! Started logfile: J0340-2119_S_1997_07_02_yyk_uvs.log on Sun Jan  7 16:05:36 2007
obs J0340-2119_S_1997_07_02_yyk_uva.fits
! Reading UV FITS file: J0340-2119_S_1997_07_02_yyk_uva.fits
! AN table 1: 148 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1.26832 visibilities/baseline/integration-bin.
! Found source: J0340-2119
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22447e+09        8e+06          1        8e+06
!  02        2  2.23447e+09        8e+06          1        8e+06
!  03        3  2.29447e+09        8e+06          1        8e+06
!  04        4  2.32447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 754 lines of history.
! 
! Reading 33788 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0340-2119_S_1997_07_02_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.757337 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.99 mas, bmaj=8.62 mas, bpa=-0.749 degrees
! Estimated noise=1497.69 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.540884 Jy
! Component: 100  -  total flux cleaned = 0.66003 Jy
! Total flux subtracted in 100 components = 0.66003 Jy
! Clean residual min=-0.026261 max=0.058064 Jy/beam
! Clean residual mean=0.000292 rms=0.009165 Jy/beam
! Combined flux in latest and established models = 0.66003 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.66003 Jy
! 
! Correcting IF 1.
!  A total of 250 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 105 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 105 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 105 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.356748Jy  sigma=0.001579
! Fit after  self-cal, rms=0.355604Jy  sigma=0.001574
! Inverting map and beam 
! Estimated beam: bmin=2.99 mas, bmaj=8.62 mas, bpa=-0.749 degrees
! Estimated noise=1497.73 mJy/beam.
! Added new window around map position (-5, -2.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0697524 Jy
! Component: 100  -  total flux cleaned = 0.104247 Jy
! Total flux subtracted in 100 components = 0.104247 Jy
! Clean residual min=-0.020298 max=0.026136 Jy/beam
! Clean residual mean=0.000202 rms=0.006239 Jy/beam
! Combined flux in latest and established models = 0.764277 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 33 components and 0.764277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.342018Jy  sigma=0.001514
! Fit after  self-cal, rms=0.341285Jy  sigma=0.001511
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.9 mas, bmaj=10.97 mas, bpa=-3.239 degrees
! Estimated noise=1011.82 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199218 Jy
! Component: 100  -  total flux cleaned = 0.0204368 Jy
! Component: 150  -  total flux cleaned = 0.0204341 Jy
! Component: 200  -  total flux cleaned = 0.0196986 Jy
! Total flux subtracted in 200 components = 0.0196986 Jy
! Clean residual min=-0.014768 max=0.022099 Jy/beam
! Clean residual mean=0.000372 rms=0.005784 Jy/beam
! Combined flux in latest and established models = 0.783976 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 50 components and 0.783976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.339174Jy  sigma=0.001504
! Fit after  self-cal, rms=0.338992Jy  sigma=0.001504
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.9 x 10.97 at -3.239 degrees (North through East)
! Clean map  min=-0.013561  max=0.64041 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.02489
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        0.89     KP        0.92     
!   LA        1.00     MK        1.02     NL        1.00*    OV        1.10     
!   PT        0.97     SC        0.79     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.985774
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.15     HN        0.98     KP        0.97     
!   LA        1.08     MK        1.05     NL        0.98     OV        1.06     
!   PT        0.95     SC        0.90     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.04918
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.08     HN        0.91     KP        0.93     
