! Started logfile: J0339-0146_X_1995_07_15_yyk_uvs.log on Mon Jan  8 02:45:08 2007
obs J0339-0146_X_1995_07_15_yyk_uva.fits
! Reading UV FITS file: J0339-0146_X_1995_07_15_yyk_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.779321 visibilities/baseline/integration-bin.
! Found source: J0339-0146
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15049e+09        4e+06          1        4e+06
!  02        2  8.23236e+09        4e+06          1        4e+06
!  03        3  8.41236e+09        4e+06          1        4e+06
!  04        4  8.55236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 788 lines of history.
! 
! Reading 10100 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0339-0146_X_1995_07_15_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.57376 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8199 mas, bmaj=1.876 mas, bpa=-5.672 degrees
! Estimated noise=1742.22 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.06904 Jy
! Component: 100  -  total flux cleaned = 1.40898 Jy
! Total flux subtracted in 100 components = 1.40898 Jy
! Clean residual min=-0.098123 max=0.183036 Jy/beam
! Clean residual mean=-0.000450 rms=0.035410 Jy/beam
! Combined flux in latest and established models = 1.40898 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.40898 Jy
! 
! Correcting IF 1.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.815942Jy  sigma=0.004655
! Fit after  self-cal, rms=0.813127Jy  sigma=0.004637
! Inverting map and beam 
! Estimated beam: bmin=0.8199 mas, bmaj=1.876 mas, bpa=-5.672 degrees
! Estimated noise=1742.22 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=2.283 mas, bpa=-7.426 degrees
! Estimated noise=1138.87 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.255615 Jy
! Component: 100  -  total flux cleaned = 0.360726 Jy
! Component: 150  -  total flux cleaned = 0.409375 Jy
! Component: 200  -  total flux cleaned = 0.418636 Jy
! Total flux subtracted in 200 components = 0.418636 Jy
! Clean residual min=-0.071137 max=0.135294 Jy/beam
! Clean residual mean=-0.000430 rms=0.025442 Jy/beam
! Combined flux in latest and established models = 1.82762 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 43 components and 1.82762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.780384Jy  sigma=0.004274
! Fit after  self-cal, rms=0.780092Jy  sigma=0.004272
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 2.283 at -7.426 degrees (North through East)
! Clean map  min=-0.069872  max=1.2618 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.945488
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.94     HN        1.45     KP        1.00     
!   LA        0.92     MK        0.99     NL        1.11     OV        1.00     
!   PT        0.96     SC        1.28     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.960263
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.90     HN        1.46     KP        1.00     
!   LA        0.91     MK        0.95     NL        1.08     OV        0.98     
!   PT        0.93     SC        1.30     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.937053
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.92     HN        1.60     KP        0.96     
!   LA        0.89     MK        0.96     NL        1.14     OV        1.00     
!   PT        0.93     SC        1.36     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.930188
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.93     HN        1.62     KP        1.01     
!   LA        0.89     MK        0.91     NL        1.13     OV        0.98     
!   PT        0.98     SC        1.34     
! 
! 
