! Started logfile: J0339-0146_X_1995_04_19_yyk_uvs.log on Mon Jan 8 02:44:59 2007 obs J0339-0146_X_1995_04_19_yyk_uva.fits ! Reading UV FITS file: J0339-0146_X_1995_04_19_yyk_uva.fits ! AN table 1: 22 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.50404 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 4e+06 1 4e+06 ! 02 2 8.23236e+09 4e+06 1 4e+06 ! 03 3 8.41236e+09 4e+06 1 4e+06 ! 04 4 8.55236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 724 lines of history. ! ! Reading 1996 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_X_1995_04_19_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.38385 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.402 mas, bmaj=2.193 mas, bpa=33.48 degrees ! Estimated noise=3031.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.12661 Jy ! Component: 100 - total flux cleaned = 1.3895 Jy ! Total flux subtracted in 100 components = 1.3895 Jy ! Clean residual min=-0.077761 max=0.129948 Jy/beam ! Clean residual mean=-0.000799 rms=0.028874 Jy/beam ! Combined flux in latest and established models = 1.3895 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.3895 Jy ! ! Correcting IF 1. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.504038Jy sigma=0.003554 ! Fit after self-cal, rms=0.503211Jy sigma=0.003548 ! Inverting map and beam ! Estimated beam: bmin=1.402 mas, bmaj=2.193 mas, bpa=33.48 degrees ! Estimated noise=3031.39 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.66 mas, bmaj=2.421 mas, bpa=28.91 degrees ! Estimated noise=2208.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.148396 Jy ! Component: 100 - total flux cleaned = 0.206073 Jy ! Component: 150 - total flux cleaned = 0.231241 Jy ! Component: 200 - total flux cleaned = 0.237187 Jy ! Total flux subtracted in 200 components = 0.237187 Jy ! Clean residual min=-0.059502 max=0.111687 Jy/beam ! Clean residual mean=-0.000926 rms=0.026002 Jy/beam ! Combined flux in latest and established models = 1.62668 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 31 components and 1.62668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.499083Jy sigma=0.003341 ! Fit after self-cal, rms=0.499081Jy sigma=0.003340 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.66 x 2.421 at 28.91 degrees (North through East) ! Clean map min=-0.057917 max=1.3568 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.96531 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.05 KP 1.00* ! LA 0.89 MK 1.00* NL 0.96 OV 1.02 ! PT 1.54 SC 0.95 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.973544 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.92 HN 1.06 KP 1.00* ! LA 0.90 MK 1.00* NL 0.93 OV 0.99 ! PT 1.50 SC 1.01 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.937917 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.17 KP 1.00* ! LA 0.89 MK 1.00* NL 0.97 OV 1.02 ! PT 1.66 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.939358 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.13 KP 1.00* ! LA 0.89 MK 1.00* NL 0.97 OV 0.99 ! PT 1.62 SC 1.05 ! ! ! Fit before self-cal, rms=0.499081Jy sigma=0.003340 ! Fit after self-cal, rms=0.437695Jy sigma=0.003076 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.437695Jy sigma=0.003076 ! Fit after self-cal, rms=0.437532Jy sigma=0.003074 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.673 mas, bmaj=2.448 mas, bpa=30.32 degrees ! Estimated noise=1994.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.108753 Jy ! Component: 100 - total flux cleaned = -0.128508 Jy ! Component: 150 - total flux cleaned = -0.133101 Jy ! Component: 200 - total flux cleaned = -0.133524 Jy ! Total flux subtracted in 200 components = -0.133524 Jy ! Clean residual min=-0.018058 max=0.018208 Jy/beam ! Clean residual mean=-0.000084 rms=0.005462 Jy/beam ! Combined flux in latest and established models = 1.49316 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 1.49316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419539Jy sigma=0.002901 ! Fit after self-cal, rms=0.419580Jy sigma=0.002901 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419580Jy sigma=0.002901 ! Fit after self-cal, rms=0.384916Jy sigma=0.002571 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00778749 Jy ! Component: 100 - total flux cleaned = 0.00902483 Jy ! Component: 150 - total flux cleaned = 0.00934473 Jy ! Component: 200 - total flux cleaned = 0.00933281 Jy ! Total flux subtracted in 200 components = 0.00933281 Jy ! Clean residual min=-0.016459 max=0.018043 Jy/beam ! Clean residual mean=-0.000112 rms=0.004706 Jy/beam ! Combined flux in latest and established models = 1.50249 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 1.50249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.384266Jy