! Started logfile: J0339-0146_X_1994_08_12_yyk_uvs.log on Mon Jan 8 02:44:50 2007 obs J0339-0146_X_1994_08_12_yyk_uva.fits ! Reading UV FITS file: J0339-0146_X_1994_08_12_yyk_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.793086 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 4e+06 1 4e+06 ! 02 2 8.23236e+09 4e+06 1 4e+06 ! 03 3 8.41236e+09 4e+06 1 4e+06 ! 04 4 8.55236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 783 lines of history. ! ! Reading 6424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_X_1994_08_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.72473 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9761 mas, bmaj=1.858 mas, bpa=-2.455 degrees ! Estimated noise=1828.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.26926 Jy ! Component: 100 - total flux cleaned = 1.67233 Jy ! Total flux subtracted in 100 components = 1.67233 Jy ! Clean residual min=-0.101379 max=0.184514 Jy/beam ! Clean residual mean=0.000664 rms=0.033979 Jy/beam ! Combined flux in latest and established models = 1.67233 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.67233 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.563359Jy sigma=0.004644 ! Fit after self-cal, rms=0.559651Jy sigma=0.004620 ! Inverting map and beam ! Estimated beam: bmin=0.9761 mas, bmaj=1.858 mas, bpa=-2.455 degrees ! Estimated noise=1829.18 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.291 mas, bmaj=2.368 mas, bpa=3.004 degrees ! Estimated noise=1058.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.322436 Jy ! Component: 100 - total flux cleaned = 0.442192 Jy ! Component: 150 - total flux cleaned = 0.497658 Jy ! Component: 200 - total flux cleaned = 0.513809 Jy ! Total flux subtracted in 200 components = 0.513809 Jy ! Clean residual min=-0.056526 max=0.111383 Jy/beam ! Clean residual mean=0.000079 rms=0.015904 Jy/beam ! Combined flux in latest and established models = 2.18613 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 2.18614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.460559Jy sigma=0.003469 ! Fit after self-cal, rms=0.460153Jy sigma=0.003466 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726901 Jy ! Component: 100 - total flux cleaned = 0.0674844 Jy ! Component: 150 - total flux cleaned = 0.0574953 Jy ! Component: 200 - total flux cleaned = 0.0542064 Jy ! Total flux subtracted in 200 components = 0.0542064 Jy ! Clean residual min=-0.048805 max=0.067737 Jy/beam ! Clean residual mean=-0.000066 rms=0.012825 Jy/beam ! Combined flux in latest and established models = 2.24034 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 63 components and 2.24034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428146Jy sigma=0.003226 ! Fit after self-cal, rms=0.425825Jy sigma=0.003207 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.291 x 2.368 at 3.004 degrees (North through East) ! Clean map min=-0.047387 max=1.5857 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.971907 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.93 KP 1.01 ! LA 0.99 MK 1.39 NL 1.02 OV 1.03 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.965655 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.95 KP 1.01 ! LA 0.99 MK 1.42 NL 0.99 OV 1.06 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.960611 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.96 KP 0.96 ! LA 1.00 MK 1.42 NL 1.04 OV 1.04 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.957756 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.97 KP 1.02 ! LA 0.99 MK 1.38 NL 1.03 OV 1.02 ! PT 1.01 SC 1.02 ! ! ! Fit before self-cal, rms=0.425825Jy sigma=0.003207 ! Fit after self-cal, rms=0.450063Jy sigma=0.003275 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450063Jy sigma=0.003275 ! Fit after self-cal, rms=0.450068Jy sigma=0.003275 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.399 mas, bmaj=2.545 mas, bpa=10.87 degrees ! Estimated noise=1003.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.129813 Jy ! Component: 100 - total flux cleaned = -0.151918 Jy ! Component: 150 - total flux cleaned = -0.156877 Jy ! Component: 200 - total flux cleaned = -0.159037 Jy ! Total flux subtracted in 200 components = -0.159037 Jy ! Clean residual min=-0.032550 max=0.033013 Jy/beam ! Clean residual mean=-0.000035 rms=0.007786 Jy/beam ! Combined flux in latest and established models = 2.0813 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 88 components and 2.08131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417509Jy sigma=0.002990 ! Fit after self-cal, rms=0.417252Jy sigma=0.002988 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417252Jy sigma=0.002988 ! Fit after self-cal, rms=0.372548Jy sigma=0.002541 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00829627 Jy ! Component: 100 - total flux cleaned = 0.00634191 Jy ! Component: 150 - total flux cleaned = 0.00463185 Jy ! Component: 200 - total flux cleaned = 0.00306576 Jy ! Total flux subtracted in 200 