! Started logfile: J0359-2615_X_1997_08_27_yyk_uvs.log on Mon Jan 8 02:52:18 2007 obs J0359-2615_X_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J0359-2615_X_1997_08_27_yyk_uva.fits ! AN table 1: 140 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.727778 visibilities/baseline/integration-bin. ! Found source: J0359-2615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 18340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0359-2615_X_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.311419 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.705 mas, bmaj=1.735 mas, bpa=-10.37 degrees ! Estimated noise=1244.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -0.6). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483556 Jy ! Component: 100 - total flux cleaned = 0.072864 Jy ! Total flux subtracted in 100 components = 0.072864 Jy ! Clean residual min=-0.010834 max=0.017774 Jy/beam ! Clean residual mean=-0.000116 rms=0.003221 Jy/beam ! Combined flux in latest and established models = 0.072864 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.072864 Jy ! ! Correcting IF 1. ! A total of 253 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 323 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 253 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.302454Jy sigma=0.001681 ! Fit after self-cal, rms=0.302026Jy sigma=0.001678 ! Inverting map and beam ! Estimated beam: bmin=0.705 mas, bmaj=1.735 mas, bpa=-10.37 degrees ! Estimated noise=1244.22 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8699 mas, bmaj=2.176 mas, bpa=-10.11 degrees ! Estimated noise=878.914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0370992 Jy ! Component: 100 - total flux cleaned = 0.0525576 Jy ! Component: 150 - total flux cleaned = 0.0588969 Jy ! Component: 200 - total flux cleaned = 0.0599256 Jy ! Total flux subtracted in 200 components = 0.0599256 Jy ! Clean residual min=-0.011760 max=0.019396 Jy/beam ! Clean residual mean=-0.000165 rms=0.003880 Jy/beam ! Combined flux in latest and established models = 0.13279 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.13279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299727Jy sigma=0.001659 ! Fit after self-cal, rms=0.299671Jy sigma=0.001658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8699 x 2.176 at -10.11 degrees (North through East) ! Clean map min=-0.011344 max=0.047515 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.299671Jy sigma=0.001658 ! Fit after self-cal, rms=0.299671Jy sigma=0.001658 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299671Jy sigma=0.001658 ! Fit after self-cal, rms=0.299672Jy sigma=0.001658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8699 mas, bmaj=2.176 mas, bpa=-10.11 degrees ! Estimated noise=878.914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549131 Jy ! Component: 100 - total flux cleaned = 0.00138657 Jy ! Component: 150 - total flux cleaned = 0.00196387 Jy ! Component: 200 - total flux cleaned = 0.00247703 Jy ! Total flux subtracted in 200 components = 0.00247703 Jy ! Clean residual min=-0.011560 max=0.017620 Jy/beam ! Clean residual mean=-0.000156 rms=0.003790 Jy/beam ! Combined flux in latest and established models = 0.135267 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.135267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299543Jy sigma=0.001658 ! Fit after self-cal, rms=0.299531Jy sigma=0.001658 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299531Jy sigma=0.001658 ! Fit after self-cal, rms=0.298401Jy sigma=0.001651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407972 Jy ! Component: 100 - total flux cleaned = 0.00451151 Jy ! Component: 150 - total flux cleaned = 0.00486937 Jy ! Component: 200 - total flux cleaned = 0.00528336 Jy ! Total flux subtracted in 200 components = 0.00528336 Jy ! Clean residual min=-0.010921 max=0.015935 Jy/beam ! Clean residual mean=-0.000139 rms=0.003576 Jy/beam ! Combined flux in latest and established models = 0.14055 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.14055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298292Jy sigma=0.001651 ! Fit after self-cal, rms=0.298070Jy sigma=0.001649 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8699 x 2.176 at -10.11 degrees (North through East) ! Clean map min=-0.010129 max=0.049763 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.352 mas, bmaj=5.321 mas, bpa=-3.394 degrees ! Estimated noise=1144.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00735663 Jy ! Component: 100 - total flux cleaned = 0.00776103 Jy ! Component: 150 - total flux cleaned = 0.00811989 Jy ! Component: 200 - total flux cleaned = 0.00830313 Jy ! Total flux subtracted in 200 components = 0.00830313 Jy ! Clean residual min=-0.014810 max=0.019940 Jy/beam ! Clean residual mean=-0.000237 rms=0.005946 Jy/beam ! Combined flux in latest and established models = 0.148853 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 0.148853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298099Jy sigma=0.001649 ! Fit after self-cal, rms=0.297910Jy sigma=0.001649 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.705 mas, bmaj=1.735 mas, bpa=-10.37 degrees ! Estimated noise=1244.22 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.056332 Jy ! Component: 100 - total flux cleaned = 0.0831382 Jy ! Component: 150 - total flux cleaned = 0.0993747 Jy ! Component: 200 - total flux cleaned = 0.109711 Jy ! Total flux subtracted in 200 components = 0.109711 Jy ! Clean residual min=-0.009658 max=0.012719 Jy/beam ! Clean residual mean=-0.000071 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 0.109711 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.109711 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8699 mas, bmaj=2.176 mas, bpa=-10.11 degrees ! Estimated noise=878.914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247005 Jy ! Component: 100 - total flux cleaned = 0.03769 Jy ! Component: 150 - total flux cleaned = 0.0453437 Jy ! Component: 200 - total flux cleaned = 0.0500026 Jy ! Total flux subtracted in 200 components = 0.0500026 Jy ! Clean residual min=-0.009080 max=0.012809 Jy/beam ! Clean residual mean=-0.000084 rms=0.002975 Jy/beam ! Combined flux in latest and established models = 0.159714 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 65 components and 0.159714 Jy ! Inverting map ! Added new window around map position (2, -1.