! Fit before self-cal, rms=0.780092Jy  sigma=0.004272
! Fit after  self-cal, rms=0.899571Jy  sigma=0.004160
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.899571Jy  sigma=0.004160
! Fit after  self-cal, rms=0.899729Jy  sigma=0.004160
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.466 mas, bpa=-10.61 degrees
! Estimated noise=1012.34 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.149355 Jy
! Component: 100  -  total flux cleaned = -0.199575 Jy
! Component: 150  -  total flux cleaned = -0.218648 Jy
! Component: 200  -  total flux cleaned = -0.22069 Jy
! Total flux subtracted in 200 components = -0.22069 Jy
! Clean residual min=-0.025586 max=0.054823 Jy/beam
! Clean residual mean=-0.000020 rms=0.009447 Jy/beam
! Combined flux in latest and established models = 1.60693 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 53 components and 1.60693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.881569Jy  sigma=0.003988
! Fit after  self-cal, rms=0.881304Jy  sigma=0.003987
! Inverting map 
! Added new window around map position (2.4, 1.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0365073 Jy
! Component: 100  -  total flux cleaned = 0.0290609 Jy
! Component: 150  -  total flux cleaned = 0.027371 Jy
! Component: 200  -  total flux cleaned = 0.0251334 Jy
! Total flux subtracted in 200 components = 0.0251334 Jy
! Clean residual min=-0.020455 max=0.029189 Jy/beam
! Clean residual mean=-0.000048 rms=0.006775 Jy/beam
! Combined flux in latest and established models = 1.63206 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 1.63206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.875559Jy  sigma=0.003958
! Fit after  self-cal, rms=0.875053Jy  sigma=0.003955
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.875053Jy  sigma=0.003955
! Fit after  self-cal, rms=0.663632Jy  sigma=0.003000
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357496 Jy
! Component: 100  -  total flux cleaned = 0.0402675 Jy
! Component: 150  -  total flux cleaned = 0.0379411 Jy
! Component: 200  -  total flux cleaned = 0.0368979 Jy
! Total flux subtracted in 200 components = 0.0368979 Jy
! Clean residual min=-0.037708 max=0.031085 Jy/beam
! Clean residual mean=0.000193 rms=0.008707 Jy/beam
! Combined flux in latest and established models = 1.66896 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 83 components and 1.66896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.649283Jy  sigma=0.002944
! Fit after  self-cal, rms=0.607957Jy  sigma=0.002769
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.034 x 2.466 at -10.61 degrees (North through East)
! Clean map  min=-0.045854  max=1.2363 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.607957Jy  sigma=0.002769
! Fit after  self-cal, rms=0.475706Jy  sigma=0.002653
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.475706Jy  sigma=0.002653
! Fit after  self-cal, rms=0.464021Jy  sigma=0.002602
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.416 mas, bpa=-9.652 degrees
! Estimated noise=994.831 mJy/beam.
! Added new window around map position (24.8, -12.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273284 Jy
! Component: 100  -  total flux cleaned = 0.0350078 Jy
! Component: 150  -  total flux cleaned = 0.0397641 Jy
! Component: 200  -  total flux cleaned = 0.0425823 Jy
! Total flux subtracted in 200 components = 0.0425823 Jy
! Clean residual min=-0.016764 max=0.019876 Jy/beam
! Clean residual mean=0.000123 rms=0.004250 Jy/beam
! Combined flux in latest and established models = 1.71154 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 110 components and 1.71154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.460662Jy  sigma=0.002585
! Fit after  self-cal, rms=0.454319Jy  sigma=0.002560
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.454319Jy  sigma=0.002560
! Fit after  self-cal, rms=0.440488Jy  sigma=0.002546
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.440488Jy  sigma=0.002546
! Fit after  self-cal, rms=0.436928Jy  sigma=0.002532
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.386 mas, bpa=-9.313 degrees
! Estimated noise=990.47 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148988 Jy
! Component: 100  -  total flux cleaned = 0.0170406 Jy
! Component: 150  -  total flux cleaned = 0.0180997 Jy
! Component: 200  -  total flux cleaned = 0.0190189 Jy
! Total flux subtracted in 200 components = 0.0190189 Jy