!   LA        0.82     MK        0.88     NL        0.93     OV        0.94     
!   PT        1.10     SC        0.98     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.998037
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.11     HN        1.11     KP        0.95     
!   LA        0.90     MK        1.04     NL        1.03     OV        0.95     
!   PT        0.93     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.338992Jy  sigma=0.001504
! Fit after  self-cal, rms=0.323420Jy  sigma=0.001469
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.323420Jy  sigma=0.001469
! Fit after  self-cal, rms=0.323414Jy  sigma=0.001469
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.813 mas, bmaj=10.67 mas, bpa=-2.008 degrees
! Estimated noise=1015.94 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.5, -4.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0267897 Jy
! Component: 100  -  total flux cleaned = 0.0392578 Jy
! Component: 150  -  total flux cleaned = 0.0447277 Jy
! Component: 200  -  total flux cleaned = 0.0464807 Jy
! Total flux subtracted in 200 components = 0.0464807 Jy
! Clean residual min=-0.008321 max=0.012210 Jy/beam
! Clean residual mean=-0.000008 rms=0.003120 Jy/beam
! Combined flux in latest and established models = 0.830457 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 81 components and 0.830457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.321781Jy  sigma=0.001462
! Fit after  self-cal, rms=0.321602Jy  sigma=0.001461
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.321602Jy  sigma=0.001461
! Fit after  self-cal, rms=0.317947Jy  sigma=0.001443
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00729496 Jy
! Component: 100  -  total flux cleaned = 0.00799308 Jy
! Component: 150  -  total flux cleaned = 0.00800323 Jy
! Component: 200  -  total flux cleaned = 0.0081867 Jy
! Total flux subtracted in 200 components = 0.0081867 Jy
! Clean residual min=-0.007146 max=0.010933 Jy/beam
! Clean residual mean=-0.000027 rms=0.002892 Jy/beam
! Combined flux in latest and established models = 0.838643 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 99 components and 0.838643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.317684Jy  sigma=0.001442
! Fit after  self-cal, rms=0.317211Jy  sigma=0.001440
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.813 x 10.67 at -2.008 degrees (North through East)
! Clean map  min=-0.0074269  max=0.64791 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.317211Jy  sigma=0.001440
! Fit after  self-cal, rms=0.310676Jy  sigma=0.001430
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.310676Jy  sigma=0.001430
! Fit after  self-cal, rms=0.310577Jy  sigma=0.001429
! Inverting map and beam 
! Estimated beam: bmin=3.787 mas, bmaj=10.62 mas, bpa=-2.002 degrees
! Estimated noise=1008.22 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00562167 Jy
! Component: 100  -  total flux cleaned = 0.00593902 Jy
! Component: 150  -  total flux cleaned = 0.0061891 Jy
! Component: 200  -  total flux cleaned = 0.00629556 Jy
! Total flux subtracted in 200 components = 0.00629556 Jy
! Clean residual min=-0.006204 max=0.008918 Jy/beam
! Clean residual mean=-0.000052 rms=0.002436 Jy/beam
! Combined flux in latest and established models = 0.844939 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 129 components and 0.844939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.310436Jy  sigma=0.001428
! Fit after  self-cal, rms=0.310392Jy  sigma=0.001428
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.310392Jy  sigma=0.001428
! Fit after  self-cal, rms=0.309708Jy  sigma=0.001426
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309708Jy  sigma=0.001426
! Fit after  self-cal, rms=0.309696Jy  sigma=0.001426
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=10.6 mas, bpa=-1.936 degrees
! Estimated noise=1007.86 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00321298 Jy
! Component: 100  -  total flux cleaned = 0.00341597 Jy
