! Started logfile: J0343-2530_X_1997_07_02_yyk_uvs.log on Mon Jan 8 02:47:12 2007 obs J0343-2530_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J0343-2530_X_1997_07_02_yyk_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.21064 visibilities/baseline/integration-bin. ! Found source: J0343-2530 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 30944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0343-2530_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.273871 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.74 mas, bmaj=2.248 mas, bpa=-1.508 degrees ! Estimated noise=1092.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.111199 Jy ! Component: 100 - total flux cleaned = 0.126682 Jy ! Total flux subtracted in 100 components = 0.126682 Jy ! Clean residual min=-0.007395 max=0.009743 Jy/beam ! Clean residual mean=-0.000064 rms=0.002068 Jy/beam ! Combined flux in latest and established models = 0.126682 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.126682 Jy ! ! Correcting IF 1. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.241657Jy sigma=0.001485 ! Fit after self-cal, rms=0.241262Jy sigma=0.001484 ! Inverting map and beam ! Estimated beam: bmin=0.74 mas, bmaj=2.248 mas, bpa=-1.508 degrees ! Estimated noise=1092.77 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9767 mas, bmaj=2.862 mas, bpa=-2.982 degrees ! Estimated noise=671.987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013977 Jy ! Component: 100 - total flux cleaned = 0.0203085 Jy ! Component: 150 - total flux cleaned = 0.0223847 Jy ! Component: 200 - total flux cleaned = 0.023008 Jy ! Total flux subtracted in 200 components = 0.023008 Jy ! Clean residual min=-0.003959 max=0.005355 Jy/beam ! Clean residual mean=-0.000038 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.14969 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.14969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240899Jy sigma=0.001479 ! Fit after self-cal, rms=0.240864Jy sigma=0.001479 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9767 x 2.862 at -2.982 degrees (North through East) ! Clean map min=-0.0037136 max=0.12991 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.993738 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 0.98 KP 1.04 ! LA 1.01 MK 1.03 NL 1.04 OV 1.01 ! PT 0.91 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01163 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 0.99 KP 0.97 ! LA 0.96 MK 0.97 NL 1.01 OV 1.00 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.985686 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.08 HN 1.00 KP 0.96 ! LA 1.03 MK 1.00 NL 1.01 OV 0.99 ! PT 0.92 SC 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.98402 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 0.98 KP 0.99 ! LA 0.98 MK 0.99 NL 1.10 OV 1.05 ! PT 0.96 SC 1.05 ! ! ! Fit before self-cal, rms=0.240864Jy sigma=0.001479 ! Fit after self-cal, rms=0.246716Jy sigma=0.001478 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246716Jy sigma=0.001478 ! Fit after self-cal, rms=0.246724Jy sigma=0.001478 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9813 mas, bmaj=2.909 mas, bpa=-3.287 degrees ! Estimated noise=658.943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211829 Jy ! Component: 100 - total flux cleaned = -0.00235641 Jy ! Component: 150 - total flux cleaned = -0.002554 Jy ! Component: 200 - total flux cleaned = -0.00261645 Jy ! Total flux subtracted in 200 components = -0.00261645 Jy ! Clean residual min=-0.003406 max=0.004373 Jy/beam ! Clean residual mean=-0.000016 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.147073 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.147073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246630Jy sigma=0.001477 ! Fit after self-cal, rms=0.246624Jy sigma=0.001477 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246624Jy sigma=0.001477 ! Fit after self-cal, rms=0.244248Jy sigma=0.001460 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000993766 Jy ! Component: 100 - total flux cleaned = 0.000765817 Jy ! Component: 150 - total flux cleaned = 0.000642123 Jy ! Component: 200 - total flux cleaned = 0.000486286 Jy ! Total flux subtracted in 200 components = 0.000486286 Jy ! Clean residual min=-0.003087 max=0.004352 Jy/beam ! Clean residual mean=-0.000017 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.14756 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.14756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244245Jy sigma=0.001460 ! Fit after self-cal, rms=0.243820Jy sigma=0.001457 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9813 x 