! Clean residual min=-0.014158 max=0.016000 Jy/beam
! Clean residual mean=0.000105 rms=0.003474 Jy/beam
! Combined flux in latest and established models = 1.73056 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 132 components and 1.73056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.435816Jy  sigma=0.002527
! Fit after  self-cal, rms=0.432629Jy  sigma=0.002514
! Inverting map 
! Added new window around map position (-21.6, -19.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160145 Jy
! Component: 100  -  total flux cleaned = 0.021894 Jy
! Component: 150  -  total flux cleaned = 0.024295 Jy
! Component: 200  -  total flux cleaned = 0.0261357 Jy
! Total flux subtracted in 200 components = 0.0261357 Jy
! Clean residual min=-0.011632 max=0.010898 Jy/beam
! Clean residual mean=0.000096 rms=0.002799 Jy/beam
! Combined flux in latest and established models = 1.75669 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 163 components and 1.75669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.431672Jy  sigma=0.002509
! Fit after  self-cal, rms=0.429045Jy  sigma=0.002499
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.391 mas, bmaj=3.822 mas, bpa=14.05 degrees
! Estimated noise=1205.1 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00717004 Jy
! Component: 100  -  total flux cleaned = 0.0100604 Jy
! Component: 150  -  total flux cleaned = 0.0107734 Jy
! Component: 200  -  total flux cleaned = 0.0112646 Jy
! Total flux subtracted in 200 components = 0.0112646 Jy
! Clean residual min=-0.010647 max=0.013660 Jy/beam
! Clean residual mean=0.000149 rms=0.003625 Jy/beam
! Combined flux in latest and established models = 1.76796 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 193 components and 1.76796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.428886Jy  sigma=0.002499
! Fit after  self-cal, rms=0.426654Jy  sigma=0.002490
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8291 mas, bmaj=1.911 mas, bpa=-6.821 degrees
! Estimated noise=1559.72 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.05779 Jy
! Component: 100  -  total flux cleaned = 1.38664 Jy
! Component: 150  -  total flux cleaned = 1.53396 Jy
! Component: 200  -  total flux cleaned = 1.61296 Jy
! Total flux subtracted in 200 components = 1.61296 Jy
! Clean residual min=-0.027707 max=0.041968 Jy/beam
! Clean residual mean=0.000271 rms=0.008688 Jy/beam
! Combined flux in latest and established models = 1.61296 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 1.61296 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.386 mas, bpa=-9.313 degrees
! Estimated noise=990.47 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0558574 Jy
! Component: 100  -  total flux cleaned = 0.0871207 Jy
! Component: 150  -  total flux cleaned = 0.106605 Jy
! Component: 200  -  total flux cleaned = 0.114338 Jy
! Total flux subtracted in 200 components = 0.114338 Jy
! Clean residual min=-0.015653 max=0.015263 Jy/beam
! Clean residual mean=0.000143 rms=0.003395 Jy/beam
! Combined flux in latest and established models = 1.72729 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 73 components and 1.72729 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.391 mas, bmaj=3.822 mas, bpa=14.05 degrees
! Estimated noise=1205.1 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169767 Jy
! Component: 100  -  total flux cleaned = 0.0277533 Jy
! Component: 150  -  total flux cleaned = 0.0329226 Jy
! Component: 200  -  total flux cleaned = 0.0356033 Jy
! Total flux subtracted in 200 components = 0.0356033 Jy
! Clean residual min=-0.011870 max=0.012592 Jy/beam
! Clean residual mean=0.000169 rms=0.003764 Jy/beam
! Combined flux in latest and established models = 1.7629 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 105 components and 1.7629 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.386 mas, bpa=-9.313 degrees
! Estimated noise=990.47 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00261277 Jy
! Component: 100  -  total flux cleaned = 0.000385184 Jy
! Component: 150  -  total flux cleaned = 0.00332245 Jy
! Component: 200  -  total flux cleaned = 0.00474859 Jy
! Total flux subtracted in 200 components = 0.00474859 Jy
! Clean residual min=-0.012183 max=0.009808 Jy/beam
! Clean residual mean=0.000085 rms=0.002740 Jy/beam
