! Started logfile: J0348-1610_S_1997_07_02_yyk_uvs.log on Sun Jan 7 16:07:28 2007 obs J0348-1610_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0348-1610_S_1997_07_02_yyk_uva.fits ! AN table 1: 136 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.19869 visibilities/baseline/integration-bin. ! Found source: J0348-1610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 29344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0348-1610_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.594378 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.431 mas, bpa=-1.519 degrees ! Estimated noise=1942.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.422896 Jy ! Component: 100 - total flux cleaned = 0.502976 Jy ! Total flux subtracted in 100 components = 0.502976 Jy ! Clean residual min=-0.014836 max=0.026335 Jy/beam ! Clean residual mean=0.000193 rms=0.005682 Jy/beam ! Combined flux in latest and established models = 0.502976 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.502976 Jy ! ! Correcting IF 1. ! A total of 244 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.315463Jy sigma=0.001474 ! Fit after self-cal, rms=0.315094Jy sigma=0.001472 ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.431 mas, bpa=-1.519 degrees ! Estimated noise=1942.43 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.911 mas, bmaj=10.46 mas, bpa=-3.046 degrees ! Estimated noise=1023.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325579 Jy ! Component: 100 - total flux cleaned = 0.0377463 Jy ! Component: 150 - total flux cleaned = 0.0390402 Jy ! Component: 200 - total flux cleaned = 0.0397934 Jy ! Total flux subtracted in 200 components = 0.0397934 Jy ! Clean residual min=-0.012828 max=0.019021 Jy/beam ! Clean residual mean=0.000011 rms=0.004925 Jy/beam ! Combined flux in latest and established models = 0.542769 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.542769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312106Jy sigma=0.001460 ! Fit after self-cal, rms=0.312060Jy sigma=0.001460 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.911 x 10.46 at -3.046 degrees (North through East) ! Clean map min=-0.012606 max=0.49626 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02339 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.11 HN 0.93 KP 0.92 ! LA 0.98 MK 0.98 NL 1.00* OV 1.10 ! PT 0.96 SC 0.83 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.973393 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.16 HN 1.00 KP 0.96 ! LA 1.09 MK 1.09 NL 0.99 OV 1.07 ! PT 0.95 SC 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04264 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 0.93 KP 0.92 ! LA 0.82 MK 0.88 NL 0.96 OV 0.97 ! PT 1.09 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00015 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.12 HN 1.16 KP 0.95 ! LA 0.87 MK 1.00 NL 1.06 OV 0.95 ! PT 0.91 SC 1.01 ! ! ! Fit before self-cal, rms=0.312060Jy sigma=0.001460 ! Fit after self-cal, rms=0.301921Jy sigma=0.001437 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301921Jy sigma=0.001437 ! Fit after self-cal, rms=0.301918Jy sigma=0.001437 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=10.27 mas, bpa=-2.065 degrees ! Estimated noise=1025.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.5, -6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202555 Jy ! Component: 100 - total flux cleaned = 0.0272664 Jy ! Component: 150 - total flux cleaned = 0.0301269 Jy ! Component: 200 - total flux cleaned = 0.0317385 Jy ! Total flux subtracted in 200 components = 0.0317385 Jy ! Clean residual min=-0.008484 max=0.009677 Jy/beam ! Clean residual mean=-0.000075 rms=0.002523 Jy/beam ! Combined flux in latest and established models = 0.574507 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.574508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300984Jy sigma=0.001432 ! Fit after self-cal, rms=0.300927Jy sigma=0.001431 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300927Jy sigma=0.001431 ! Fit after self-cal, rms=0.299321Jy sigma=0.001423 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340912 Jy ! Component: 100 - total flux cleaned = 0.00374427 Jy ! Component: 150 - total flux cleaned = 0.00374761 Jy ! Component: 200 - total flux cleaned = 0.00388775 Jy ! Total flux subtracted in 200 components = 0.00388775 Jy ! Clean residual min=-0.007570 max=0.009086 Jy/beam ! Clean residual mean=-0.000075 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 0.578395 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 60 components and 0.578395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299170Jy sigma=0.001422 ! Fit after self-cal, rms=0.298946Jy