 Jy/beam ! Clean residual mean=0.000132 rms=0.003436 Jy/beam ! Combined flux in latest and established models = 2.88286 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 2.88286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249975Jy sigma=0.001850 ! Fit after self-cal, rms=0.249954Jy sigma=0.001850 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=14 mas, bpa=-17.75 degrees ! Estimated noise=3012.08 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.32418 Jy ! Component: 100 - total flux cleaned = 2.6953 Jy ! Component: 150 - total flux cleaned = 2.80352 Jy ! Component: 200 - total flux cleaned = 2.84968 Jy ! Total flux subtracted in 200 components = 2.84968 Jy ! Clean residual min=-0.020753 max=0.019576 Jy/beam ! Clean residual mean=0.000477 rms=0.005959 Jy/beam ! Combined flux in latest and established models = 2.84968 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 2.84968 Jy ! Inverting map and beam ! Estimated beam: bmin=4.284 mas, bmaj=12.86 mas, bpa=-14.74 degrees ! Estimated noise=1604.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197232 Jy ! Component: 100 - total flux cleaned = 0.0229451 Jy ! Component: 150 - total flux cleaned = 0.0249258 Jy ! Component: 200 - total flux cleaned = 0.0265077 Jy ! Total flux subtracted in 200 components = 0.0265077 Jy ! Clean residual min=-0.011234 max=0.013559 Jy/beam ! Clean residual mean=0.000073 rms=0.003773 Jy/beam ! Combined flux in latest and established models = 2.87619 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 74 components and 2.87619 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.519 mas, bmaj=13.84 mas, bpa=-1.96 degrees ! Estimated noise=1823.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387967 Jy ! Component: 100 - total flux cleaned = 0.00411815 Jy ! Component: 150 - total flux cleaned = 0.00455314 Jy ! Component: 200 - total flux cleaned = 0.00490875 Jy ! Total flux subtracted in 200 components = 0.00490875 Jy ! Clean residual min=-0.009490 max=0.015379 Jy/beam ! Clean residual mean=0.000111 rms=0.003843 Jy/beam ! Combined flux in latest and established models = 2.8811 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 2.8811 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.284 mas, bmaj=12.86 mas, bpa=-14.74 degrees ! Estimated noise=1604.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837279 Jy ! Component: 100 - total flux cleaned = 0.00145127 Jy ! Component: 150 - total flux cleaned = 0.00145158 Jy ! Component: 200 - total flux cleaned = 0.00145177 Jy ! Total flux subtracted in 200 components = 0.00145177 Jy ! Clean residual min=-0.009599 max=0.012952 Jy/beam ! Clean residual mean=0.000064 rms=0.003359 Jy/beam ! Combined flux in latest and established models = 2.88255 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 110 components and 2.88255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250268Jy sigma=0.001853 ! Fit after self-cal, rms=0.250244Jy sigma=0.001853 wmodel J0423-0120_S_1994_08_12_yyk\_map.mod ! Writing 110 model components to file: J0423-0120_S_1994_08_12_yyk_map.mod wobs J0423-0120_S_1994_08_12_yyk\_uvs.fits ! Writing UV FITS file: J0423-0120_S_1994_08_12_yyk_uvs.fits wwins J0423-0120_S_1994_08_12_yyk\_map.win ! wwins: Wrote 1 windows to J0423-0120_S_1994_08_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555846 Jy ! Component: 100 - total flux cleaned = 0.008916 Jy ! Component: 150 - total flux cleaned = 0.00799082 Jy ! Component: 200 - total flux cleaned = 0.00785023 Jy ! Component: 250 - total flux cleaned = 0.00799001 Jy ! Component: 300 - total flux cleaned = 0.00824262 Jy ! Component: 350 - total flux cleaned = 0.00811702 Jy ! Component: 400 - total flux cleaned = 0.00754036 Jy ! Component: 450 - total flux cleaned = 0.00709933 Jy ! Component: 500 - total flux cleaned = 0.00678139 Jy ! Component: 550 - total flux cleaned = 0.00657575 Jy ! Component: 600 - total flux cleaned = 0.00677099 Jy ! Component: 650 - total flux cleaned = 0.00667692 Jy ! Component: 700 - total flux cleaned = 0.00667856 Jy ! Component: 750 - total flux cleaned = 0.00668031 Jy ! Component: 800 - total flux cleaned = 0.00676447 Jy ! Component: 850 - total flux cleaned = 0.00660027 Jy ! Component: 900 - total flux cleaned = 0.0065194 Jy ! Component: 950 - total flux cleaned = 0.00636397 Jy ! Component: 1000 - total flux cleaned = 0.00606277 Jy ! Component: 1050 - total flux cleaned = 0.00628228 Jy ! Component: 1100 - total flux cleaned = 0.00606781 Jy ! Component: 1150 - total flux cleaned = 0.00600122 Jy ! Component: 1200 - total flux cleaned = 0.00606943 Jy ! Component: 1250 - total flux cleaned = 0.00613275 Jy ! Component: 1300 - total flux cleaned = 0.00594201 Jy ! Component: 1350 - total flux cleaned = 0.00587987 Jy ! Component: 1400 - total flux cleaned = 0.00563975 Jy ! Component: 1450 - total flux cleaned = 0.00546381 Jy ! Component: 1500 - total flux cleaned = 0.00512397 Jy ! Component: 1550 - total flux cleaned = 0.00512344 Jy ! Component: 1600 - total flux cleaned = 0.00496133 Jy ! Component: 1650 - total flux cleaned = 0.00517399 Jy ! Component: 1700 - total flux cleaned = 0.00517359 Jy ! Component: 1750 - total flux cleaned = 0.00512263 Jy ! Component: 1800 - total flux cleaned = 0.00522311 Jy ! Component: 1850 - total flux cleaned = 0.0052738 Jy ! Component: 1900 - total flux cleaned = 0.00556299 Jy ! Component: 1950 - total flux cleaned = 0.00584696 Jy ! Component: 2000 - total flux cleaned = 0.00612687 Jy ! Total flux subtracted in 2048 components = 0.00626459 Jy ! Clean residual min=-0.002427 max=0.002784 Jy/beam ! Clean residual mean=0.000073 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 2.88881 Jy keep ! Adding 146 model components to the UV plane model. ! The established model now contains 256 components and 2.88881 Jy ![Exited script file: muppet] wmap "J0423-0120_S_1994_08_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.284 x 12.86 at -14.74 degrees (North through East) ! Clean map min=-0.014032 max=2.7279 Jy/beam ! Writing clean map to FITS file: J0423-0120_S_1994_08_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.72794 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000971942 device "J0423-0120_S_1994_08_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0423-0120_S_1994_08_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.106887 0.106887 0.213775 0.427549 0.855099 1.7102 3.4204 6.84079 13.6816 27.3632 54.7263 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.727 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.284 x 12.86 at -14.74 degrees (North through East) ! Clean map min=-0.014032 max=2.7279 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0423-0120_S_1994_08_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0423-0120_S_1994_08_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0423-0120_S_1994_08_12_yyk_uvs.log closed on Sun Jan 7 16:14:45 2007