! Started logfile: J0416-2056_S_1997_07_02_yyk_uvs.log on Sun Jan 7 16:13:44 2007 obs J0416-2056_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0416-2056_S_1997_07_02_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.279 visibilities/baseline/integration-bin. ! Found source: J0416-2056 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 33612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0416-2056_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.535626 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=8.475 mas, bpa=-3.703 degrees ! Estimated noise=2156.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.33255 Jy ! Component: 100 - total flux cleaned = 0.399373 Jy ! Total flux subtracted in 100 components = 0.399373 Jy ! Clean residual min=-0.023220 max=0.031558 Jy/beam ! Clean residual mean=0.000551 rms=0.006802 Jy/beam ! Combined flux in latest and established models = 0.399373 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.399373 Jy ! ! Correcting IF 1. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.344290Jy sigma=0.001520 ! Fit after self-cal, rms=0.343173Jy sigma=0.001515 ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=8.475 mas, bpa=-3.703 degrees ! Estimated noise=2156.84 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.878 mas, bmaj=10.79 mas, bpa=-4.239 degrees ! Estimated noise=1026.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571748 Jy ! Component: 100 - total flux cleaned = 0.0804867 Jy ! Component: 150 - total flux cleaned = 0.0924504 Jy ! Component: 200 - total flux cleaned = 0.0956389 Jy ! Total flux subtracted in 200 components = 0.0956389 Jy ! Clean residual min=-0.011363 max=0.019282 Jy/beam ! Clean residual mean=0.000560 rms=0.004655 Jy/beam ! Combined flux in latest and established models = 0.495012 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 70 model components to the UV plane model. ! The established model now contains 82 components and 0.495012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.336217Jy sigma=0.001484 ! Fit after self-cal, rms=0.335724Jy sigma=0.001481 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.878 x 10.79 at -4.239 degrees (North through East) ! Clean map min=-0.0098841 max=0.38911 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01426 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.13 HN 0.94 KP 0.91 ! LA 0.98 MK 1.03 NL 1.00* OV 1.10 ! PT 0.94 SC 0.88 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.97701 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.21 HN 0.99 KP 0.97 ! LA 1.09 MK 1.08 NL 0.98 OV 1.04 ! PT 0.93 SC 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04532 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 0.93 KP 0.91 ! LA 0.79 MK 0.87 NL 0.97 OV 0.94 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.996863 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.14 HN 1.15 KP 0.90 ! LA 0.89 MK 1.04 NL 1.08 OV 0.95 ! PT 0.91 SC 1.01 ! ! ! Fit before self-cal, rms=0.335724Jy sigma=0.001481 ! Fit after self-cal, rms=0.327885Jy sigma=0.001464 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327885Jy sigma=0.001464 ! Fit after self-cal, rms=0.327884Jy sigma=0.001464 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=10.7 mas, bpa=-3.495 degrees ! Estimated noise=1024.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, -12). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162696 Jy ! Component: 100 - total flux cleaned = 0.0186222 Jy ! Component: 150 - total flux cleaned = 0.0193772 Jy ! Component: 200 - total flux cleaned = 0.0193882 Jy ! Total flux subtracted in 200 components = 0.0193882 Jy ! Clean residual min=-0.006230 max=0.008084 Jy/beam ! Clean residual mean=0.000305 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 0.5144 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 115 components and 0.5144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327140Jy sigma=0.001461 ! Fit after self-cal, rms=0.327092Jy sigma=0.001461 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327092Jy sigma=0.001461 ! Fit after self-cal, rms=0.324921Jy sigma=0.001451 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389654 Jy ! Component: 100 - total flux cleaned = 0.00467005 Jy ! Component: 150 - total flux cleaned = 0.00467355 Jy ! Component: 200 - total flux cleaned = 0.00452104 Jy ! Total flux subtracted in 200 components = 0.00452104 Jy ! Clean residual min=-0.005555 max=0.007652 Jy/beam ! Clean residual mean=0.000293 rms=0.001740 Jy/beam ! Combined flux in latest and established models = 0.518921 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 131 components and 0.518921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324724Jy sigma=0.001450 ! Fit after self-cal, rms=0.324503Jy sigma=0.001449 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.869 x 10.7 at -3.495 degrees (North through East) ! Clean map min=-0.0054839 max=0.39044 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324503Jy sigma=0.001449 ! Fit after self-cal, rms=0.318462Jy sigma=0.001444 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318462Jy sigma=0.001444 ! Fit after self-cal, rms=0.318408Jy sigma=0.001444 ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=10.66 mas, bpa=-3.758 degrees ! Estimated noise=1015.88 mJy/beam. ! Added new window around map position (-3, 62). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00908821 Jy ! Component: 100 - total flux cleaned = 0.013294 Jy ! Component: 150 - total flux cleaned = 0.0142969 Jy ! Component: 200 - total flux cleaned = 0.0146472 Jy ! Total flux subtracted in 200 components = 0.0146472 Jy ! Clean residual min=-0.005007 max=0.005495 Jy/beam ! Clean residual mean=0.000154 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.533568 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 173 components and 0.533568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318195Jy sigma=0.001443 ! Fit after self-cal, rms=0.318159Jy sigma=0.001443 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318159Jy sigma=0.001443 ! Fit after self-cal, rms=0.317997Jy sigma=0.001441 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317997Jy sigma=0.001441 ! Fit after self-cal, rms=0.317982Jy sigma=0.001441 ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=10.65 mas, bpa=-3.762 degrees ! Estimated noise=1014.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222629 Jy ! Component: 100 - total flux cleaned = 0.00257269 Jy ! Component: 150 - total flux cleaned = 0.0023695 Jy ! Component: 200 - total flux cleaned = 0.00217634 Jy ! Total flux subtracted in 200 components = 0.00217634 Jy ! Clean residual min=-0.004920 max=0.005471 Jy/beam ! Clean residual mean=0.000135 rms=0.001417 Jy/beam ! Combined flux in latest and established models = 0.535745 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 190 components and 0.535745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317914Jy sigma=0.001441 ! Fit after self-cal, rms=0.317901Jy sigma=0.001441 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.285 mas, bmaj=17.86 mas, bpa=-5.807 degrees ! Estimated noise=1223.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248643 Jy ! Component: 100 - total flux cleaned = -1.45005e-05 Jy ! Component: 150 - total flux cleaned = -0.000244509 Jy ! Component: 200 - total flux cleaned = -0.000448909 Jy ! Total flux subtracted in 200 components = -0.000448909 Jy ! Clean residual min=-0.004972 max=0.005204 Jy/beam ! Clean residual mean=0.000231 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.535296 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 218 components and 0.535296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317887Jy sigma=0.001441 ! Fit after self-cal, rms=0.317877Jy sigma=0.001440 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=8.439 mas, bpa=-3.622 degrees ! Estimated noise=2132.77 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.330824 Jy ! Component: 100 - total flux cleaned = 0.405012 Jy ! Component: 150 - total flux cleaned = 0.442389 Jy ! Component: 200 - total flux cleaned = 0.468115 Jy ! Total flux subtracted in 200 components = 0.468115 Jy ! Clean residual min=-0.013193 max=0.013135 Jy/beam ! Clean residual mean=0.000185 rms=0.004087 Jy/beam ! Combined flux in latest and established models = 0.468115 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.468115 Jy ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=10.65 mas, bpa=-3.762 degrees ! Estimated noise=1014.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291111 Jy ! Component: 100 - total flux cleaned = 0.044306 Jy ! Component: 150 - total flux cleaned = 0.0535087 Jy ! Component: 200 - total flux cleaned = 0.0581406 Jy ! Total flux subtracted in 200 components = 0.0581406 Jy ! Clean residual min=-0.005337 max=0.005826 Jy/beam ! Clean residual mean=0.000179 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 0.526256 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 92 components and 0.526256 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.285 mas, bmaj=17.86 mas, bpa=-5.807 degrees ! Estimated noise=1223.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711082 Jy ! Component: 100 - total flux cleaned = 0.0082623 Jy ! Component: 150 - total flux cleaned = 0.00889185 Jy ! Component: 200 - total flux cleaned = 0.00901771 Jy ! Total flux subtracted in 200 components = 0.00901771 Jy ! Clean residual min=-0.005468 max=0.005523 Jy/beam ! Clean residual mean=0.000238 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.535273 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 139 components and 0.535273 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=10.65 mas, bpa=-3.762 degrees ! Estimated noise=1014.