components = 0.00306576 Jy ! Clean residual min=-0.032005 max=0.030796 Jy/beam ! Clean residual mean=0.000021 rms=0.007505 Jy/beam ! Combined flux in latest and established models = 2.08437 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 99 components and 2.08437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365802Jy sigma=0.002505 ! Fit after self-cal, rms=0.360433Jy sigma=0.002448 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.399 x 2.545 at 10.87 degrees (North through East) ! Clean map min=-0.032128 max=1.5572 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360433Jy sigma=0.002448 ! Fit after self-cal, rms=1.063556Jy sigma=0.002130 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.063556Jy sigma=0.002130 ! Fit after self-cal, rms=1.063498Jy sigma=0.002119 ! Inverting map and beam ! Estimated beam: bmin=1.34 mas, bmaj=2.525 mas, bpa=9.082 degrees ! Estimated noise=998.743 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226973 Jy ! Component: 100 - total flux cleaned = 0.00141525 Jy ! Component: 150 - total flux cleaned = 0.00131297 Jy ! Component: 200 - total flux cleaned = 0.000666452 Jy ! Total flux subtracted in 200 components = 0.000666452 Jy ! Clean residual min=-0.019469 max=0.016984 Jy/beam ! Clean residual mean=-0.000042 rms=0.004573 Jy/beam ! Combined flux in latest and established models = 2.08504 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 118 components and 2.08504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.062525Jy sigma=0.002088 ! Fit after self-cal, rms=1.062256Jy sigma=0.002083 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.062256Jy sigma=0.002083 ! Fit after self-cal, rms=1.180049Jy sigma=0.002076 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.180049Jy sigma=0.002076 ! Fit after self-cal, rms=1.179752Jy sigma=0.002075 ! Inverting map and beam ! Estimated beam: bmin=1.334 mas, bmaj=2.519 mas, bpa=8.822 degrees ! Estimated noise=996.042 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000770198 Jy ! Component: 100 - total flux cleaned = 0.000748954 Jy ! Component: 150 - total flux cleaned = 0.00131017 Jy ! Component: 200 - total flux cleaned = 0.00080093 Jy ! Total flux subtracted in 200 components = 0.00080093 Jy ! Clean residual min=-0.016790 max=0.014369 Jy/beam ! Clean residual mean=-0.000029 rms=0.003944 Jy/beam ! Combined flux in latest and established models = 2.08584 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 124 components and 2.08584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.179149Jy sigma=0.002057 ! Fit after self-cal, rms=1.178951Jy sigma=0.002055 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.412 mas, bmaj=3.713 mas, bpa=12.37 degrees ! Estimated noise=1135.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00066255 Jy ! Component: 100 - total flux cleaned = 0.00239729 Jy ! Component: 150 - total flux cleaned = 0.00240079 Jy ! Component: 200 - total flux cleaned = 0.00209629 Jy ! Total flux subtracted in 200 components = 0.00209629 Jy ! Clean residual min=-0.015738 max=0.011870 Jy/beam ! Clean residual mean=-0.000051 rms=0.003630 Jy/beam ! Combined flux in latest and established models = 2.08793 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 133 components and 2.08793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.178744Jy sigma=0.002048 ! Fit after self-cal, rms=1.178603Jy sigma=0.002046 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9923 mas, bmaj=1.962 mas, bpa=3.729 degrees ! Estimated noise=1916.78 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.30401 Jy ! Component: 100 - total flux cleaned = 1.65583 Jy ! Component: 150 - total flux cleaned = 1.83005 Jy ! Component: 200 - total flux cleaned = 1.92819 Jy ! Total flux subtracted in 200 components = 1.92819 Jy ! Clean residual min=-0.022633 max=0.037423 Jy/beam ! Clean residual mean=0.000150 rms=0.007707 Jy/beam ! Combined flux in latest and established models = 1.92819 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 1.92819 Jy ! Inverting map and beam ! Estimated beam: bmin=1.334 mas, bmaj=2.519 mas, bpa=8.822 degrees ! Estimated noise=996.042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797899 Jy ! Component: 100 - total flux cleaned = 0.116496 Jy ! Component: 150 - total flux cleaned = 0.136584 Jy ! Component: 200 - total flux cleaned = 0.146093 Jy ! Total flux subtracted in 200 components = 0.146093 Jy ! Clean residual min=-0.011845 max=0.012977 Jy/beam ! Clean residual mean=-0.000009 rms=0.003294 Jy/beam ! Combined flux in latest and established models = 2.07429 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 77 components and 2.07429 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.412 mas, bmaj=3.713 mas, bpa=12.37 degrees ! Estimated noise=1135.