2.909 at -3.287 degrees (North through East) ! Clean map min=-0.0037475 max=0.13358 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243820Jy sigma=0.001457 ! Fit after self-cal, rms=0.243049Jy sigma=0.001456 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243049Jy sigma=0.001456 ! Fit after self-cal, rms=0.242972Jy sigma=0.001456 ! Inverting map and beam ! Estimated beam: bmin=0.9916 mas, bmaj=2.892 mas, bpa=-2.977 degrees ! Estimated noise=653.659 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000876716 Jy ! Component: 100 - total flux cleaned = -0.000937098 Jy ! Component: 150 - total flux cleaned = -0.000987368 Jy ! Component: 200 - total flux cleaned = -0.000986817 Jy ! Total flux subtracted in 200 components = -0.000986817 Jy ! Clean residual min=-0.002993 max=0.003413 Jy/beam ! Clean residual mean=-0.000022 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.146573 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.146573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242935Jy sigma=0.001456 ! Fit after self-cal, rms=0.242920Jy sigma=0.001455 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242920Jy sigma=0.001455 ! Fit after self-cal, rms=0.242681Jy sigma=0.001455 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242681Jy sigma=0.001455 ! Fit after self-cal, rms=0.242680Jy sigma=0.001455 ! Inverting map and beam ! Estimated beam: bmin=0.993 mas, bmaj=2.883 mas, bpa=-2.809 degrees ! Estimated noise=648.723 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141084 Jy ! Component: 100 - total flux cleaned = 0.00153332 Jy ! Component: 150 - total flux cleaned = 0.00153394 Jy ! Component: 200 - total flux cleaned = 0.0015061 Jy ! Total flux subtracted in 200 components = 0.0015061 Jy ! Clean residual min=-0.003066 max=0.003418 Jy/beam ! Clean residual mean=-0.000019 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.148079 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 106 components and 0.148079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242660Jy sigma=0.001454 ! Fit after self-cal, rms=0.242660Jy sigma=0.001454 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.301 mas, bmaj=5.419 mas, bpa=-5.504 degrees ! Estimated noise=803.399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209199 Jy ! Component: 100 - total flux cleaned = 0.00032189 Jy ! Component: 150 - total flux cleaned = 0.000361953 Jy ! Component: 200 - total flux cleaned = 0.000361814 Jy ! Total flux subtracted in 200 components = 0.000361814 Jy ! Clean residual min=-0.004043 max=0.004569 Jy/beam ! Clean residual mean=-0.000036 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.148441 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 120 components and 0.148441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242648Jy sigma=0.001454 ! Fit after self-cal, rms=0.242648Jy sigma=0.001454 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7474 mas, bmaj=2.251 mas, bpa=-1.437 degrees ! Estimated noise=1068.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.113743 Jy ! Component: 100 - total flux cleaned = 0.130875 Jy ! Component: 150 - total flux cleaned = 0.137901 Jy ! Component: 200 - total flux cleaned = 0.140143 Jy ! Total flux subtracted in 200 components = 0.140143 Jy ! Clean residual min=-0.005173 max=0.005248 Jy/beam ! Clean residual mean=-0.000036 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.140143 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.140143 Jy ! Inverting map and beam ! Estimated beam: bmin=0.993 mas, bmaj=2.883 mas, bpa=-2.809 degrees ! Estimated noise=648.723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00639727 Jy ! Component: 100 - total flux cleaned = 0.00779116 Jy ! Component: 150 - total flux cleaned = 0.00808358 Jy ! Component: 200 - total flux cleaned = 0.00808193 Jy ! Total flux subtracted in 200 components = 0.00808193 Jy ! Clean residual min=-0.003393 max=0.003619 Jy/beam ! Clean residual mean=-0.000022 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.148225 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 47 components and 0.148225 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.301 mas, bmaj=5.419 mas, bpa=-5.504 degrees ! Estimated noise=803.399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482862 Jy ! Component: 100 - total flux cleaned = 0.000564013 Jy ! Component: 150 - total flux cleaned = 0.00056337 Jy ! Component: 200 - total flux cleaned = 0.000531066 Jy ! Total flux subtracted in 200 components = 0.000531066 Jy ! Clean residual min=-0.004208 max=0.004775 Jy/beam ! Clean residual mean=-0.000034 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.148756 