! Component: 150  -  total flux cleaned = 0.00341699 Jy
! Component: 200  -  total flux cleaned = 0.00350165 Jy
! Total flux subtracted in 200 components = 0.00350165 Jy
! Clean residual min=-0.006000 max=0.008466 Jy/beam
! Clean residual mean=-0.000045 rms=0.002360 Jy/beam
! Combined flux in latest and established models = 0.84844 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 147 components and 0.84844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309632Jy  sigma=0.001426
! Fit after  self-cal, rms=0.309621Jy  sigma=0.001426
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.207 mas, bmaj=17.66 mas, bpa=-4.553 degrees
! Estimated noise=1222.48 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139468 Jy
! Component: 100  -  total flux cleaned = 0.00186177 Jy
! Component: 150  -  total flux cleaned = 0.00186762 Jy
! Component: 200  -  total flux cleaned = 0.00194063 Jy
! Total flux subtracted in 200 components = 0.00194063 Jy
! Clean residual min=-0.006713 max=0.011370 Jy/beam
! Clean residual mean=-0.000070 rms=0.003639 Jy/beam
! Combined flux in latest and established models = 0.850381 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 160 components and 0.850381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309618Jy  sigma=0.001426
! Fit after  self-cal, rms=0.309612Jy  sigma=0.001426
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.957 mas, bmaj=8.562 mas, bpa=-0.1043 degrees
! Estimated noise=1476.14 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.537037 Jy
! Component: 100  -  total flux cleaned = 0.672314 Jy
! Component: 150  -  total flux cleaned = 0.738801 Jy
! Component: 200  -  total flux cleaned = 0.775906 Jy
! Total flux subtracted in 200 components = 0.775906 Jy
! Clean residual min=-0.009338 max=0.014379 Jy/beam
! Clean residual mean=0.000037 rms=0.003300 Jy/beam
! Combined flux in latest and established models = 0.775906 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.775906 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=10.6 mas, bpa=-1.936 degrees
! Estimated noise=1007.86 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0354964 Jy
! Component: 100  -  total flux cleaned = 0.0541756 Jy
! Component: 150  -  total flux cleaned = 0.064858 Jy
! Component: 200  -  total flux cleaned = 0.0691619 Jy
! Total flux subtracted in 200 components = 0.0691619 Jy
! Clean residual min=-0.006804 max=0.009421 Jy/beam
! Clean residual mean=-0.000044 rms=0.002628 Jy/beam
! Combined flux in latest and established models = 0.845068 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 77 components and 0.845068 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.207 mas, bmaj=17.66 mas, bpa=-4.553 degrees
! Estimated noise=1222.48 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0070052 Jy
! Component: 100  -  total flux cleaned = 0.0080145 Jy
! Component: 150  -  total flux cleaned = 0.00815454 Jy
! Component: 200  -  total flux cleaned = 0.00802036 Jy
! Total flux subtracted in 200 components = 0.00802036 Jy
! Clean residual min=-0.007011 max=0.012228 Jy/beam
! Clean residual mean=-0.000097 rms=0.003767 Jy/beam
! Combined flux in latest and established models = 0.853088 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 97 components and 0.853088 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=10.6 mas, bpa=-1.936 degrees
! Estimated noise=1007.86 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000512886 Jy
! Component: 100  -  total flux cleaned = -0.000497858 Jy
! Component: 150  -  total flux cleaned = -0.000488147 Jy
! Component: 200  -  total flux cleaned = -0.00060596 Jy
! Total flux subtracted in 200 components = -0.00060596 Jy
! Clean residual min=-0.006045 max=0.008717 Jy/beam
! Clean residual mean=-0.000055 rms=0.002385 Jy/beam
! Combined flux in latest and established models = 0.852482 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.852482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309706Jy  sigma=0.001426
! Fit after  self-cal, rms=0.309684Jy  sigma=0.001426