sigma=0.002565 ! Fit after self-cal, rms=0.376817Jy sigma=0.002492 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.673 x 2.448 at 30.32 degrees (North through East) ! Clean map min=-0.014113 max=1.2611 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376817Jy sigma=0.002492 ! Fit after self-cal, rms=0.374040Jy sigma=0.002469 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374040Jy sigma=0.002469 ! Fit after self-cal, rms=0.372502Jy sigma=0.002451 ! Inverting map and beam ! Estimated beam: bmin=1.678 mas, bmaj=2.436 mas, bpa=29.8 degrees ! Estimated noise=1985.53 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101395 Jy ! Component: 100 - total flux cleaned = 0.00121881 Jy ! Component: 150 - total flux cleaned = 0.00155777 Jy ! Component: 200 - total flux cleaned = 0.00185644 Jy ! Total flux subtracted in 200 components = 0.00185644 Jy ! Clean residual min=-0.011074 max=0.014483 Jy/beam ! Clean residual mean=-0.000063 rms=0.003760 Jy/beam ! Combined flux in latest and established models = 1.50435 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 1.50435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372448Jy sigma=0.002450 ! Fit after self-cal, rms=0.372101Jy sigma=0.002445 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372101Jy sigma=0.002445 ! Fit after self-cal, rms=0.372532Jy sigma=0.002438 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372532Jy sigma=0.002438 ! Fit after self-cal, rms=0.372500Jy sigma=0.002437 ! Inverting map and beam ! Estimated beam: bmin=1.679 mas, bmaj=2.437 mas, bpa=29.96 degrees ! Estimated noise=1983.88 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124002 Jy ! Component: 100 - total flux cleaned = -0.000921459 Jy ! Component: 150 - total flux cleaned = -0.000776557 Jy ! Component: 200 - total flux cleaned = -0.000644217 Jy ! Total flux subtracted in 200 components = -0.000644217 Jy ! Clean residual min=-0.010699 max=0.014246 Jy/beam ! Clean residual mean=-0.000072 rms=0.003612 Jy/beam ! Combined flux in latest and established models = 1.5037 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 1.5037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372449Jy sigma=0.002437 ! Fit after self-cal, rms=0.372384Jy sigma=0.002436 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=2.853 mas, bpa=-3.345 degrees ! Estimated noise=2207.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032591 Jy ! Component: 100 - total flux cleaned = 0.00326837 Jy ! Component: 150 - total flux cleaned = 0.00326565 Jy ! Component: 200 - total flux cleaned = 0.00326921 Jy ! Total flux subtracted in 200 components = 0.00326921 Jy ! Clean residual min=-0.009458 max=0.015291 Jy/beam ! Clean residual mean=-0.000087 rms=0.003919 Jy/beam ! Combined flux in latest and established models = 1.50697 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 69 components and 1.50697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372420Jy sigma=0.002435 ! Fit after self-cal, rms=0.372335Jy sigma=0.002434 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.403 mas, bmaj=2.211 mas, bpa=34.23 degrees ! Estimated noise=2805.03 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.05308 Jy ! Component: 100 - total flux cleaned = 1.29108 Jy ! Component: 150 - total flux cleaned = 1.39346 Jy ! Component: 200 - total flux cleaned = 1.44437 Jy ! Total flux subtracted in 200 components = 1.44437 Jy ! Clean residual min=-0.017969 max=0.020243 Jy/beam ! Clean residual mean=-0.000183 rms=0.005747 Jy/beam ! Combined flux in latest and established models = 1.44437 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.44437 Jy ! Inverting map and beam ! Estimated beam: bmin=1.679 mas, bmaj=2.437 mas, bpa=29.96 degrees ! Estimated noise=1983.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339095 Jy ! Component: 100 - total flux cleaned = 0.05053 Jy ! Component: 150 - total flux cleaned = 0.0556555 Jy ! Component: 200 - total flux cleaned = 0.058346 Jy ! Total flux subtracted in 200 components = 0.058346 Jy ! Clean residual min=-0.010893 max=0.013847 Jy/beam ! Clean residual mean=-0.000084 rms=0.003738 Jy/beam ! Combined flux in latest and established models = 1.50271 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 1.50271 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=2.853 mas, bpa=-3.345 degrees ! Estimated noise=2207.