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221389 Jy ! Component: 100 - total flux cleaned = -0.000227522 Jy ! Component: 150 - total flux cleaned = -0.000235135 Jy ! Component: 200 - total flux cleaned = -0.000342531 Jy ! Total flux subtracted in 200 components = -0.000342531 Jy ! Clean residual min=-0.004965 max=0.005496 Jy/beam ! Clean residual mean=0.000150 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.534931 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 172 components and 0.534931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317940Jy sigma=0.001441 ! Fit after self-cal, rms=0.317898Jy sigma=0.001441 wmodel J0416-2056_S_1997_07_02_yyk\_map.mod ! Writing 172 model components to file: J0416-2056_S_1997_07_02_yyk_map.mod wobs J0416-2056_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0416-2056_S_1997_07_02_yyk_uvs.fits wwins J0416-2056_S_1997_07_02_yyk\_map.win ! wwins: Wrote 4 windows to J0416-2056_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162763 Jy ! Component: 100 - total flux cleaned = 0.00296872 Jy ! Component: 150 - total flux cleaned = 0.00343627 Jy ! Component: 200 - total flux cleaned = 0.00380811 Jy ! Component: 250 - total flux cleaned = 0.00409187 Jy ! Component: 300 - total flux cleaned = 0.00415835 Jy ! Component: 350 - total flux cleaned = 0.00428891 Jy ! Component: 400 - total flux cleaned = 0.00435155 Jy ! Component: 450 - total flux cleaned = 0.00453685 Jy ! Component: 500 - total flux cleaned = 0.00453672 Jy ! Component: 550 - total flux cleaned = 0.00453766 Jy ! Component: 600 - total flux cleaned = 0.00470757 Jy ! Component: 650 - total flux cleaned = 0.00454131 Jy ! Component: 700 - total flux cleaned = 0.00454257 Jy ! Component: 750 - total flux cleaned = 0.00438608 Jy ! Component: 800 - total flux cleaned = 0.00428503 Jy ! Component: 850 - total flux cleaned = 0.00413493 Jy ! Component: 900 - total flux cleaned = 0.00393854 Jy ! Component: 950 - total flux cleaned = 0.00379458 Jy ! Component: 1000 - total flux cleaned = 0.00370036 Jy ! Component: 1050 - total flux cleaned = 0.00360837 Jy ! Component: 1100 - total flux cleaned = 0.00356356 Jy ! Component: 1150 - total flux cleaned = 0.0034748 Jy ! Component: 1200 - total flux cleaned = 0.00334352 Jy ! Component: 1250 - total flux cleaned = 0.00334324 Jy ! Component: 1300 - total flux cleaned = 0.00338485 Jy ! Component: 1350 - total flux cleaned = 0.00338474 Jy ! Component: 1400 - total flux cleaned = 0.00338494 Jy ! Component: 1450 - total flux cleaned = 0.00362709 Jy ! Component: 1500 - total flux cleaned = 0.00358661 Jy ! Component: 1550 - total flux cleaned = 0.00366537 Jy ! Component: 1600 - total flux cleaned = 0.00370415 Jy ! Component: 1650 - total flux cleaned = 0.00385662 Jy ! Component: 1700 - total flux cleaned = 0.00381882 Jy ! Component: 1750 - total flux cleaned = 0.00385596 Jy ! Component: 1800 - total flux cleaned = 0.00392919 Jy ! Component: 1850 - total flux cleaned = 0.00400108 Jy ! Component: 1900 - total flux cleaned = 0.0039296 Jy ! Component: 1950 - total flux cleaned = 0.00400031 Jy ! Component: 2000 - total flux cleaned = 0.00393058 Jy ! Total flux subtracted in 2048 components = 0.00393088 Jy ! Clean residual min=-0.002603 max=0.002055 Jy/beam ! Clean residual mean=0.000120 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.538862 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 314 components and 0.538862 Jy ![Exited script file: muppet] wmap "J0416-2056_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.83 x 10.65 at -3.762 degrees (North through East) ! Clean map min=-0.0044429 max=0.39113 Jy/beam ! Writing clean map to FITS file: J0416-2056_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.391128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000749757 device "J0416-2056_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0416-2056_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.575073 0.575073 1.15015 2.30029 4.60059 9.20117 18.4023 36.8047 73.6094 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.391 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.83 x 10.65 at -3.762 degrees (North through East) ! Clean map min=-0.0044429 max=0.39113 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0416-2056_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0416-2056_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0416-2056_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 16:13:52 2007