wmodel J0340-2119_S_1997_07_02_yyk\_map.mod
! Writing 117 model components to file: J0340-2119_S_1997_07_02_yyk_map.mod
wobs J0340-2119_S_1997_07_02_yyk\_uvs.fits
! Writing UV FITS file: J0340-2119_S_1997_07_02_yyk_uvs.fits
wwins J0340-2119_S_1997_07_02_yyk\_map.win
! wwins: Wrote 3 windows to J0340-2119_S_1997_07_02_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0039006 Jy
! Component: 100  -  total flux cleaned = 0.00732877 Jy
! Component: 150  -  total flux cleaned = 0.0102833 Jy
! Component: 200  -  total flux cleaned = 0.012188 Jy
! Component: 250  -  total flux cleaned = 0.0137492 Jy
! Component: 300  -  total flux cleaned = 0.0152054 Jy
! Component: 350  -  total flux cleaned = 0.0162994 Jy
! Component: 400  -  total flux cleaned = 0.0173292 Jy
! Component: 450  -  total flux cleaned = 0.0183042 Jy
! Component: 500  -  total flux cleaned = 0.0190733 Jy
! Component: 550  -  total flux cleaned = 0.0197296 Jy
! Component: 600  -  total flux cleaned = 0.0200769 Jy
! Component: 650  -  total flux cleaned = 0.0204755 Jy
! Component: 700  -  total flux cleaned = 0.0206686 Jy
! Component: 750  -  total flux cleaned = 0.0206687 Jy
! Component: 800  -  total flux cleaned = 0.0206085 Jy
! Component: 850  -  total flux cleaned = 0.0204928 Jy
! Component: 900  -  total flux cleaned = 0.0205489 Jy
! Component: 950  -  total flux cleaned = 0.0203883 Jy
! Component: 1000  -  total flux cleaned = 0.0203879 Jy
! Component: 1050  -  total flux cleaned = 0.0203352 Jy
! Component: 1100  -  total flux cleaned = 0.0201376 Jy
! Component: 1150  -  total flux cleaned = 0.020139 Jy
! Component: 1200  -  total flux cleaned = 0.0199978 Jy
! Component: 1250  -  total flux cleaned = 0.0199534 Jy
! Component: 1300  -  total flux cleaned = 0.0199539 Jy
! Component: 1350  -  total flux cleaned = 0.0199964 Jy
! Component: 1400  -  total flux cleaned = 0.0199104 Jy
! Component: 1450  -  total flux cleaned = 0.0198678 Jy
! Component: 1500  -  total flux cleaned = 0.0197453 Jy
! Component: 1550  -  total flux cleaned = 0.019665 Jy
! Component: 1600  -  total flux cleaned = 0.019546 Jy
! Component: 1650  -  total flux cleaned = 0.0192757 Jy
! Component: 1700  -  total flux cleaned = 0.0190868 Jy
! Component: 1750  -  total flux cleaned = 0.0189014 Jy
! Component: 1800  -  total flux cleaned = 0.0186841 Jy
! Component: 1850  -  total flux cleaned = 0.0186132 Jy
! Component: 1900  -  total flux cleaned = 0.0184714 Jy
! Component: 1950  -  total flux cleaned = 0.0182627 Jy
! Component: 2000  -  total flux cleaned = 0.0179892 Jy
! Total flux subtracted in 2048 components = 0.0177875 Jy
! Clean residual min=-0.001673 max=0.002562 Jy/beam
! Clean residual mean=-0.000034 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.87027 Jy
keep
! Adding 148 model components to the UV plane model.
! The established model now contains 264 components and 0.87027 Jy
![Exited script file: muppet]
wmap "J0340-2119_S_1997_07_02_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.775 x 10.6 at -1.936 degrees (North through East)
! Clean map  min=-0.0045054  max=0.64087 Jy/beam
! Writing clean map to FITS file: J0340-2119_S_1997_07_02_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.640867 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000720012 
device "J0340-2119_S_1997_07_02_yyk\_map.eps/VPS"
! Attempting to open device: 'J0340-2119_S_1997_07_02_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.337049 0.337049 0.674099 1.3482 2.69639 5.39279 10.7856 21.5712 43.1423 86.2846
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0021 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.64 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.775 x 10.6 at -1.936 degrees (North through East)
! Clean map  min=-0.0045054  max=0.64087 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0340-2119_S_1997_07_02_yyk\_map.gif/gif"
! Attempting to open device: 'J0340-2119_S_1997_07_02_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0340-2119_S_1997_07_02_yyk_uvs.log closed on Sun Jan  7 16:05:44 2007