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134899 Jy ! Component: 100 - total flux cleaned = 0.0164808 Jy ! Component: 150 - total flux cleaned = 0.0179776 Jy ! Component: 200 - total flux cleaned = 0.0191643 Jy ! Total flux subtracted in 200 components = 0.0191643 Jy ! Clean residual min=-0.007637 max=0.010530 Jy/beam ! Clean residual mean=-0.000034 rms=0.002593 Jy/beam ! Combined flux in latest and established models = 0.178878 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 107 components and 0.178878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.352 mas, bmaj=5.321 mas, bpa=-3.394 degrees ! Estimated noise=1144.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.002719 Jy ! Component: 100 - total flux cleaned = 0.00328312 Jy ! Component: 150 - total flux cleaned = 0.00357467 Jy ! Component: 200 - total flux cleaned = 0.00384548 Jy ! Total flux subtracted in 200 components = 0.00384548 Jy ! Clean residual min=-0.012933 max=0.016473 Jy/beam ! Clean residual mean=-0.000058 rms=0.004630 Jy/beam ! Combined flux in latest and established models = 0.182724 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 114 components and 0.182724 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8699 mas, bmaj=2.176 mas, bpa=-10.11 degrees ! Estimated noise=878.914 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000582386 Jy ! Component: 100 - total flux cleaned = -0.000124491 Jy ! Component: 150 - total flux cleaned = 0.000179023 Jy ! Component: 200 - total flux cleaned = 0.000449151 Jy ! Total flux subtracted in 200 components = 0.000449151 Jy ! Clean residual min=-0.007329 max=0.010287 Jy/beam ! Clean residual mean=-0.000027 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 0.183173 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 128 components and 0.183173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296797Jy sigma=0.001641 ! Fit after self-cal, rms=0.296654Jy sigma=0.001640 wmodel J0359-2615_X_1997_08_27_yyk\_map.mod ! Writing 128 model components to file: J0359-2615_X_1997_08_27_yyk_map.mod wobs J0359-2615_X_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J0359-2615_X_1997_08_27_yyk_uvs.fits wwins J0359-2615_X_1997_08_27_yyk\_map.win ! wwins: Wrote 3 windows to J0359-2615_X_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453948 Jy ! Component: 100 - total flux cleaned = 0.00830644 Jy ! Component: 150 - total flux cleaned = 0.0100856 Jy ! Component: 200 - total flux cleaned = 0.0116104 Jy ! Component: 250 - total flux cleaned = 0.0126939 Jy ! Component: 300 - total flux cleaned = 0.0134965 Jy ! Component: 350 - total flux cleaned = 0.014157 Jy ! Component: 400 - total flux cleaned = 0.0144737 Jy ! Component: 450 - total flux cleaned = 0.0143733 Jy ! Component: 500 - total flux cleaned = 0.0144727 Jy ! Component: 550 - total flux cleaned = 0.0144725 Jy ! Component: 600 - total flux cleaned = 0.0144718 Jy ! Component: 650 - total flux cleaned = 0.0145607 Jy ! Component: 700 - total flux cleaned = 0.0145606 Jy ! Component: 750 - total flux cleaned = 0.0143062 Jy ! Component: 800 - total flux cleaned = 0.0140594 Jy ! Component: 850 - total flux cleaned = 0.0140598 Jy ! Component: 900 - total flux cleaned = 0.013902 Jy ! Component: 950 - total flux cleaned = 0.013519 Jy ! Component: 1000 - total flux cleaned = 0.0132199 Jy ! Component: 1050 - total flux cleaned = 0.013001 Jy ! Component: 1100 - total flux cleaned = 0.0127872 Jy ! Component: 1150 - total flux cleaned = 0.0126475 Jy ! Component: 1200 - total flux cleaned = 0.0123021 Jy ! Component: 1250 - total flux cleaned = 0.0119635 Jy ! Component: 1300 - total flux cleaned = 0.0116309 Jy ! Component: 1350 - total flux cleaned = 0.0113028 Jy ! Component: 1400 - total flux cleaned = 0.0109168 Jy ! Component: 1450 - total flux cleaned = 0.0105386 Jy ! Component: 1500 - total flux cleaned = 0.0103526 Jy ! Component: 1550 - total flux cleaned = 0.0102289 Jy ! Component: 1600 - total flux cleaned = 0.00986877 Jy ! Component: 1650 - total flux cleaned = 0.00980982 Jy ! Component: 1700 - total flux cleaned = 0.00957532 Jy ! Component: 1750 - total flux cleaned = 0.00917111 Jy ! Component: 1800 - total flux cleaned = 0.00888692 Jy ! Component: 1850 - total flux cleaned = 0.00860501 Jy ! Component: 1900 - total flux cleaned = 0.00827277 Jy ! Component: 1950 - total flux cleaned = 0.00821756 Jy ! Component: 2000 - total flux cleaned = 0.00794586 Jy ! Total flux subtracted in 2048 components = 0.00757092 Jy ! Clean residual min=-0.003630 max=0.002911 Jy/beam ! Clean residual mean=-0.000025 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.190744 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 270 components and 0.190744 Jy ![Exited script file: muppet] wmap "J0359-2615_X_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8699 x 2.176 at -10.11 degrees (North through East) ! Clean map min=-0.0054035 max=0.046409 Jy/beam ! Writing clean map to FITS file: J0359-2615_X_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0464086 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00108305 device "J0359-2615_X_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0359-2615_X_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.00118 7.00118 14.0024 28.0047 56.0094 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.046 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8699 x 2.176 at -10.11 degrees (North through East) ! Clean map min=-0.0054035 max=0.046409 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0359-2615_X_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0359-2615_X_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0359-2615_X_1997_08_27_yyk_uvs.log closed on Mon Jan 8 02:52:26 2007