! Combined flux in latest and established models = 1.76765 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 121 components and 1.76765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.426135Jy  sigma=0.002489
! Fit after  self-cal, rms=0.424212Jy  sigma=0.002481
wmodel J0339-0146_X_1995_07_15_yyk\_map.mod
! Writing 121 model components to file: J0339-0146_X_1995_07_15_yyk_map.mod
wobs J0339-0146_X_1995_07_15_yyk\_uvs.fits
! Writing UV FITS file: J0339-0146_X_1995_07_15_yyk_uvs.fits
wwins J0339-0146_X_1995_07_15_yyk\_map.win
! wwins: Wrote 4 windows to J0339-0146_X_1995_07_15_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00402046 Jy
! Component: 100  -  total flux cleaned = -0.00532487 Jy
! Component: 150  -  total flux cleaned = -0.00416335 Jy
! Component: 200  -  total flux cleaned = -0.00279606 Jy
! Component: 250  -  total flux cleaned = -0.00240604 Jy
! Component: 300  -  total flux cleaned = -0.00215978 Jy
! Component: 350  -  total flux cleaned = -0.00168855 Jy
! Component: 400  -  total flux cleaned = -0.00135129 Jy
! Component: 450  -  total flux cleaned = -0.00113171 Jy
! Component: 500  -  total flux cleaned = -0.000811311 Jy
! Component: 550  -  total flux cleaned = -0.000605513 Jy
! Component: 600  -  total flux cleaned = -0.000406179 Jy
! Component: 650  -  total flux cleaned = -0.000212806 Jy
! Component: 700  -  total flux cleaned = -0.000116836 Jy
! Component: 750  -  total flux cleaned = 6.78378e-05 Jy
! Component: 800  -  total flux cleaned = 6.78083e-05 Jy
! Component: 850  -  total flux cleaned = 6.91962e-05 Jy
! Component: 900  -  total flux cleaned = 6.79614e-05 Jy
! Component: 950  -  total flux cleaned = -0.000264318 Jy
! Component: 1000  -  total flux cleaned = -0.000344198 Jy
! Component: 1050  -  total flux cleaned = -0.000344124 Jy
! Component: 1100  -  total flux cleaned = -0.000421652 Jy
! Component: 1150  -  total flux cleaned = -0.000801847 Jy
! Component: 1200  -  total flux cleaned = -0.000576004 Jy
! Component: 1250  -  total flux cleaned = -0.00042981 Jy
! Component: 1300  -  total flux cleaned = -0.00057467 Jy
! Component: 1350  -  total flux cleaned = -0.000574827 Jy
! Component: 1400  -  total flux cleaned = -0.000436037 Jy
! Component: 1450  -  total flux cleaned = -0.000367307 Jy
! Component: 1500  -  total flux cleaned = -0.00023297 Jy
! Component: 1550  -  total flux cleaned = -3.58123e-05 Jy
! Component: 1600  -  total flux cleaned = -0.000166137 Jy
! Component: 1650  -  total flux cleaned = 2.4263e-05 Jy
! Component: 1700  -  total flux cleaned = -0.000101949 Jy
! Component: 1750  -  total flux cleaned = -0.000100925 Jy
! Component: 1800  -  total flux cleaned = 8.17273e-05 Jy
! Component: 1850  -  total flux cleaned = -3.8145e-05 Jy
! Component: 1900  -  total flux cleaned = 2.16924e-05 Jy
! Component: 1950  -  total flux cleaned = 0.000253673 Jy
! Component: 2000  -  total flux cleaned = 0.000310803 Jy
! Total flux subtracted in 2048 components = 0.000310309 Jy
! Clean residual min=-0.003268 max=0.003099 Jy/beam
! Clean residual mean=0.000062 rms=0.001150 Jy/beam
! Combined flux in latest and established models = 1.76796 Jy
keep
! Adding 119 model components to the UV plane model.
! The established model now contains 240 components and 1.76796 Jy
![Exited script file: muppet]
wmap "J0339-0146_X_1995_07_15_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.028 x 2.386 at -9.313 degrees (North through East)
! Clean map  min=-0.0087778  max=1.1871 Jy/beam
! Writing clean map to FITS file: J0339-0146_X_1995_07_15_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.18715 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00115612 
device "J0339-0146_X_1995_07_15_yyk\_map.eps/VPS"
! Attempting to open device: 'J0339-0146_X_1995_07_15_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.29216 0.29216 0.58432 1.16864 2.33728 4.67456 9.34912 18.6982 37.3965 74.793
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0034 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.187 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.028 x 2.386 at -9.313 degrees (North through East)
! Clean map  min=-0.0087778  max=1.1871 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0339-0146_X_1995_07_15_yyk\_map.gif/gif"
! Attempting to open device: 'J0339-0146_X_1995_07_15_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0339-0146_X_1995_07_15_yyk_uvs.log closed on Mon Jan  8 02:45:16 2007