sigma=0.001421 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.869 x 10.27 at -2.065 degrees (North through East) ! Clean map min=-0.0073441 max=0.49948 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298946Jy sigma=0.001421 ! Fit after self-cal, rms=0.295019Jy sigma=0.001413 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295019Jy sigma=0.001413 ! Fit after self-cal, rms=0.294974Jy sigma=0.001413 ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=10.27 mas, bpa=-2.297 degrees ! Estimated noise=1019.58 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398632 Jy ! Component: 100 - total flux cleaned = 0.00464567 Jy ! Component: 150 - total flux cleaned = 0.00498261 Jy ! Component: 200 - total flux cleaned = 0.00518878 Jy ! Total flux subtracted in 200 components = 0.00518878 Jy ! Clean residual min=-0.005783 max=0.007582 Jy/beam ! Clean residual mean=0.000008 rms=0.002076 Jy/beam ! Combined flux in latest and established models = 0.583584 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 82 components and 0.583584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294869Jy sigma=0.001412 ! Fit after self-cal, rms=0.294848Jy sigma=0.001412 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294848Jy sigma=0.001412 ! Fit after self-cal, rms=0.294944Jy sigma=0.001410 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294944Jy sigma=0.001410 ! Fit after self-cal, rms=0.294941Jy sigma=0.001410 ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=10.26 mas, bpa=-2.295 degrees ! Estimated noise=1019.56 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233476 Jy ! Component: 100 - total flux cleaned = 0.00243965 Jy ! Component: 150 - total flux cleaned = 0.00253453 Jy ! Component: 200 - total flux cleaned = 0.00262687 Jy ! Total flux subtracted in 200 components = 0.00262687 Jy ! Clean residual min=-0.005660 max=0.006886 Jy/beam ! Clean residual mean=0.000022 rms=0.002031 Jy/beam ! Combined flux in latest and established models = 0.586211 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 0.586211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294883Jy sigma=0.001410 ! Fit after self-cal, rms=0.294877Jy sigma=0.001410 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.576 mas, bmaj=16.74 mas, bpa=-4.561 degrees ! Estimated noise=1227.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132222 Jy ! Component: 100 - total flux cleaned = 0.00120008 Jy ! Component: 150 - total flux cleaned = 0.00101022 Jy ! Component: 200 - total flux cleaned = 0.000934666 Jy ! Total flux subtracted in 200 components = 0.000934666 Jy ! Clean residual min=-0.005521 max=0.008871 Jy/beam ! Clean residual mean=0.000037 rms=0.002795 Jy/beam ! Combined flux in latest and established models = 0.587146 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.587146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294869Jy sigma=0.001410 ! Fit after self-cal, rms=0.294837Jy sigma=0.001410 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=8.368 mas, bpa=-1.033 degrees ! Estimated noise=1929.96 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.421356 Jy ! Component: 100 - total flux cleaned = 0.506062 Jy ! Component: 150 - total flux cleaned = 0.539832 Jy ! Component: 200 - total flux cleaned = 0.559481 Jy ! Total flux subtracted in 200 components = 0.559481 Jy ! Clean residual min=-0.008610 max=0.019266 Jy/beam ! Clean residual mean=0.000076 rms=0.002923 Jy/beam ! Combined flux in latest and established models = 0.559482 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.559482 Jy ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=10.26 mas, bpa=-2.295 degrees ! Estimated noise=1019.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185506 Jy ! Component: 100 - total flux cleaned = 0.0256543 Jy ! Component: 150 - total flux cleaned = 0.0276723 Jy ! Component: 200 - total flux cleaned = 0.0284983 Jy ! Total flux subtracted in 200 components = 0.0284983 Jy ! Clean residual min=-0.005849 max=0.006818 Jy/beam ! Clean residual mean=0.000013 rms=0.002055 Jy/beam ! Combined flux in latest and established models = 0.58798 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 56 components and 0.58798 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.576 mas, bmaj=16.74 mas, bpa=-4.561 degrees ! Estimated noise=1227.