! Started logfile: J0408-0529_S_1997_05_07_yyk_uvs.log on Sun Jan 7 16:11:58 2007 obs J0408-0529_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J0408-0529_S_1997_05_07_yyk_uva.fits ! AN table 1: 139 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968985 visibilities/baseline/integration-bin. ! Found source: J0408-0529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 615 lines of history. ! ! Reading 24244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0408-0529_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.86698 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.663 mas, bpa=-1.965 degrees ! Estimated noise=1702.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236704 Jy ! Component: 100 - total flux cleaned = 0.0273668 Jy ! Total flux subtracted in 100 components = 0.0273668 Jy ! Clean residual min=-0.022335 max=0.022342 Jy/beam ! Clean residual mean=0.000308 rms=0.008543 Jy/beam ! Combined flux in latest and established models = 0.0273668 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.0273668 Jy ! ! Correcting IF 1. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.865743Jy sigma=0.005507 ! Fit after self-cal, rms=1.865753Jy sigma=0.005507 ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.663 mas, bpa=-1.964 degrees ! Estimated noise=1702.82 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.839 mas, bpa=-5.002 degrees ! Estimated noise=1089.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0378214 Jy ! Component: 100 - total flux cleaned = 0.0548348 Jy ! Component: 150 - total flux cleaned = 0.059807 Jy ! Component: 200 - total flux cleaned = 0.0625074 Jy ! Total flux subtracted in 200 components = 0.0625074 Jy ! Clean residual min=-0.013388 max=0.014277 Jy/beam ! Clean residual mean=-0.000025 rms=0.003831 Jy/beam ! Combined flux in latest and established models = 0.0898742 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 74 components and 0.0898741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.865205Jy sigma=0.005503 ! Fit after self-cal, rms=1.865108Jy sigma=0.005503 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 8.839 at -5.002 degrees (North through East) ! Clean map min=-0.013439 max=0.048975 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=1.865108Jy sigma=0.005503 ! Fit after self-cal, rms=1.865108Jy sigma=0.005503 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.865108Jy sigma=0.005503 ! Fit after self-cal, rms=1.865109Jy sigma=0.005503 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.839 mas, bpa=-5.002 degrees ! Estimated noise=1089.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106976 Jy ! Component: 100 - total flux cleaned = 0.0139855 Jy ! Component: 150 - total flux cleaned = 0.0160024 Jy ! Component: 200 - total flux cleaned = 0.0167749 Jy ! Total flux subtracted in 200 components = 0.0167749 Jy ! Clean residual min=-0.012793 max=0.012583 Jy/beam ! Clean residual mean=-0.000062 rms=0.003518 Jy/beam ! Combined flux in latest and established models = 0.106649 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 101 components and 0.106649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.865005Jy sigma=0.005502 ! Fit after self-cal, rms=1.864997Jy sigma=0.005502 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.864997Jy sigma=0.005502 ! Fit after self-cal, rms=1.863871Jy sigma=0.005498 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175813 Jy ! Component: 100 - total flux cleaned = 0.00290406 Jy ! Component: 150 - total flux cleaned = 0.0034135 Jy ! Component: 200 - total flux cleaned = 0.00476801 Jy ! Total flux subtracted in 200 components = 0.00476801 Jy ! Clean residual min=-0.019381 max=0.021159 Jy/beam ! Clean residual mean=-0.000117 rms=0.006055 Jy/beam ! Combined flux in latest and established models = 0.111417 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 118 components and 0.111417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.863352Jy sigma=0.005496 ! Fit after self-cal, rms=1.862743Jy sigma=0.005494 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 8.839 at -5.002 degrees (North through East) ! Clean map min=-0.026248 max=0.059805 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=14 mas, bpa=6.978 degrees ! Estimated noise=1337.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253588 Jy ! Component: 100 - total flux cleaned = 0.00283224 Jy ! Component: 150 - total flux cleaned = 0.00339821 Jy ! Component: 200 - total flux cleaned = 0.00392849 Jy ! Total flux subtracted in 200 components = 0.00392849 Jy ! Clean residual min=-0.014273 max=0.018264 Jy/beam ! Clean residual mean=-0.000389 rms=0.004236 Jy/beam ! Combined flux in latest and established models = 0.115346 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 130 components and 0.115346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.862355Jy sigma=0.005493 ! Fit after self-cal, rms=1.862131Jy sigma=0.005492 ! Inverting map ! Added new window around map position (-1, -38). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126357 Jy ! Component: 100 - total flux cleaned = 0.0115875 Jy ! Component: 150 - total flux cleaned = 0.0120076 Jy ! Component: 200 - total flux cleaned = 0.0120244 Jy ! Total flux subtracted in 200 components = 0.0120244 Jy ! Clean residual min=-0.010624 max=0.010516 Jy/beam ! Clean residual mean=-0.000387 rms=0.003541 Jy/beam ! Combined flux in latest and established models = 0.12737 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 0.12737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.861202Jy sigma=0.005490 ! Fit after self-cal, rms=1.861041Jy sigma=0.005489 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.663 mas, bpa=-1.964 degrees ! Estimated noise=1702.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0553947 Jy ! Component: 100 - total flux cleaned = 0.0708532 Jy ! Component: 150 - total flux cleaned = 0.0811365 Jy ! Component: 200 - total flux cleaned = 0.0842007 Jy ! Total flux subtracted in 200 components = 0.0842007 Jy ! Clean residual min=-0.053960 max=0.063165 Jy/beam ! Clean residual mean=-0.000038 rms=0.018774 Jy/beam ! Combined flux in latest and established models = 0.0842007 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 66 model components to the UV plane model. ! The established model now contains 66 components and 0.0842007 Jy ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.839 mas, bpa=-5.002 degrees ! Estimated noise=1089.