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.148756 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.993 mas, bmaj=2.883 mas, bpa=-2.809 degrees ! Estimated noise=648.723 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035186 Jy ! Component: 100 - total flux cleaned = -0.000348851 Jy ! Component: 150 - total flux cleaned = -0.00037905 Jy ! Component: 200 - total flux cleaned = -0.000405075 Jy ! Total flux subtracted in 200 components = -0.000405075 Jy ! Clean residual min=-0.003146 max=0.003622 Jy/beam ! Clean residual mean=-0.000019 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.148351 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.148351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242644Jy sigma=0.001454 ! Fit after self-cal, rms=0.242643Jy sigma=0.001454 wmodel J0343-2530_X_1997_07_02_yyk\_map.mod ! Writing 80 model components to file: J0343-2530_X_1997_07_02_yyk_map.mod wobs J0343-2530_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J0343-2530_X_1997_07_02_yyk_uvs.fits wwins J0343-2530_X_1997_07_02_yyk\_map.win ! wwins: Wrote 2 windows to J0343-2530_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000836537 Jy ! Component: 100 - total flux cleaned = 0.00089094 Jy ! Component: 150 - total flux cleaned = 0.000889434 Jy ! Component: 200 - total flux cleaned = 0.000936569 Jy ! Component: 250 - total flux cleaned = 0.00111497 Jy ! Component: 300 - total flux cleaned = 0.00111517 Jy ! Component: 350 - total flux cleaned = 0.00119669 Jy ! Component: 400 - total flux cleaned = 0.00115825 Jy ! Component: 450 - total flux cleaned = 0.0012356 Jy ! Component: 500 - total flux cleaned = 0.00116016 Jy ! Component: 550 - total flux cleaned = 0.00105027 Jy ! Component: 600 - total flux cleaned = 0.000979324 Jy ! Component: 650 - total flux cleaned = 0.00094538 Jy ! Component: 700 - total flux cleaned = 0.00101301 Jy ! Component: 750 - total flux cleaned = 0.00114503 Jy ! Component: 800 - total flux cleaned = 0.00114575 Jy ! Component: 850 - total flux cleaned = 0.00133818 Jy ! Component: 900 - total flux cleaned = 0.00140124 Jy ! Component: 950 - total flux cleaned = 0.00149413 Jy ! Component: 1000 - total flux cleaned = 0.00164624 Jy ! Component: 1050 - total flux cleaned = 0.00167617 Jy ! Component: 1100 - total flux cleaned = 0.00173521 Jy ! Component: 1150 - total flux cleaned = 0.00185147 Jy ! Component: 1200 - total flux cleaned = 0.0017654 Jy ! Component: 1250 - total flux cleaned = 0.00185011 Jy ! Component: 1300 - total flux cleaned = 0.00182194 Jy ! Component: 1350 - total flux cleaned = 0.00187703 Jy ! Component: 1400 - total flux cleaned = 0.00187723 Jy ! Component: 1450 - total flux cleaned = 0.00193071 Jy ! Component: 1500 - total flux cleaned = 0.00195692 Jy ! Component: 1550 - total flux cleaned = 0.00203581 Jy ! Component: 1600 - total flux cleaned = 0.00203555 Jy ! Component: 1650 - total flux cleaned = 0.00208674 Jy ! Component: 1700 - total flux cleaned = 0.00211223 Jy ! Component: 1750 - total flux cleaned = 0.00213766 Jy ! Component: 1800 - total flux cleaned = 0.00221197 Jy ! Component: 1850 - total flux cleaned = 0.00223639 Jy ! Component: 1900 - total flux cleaned = 0.00218772 Jy ! Component: 1950 - total flux cleaned = 0.00228417 Jy ! Component: 2000 - total flux cleaned = 0.00221267 Jy ! Total flux subtracted in 2048 components = 0.00225982 Jy ! Clean residual min=-0.001298 max=0.001324 Jy/beam ! Clean residual mean=-0.000010 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.15061 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 214 components and 0.15061 Jy ![Exited script file: muppet] wmap "J0343-2530_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.993 x 2.883 at -2.809 degrees (North through East) ! Clean map min=-0.0026479 max=0.13155 Jy/beam ! Writing clean map to FITS file: J0343-2530_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13155 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00048729 device "J0343-2530_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J0343-2530_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11127 1.11127 2.22253 4.44507 8.89014 17.7803 35.5606 71.1211 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.131 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.993 x 2.883 at -2.809 degrees (North through East) ! Clean map min=-0.0026479 max=0.13155 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0343-2530_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J0343-2530_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0343-2530_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 02:47:21 2007