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130465 Jy ! Component: 100 - total flux cleaned = 0.00118636 Jy ! Component: 150 - total flux cleaned = 0.00095398 Jy ! Component: 200 - total flux cleaned = 0.000956804 Jy ! Total flux subtracted in 200 components = 0.000956804 Jy ! Clean residual min=-0.006025 max=0.008289 Jy/beam ! Clean residual mean=0.000040 rms=0.002695 Jy/beam ! Combined flux in latest and established models = 0.588937 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 72 components and 0.588937 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=10.26 mas, bpa=-2.295 degrees ! Estimated noise=1019.56 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766801 Jy ! Component: 100 - total flux cleaned = 0.00104024 Jy ! Component: 150 - total flux cleaned = 0.00116089 Jy ! Component: 200 - total flux cleaned = 0.00104543 Jy ! Total flux subtracted in 200 components = 0.00104543 Jy ! Clean residual min=-0.005170 max=0.006694 Jy/beam ! Clean residual mean=0.000023 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.589982 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 0.589982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294712Jy sigma=0.001410 ! Fit after self-cal, rms=0.294666Jy sigma=0.001409 wmodel J0348-1610_S_1997_07_02_yyk\_map.mod ! Writing 94 model components to file: J0348-1610_S_1997_07_02_yyk_map.mod wobs J0348-1610_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0348-1610_S_1997_07_02_yyk_uvs.fits wwins J0348-1610_S_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J0348-1610_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286017 Jy ! Component: 100 - total flux cleaned = 0.00442493 Jy ! Component: 150 - total flux cleaned = 0.00487457 Jy ! Component: 200 - total flux cleaned = 0.00512377 Jy ! Component: 250 - total flux cleaned = 0.00512457 Jy ! Component: 300 - total flux cleaned = 0.00520241 Jy ! Component: 350 - total flux cleaned = 0.00505509 Jy ! Component: 400 - total flux cleaned = 0.00491574 Jy ! Component: 450 - total flux cleaned = 0.00491354 Jy ! Component: 500 - total flux cleaned = 0.00504329 Jy ! Component: 550 - total flux cleaned = 0.00516981 Jy ! Component: 600 - total flux cleaned = 0.00529097 Jy ! Component: 650 - total flux cleaned = 0.00534982 Jy ! Component: 700 - total flux cleaned = 0.00529307 Jy ! Component: 750 - total flux cleaned = 0.00529332 Jy ! Component: 800 - total flux cleaned = 0.00523919 Jy ! Component: 850 - total flux cleaned = 0.00523925 Jy ! Component: 900 - total flux cleaned = 0.00523962 Jy ! Component: 950 - total flux cleaned = 0.00534024 Jy ! Component: 1000 - total flux cleaned = 0.00534014 Jy ! Component: 1050 - total flux cleaned = 0.00529259 Jy ! Component: 1100 - total flux cleaned = 0.00543691 Jy ! Component: 1150 - total flux cleaned = 0.00538951 Jy ! Component: 1200 - total flux cleaned = 0.00520615 Jy ! Component: 1250 - total flux cleaned = 0.00516006 Jy ! Component: 1300 - total flux cleaned = 0.00493878 Jy ! Component: 1350 - total flux cleaned = 0.00476357 Jy ! Component: 1400 - total flux cleaned = 0.00450646 Jy ! Component: 1450 - total flux cleaned = 0.00438079 Jy ! Component: 1500 - total flux cleaned = 0.00434003 Jy ! Component: 1550 - total flux cleaned = 0.00421724 Jy ! Component: 1600 - total flux cleaned = 0.00413644 Jy ! Component: 1650 - total flux cleaned = 0.00397804 Jy ! Component: 1700 - total flux cleaned = 0.00370609 Jy ! Component: 1750 - total flux cleaned = 0.00385948 Jy ! Component: 1800 - total flux cleaned = 0.00374625 Jy ! Component: 1850 - total flux cleaned = 0.00367156 Jy ! Component: 1900 - total flux cleaned = 0.00367149 Jy ! Component: 1950 - total flux cleaned = 0.00359892 Jy ! Component: 2000 - total flux cleaned = 0.00356341 Jy ! Total flux subtracted in 2048 components = 0.00342158 Jy ! Clean residual min=-0.002103 max=0.002856 Jy/beam ! Clean residual mean=-0.000025 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.593404 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 246 components and 0.593404 Jy ![Exited script file: muppet] wmap "J0348-1610_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.837 x 10.26 at -2.295 degrees (North through East) ! Clean map min=-0.0037233 max=0.49385 Jy/beam ! Writing clean map to FITS file: J0348-1610_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.493846 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000782779 device "J0348-1610_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0348-1610_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.47552 0.47552 0.95104 1.90208 3.80416 7.60832 15.2166 30.4333 60.8666 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.493 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.837 x 10.26 at -2.295 degrees (North through East) ! Clean map min=-0.0037233 max=0.49385 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0348-1610_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0348-1610_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0348-1610_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 16:07:35 2007