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167235 Jy ! Component: 100 - total flux cleaned = 0.025774 Jy ! Component: 150 - total flux cleaned = 0.0309403 Jy ! Component: 200 - total flux cleaned = 0.0348218 Jy ! Total flux subtracted in 200 components = 0.0348218 Jy ! Clean residual min=-0.019664 max=0.024515 Jy/beam ! Clean residual mean=-0.000141 rms=0.006539 Jy/beam ! Combined flux in latest and established models = 0.119023 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 111 components and 0.119023 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=14 mas, bpa=6.978 degrees ! Estimated noise=1337.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00874542 Jy ! Component: 100 - total flux cleaned = 0.0102464 Jy ! Component: 150 - total flux cleaned = 0.0106901 Jy ! Component: 200 - total flux cleaned = 0.0102942 Jy ! Total flux subtracted in 200 components = 0.0102942 Jy ! Clean residual min=-0.011914 max=0.011242 Jy/beam ! Clean residual mean=-0.000364 rms=0.003695 Jy/beam ! Combined flux in latest and established models = 0.129317 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 152 components and 0.129317 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.839 mas, bpa=-5.002 degrees ! Estimated noise=1089.37 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0030249 Jy ! Component: 100 - total flux cleaned = -0.00295872 Jy ! Component: 150 - total flux cleaned = -0.0037603 Jy ! Component: 200 - total flux cleaned = -0.00374715 Jy ! Total flux subtracted in 200 components = -0.00374715 Jy ! Clean residual min=-0.018670 max=0.021022 Jy/beam ! Clean residual mean=-0.000195 rms=0.006006 Jy/beam ! Combined flux in latest and established models = 0.12557 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 58 model components to the UV plane model. ! The established model now contains 184 components and 0.12557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.856044Jy sigma=0.005475 ! Fit after self-cal, rms=1.855731Jy sigma=0.005474 wmodel J0408-0529_S_1997_05_07_yyk\_map.mod ! Writing 184 model components to file: J0408-0529_S_1997_05_07_yyk_map.mod wobs J0408-0529_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J0408-0529_S_1997_05_07_yyk_uvs.fits wwins J0408-0529_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J0408-0529_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000439855 Jy ! Component: 100 - total flux cleaned = -0.000106424 Jy ! Component: 150 - total flux cleaned = -0.000418784 Jy ! Component: 200 - total flux cleaned = -0.00134002 Jy ! Component: 250 - total flux cleaned = -0.002233 Jy ! Component: 300 - total flux cleaned = -0.00252208 Jy ! Component: 350 - total flux cleaned = -0.00338128 Jy ! Component: 400 - total flux cleaned = -0.0036637 Jy ! Component: 450 - total flux cleaned = -0.00421851 Jy ! Component: 500 - total flux cleaned = -0.00421747 Jy ! Component: 550 - total flux cleaned = -0.00476282 Jy ! Component: 600 - total flux cleaned = -0.00503299 Jy ! Component: 650 - total flux cleaned = -0.00583666 Jy ! Component: 700 - total flux cleaned = -0.00609933 Jy ! Component: 750 - total flux cleaned = -0.00583608 Jy ! Component: 800 - total flux cleaned = -0.00662219 Jy ! Component: 850 - total flux cleaned = -0.00714008 Jy ! Component: 900 - total flux cleaned = -0.00713875 Jy ! Component: 950 - total flux cleaned = -0.00765352 Jy ! Component: 1000 - total flux cleaned = -0.00765074 Jy ! Component: 1050 - total flux cleaned = -0.00815704 Jy ! Component: 1100 - total flux cleaned = -0.00840926 Jy ! Component: 1150 - total flux cleaned = -0.00840774 Jy ! Component: 1200 - total flux cleaned = -0.00890509 Jy ! Component: 1250 - total flux cleaned = -0.00890582 Jy ! Component: 1300 - total flux cleaned = -0.00915241 Jy ! Component: 1350 - total flux cleaned = -0.00890707 Jy ! Component: 1400 - total flux cleaned = -0.00915177 Jy ! Component: 1450 - total flux cleaned = -0.00939516 Jy ! Component: 1500 - total flux cleaned = -0.00939715 Jy ! Component: 1550 - total flux cleaned = -0.00963852 Jy ! Component: 1600 - total flux cleaned = -0.00963871 Jy ! Component: 1650 - total flux cleaned = -0.00987772 Jy ! Component: 1700 - total flux cleaned = -0.0101163 Jy ! Component: 1750 - total flux cleaned = -0.0105912 Jy ! Component: 1800 - total flux cleaned = -0.0108262 Jy ! Component: 1850 - total flux cleaned = -0.0103559 Jy ! Component: 1900 - total flux cleaned = -0.0110597 Jy ! Component: 1950 - total flux cleaned = -0.0112929 Jy ! Component: 2000 - total flux cleaned = -0.0112944 Jy ! Total flux subtracted in 2048 components = -0.0115251 Jy ! Clean residual min=-0.014402 max=0.014561 Jy/beam ! Clean residual mean=-0.000162 rms=0.005337 Jy/beam ! Combined flux in latest and established models = 0.114044 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 327 components and 0.114044 Jy ![Exited script file: muppet] wmap "J0408-0529_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 8.839 at -5.002 degrees (North through East) ! Clean map min=-0.026645 max=0.060237 Jy/beam ! Writing clean map to FITS file: J0408-0529_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0602367 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00533026 device "J0408-0529_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J0408-0529_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -26.5465 26.5465 53.0931 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0159 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 8.839 at -5.002 degrees (North through East) ! Clean map min=-0.026645 max=0.060237 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0408-0529_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J0408-0529_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0408-0529_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 16:12:05 2007