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637633 Jy ! Component: 100 - total flux cleaned = 0.00663044 Jy ! Component: 150 - total flux cleaned = 0.00675125 Jy ! Component: 200 - total flux cleaned = 0.00664743 Jy ! Total flux subtracted in 200 components = 0.00664743 Jy ! Clean residual min=-0.009782 max=0.015259 Jy/beam ! Clean residual mean=-0.000086 rms=0.004087 Jy/beam ! Combined flux in latest and established models = 1.50936 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 1.50936 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.679 mas, bmaj=2.437 mas, bpa=29.96 degrees ! Estimated noise=1983.88 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125251 Jy ! Component: 100 - total flux cleaned = -0.00139678 Jy ! Component: 150 - total flux cleaned = -0.00151892 Jy ! Component: 200 - total flux cleaned = -0.00163262 Jy ! Total flux subtracted in 200 components = -0.00163262 Jy ! Clean residual min=-0.010318 max=0.012630 Jy/beam ! Clean residual mean=-0.000063 rms=0.003466 Jy/beam ! Combined flux in latest and established models = 1.50773 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 1.50773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372261Jy sigma=0.002434 ! Fit after self-cal, rms=0.372152Jy sigma=0.002433 wmodel J0339-0146_X_1995_04_19_yyk\_map.mod ! Writing 44 model components to file: J0339-0146_X_1995_04_19_yyk_map.mod wobs J0339-0146_X_1995_04_19_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_X_1995_04_19_yyk_uvs.fits wwins J0339-0146_X_1995_04_19_yyk\_map.win ! wwins: Wrote 1 windows to J0339-0146_X_1995_04_19_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483746 Jy ! Component: 100 - total flux cleaned = 0.00722131 Jy ! Component: 150 - total flux cleaned = 0.00955806 Jy ! Component: 200 - total flux cleaned = 0.0110803 Jy ! Component: 250 - total flux cleaned = 0.0126234 Jy ! Component: 300 - total flux cleaned = 0.014051 Jy ! Component: 350 - total flux cleaned = 0.0153757 Jy ! Component: 400 - total flux cleaned = 0.0166083 Jy ! Component: 450 - total flux cleaned = 0.017758 Jy ! Component: 500 - total flux cleaned = 0.0183463 Jy ! Component: 550 - total flux cleaned = 0.0188076 Jy ! Component: 600 - total flux cleaned = 0.0192445 Jy ! Component: 650 - total flux cleaned = 0.0198265 Jy ! Component: 700 - total flux cleaned = 0.0202283 Jy ! Component: 750 - total flux cleaned = 0.0210837 Jy ! Component: 800 - total flux cleaned = 0.02221 Jy ! Component: 850 - total flux cleaned = 0.0229361 Jy ! Component: 900 - total flux cleaned = 0.0235711 Jy ! Component: 950 - total flux cleaned = 0.0243949 Jy ! Component: 1000 - total flux cleaned = 0.024996 Jy ! Component: 1050 - total flux cleaned = 0.0257778 Jy ! Component: 1100 - total flux cleaned = 0.0263494 Jy ! Component: 1150 - total flux cleaned = 0.026909 Jy ! Component: 1200 - total flux cleaned = 0.0273947 Jy ! Component: 1250 - total flux cleaned = 0.027574 Jy ! Component: 1300 - total flux cleaned = 0.0276915 Jy ! Component: 1350 - total flux cleaned = 0.02775 Jy ! Component: 1400 - total flux cleaned = 0.027806 Jy ! Component: 1450 - total flux cleaned = 0.0278614 Jy ! Component: 1500 - total flux cleaned = 0.0278612 Jy ! Component: 1550 - total flux cleaned = 0.0280218 Jy ! Component: 1600 - total flux cleaned = 0.0281278 Jy ! Component: 1650 - total flux cleaned = 0.0284412 Jy ! Component: 1700 - total flux cleaned = 0.0286996 Jy ! Component: 1750 - total flux cleaned = 0.0289559 Jy ! Component: 1800 - total flux cleaned = 0.0292095 Jy ! Component: 1850 - total flux cleaned = 0.029411 Jy ! Component: 1900 - total flux cleaned = 0.0295603 Jy ! Component: 1950 - total flux cleaned = 0.0297588 Jy ! Component: 2000 - total flux cleaned = 0.0299559 Jy ! Total flux subtracted in 2048 components = 0.0302003 Jy ! Clean residual min=-0.002681 max=0.003251 Jy/beam ! Clean residual mean=-0.000038 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 1.53793 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 179 components and 1.53793 Jy ![Exited script file: muppet] wmap "J0339-0146_X_1995_04_19_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.679 x 2.437 at 29.96 degrees (North through East) ! Clean map min=-0.0044269 max=1.2584 Jy/beam ! Writing clean map to FITS file: J0339-0146_X_1995_04_19_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.2584 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000947451 device "J0339-0146_X_1995_04_19_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_X_1995_04_19_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.225871 0.225871 0.451742 0.903484 1.80697 3.61393 7.22787 14.4557 28.9115 57.8229 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.258 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.679 x 2.437 at 29.96 degrees (North through East) ! Clean map min=-0.0044269 max=1.2584 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_X_1995_04_19_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_X_1995_04_19_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_X_1995_04_19_yyk_uvs.log closed on Mon Jan 8 02:45:05 2007