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887176 Jy ! Component: 100 - total flux cleaned = 0.0103915 Jy ! Component: 150 - total flux cleaned = 0.0107171 Jy ! Component: 200 - total flux cleaned = 0.0111431 Jy ! Total flux subtracted in 200 components = 0.0111431 Jy ! Clean residual min=-0.013954 max=0.013088 Jy/beam ! Clean residual mean=-0.000062 rms=0.003259 Jy/beam ! Combined flux in latest and established models = 2.08543 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 2.08543 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.334 mas, bmaj=2.519 mas, bpa=8.822 degrees ! Estimated noise=996.042 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00235723 Jy ! Component: 100 - total flux cleaned = -0.00183329 Jy ! Component: 150 - total flux cleaned = -0.00136731 Jy ! Component: 200 - total flux cleaned = -0.000544125 Jy ! Total flux subtracted in 200 components = -0.000544125 Jy ! Clean residual min=-0.009888 max=0.012811 Jy/beam ! Clean residual mean=-0.000040 rms=0.002964 Jy/beam ! Combined flux in latest and established models = 2.08489 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 2.08489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.177795Jy sigma=0.002023 ! Fit after self-cal, rms=1.176920Jy sigma=0.002019 wmodel J0339-0146_X_1994_08_12_yyk\_map.mod ! Writing 104 model components to file: J0339-0146_X_1994_08_12_yyk_map.mod wobs J0339-0146_X_1994_08_12_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_X_1994_08_12_yyk_uvs.fits wwins J0339-0146_X_1994_08_12_yyk\_map.win ! wwins: Wrote 2 windows to J0339-0146_X_1994_08_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264519 Jy ! Component: 100 - total flux cleaned = 0.00128108 Jy ! Component: 150 - total flux cleaned = -0.000147229 Jy ! Component: 200 - total flux cleaned = -0.00119945 Jy ! Component: 250 - total flux cleaned = -0.00234386 Jy ! Component: 300 - total flux cleaned = -0.00289168 Jy ! Component: 350 - total flux cleaned = -0.00354727 Jy ! Component: 400 - total flux cleaned = -0.00443211 Jy ! Component: 450 - total flux cleaned = -0.00492103 Jy ! Component: 500 - total flux cleaned = -0.00552004 Jy ! Component: 550 - total flux cleaned = -0.00633389 Jy ! Component: 600 - total flux cleaned = -0.00689874 Jy ! Component: 650 - total flux cleaned = -0.00712313 Jy ! Component: 700 - total flux cleaned = -0.00787449 Jy ! Component: 750 - total flux cleaned = -0.0080805 Jy ! Component: 800 - total flux cleaned = -0.00828171 Jy ! Component: 850 - total flux cleaned = -0.00818299 Jy ! Component: 900 - total flux cleaned = -0.00837999 Jy ! Component: 950 - total flux cleaned = -0.00847328 Jy ! Component: 1000 - total flux cleaned = -0.00809737 Jy ! Component: 1050 - total flux cleaned = -0.00791081 Jy ! Component: 1100 - total flux cleaned = -0.00772852 Jy ! Component: 1150 - total flux cleaned = -0.00719363 Jy ! Component: 1200 - total flux cleaned = -0.00693111 Jy ! Component: 1250 - total flux cleaned = -0.00675977 Jy ! Component: 1300 - total flux cleaned = -0.00642055 Jy ! Component: 1350 - total flux cleaned = -0.00650419 Jy ! Component: 1400 - total flux cleaned = -0.00617416 Jy ! Component: 1450 - total flux cleaned = -0.00576885 Jy ! Component: 1500 - total flux cleaned = -0.0055285 Jy ! Component: 1550 - total flux cleaned = -0.00505604 Jy ! Component: 1600 - total flux cleaned = -0.00489987 Jy ! Component: 1650 - total flux cleaned = -0.00459332 Jy ! Component: 1700 - total flux cleaned = -0.00414027 Jy ! Component: 1750 - total flux cleaned = -0.0039158 Jy ! Component: 1800 - total flux cleaned = -0.00362218 Jy ! Component: 1850 - total flux cleaned = -0.00333279 Jy ! Component: 1900 - total flux cleaned = -0.00326132 Jy ! Component: 1950 - total flux cleaned = -0.00304788 Jy ! Component: 2000 - total flux cleaned = -0.00276828 Jy ! Total flux subtracted in 2048 components = -0.00262934 Jy ! Clean residual min=-0.003896 max=0.004064 Jy/beam ! Clean residual mean=-0.000021 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 2.08226 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 234 components and 2.08226 Jy ![Exited script file: muppet] wmap "J0339-0146_X_1994_08_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.334 x 2.519 at 8.822 degrees (North through East) ! Clean map min=-0.0073254 max=1.575 Jy/beam ! Writing clean map to FITS file: J0339-0146_X_1994_08_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.57504 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00135196 device "J0339-0146_X_1994_08_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_X_1994_08_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.257511 0.257511 0.515021 1.03004 2.06009 4.12017 8.24034 16.4807 32.9614 65.9227 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.575 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.334 x 2.519 at 8.822 degrees (North through East) ! Clean map min=-0.0073254 max=1.575 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_X_1994_08_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_X_1994_08_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_X_1994_08_12_yyk_uvs.log closed on Mon Jan 8 02:44:58 2007